Glycidyl methacrylate–tert-butyl acrylate copolymers: Synthesis,characterization, and thermal studies

Glycidyl methacrylate was copolymerized with tert-butyl acrylate in bulk at 60°C using benzoyl peroxide as free radical initiator. The copolymer composition was determined by chemical analysis as well as from ¹³C-NMR data. The monomer reactivity ratios were calculated by using the YBR method. The number average sequence length of the copolymers was determined from ¹³C-NMR data and compared with those obtained from reactivity ratios. The intrinsic viscosity of the copolymers was determined in DMF, and thermal stability as well as mechanism of thermal degradation of the copolymers were evaluated.     

Synthesis, spectral and thermal properties of homo- and copolymers of 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate with styrene and methyl methacrylate and determination of monomer reactivity ratios

The methacrylate monomer, 2-[(5-methylisoxazol-3-yl)amino]-2-oxo-ethyl methacrylate (IAOEMA), was synthesized by reacting 2-chloro-N-(5-methylisoxazol)acetamide dissolved in acetonitrile with sodium methacrylate in the presence of triethylbenzylammoniumchloride (TEBAC). The free-radical-initiated copolymerization of IAOEMA, with styrene (ST) and methyl methacrylate (MMA) was carried out in dimethylsulphoxide (DMSO) solution at 65 °C using 2,2^′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomer (IAOEMA) and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer composition was evaluated by nitrogen content in polymers led to the determination of reactivity ratios. The reactivity ratios of the monomers were determined by the application of Fineman-Ross and Kelen-Tüdös methods. The analysis of reactivity ratios revealed that ST and MMA are more reactive than IAOEMA, and copolymers formed are statisticalle in nature. The molecular weights (M_w and M_n) and polydispersity index of the polymers were determined using gel permeation chromagtography. Glass transition temperatures of the copolymers were found to increase with an increase in the mole fraction of IAOEMA in the copolymers. The apparent thermal decomposition activation energies (E_d) were calculated by Ozawa method using the SETARAM Labsys TGA thermobalance.     

New Methacrylate Copolymers Based on the Benzofurane Ring: Synthesis,Characterization, Monomer Reactivity Ratios and Biological Activity

The free radical copolymerization of (5-bromo-1-Benzofuran-2-yl)(phenyl)-O-methacrylketoxime (BPMKO) with 2-(4-acetylphenoxy)-2-oxoethyl-2-methylacrylate(AOEMA) has been carried out in 1, 4-dioxane at 65°C ± 1 and was analyzed by Fourier transform infrared, ¹H-NMR, ¹³C-NMR and gel permeation chromatography. Elemental analysis was used to determine the molar fractions of BPMKO and AOEMA in the copolymers. The monomer–reactivity ratios were calculated according to the general copolymerization equation using Kelen-Tüdõs and Finemann-Ross linearization methods. The reactivity ratios indicated a tendency toward random copolymerization. The polydispersity indices of the polymers were determined by gel permeation chromatography and suggested a strong tendency for chain termination by disproportionation. The thermal behaviors of copolymers with various compositions were investigated by differential scanning calorimetry and thermogravimetric analysis. The glass-transition temperature of the copolymers increased with increasing BPMKO content in the copolymers. All the products showed moderate activity against different strains of bacteria and fungi.     

Copolymerization of α-Methylstyrene and Styrene

In this paper, the effects of temperature from 60 °C to 80 °C and the molar ratios in monomer feed on the copolymerization of α-methylstyrene(AMS) and styrene(St) were studied. The resulting copolymers, designated as PAS, were characterized by FTIR, GPC, NMR and TGA. When the reaction temperature was below 75 °C, the molecular weights increased almost linearly as the evolution of the copolymerization. The phenomenon revealed that AMS could mediate the conventional free radical polymerization having some features of a controlled system. As the AMS/St = 50/50(molar) in feed, the overall fraction of the AMS unit incorporated into the copolymer was as high as 42 mol%, the monomer conversion could be more than 90 wt% and the molecular weights could reach as high as 4400. However, since the styrene is more reactive than AMS, the AMS fraction in copolymer increased with the overall monomer conversion. The 13C-NMR revealed the products were random copolymers which had triads, such as-AMS-AMS-AMS-,-St-AMS-AMS-(-AMS-AMS-St-) and-St-AMS-St-. TGA curves demonstrated that the degradation temperature of the resulting copolymers went down from about 356.9 °C(0 mol% AMS) to 250.2 °C(42 mol% AMS). This behavior demonstrated that there exist weak bonds in the AMScontaining sequences which could be used as potential free radical generators.     

