An analysis of the complexation between poly(aspartic acid) and poly(ethylene glycol)

The compatibility between poly(aspartic acid) and poly(ethylene glycol) for the formation of an interpolymer complex (IPC) was investigated by dynamic rheology and evaluation of zeta potential values. The homogeneity of the realized IPC was observed by near infrared chemical imagistic (NIR-CI) technique. The data were sustained and underlined by the assessment of the compatibility between the polymeric compounds.     

Micellization and Thermogelation of Poly(ether urethane)s Comprising Poly(ethylene glycol) and Poly(propylene glycol)

A series of multiblock poly(ether urethane)s comprising poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) segments were synthesized. Their aqueous solutions exhibited thermogelling behavior at critical gelation concentrations (CGC) ranging from 8 to 12 wt%. The composition and structural information of the copolymers were studied by GPC and ¹H NMR. The critical micellization concentration (CMC) and thermodynamic parameters for micelle formation were determined at different temperatures. The temperature response of the copolymer solutions were studied and found to be associated with the composition of the copolymers.     

胆固醇修饰的低分子量聚乙烯亚胺接枝化聚[L-天冬酰胺-co-L-赖氨酸]作为基因载体的性能研究

通过将低分子量的聚乙烯亚胺(PEI600)及其胆固醇衍生物与聚(L-天冬酰胺-co-L-赖氨酸)(PSL)进行开环反应, 合成了一类新型的肿瘤靶向基因载体, 研究了这类载体与DNA形成复合物的性质以及介导绿色荧光蛋白质粒pEGFP-C1转染不同细胞的性能. 结果表明, 在复合质量比大于5∶1时, 各载体均能与DNA形成结构稳定的复合物. 同时转染实验结果证明, 通过在侧链引入一定数目的胆固醇, 可以明显提高载体对于癌细胞HepG2和Hela的转染效率. 这类新型的载体具有良好的细胞相容性、较高的转染效率以及易于进行靶向修饰等特点, 在基因治疗研究领域中将具有较好的潜在应用价值.     

甲氧基聚乙二醇-b-聚L-半胱氨酸两亲性嵌段共聚物的合成与表征

首先以聚乙二醇单甲醚(mPEG-OH)为单体,采用经典的盖布瑞尔伯胺合成法合成了端氨基聚乙二醇单甲醚(mPEG-NH_2);然后以mPEG-NH_2为引发剂,S-苄基L-半胱氨酸N-羧酸内酸酐(BCys-NCA)为原料,通过N-羧酸内酸酐(NCA)开环聚合反应和液氨/钠处理脱除侧链上的保护基团,合成了两亲性嵌段共聚物甲氧基聚乙二醇-b-聚L-半胱氨酸(mPEG-b-PCys)。采用傅里叶变换红外光谱、核磁共振氢谱对聚合物的结构和组成进行了表征。结果表明:成功制备了侧链具有还原性巯基的两亲性嵌段共聚物mPEG-b-PCys,并且其聚合度可控性良好。     

Multifunctional Poly(ethylene glycol)s

In the rapidly evolving multidisciplinary field of polymer therapeutics, tailored polymer structures represent the key constituent to explore and harvest the potential of bioactive macromolecular hybrid structures. In light of the recent developments for anticancer drug conjugates, multifunctional polymers are becoming ever more relevant as drug carriers. However, the potentially best suited polymer, poly(ethylene glycol) (PEG), is unfavorable owing to its limited functionality. Therefore, multifunctional linear copolymers (mf‐PEGs) based on ethylene oxide (EO) and appropriate epoxide comonomers are attracting increased attention. Precisely engineered via living anionic polymerization and defined with state‐of‐the‐art characterization techniques—for example real‐time ¹H NMR spectroscopy monitoring of the EO polymerization kinetics—this emerging class of polymers embodies a powerful platform for bio‐ and drug conjugation.     

