可逆加成-断裂链转移聚合研究进展

对可逆加成．断裂链转移(RAFT)聚合的反应机理、可逆加成．断裂链转移荆的合成方法及其反应动力学的研究进展分别进行了综述。     

基于树形链转移剂的可逆加成断裂链转移聚合

可逆加成断裂链转移(RAFT)聚合是最近十多年来发展起来的一种活性/可控技术,链转移剂(CTA)为该技术的核心.本文介绍了采用R路径合成法、Z路径合成法合成R核与Z核树形链转移剂以及它们调控不同单体的RAFT聚合,合成树形-线性二嵌段共聚物、树形-线性-树形三嵌段共聚物和树形-星形聚合物等树枝状聚合物的研究进展.     

可逆加成-断裂链转移自由基聚合与点击化学相结合在制备特殊结构聚合物中的应用

可逆加成一断裂链转移(RAFT)聚合作为一种新型活性自由基聚合方法,由于其具有单体适用面广、聚合条件温和、不受聚合方法的限制等优点,已经成为聚合物分子设计的有效手段之一.点击化学(Click chaemistry)是近几年发展起来的一种快速合成的新方法,是指选用易得原料,通过可靠、高效而又具有选择性的化学反应来实现碳杂...     

Copolymerization of N-Vinylcarbazole and Vinyl Acetate via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization

Summary: The reversible addition–fragmentation chain transfer (RAFT) random copolymerization of N-vinylcarbazole (NVC) and vinyl acetate (VAc) was carried out using s-benzyl-o-ethyl dithiocarbonate (BED) as the chain transfer agent and 2,2′-azoisobutyronitrile (AIBN) as the initiator in 1,4-dioxane solution at 70 °C. The polymerization showed the characteristics of ‘living’ free radical polymerization behaviors: first order kinetics, linear relationships between molecular weight and conversion, and narrow polydispersity of the polymers. The reactivity ratios of NVC and VAc were calculated via the Kelen–Tudos (KT) and non-linear error in variable (EVM) methods and showed as r₁ = 1.938 ± 0.191, r₂ = 0.116 ± 0.106. The thermal behavior of the copolymers with different content of NVC and VAc was investigated by DSC and TGA. The results showed that the introduction of a VAc segment into copolymer significantly reduced the T_g of the NVC homopolymers. FT-IR spectra, fluorescence spectra, and cyclic voltammetric behavior of these copolymers were also measured and compared with those of NVC homopolymers. The copolymers showed similar oxidative behavior to the NVC homopolymer. However, there was only one reductive potential peak shown for the copolymers at about 0.058 V.     

RAFT聚合法合成甲基丙烯酸酯共聚物及其在负性光致抗蚀剂中的应用

以甲基丙烯酸(MAA)、甲基丙烯酸苄基酯(BZMA)、甲基丙烯酸羟乙酯(HEMA)和丙烯酸正丁酯(BA)为共聚单体,偶氮二异丁腈(AIBN)为引发剂,2-(十二烷基三硫代碳酸酯基)-2-甲基丙酸(DMP)为链转移试剂,采用可逆加成-断裂链转移聚合(RAFT)制备了甲基丙烯酸酯共聚物(PMBBH)。利用傅立叶红外光谱(FT-IR)、核磁共振氢谱(¹HNMR)和凝胶渗透色谱(GPC)对共聚物的结构进行了表征。以共聚物PMBBH为基体树脂制备了负性光致抗蚀剂,考察了PMBBH的分子量对光致抗蚀剂分辨率的影响。结果表明,以数均分子量为5.45×10³ g/mol,重均分子量为7.79×10³ g/mol的PMBBH-2作为基体树脂时,该光致抗蚀剂得到的图像轮廓清晰,图形分辨率可达50 μm。     

Preparation of a Pyrazosulfuron-Ethyl Imprinted Polymer with Hydrophilic External Layers by Reversible Addition-Fragmentation Chain Transfer Precipitation and Grafting Polymerization