Novel Copolymers of Styrene. 9. Methyl and Methoxy Ring-Substituted 2-Cyano-3-phenyl 2-propenamides

Novel electrophilic trisubstituted ethylene monomers, methyl and methoxy ring- substituted 2-cyano-3-phenyl-2-propenamides, RPhCH=C(CN)CONH₂, where R is 2,3-dimethyl, 2,4-dimethyl, 2,5-dimethyl, 2-(3-methoxyphenoxy), 2-(4-methoxyphenoxy), 3-(4-methoxyphenoxy), 4-(4-methylphenoxy), 2,3-methylenedioxy were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (5.8–33.8 wt%), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene and Some Halogen Ring-substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH═C(CN)₂ (where R is 2-bromo,3-bromo, 3-chloro, 2,3-dichloro, 2-chloro-6-fluoro, 2,6-difluoro, 3,4-difluoro, and 3,5-difluoro) and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. High T _g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 200–800°C range.     

Novel Copolymers of Styrene. 11. Ring-Substituted 2-Cyano-3-phenyl-2-propenamides

Novel electrophilic trisubstituted ethylene monomers, halo ring-disubstituted 2-cyano-3-phenyl-2-propenamides, RPhCH = C(CN)CONH₂, where R is 2,3-difluoro, 2,4-difluoro, 2,5-difluoro, 2,6-difluoro, 3,4-difluoro, 3,5-difluoro, 2-chloro-4-fluoro, 3-chloro-2-fluoro, 3-chloro-4-fluoro were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (10–14 wt%), which then decomposed in the 500–800°C range.     

Novel Copolymers of Styrene. 10. Halo Ring-Substituted 2-Cyano-3-phenyl-2-propenamides

Novel electrophilic trisubstituted ethylene monomers, halo ring-substituted 2-cyano-3-phenyl-2-propenamides, RPhCH ? C(CN)CONH₂, where R is 2-bromo, 3-bromo, 2-fluoro, 3-fluoro, 2-iodo, 3-iodo, and 4-iodo were prepared and copolymerized with styrene. The monomers were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (7-19 wt%), which then decomposed in the 500–800°C range.     

Benzo-12-crown-4 modified N-heterocyclic carbene for organocatalyst: Synthesis,characterization and degradation of block copolymers of ϵ-caprolactone with L-lactide

A set of poly(L-lactide)-poly(?-caprolactone) diblock copolymers (AB) and poly(L-lactide)-poly(?-caprolactone)-poly(L-lactide) triblock copolymers (ABA) with predictable molecular weights and relatively narrow distributions were synthesized by ring-opening polymerization of successively added ?-caprolactone (?-CL) and L-lactide (LLA) using 4-methyl benzo-12-crown-4 imidazol-2-ylidene as catalyst. The effects of polymerization conditions, such as reaction time, temperature, monomer/catalyst molar ratio and monomer concentration on the copolymerization have been discussed in detail. The resulting copolymers were characterized by ¹H-NMR, ¹³C-NMR, IR, GPC and DSC methods which confirmed the successful synthesis of block copolymers of LLA and ?-CL. Hydrolytic degradation of the polymers showed that the PLLA-PCL-PLLA copolymer exhibited faster degradation as compared with the PCL homopolymer in alkaline medium at 37°C.     

