含苯并咪唑基团聚酰亚胺的合成与表征

使用一种含有苯并咪唑基团的二胺单体2-(3-氨基苯基)-5-氨基苯并咪唑与二酐单体进行缩聚反应, 得到一系列聚酰亚胺薄膜, 并对该类薄膜的热性能和机械性能进行表征.结果表明, 该类薄膜具有较高的耐热性和良好的机械性能.同时, 二胺单体中氨基的相对位置赋予分子链以较高的弯曲性, 使该类聚酰亚胺具有较好的热塑性和较高的热膨胀系数.     

苯并咪唑衍生配体锌-铕(或铽)异金属双核配合物的合成、结构与光学性质

合成了四个锌-铕(或铽)异金属双核配合物[ZnLnL¹(NO₃)₃Py] (Ln=Eu (1), Tb (2); HL¹=1-H-2-(2-羟基-3-甲氧基苯基)苯并咪唑; Py=吡啶)和[ZnLnL²(NO₃)₃Py] (Ln=Eu (3), Tb (4); HL²=1-H-2-(2-羟基-3-甲氧基-5-溴苯基)苯并咪唑; Py=吡啶), 其中1、2、3是单晶态, 化合物4则为多晶样品; 通过单晶X射线衍射、元素分析、傅里叶变换红外光谱和电喷雾质谱对化合物进行了表征. 化合物的紫外-可见吸收光谱、荧光激发和发射光谱表明配体的激发态能量有效传递到配合物中的镧系金属离子中, 含有铽(III)离子的配合物发射出其特征发射光谱, 而含有铕(III)离子的配合物由于其它去活方式, 没有辐射出铕(III)离子的特征发射光谱.     

基于吡咯并吡咯二酮和苯并噻二唑聚合物的合成及其近红外电致变色性能

给-受体型窄带隙聚合物是一类新型可见-近红外电致变色材料,虽然可调性强、颜色丰富,但是其电致变色性能如对比度、稳定性等需要进一步提高。 通过调节聚合物中构筑单元吡咯并吡咯二酮(DPP)、苯并噻二唑(BTZ)和噻吩(T)的比例(n(DPP):n(BTZ):n(T)分别为1:0:1、1.5:0.5:1、2:1:1和3:2:1),合成了4种新型窄带隙电致变色聚合物,研究聚合物结构和电致变色性能的关系。 研究发现,这类聚合物在近红外光谱区具有较高的对比度(ΔT:50%60%)和变色效率(CE:300600 cm²/C),尤其是在1550 nm处,聚合物P3的ΔT高达63%、P4的CE高达471 cm²/C。 相比之下,含有BTZ基团的聚合物的吸收更长、对比度更高且更稳定。 这为设计给-受体型高性能电致变色聚合物提供了新的思路。     

苯并咪唑萘酰亚胺类化合物的合成与结构确证

本文合成并分离提纯了1位和4位单取代的苯并咪唑萘酰亚胺(NBI)类化合物1～4,对化合物1的紫外-可见光谱、红外光谱、质谱、核磁共振谱(包括1H NMR、13C NMR、DEPT、1H-13C HSQC、1H-13C HMBC、1H-1HCOSY多种NMR技术)进行了详细解析,对其所有的1H和13C NMR信号进行了归属,并使用了GIAO和CSGT两种方法量化计算核磁位移,通过多种波谱学技术确证了化合物的结构。     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

芳香基苯并咪唑衍生物的合成、表征及抑菌活性研究

在微波辐射下,通过二茂铁磺酰氯和相应的苯并咪唑合成了4种芳香基苯并咪唑衍生物。经^1H NMR、MS及元素分析确证产物结构。通过X线衍射测定了化合物4a的晶体结构。用琼脂稀释法测定化合物抑菌活性,并与对照药剂50%多菌灵可湿性粉剂比较,结果表明化合物4a～4d对番茄早疫病菌、烟草赤星病菌和小麦赤霉病菌有与对照药剂近似的抑菌活性。     

苯并咪唑类缓蚀剂的HQSAR研究及分子设计

采用分子全息定量构效关系(HQSAR)方法, 构建苯并咪唑衍生物在酸性环境中的缓蚀性能与结构之间的定量构效关系模型, 研究不同碎片区分参数及碎片大小对模型质量的影响, 寻找最优HQSAR模型, 并对其稳定性及预测能力进行评价. 结果显示: 选取碎片区分参数为原子类型(A)、化学键类型(B)、连接性(C)、氢原子(H)、手性(Ch)、氢键给体和受体(D&;A), 碎片大小为1-3 建模时, 得到的HQSAR 模型(r²(非交叉验证系数)=0.996, q²(交叉验证系数)=0.960, SE_cv(交叉验证标准误差)=3.709)具有良好的统计学稳定性及预测能力. 根据最优HQSAR模型图设计出的38种苯并咪唑类化合物理论上均具有较好的缓蚀性能. 本研究为油气田新型高效缓蚀剂研发提供可靠的理论依据.     