A new imprinted polymer with both functions of molecular recognition and macromolecule exclusion was synthesized for selective extraction of pyrazosulfuron-ethyl and removal of humic acids in environmental analysis. In the preparation, spherical pyrazosulfuron-ethyl imprinted polymers were synthesized by reversible addition–fragmentation chain transfer (RAFT) precipitation polymerization. The hydrophilic polymer layers were then grafted on the surface of the imprinted polymer microspheres using post-RAFT polymerization. The conditions that influence the selectivity, size, and uniformity of the imprinted microspheres were studied systematically. The computer simulation was employed to study the template-monomer interaction. The solubility parameters of poly(MAA-co-EDMA) and porogen were calculated to investigate the relationship between the particle size and the solubility parameter. The results indicated that the pyrazosulfuron-ethyl imprinted polymers have special affinity for the template and several structurally related sulfonylurea herbicides. The molecularly imprinted polymer (MIP) with external hydrophilic chains not only had function of template retention, but also better function of protein/humic acid exclusion. This research demonstrates that multifunctional imprinted material with a narrow size distribution can be prepared by the RAFT polymerization.     

Reversible Addition‐fragmentation Chain Transfer Polymerization Grafted from Silicon Surface to Prepare Poly(methyl methacrylate) Brushes

通过共价键锚固链转移剂4-氰基-4-二硫代苯甲酰基戊酸琥珀酯于硅片表面,然后采用可逆加成-断裂链转移（RAFT）自由基聚合方法制备了聚甲基丙烯酸甲酯（PMMA）高分子刷. 聚合动力学研究表明,在反应进行2小时后,PMMA的厚度随聚合时间的增大而几乎呈线性增大,具有明显的活性聚合特征. 用椭圆偏光仪、X-光电子能谱（XPS）、原子力显微镜（AFM）及接触角测试对硅片表面的PMMA高分子刷进行了表征.     

Reversible Addition Fragmentation Chain Transfer Polymerization of Isobutyl Methacrylate

Abstract

The reversible addition fragmentation chain transfer (RAFT) bulk polymerization of isobutyl methacrylate (i‐BMA) has been studied using 2‐cyanoprop‐2‐yl dithionaphthalate (CPDN) as RAFT agent in the presence of 2,2′‐azobisisobutyronitrile (AIBN). The results of polymerizations of i‐BMA show that i‐BMA can polymerize in a controlled way by RAFT polymerization using CPDN as RAFT agent; i.e., the polymerization rate is first order with respect to monomer concentration, molecular weight increases linearly with monomer conversion, and polydispersities are relatively low (PDI?<?1.2). The structure of the polymer was characterized by ¹H‐NMR. A chain‐extension experiment of the resulting polymer was successfully carried out. The influences of [i‐BMA]₀/[CPDN]₀/[AIBN]₀ molar ratio and reaction temperature were investigated.     

Atom Transfer Radical Polymerization of Methyl Methacrylate Using Telechelic Tribromo Terminated Polyurethane Macroinitiator

Novel telechelic tribromo terminated polyurethane (Br₃-PU-Br₃) was used as a macroinitiator in atom transfer radical polymerization (ATRP) of methyl methacrylate using CuBr as a catalyst and NN,N',N”,N”-pentamethyldiethylenetriamine (PMDETA) as a ligand. During the course of polymerization, poly(methyl methacrylate)-b-polyurethane-b-poly(methyl methacrylate) (PMMA-b-PU-b-PMMA) tri-block copolymers were formed. The resulting tri-block copolymers were characterized by gel permeation chromatography (GPC) and ¹H nuclear magnetic resonance (NMR) spectroscopy. Molecular weight of the tri-block copolymers increases with increasing conversion. This result shows Br₃-PU-Br₃/CuBr/PMDETA initiating system polymerized methyl methacrylate through ATRP mechanism. NMR spectroscopy results revealed that apart from bromine atom transfer from Br₃-PU-Br₃ to PMDETA-CuBr complex, bromine atom transfer from the initially formed tri-block copolymer to PMDETA-CuBr complex also takes place, and, as a result, double bond terminated copolymer formed. Mole ratio of polyurethane and poly(methyl methacrylate) present in the PMMA-b-PU-b-PMMA tri-block copolymers was calculated using ¹H-NMR spectroscopy and it was found to be comparable with the mole ratio calculated through GPC results. Differential scanning calorimetric results confirmed the presence of two different phases in the tri-block copolymers.     