Novel functional copolymers based on glycidyl methacrylate: Synthesis,characterization, and polymerization kinetics

A new methacrylate monomer 2-(4-nitrophenyl)-2-oxoethyl-2-methacrylate (NFM) was synthesized and its radical copolymerization with glycidyl methacrylate (GMA) was studied in 1,4-dioxane solution at 65°C using 2,2′-azobisisobutyronitrile as an initiator. The synthesized monomer and copolymers were characterized by FTIR, ¹H and ¹³C-NMR spectroscopy. The analysis of reactivity ratios revealed that NFM is less reactive than GMA, and copolymers formed are statistically in nature. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increasing in the mole fraction of NFM in the copolymers. Glass transition temperatures of the copolymers decreased with an increasing of NFM molar fraction in copolymers. In addition, according to the results obtained from the contact angle and zeta potential measurements the hydrophobic character of the polymer decreases (it means surface free energy increases) and its zeta potential becomes more negative with increase of NFM ratio in the copolymer. Polymers with carbonyl functional groups have been particularly interesting because of their use as photoresists.     

Further Studies on the Anionic Copolymerization of Styrene and Glycidyl Methacrylate in Toluene

Sequential anionic copolymerization of styrene and glycidyl methacrylate (GMA) was performed with the protection of argon under normal pressure, where styrene, GMA, toluene, THF, n-butyllithium and a small amount of lithium chloride (LiCl) were used as first monomer, second monomer, solvent, polar reagent, initiator and additive, respectively. Polystyrene-b-poly(glycidyl methacrylate) diblock copolymers (PS-b-PGMA) with well-defined structure and narrow molecular weight distribution were prepared by the copolymerization reaction of poly(styryl)lithium with GMA under certain temperatures. The copolymers were characterized using gel permeation chromatography (GPC), ¹H-NMR, ¹³C-NMR, thin layer chromatography (TLC) and hydrochloric acid-dioxane argentimetric methods. The effects of additives, copolymerization temperature and THF dosage on the copolymerization were studied. No chain transfer reaction of anionic polymerization of styrene in toluene was observed. Slightly broader molecular weight distribution of PS-b-PGMA was observed with the increase the GMA repeat units. Using THF/toluene blend solvent could reduce the polydispersity index (M _w /M _n ) and dissolve the copolymer better than toluene alone. Lower temperature (< -40°C) and LiCl are required to prepare PS-b-PGMA with narrower molecular weight distribution.     

Novel Copolymers of Difluoro Ring-substituted 2-Phenyl-1,1-dicyanoethylenes with 4-Fluorostyrene: Synthesis,Structure and Dielectric Study

Copolymerization of fluorine ring-substituted 2-phenyl-1,1-dicyanoethenes, RC₆H₃CH?C(CN)₂ (R is 2,3-F,F, 2,4-F,F, 2,5-F,F, 2,6-F,F, and 4-CF₃) with 4-fluorostyrene were prepared in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the copolymers were characterized by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. The monomer reactivity ratios for 4-fluorostyrene (M₁), r₁ = 0.6 and 2-(2,4-difluorophenyl)-1,1-dicyanoethene (M₂), r₂ = 0 were determined from Fineman-Ross plot. The order of relative reactivity (1/r₁) for difluoro-substituted monomers is 2,4-F,F (0.31) > 2,3-F,F (0.25) > 2,5-F,F (0.22) > 2,6-F,F (0.10). DSC curves showed that the copolymers were amorphous with high T _g in comparison with that poly(4-fluorostyrene) indicating a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer units. From the thermogravimetric analysis, the copolymers began to degrade in the range 214–260°C. The copolymer of 4-fluorostyrene and 2-(2,4-difluorophenyl)-1,1-dicyanoethene and poly(4-fluorostyrene) were dielectrically characterized in the range 25–200°C. The dominating relaxation process detected in both materials was the α-relaxation, associated with the dynamic glass transition. The relationship polarity-permittivity was discussed.     