Microwave-assisted Syntheses and Crystal Structures of Benzimidazole Thiazolinone Derivatives

A rapid and efficient microwave-assisted synthesis method for the preparation of 3-(1H-benzo[d]imidazol-2-yl)-2-substituted phenyl thiazolidin-4-one (4a, 4b) was described. The structures of 4a and 4b were determined by elemental analyses, IR, 1H NMR and X-ray diffraction. In the crystals of compounds 4a and 4b, the imidazole ring and two benzene rings are planar. Interestingly, the dihedral angle between two benzene rings is 71.5° in 4a, while it is almost perpendicular in 4b due to the different benzene substituents. Meanwhile, the thiazolidinone ring is planar in 4a while slightly distorted with an r.m.s deviation of 0.1494(2) in 4b. The hydrogen bonding interactions observed link the molecules to form a dimeric unit, which may be effective in the stabilization of the structure.     

Benzimidazole Derivatives: Synthesis,Physical Properties,and n‐Type Semiconducting Properties

A series of new benzimidazole derivatives were synthesized by the solid‐state condensation and direct sublimation (SSC‐DS) method and their physical properties were investigated. The reaction yields and product stability were significantly affected by the identity of the diamine and anhydride substituents. On the other hand, the substituents of the benzimidazole ring allowed fine tuning of the emission maxima, fluorescence quantum yields, and redox potentials. The HOMO–LUMO levels were estimated by cyclic voltammetry in film on indium tin oxide (ITO) and compared with values obtained by other methods. The described benzimidazoles showed high crystallinity, which is attributed to a high planarity and interactions between carbon and heteroatoms. These compounds showed n‐type semiconducting behavior in organic field‐effect transistors (OFETs). Optimized devices for fluorinated NTCBI (naphthalene tetracarboxylic bisbenzimidazole) showed respectable electron mobilities of ～10^?2 cm² V^?1 s^?1.     

Effect of Bulky Functional Groups on Donor and Acceptor Interactions and their Photoluminescence Properties

Material designs that use donor and acceptor units are often found in organic optoelectronic devices. Molecular level insight into the interactions between donors and acceptors are crucial for understanding how such interactions can modify the optical properties of the organic optoelectronic materials. In this paper, tris(4-(tert-butyl)phenyl)amine (pTPA) was synthesized as a donor in order to compare with unmodified triphenylamine (TPA) in a donor–acceptor system by having 2,4,6-triphenyl-1,3,5-triazine (TRZ) as an acceptor. Dimerization of donors and acceptors occurred in solvent when the concentration of solute is high. At 0 K, using a polarizable continuum model, the nitrogen atom of TPA is found to stack on top of the center of triazine of TRZ, whereas such alignment is offset in pTPA and TRZ. We attributed such alignment in TPA-TRZ as the result of attractive interactions between partial localization of 2p_z electrons at the nitrogen atom of TPA and the π deficiency of triazine in TPA-TRZ. By taking into account random motions of the solvent effect at 300 K in quantum molecular dynamics and classical molecular dynamics simulations to interpret the marked difference in emission spectra between TPA-TRZ and pTPA-TRZ, it was revealed that the attractive interaction between pTPA and TRZ in toluene is weaker than TPA and TRZ. Because of the weaker attractive interaction between pTPA and TRZ in toluene, the dimers adopted numerous ground state conformations resulting in broad emission bands superimposed with multiple small Gaussian peaks. This is in contrast to TPA-TRZ which has only one dominant dimer conformation. This study demonstrates that the strength of intermolecular interactions between donors and acceptors should be taken into consideration in designing supramolecular structures.     

Design,Synthesis, and Thrombin Inhibitory Activity Evaluation of Some Novel Benzimidazole Derivatives

Some benzimidazole derivatives were designed and screened via molecular docking. Six compounds which obtained high scores were selected for synthesis and all compounds were characterized by ¹H‐ and ¹³C‐NMR, and HR‐ESI‐MS. Subsequently, these compounds were evaluated for their inhibitory activities on thrombin. Compound 5a (IC₅₀ 3.11 nm ) showed a better activity than the reference argatroban (IC₅₀ 9.88 nm ). These results, along with related molecular model studies, indicated that 5a could be a potential thrombin inhibitor for further research.     

苯并咪唑类缓蚀剂的3D-QSAR研究及分子设计

采用比较分子场分析法(CoMFA)和比较分子相似性指数分析法(CoMSIA), 对苯并咪唑衍生物抗盐酸腐蚀的缓蚀性能进行了三维定量构效关系研究, 并使用留一法交叉验证手段对3D-QSAR模型的稳定性及预测能力进行了分析. 结果表明, 立体场、静电场和氢键供体场(电子给体)是影响苯并咪唑缓蚀剂缓蚀性能的主要因素; 所构建的CoMFA模型(q2=0.541, R2=0.996)和CoMSIA模型(q2=0.581, R2=0.987)均具有较好的统计学稳定性和预测能力. 基于3D-QSAR等势图设计出了几种具有较好缓蚀性能的苯并咪唑化合物, 为油气田新型缓蚀剂的研发提供了一种新思路.     