Poly(ethylene glycol)-based shape-memory polymers

Poly(ethylene glycol) (PEG) blends photo-curable and thermal activated shape-memory polymers (SMPs), with different activation temperature (T_switch), have been synthesized and characterized. PEG blends with different molecular weights were chain-end functionalized with isocyanate ethyl methacrylate and photo-cured with UV lamp. Degree of cross-linking of the blend network, determined by gel content measurement, resulted as higher than 95%. The thermal and thermomechanical properties of these SMPs PEG blends were characterized by differential scanning calorimetry and dynamic mechanical analysis. The shape-memory properties of the networks were quantified using thermomechanical three-point bending experiments and showed strain fixity rates higher than 99% and a minimum strain recovery ratio of 82%.     

Synthesis and Characterization of Calix[4]arene Functionalized Poly(ethylene glycol) Derivatives

Calix[4]arenes with both ligating and methoxy poly(ethylene glycol) groups appended have been synthesized using several approaches, involving the formation of sulfonyl ester groups on the wide rim, Schiff base derivatives on the narrow rim, and thioether groups on both the wide and narrow rims. These new derivatives have been characterized by a combination of infrared and ¹H NMR spectroscopy. Compounds 10 and 11 are insoluble in both water and aqueous poly(ethylene glycol), but the other new compounds are soluble.     

New Poly(propylene glycol)‐ and Poly(ethylene glycol)‐Based Polymer Gelators with L‐Lysine

Summary: New polymer gelators consisting of poly(propylene glycol) or poly(ethylene glycol) and L ‐lysine‐based low‐molecular‐weight gelators have been developed. These polymer gelators were synthesized according to a simple procedure with high reaction yield, and formed organogels in many organic solvents. The organogelation mechanism was proposed from the transmission electron microscopy and FTIR spectroscopy studies.

Structures of the polymer gelators synthesized here.     

Poly（L—lactide）—Poly（ethylene glycol） Multiblock Copolymers：Synthesis and Properties

Poly (L-lactide)-poly (ethylene glycol) multiblock copolymers with predetermined block lengths were synthesized by polycondensation of PLA diols and PEG diacids. These copolymers presented special properties, such as better miscibility between the two components, low crystallinity and better hydrophilicity, which can be modulated by adjusting the block lengths of the two components.     

Poly(ethylene glycol) Surface Coated Magnetic Particles

Summary: A methacrylate‐functionalized poly(ethylene glycol) macromonomer was copolymerized at the surface of methacrylate‐derivatized maghemite nanoparticles. After silylation of the magnetic core with methacryloxypropyltrimethoxysilane, two grafting procedures based on either a direct copolymerization reaction in water or an inverse emulsion polymerization were compared. A direct copolymerization led to low polymer surface amounts, whereas an inverse emulsion process allowed nanocomposite particles containing up to 90 wt.‐% polymer to be obtained.

TEM picture of maghemite‐PEG hybrid particles.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Poly (caprolactone)/poly (ethylene glycol) pervaporation blend membranes: Synthesis,characterization, and performance

Poly (caprolactone) membranes with addition of different poly (ethylene glycol) concentrations were prepared for separation of water/isopropanol azeotropic mixture by pervaporation process. Different characterization tests including Fourier transform infrared, scanning electron microscopy, water contact angle, and thermogravimetric analysis were carried out on the prepared membranes. In addition, the effect of poly (ethylene glycol) PEG content on the swelling degree and the performance of the prepared membranes in pervaporation process were investigated. According to the obtained results, all the membranes were water selective and the blend membrane containing 3 wt% PEG exhibited the best pervaporation performance with a water flux of 0.517 kg/m² hour and separation factor of 1642 at the ambient temperature. Hydrophilicity improvement of the blend membranes was confirmed by constant decrease in water contact angle of the membranes as PEG content increased in the casting solution. Scanning electron microscopy cross‐sectional images indicated that the blend membranes containing PEG had a closed cellular structure. Furthermore, mechanical and thermal properties of the membranes decreased by adding PEG.     