Molecular Recognition Ability of Molecularly Imprinted Polymer Nano- and Micro-Particles by Reversible Addition-Fragmentation Chain Transfer Polymerization

The role of molecularly imprinted polymers (MIPs) is changing from academic to applied researches. Challenging problems about MIP will be more highlighted in applicable uses and solving these problems is vital. The controlled/“living” radical polymerization (CLRP) techniques are applicable to solve the challenging problems in MIPs. The “living” nature of CLRP helps to improve the heterogeneity of binding sites in MIPs as a main challenge where precise control over sizes, compositions, and surface functionalities is achieved. Among different techniques of CLRP, reversible addition-fragmentation chain transfer (RAFT) technique presents distinguished benefits such as compatibility and tolerance to a wide range of functional monomers and mild reaction conditions rather than other CLRP techniques. In this review, in order to obtain more insights into the potential benefits of RAFT polymerization in fabrication of nano and micro MIP networks, recent research in advanced MIP materials for different templates with improved morphology, efficiency, and binding capacities with respect to traditional free radical polymerization (FRP) will be discussed. MIPs prepared via RAFT method have advantages of MIPs as high performance molecular recognition devices and CLRP as controllable polymerization mechanism, simultaneously.     

Effect of Microwave Activation on Polymerization Rate and Molecular Weight Development in Emulsion Polymerization of Methyl Methacrylate

Polymerization rate and molecular weight development experimental results for the emulsion polymerization of methyl methacrylate (MMA), in the presence of potassium persulphate (PPS) as initiator, and activated with a 50 W microwave source, are reported. The polymerization kinetics of the microwave activation experiment (MA) was compared against a traditional conductive heating (CH) polymerization reaction. The number average molecular weights, M_n, of the polymer samples obtained with microwave activation were significantly higher than those obtained from conductive heating. These high values of M_n were obtained from the beginning of the polymerization reaction. Polydispersity index (PDI) values in the range of 1.18 to 1.83 were obtained in the microwave irradiated samples. These values are lower than those produced by conventional emulsion polymerization of styrene and other vinyl monomers, and resemble the PDI values obtained in controlled‐radical polymerization processes. Polymer particles of submicron size (60 to 100 nm) were obtained.     

Heterogeneity Features of Bulk Atom Transfer Radical Polymerization of Methyl Methacrylate in an Ampoule Reactor

Summary: This work demonstrated the severity of heterogeneity issues with ampoule reactors in bulk atom transfer radical polymerization of methyl methacrylate. The kinetic data of Cu^II concentration, monomer conversion, and polymer molecular weight varied from location to location along the ampoule. However, the polymer molecular weight versus conversion data from different locations fell into a single theoretical line. All locations except for the bottom part of the ampoule produced polymers having narrow molecular weight distribution.

Conversion versus time at different locations for the ATRP of MMA at 70 °C.     