Synthesis and Anticoagulant Bioactivity Evaluation of 1, 2, 5-Trisubstituted Benzimidazole Fluorinated Derivatives

Some 1,2,5-trisubstituted benzimidazole fluorinated derivatives were designed and screened by molecular docking. Five compounds which obtained high scores were selected to synthesize. All the target products were char-acterized by ¹H NMR, ¹³C NMR and high resolution mass spectra(HRMS) and preliminarily screened for inhibitory activity against thrombin, among which three compounds(5a, 5c and 5e) were evaluated in vitro. The results showed that compounds 5a, 5c and 5e exhibited better anticoagulant activity than argatroban. Docking simulations demonstrated that these compounds may act as candidates for further studies on thrombin inhibitors.     

Syntheses,electrochemical and spectroelectrochemical characterization of benzothiadiazole and benzoselenadiazole based random copolymers

Three novel donor-acceptor-donor type random copolymers based on benzothiadiazole (BTh) and benzoselenadiazole (BSe) were synthesized via Pd (0) catalyzed Suzuki polycondensation reaction. The two acceptor units were coupled with electron rich moieties which are carbazole (CZ), fluorene (FL) and silafluorene (SiFL). Monomers were characterized using ¹H and ¹³C-NMR spectroscopy. The number and weight average molecular weights of the polymers were calculated using gel permeation chromatography (GPC). All three polymers were electrochemically and spectroelectrochemically characterized. PBThBSeCZ, PBThBSeFL and PBThBSeSiFL showed only p-dopable character and their doping/dedoping potentials were determined as 1.4 V/1.2 V, 1.53 V/1.27 V and 1.8 V/1.3 V, respectively. Corresponding HOMO energy levels were calculated as ?5.85 eV, ?6.05 eV and ?6.15 eV whereas LUMO energy levels were found to be ?3.67 eV, ?3.84 eV and ?3.77 eV, respectively. PBThBSeCZ had lower HOMO level and band gap than PBThBSeFL and PBThBSeSiFL due to its increased electron donating capability of nitrogen atom in carbazole unit.     

Syntheses and Metal-ion Binding Properties of Calix[4]arene Derivatives Containing Soft Donor Atoms: Highly Selective Extraction Reagents for Ag+

A series of calix[4]arene derivatives containing N or S atoms atthe lower rim were synthesized by etherification of OH groups and their metal-ion extraction abilities were studied. The extraction selectivity for Ag⁺ over other ions with these novel receptors was outstanding. Among these ligands, calix[4]arene podand, which possessed two linear ligands, has shown better binding ability with Ag⁺ than calix[4]crowns.     

Synthesis and Optical Properties of Novel Carbazole Derivatives Containing Pyridine Ring

A series of novel monodisperse, well‐defined molecules with a pyridine core and carbazole arms were synthesized by simple procedures with Iodo‐reaction and Ullmann reaction. Their structures were confirmed by IR, ¹H NMR, ¹³C NMR, and elementary analysis. Moreover, the fluorescence spectra showed that these compounds exhibited strong fluorescence with the maximum wavelengths ranging from 373 to 385 nm.     

Synthesis of Benzo[c]thiophene Analogs Containing Benzimidazole,Benzothiazole, and Oxazole

Iodine-mediated cyclization of benzo[c]thiophene aldehyde with 1,2-diphenylamine/2-aminophenylthiol led to the formation of benzimidazole/benzothiazole-incorporated benzo[c]thiophenes. Similarly, reaction of benzo[c]thiophene aldehyde with p-toluenesulfonylmethyl isocyanide (TOSMIC) reagent in the presence of K₂CO₃ as a base furnished oxazole-containing benzo[c]thiophene analogs.     

Synthesis and Luminescence Properties of Three High-dimensional Coordination Polymers:Zn(Ⅱ) with Imidazole or Benzimidazole Ligand

A novel 2D coordination polymer [Zn2(bim)4]n(1)(Hbim=benzimidazole) based on dihydrated-[N,N'-bis(2-aminophenl)-oxalamide](L1·2H2O) with zinc nitrate has been synthesized.Previously we have synthe-sized complexes [In2Zn3(im)12]n(2)(Him= imidazole) and [Zn(im)2]n(3) successfully.In complex 1,each Zn(Ⅱ) coor-dinated with four ligands adopts a distorted tetrahedron coordination mode,and the 2D grid structure is built by the Zn(bim)4 as the secondary building unit(SBU).The luminescence properties of the three c...