叶酸和聚乙二醇接枝作基因载体用壳聚糖的合成与表征

本研究将叶酸和聚乙二醇接枝到四种不同分子量的壳聚糖氨基侧链上,以改善壳聚糖的靶向性和水溶性作基因载体。用FTIE、1HNMR、UV-Vis、DSC和TEM对产物进行了表征,结果表明,叶酸和聚乙二醇被成功地接枝到壳聚糖上,所制得的载体有望作为潜在的肿瘤细胞靶向基因载体。     

Super Molecular-polarization Phenomenon of Poly (ethylene glycol) in Deionized Water

A new discovery describing nonionic surfactant poly(ethylene glycol) being added into deionized water, electrical conductivity of the water would show a remarkable increase phenomenon. The mechanism study indicated that the electrical conductivity increase of the water doped some PEG was formed by super-polarization of a PEG molecule on the water molecule. A PEG molecule can form a super polarization body in the water, which will generate a strong polarization effect on the water molecule, thereby increasing water ionization degree and makes the electrical conductivity of water greater.     

新型结合阿霉素的聚乙二醇嵌段共聚树枝状聚赖氨酸的合成及其药物缓释行为的研究

采用液相多肽合成方法, 成功制备得到窄分子量分布、结构确定的聚乙二醇嵌段共聚四代树枝状聚赖氨酸 (MPEG-block-DPL4). 在此基础上, 进一步将其DPL4的端氨基转化为端肼基, 并通过其与抗肿瘤药物阿霉素(DOX) C＝O的反应形成C＝N键, 实现在DPL4表面的阿霉素药物分子化学结合, 最终得到新型pH敏感性的高分子药物MPEG-block-DPL4-CONHN＝DOX. 运用紫外分光光度(UV-Vis)法, 对MPEG-block-DPL4-CONHNH₂与阿霉素的负载效率进行了定量分析. 高分子药物MPEG-block-DPL4-CONHN＝DOX在生理条件(pH＝7.4)下相对稳定, 而弱酸性条件(pH＝4.5, 5.5)下, C＝N键能较快水解, 释放阿霉素药物分子. 体外细胞毒性评价结果表明(细胞株SMMC-7721和SPCA-1), 所得新型高分子药物MPEG-block-DPL4-CONHN＝DOX的细胞毒性显著地低于游离阿霉素药物分子, 因此, 可进一步研究发展成为新型pH敏感性可控缓释高分子抗肿瘤药物载体体系.     

Shape Memory Properties in Poly(ethylene oxide)–Poly(ethylene terephthalate) Copolymers

Memory effects of several copolymers of poly(ethylene oxide) (PEO) and poly(ethylene terephthalate) (PET) were illustrated with photos, determined with shrinkage experiments and characterized by the recovery of samples to their original figures. Copolymers of appropriate composition could undertake an approximately full recovery which is tightly related to the annealing temperature at which shrinkage of samples occurs to some extent. Melting and recrystallization of PEO segments may be responsible for the memory effect. The memory properties of samples almost kept unchanged after many fatigue cycles (e.g. 15–20 cycles), which could make these copolymers useful in practical applications as novel shape memory materials. © 1997 John Wiley & Sons, Ltd.     

聚乙二醇中1-辛炔的环三聚反应

在绿色反应介质聚乙二醇中,PdCl2／CuCl2催化体系可以顺利地催化1-辛炔发生环三聚反应,区域选择性地生成1,3,5-三己基苯,该反应产率较高,对环境友好,且催化体系可以适当地重复使用．     

聚乙二醇-聚L-丙交酯嵌段共聚物结晶形貌研究

用偏光显微镜和原子力显微镜对比研究了PEG-PLLA嵌段共聚物在110℃或120℃等温结晶后的结晶形貌.发现在110℃时只有PEG5000-PLLA2300和PEG5000-PLLA6300在偏光显微镜下呈现环带球晶形貌,在原子力显微镜高度图中显示明显的环带,并具有交替凸凹起伏形貌.而PEG5000-PLLA12000球晶中没有出现环带形貌而是生成了规则的环线.在120℃时,PEG5000-PLLA12000的球晶中才生成了规则的环带图案,原子力显微镜也显示了其球晶具有明显的交替凸凹起伏形貌,说明过冷度直接影响环带球晶的生成.产生周期性凸凹起伏和明暗交替消光是由片晶沿着球晶的半径方向周期性扭转造成的,片晶在凸起部分是Edge-on取向,在凹下部分是Flat-on取向.