Atom Transfer Radical Polymerization of Methyl Methacrylate High Efficiently Initiated by Azo-containing Iniferter

Two novel azo-containing iniferters, (4,4′-(diazene-1,2-diyl) bis(4,1-phenylene) bis(2-(diethylca-rbamothioylthio)-2-methylpropanoate (BDCMP) and 4-((4-bromophenyl)diazenyl)phenyl-2-(diethylcarbamothioylthio)-2-methylpropanoate (PDCMP) were synthesized and used successfully as the initiators for atom transfer radical polymerization of methyl methacrylate (MMA). The kinetic plots were first order and the molecular weights of the polymers with narrow molecular weight distributions increased with the monomer conversions. Furthermore, the results showed that the apparent initiation efficiencies (f was close to 0.90 defined as M _n(th)/M _n(GPC)) of BDCMP and PDCMP were both higher than that (f was lower than 0.5) of 2-N,N-(diethylamino)dithiocarboyl-isobutyrate (EDCIB), which was reported previously by us (14 Zhang, W., Zhu, X. L., Cheng, Z. P. and Zhu, J. 2007. J. Appl. Polym. Sci., 106: 230–7. [Crossref] , [Google Scholar]). The obtained mono- and bi-functional PMMAs containing azo and N,N-diethyldithiocarbamate (DC) groups were confirmed by ¹H-NMR and ultraviolet absorption spectra, respectively. The block copolymer, poly (methyl methacrylate)-b-polystyrene (PMMA-b-PS), was also successfully prepared via the ATRP chain-extension experiment using the obtained PMMA as a macroinitiator.     

苯甲酸乙烯酯与受电子的可逆加成－断链链转移共聚合

采用二硫代苯甲酸苄酯和偶氮二异丁腈组成的引发体系,以可逆加成－断链链 转移聚合方法合成了苯甲酸乙烯酯与马来酸酐及N－取代马来酰亚胺的交替共聚物 。结果表明,所行聚合物具有预期分子量,分子量分布在1.1～1.3之间。在较低转 化率下所得的聚合物均为交替结构,而与摩尔设料比无关。     

Controlled Radical Polymerization of 2,3‐Epithiopropyl Methacrylate

We report first results on the controlled radical polymerization of 2,3‐epithiopropyl methacrylate (ETMA) also known as thiiran‐2‐ylmethyl methacrylate. Reversible addition‐fragmentation chain transfer (RAFT) of ETMA was carried out in bulk and in solution, using AIBN as initiator and the chain transfer agents: cyanopropyl dithiobenzoate (CPDB) and cumyl dithiobenzoate (CDB). A linear increase of the number‐average molecular weight and decrease of the polydispersity with monomer conversion were observed using CPDB as transfer agent, indicating a controlled process. Atom transfer radical polymerization (ATRP) of ETMA was performed under different reaction conditions using copper bromide complexed by tertiary amine ligands and ethyl 2‐bromoisobutyrate (EBiB) or 2‐bromopropionitrile (BPN) as initiator. All experiments lead to a crosslinked polymer. Preliminary studies in the absence of initiator showed that the CuBr/ligand complex alone initiates the ring‐opening polymerization of thiirane leading to a poly(propylene sulfide) with pendant methacrylate groups.

     

Continuous Reversible Addition‐Fragmentation Chain Transfer Polymerization in Miniemulsion Utilizing a Multi‐Tube Reaction System

Summary: A unique, multi‐tube, continuous reactor has been successfully designed and implemented for the study of reversible addition‐fragmentation chain transfer (RAFT) in miniemulsions. Data collection is greatly enhanced by the ability to simultaneously collect samples at five different residence times. The results of a styrene homopolymerization show that kinetically, the reactor exhibits similar behavior to a batch reaction. Number‐average molecular weights increased linearly with conversion, typical of living polymerizations.

The number‐average molecular weight of the polymers produced in the tubular reactor increased linearly with conversion, indicative of a controlled polymerization.     

Synthesis of Poly(methyl methacrylate) Nanosize Particles by Differential Microemulsion Polymerization

Poly(methyl methacrylate) nanosize particles were synthesized by a differential microemulsion polymerization process. Sodium dodecylsulfate and ammonium persulfate were used as the surfactant and initiator, respectively. The effects of reaction conditions on the particle size have been investigated. A particle size of less than 20 nm in diameter has been achieved with surfactant/monomer and surfactant/water weight ratios of 1:18 and 1:120, i.e. much milder conditions than those previously reported in the literature.