Acrylonitrile–4-vinylpyridine copolymers effect of comonomer sequence distribution on properties

Acrylonitrile–,4-vinylpyridine copolymers were prepared in chloroform solution at 60°C with AIBN as initiator. Copolymer compositions were determined from their 15.01-MHz ¹³C-NMR spectra. Reactivity ratios of r_AN = 0.093 and r_4VP = 0.32 were calculated by the Kelen and Tudos method. The run number, number-average sequence lengths, and monomer sequence distributions were also calculated. The T_g values of the copolymers, their dye uptake, and degree of alkaline hydrolysis were influenced by the overall copolymer composition but particularly by the monomer sequence distribution in the copolymers.     

Preparation,Characterization and Properties of Cellulose Acetate-Grafted-Poly(glycidyl methacrylate) Copolymers

The cellulose acetate-grafted-poly(glycidyl methacrylate) copolymers were synthesized successfully by free radical polymerization. The resulting copolymer was characterized by proton nuclear magnetic resonance (¹H-NMR), solid-state ¹³C-NMR, Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The crystallization behavior, thermal properties, specific particle surface area, moisture sorption behavior of the modified cellulose acetate were investigated by wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) method and Dynamic Vapor Sorption (DVS) instrument. It was found that the poly(glycidyl methacrylate) (PGMA) grafting was effective in improving the water adsorption of cellulose acetate (CA) changing the specific surface area, and reducing the T_g of copolymers.     

Novel copolymers of styrene. 6. Some oxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates

Novel trisubstituted ethylenes, oxy ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH = C(CN)CO₂C₃H₇ (where R is 4-methoxy-2-methyl, 4-methoxy-3-methyl, 3-ethoxy-4-methoxy, 3,4-dibenzyloxy, 3-benzyloxy-4-methoxy, 4-benzyloxy-3-methoxy) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR, GPC, DSC, and TGA. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3–22% wt.), which then decomposed in the 500–800°C range.     

Calculation of Reactivity Ratios and Sequence Distributions in Copolymers from Monomers 13C-NMR Data

A screening procedure has been developed to predict the average sequence distribution in vinyl copolymers from monomer ¹³C-NMR data. The ¹³C-NMR absorption frequencies of the carbon atoms of the polymerizable double bond are used to calculate the Alfrey-Price Q and e values as previously described by Borchardt and Dalrymple. These, in turn, are used to calculate the monomer reactivity ratios. Reactivity ratios for 54 copolymerizations were calculated by this procedure and compared to literature values. The copolymer sequence distribution may then be determined by means of a computer program written by Harwood. The sequence distribution in copolymers of methacrylic acid and dimethyl-aminoethyl methacrylate, acrylonitrile and methyl methacrylate, 1,1-dichloroethylene and methacrylonitrile, ethyl acrylate and n-butyl methacrylate, and acrylamide and sodium 2-acrylamido-2-methylpropane sulfonate were calculated from reactivity ratios derived from ¹³C-NMR data and compared to literature values. This procedure may be used to calculate the reactivity ratios from ¹³C-NMR spectra of monomers for which no Q and e values are known. By this method the average sequence distribution of such monomers in copolymers may be predicted, significantly reducing the number of copolymers to be synthesized and tested for use in various applications.     

ABC triblock polymethacrylates: Group transfer polymerization synthesis of the ABC,ACB, and BAC topological isomers and solution characterization

ABC triblock copolymers of methyl methacrylate (MMA), (dimethylamino)-ethyl methacrylate (DMAEMA), and tetrahydropyranyl methacrylate (THPMA) consisting of 12 units of each type of monomer were synthesized by group transfer polymerization (GTP). These were the three topological isomers with differentblock sequences: DMAEMA₁₂-THPMA₁₂-MMA₁₂, DMAEMA₁₂-MMA₁₂-THPMA₁₂, and THPMA₁₂-DMAEMA₁₂-MMA₁₂. The molecular weights and molecular weight distributions of the copolymers were determined by gel permeation chromatography (GPC) in tetrahydrofuran, and their number-average degrees of polymerization and copolymer compositions were calculated by proton nuclear magnetic resonance spectroscopy (¹H-NMR). These molecular weights and degrees of polymerization corresponded closely to the values expected from the monomer/initiator ratios. The polydispersities were low as expected for GTP, and ranged from 1.09 to 1.25. The three triblocks were chemically modified by converting the THPMA units to methacrylic acid (MAA) units either by thermolysis or acid hydrolysis. The resulting ABC triblock poly-ampholytes were characterized by ¹H-NMR spectroscopy and hydrogen ion titration. Aqueous GPC studies in 1.0M NaCl at pH 8.5 showed that the triblock copolymers form micelles whose size depends on their block sequence. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 617–631, 1998     