TEM image of nanoparticles prepared via differential microemulsion polymerization.     

室温下甲基丙烯酸甲酯原子转移自由基乳液聚合反应研究

以卤化亚铜（CuX）/1,10-邻二氮菲（phen）配合物为催化剂、2-溴代异丁酸 乙酯（EBiB）为引发剂、十二烷基磺酸钠（SLS）为乳化剂,进行了甲基丙烯酸甲 酯（MMA）的原子转移自由基乳液聚合（ATRP）反应。结果表明,与较高温度（70 - 90 ℃）下的聚合反应相比,室温（25 ℃）时聚合反应有更好的可控性,通过 外加钝化剂的复合催化引发体系CuBr/CuBr_2/phen/EBiB或利用CuCl/phen/EBiB催 化引发体系的“卤素交换反应”,可进一步改善聚合反应的可控性。紫外发光谱测 定结果表明,CuBr/phen配合物在MMA相中的分配倾向随着温度的降低而增大,使得 室温下MMA的乳液ATRP保持了较好的可控性和较快的反应速度。     

RAFT Mediated Polymerization of Methyl Methacrylate Initiated by Bergman Cyclization: Access to High Molecular Weight Narrow Polydispersity Polymers

The first RAFT mediated polymerization of methyl methacrylate initiated by diradicals derived from Bergman cyclization was performed employing 3,4‐benzocyclodec‐3‐ene‐1,5‐diyne (BCDY) as diradical source and cyanoisopropyldithiobenzoate (CPDB) as RAFT agent. The polymerization was conducted in bulk at 80 °C for 3 h. The concentration of the enediyne was kept constant at 3.0 × 10⁻² mol · L⁻¹ and the RAFT agent concentration was varied between 0.0 mol · L⁻¹ and 2.4 × 10⁻¹ mol · L⁻¹. A detailed ESI‐MS analysis reveals the absence of intramolecular termination reactions (ring formation) in the RAFT mediated system, which usually makes diradicalic initiation unfavorable. The presence of polymeric chains propagating at both ends could be confirmed. The conversion of the RAFT mediated polymerization was up to more than two times higher than the RAFT free polymerization at identical conditions. Thus, polymers with narrow polydispersities (1.1 ≤ PDI ≤ 1.5) even at very high molecular weights (near 400 000 Da) were obtained within modest reaction times.

     

Kinetic Analysis of Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerizations: Conditions for Inhibition,Retardation, and Optimum Living Polymerization

Careful simulations of conversion vs. time plots and full molecular weight distributions have been performed using the PREDICI® program package in conjunction with the kinetic scheme suggested by the CSIRO group for the reversible addition fragmentation chain transfer (RAFT) process to probe RAFT agent mediated polymerizations. In particular, conditions leading to inhibition and rate retardation have been examined to act as a guide to optimum living polymerization behavior. It is demonstrated that an inhibition period of considerable length is induced by either slow fragmentation of the intermediate RAFT radicals appearing in the pre‐equilibrium or by slow re‐initiation of the leaving group radical of the initial RAFT agent. The absolute values of the rate coefficients governing the core equilibrium of the RAFT process – at a fixed value of the equilibrium constant – are confirmed to be crucial in controlling the polydispersity of the resulting molecular weight distributions: A higher interchange frequency effects narrower distributions. It is further demonstrated that the size of the rate coefficient controlling the addition reaction of propagating radicals to polyRAFT agent, k_β, is mainly responsible for optimizing the control of the polymerization. The fragmentation rate coefficient, k_–β, of the macroRAFT intermediate radical, on the other hand, may be varied over orders of magnitude without affecting the amount of control exerted over the polymerization. On the basis of the basic RAFT mechanism, its value mainly governs the extent of rate retardation in RAFT polymerizations.