Antimicrobial activity on the copolymers of 2,4‐dichlorophenyl methacrylate with methyl methacrylate: Synthesis and characterization

Copolymers of monomers 2,4‐dichlorophenyl methacrylate (2,4‐DMA) and methyl methacrylate (MMA) were synthesized with different monomer feed ratios using toluene as a solvent and 2,2′‐azobisisobutyronitrile (AIBN) as an initiator at 70 °C. The copolymers were characterized by IR‐spectroscopy, and copolymer composition was determined with UV‐spectroscopy. The linearization method of Fineman–Ross was employed to obtain the monomer reactivity ratios. The molecular weights and polydispersity indexes were determined by gel permeation chromatography (GPC). Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. The homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5227–5234, 2004     

Synthesis and characterization of random hydrophilic/hydrophobic copolymers of styrene and D-lactose-O-vinylbenzylhydroxime

D -Lactose-O-(vinylbenzyl)oxime (LVO), prepared from α-D -lactose and [O-(vinylbenzyl)oxy]amine ( 1 ) was copolymerized with styrene (ST) in dimethylsulfoxide (DMSO)-toluene (1 : 1, v/v) at 65°C using 2,2′-azobisisobutyronitrile (AIBN) as a free radical initiator. The polymerization was rapid when using AIBN as the initiator. The resultant copolymers were characterized by elemental analyses, infrared, viscometry, TGA, DSC, and ¹H-NMR spectroscopy. The poly(ST-co-LVO) had an intrinsic viscosity in the range of 0.11–0.51 dL/g in DMSO at 30°C. The molecular weight was determined by gel permeation chromatography (GPC), and the molecular weight of the resulting polymers ranged from 2.11 × 10⁴ to 6.53 × 10⁷ with low polydispersities. The solubility of the copolymers with different monomer compositions in solvents of varied polarities was also studied. Incorporation of up to 65% (mol %) of lactose-based monomer onto polystyrene backbone led to a water-soluble polymer. Thermal behavior of the synthesized copolymers was evaluated by thermogravimetric analysis (TGA) and correlated very well with the polymer composition. Introduction of a pendant disaccharide compromised the thermal stability of the copolymer. The synthetic approach described in this report provides a route to prepare a novel disaccharide surfactant polymer with well-defined structures and hydrophilic/hydrophobic balances, by adjusting feed ratio of the lactose-based monomer ( 1 ) to styrene. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2971–2978, 1998     

Novel Copolymers of Styrene. 7. Chlorine Ring-Substituted 2-Cyano-3-phenyl-2-propenamides

Novel trisubstituted ethylenes, chlorine ring-substituted 2-cyano-3-phenyl-2-propenamides, RC₆H₃CH?C(CN)CONH₂ (where R is 2,3-dichloro, 2,4-dichloro, 2,6-dichloro, 3,4-dichloro, 2-chloro-5-nitro, 4-chloro-3-nitro, 5-chloro-2-nitro) were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and cyanoacetamide and characterized by CHN elemental analysis, IR, ¹H- and ¹³C-NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution in the presence of a radical initiation (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H- and ¹³C-NMR, GPC, DSC, and TGA. Thus, the order of relative reactivity (1/r1) and the tendency toward alternation of monomer units in the copolymer for the monomers is 2-Cl-5-NO₂ (3.09) > 5-Cl-2-NO₂ (1.88) > 4-Cl-3-NO₂ (0.97) > 2,6-Cl₂ (0.93) > 3,4-Cl₂ (0.31) > 2,4-Cl₂ (0.30) > 2,3-Cl₂ (0.22). High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3.5–5.0 wt%), which then decomposed in the 500–800°C range.