Thermodynamic Investigation of the Azeotropic Mixture Composed of Water and Benzene

The molar heat capacity of the azeotropic mixture composed of water and benzene was measured by an adiabatic calorimeter in the temperature range from 80 to 320 K. The phase transitions took place in the temperature range from 265.409 to 275.165 K and 275.165 to 279.399 K. The phase transition temperatures were determined to be 272.945 and 278.339 K, which were corresponding to the solid-liquid phase transitions of water and benzene, respectively. The thermodynamic functions and the excess thermodynamic functions of the mixture relative to standard temperature 298.15 K were derived from the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Behavior of a Metastable Gel of Sodium N‐Stearoyl‐l‐Glutamate/Water System

Gel formation was observed at 25°C in a mono sodium N‐stearoylglutamate (C18GS)/water system by quick cooling (quenching, 15°C/minute), whereas coagel was formed by slow cooling (annealing, 1°C/minute). Two kinds of phase transition temperatures, T_gel (coagel‐gel) and T_c (gel‐liquid crystal or micelle), were detected in the annealing system using a differential scanning calorimeter (DSC). On the other hand, only T_c was observed in the quenching system. Since the phase transition entropies at T_c in both the quenching and annealing systems are similar, both gels are considered to be in the same structure, and the gel observed in the quenching system at low temperature is in the metastable, supercooled state. Judging from the ¹H‐NMR data and microscopic observation, a homogenous gel is formed above 7 wt% of C18GS. With an increase in surfactant concentration, the thixotropic tendency of the gel increases due to the decrease in free‐water. Since it was difficult to show gel formation with the shorter chain homologs, C14GS and C12GS, the hydrocarbon chain length of the surfactant appears to be very important in the formation of a metastable, supercooled gel.     

Effect of Dissolved CO_2 and Tetrahydrofuran on the Polymerization of Acrylic Acid

Recently,c0mpressedgaseshavebeenusedins0megasantisolventprocesses,suchasfractionati0n0fnaturaIproducts,recrystallization0forganicandin0rganicmaterials,andpolymerpr0cessing'2.WestudiedtheeffectofthedissovledsupercriticaICO=andTHFonthep0lymerizati0n0fAA.Itwasn0tfoundintheliterature.ExperimentalOnemlacrylicacidmonomer,O.O20ginitiator2,2'-azobis(is0butyronitrile)(AlBN),anddesiredam0unt0fTHFwereaddedintoanopticalcelloflOml.CO,wascharged,stirreduntilvap0r-liquidequilibriumwasreachedatabout30…     

Synthesis and Amphiphilic Behavior of N,N‐Bis‐glucosyl‐1,5‐benzodiazepin‐2,4‐dione

Abstract

Glucosyl‐1,5‐benzodiazepin‐2,4‐diones were synthesized in order to study the influence of the glucidic moiety on the amphiphilic behaviour. The glucosyl groups include 6‐deoxy‐D‐glucopyranos‐6‐yl and 6‐deoxy‐3‐O‐R‐D‐glucopyranos‐6‐yl (R = n ? C _n H _2n+1; n = 1, 8, 10 and 12). Variation in the length of the hydrocarbon chain allowed comparison of such amphiphilic data as water solubility (Sw) and surface tension (γ) values. At 25°C, the glucopyranosyl benzodiazepines with R = H and CH₃ show a higher water solubility than the starting 1,5‐benzodiazepin‐2,4‐diones. Some other glucidic benzodiazepine derivatives with an appropriate alkyl chain at C‐3 carbon of the D‐glucopyranose present a variable hydrosolubility and surface tension γ values close to 43 to 46 mN · m^?1 at the corresponding saturation. Moreover, according to preliminary tests, these compounds seem to show a better affinity for the blood brain barrier.     

Novel Copolymers of Vinyl Acetate and Some Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, some ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 3‐C₆H₅O, 4‐C₆H₅O, 3‐C₆H₅CH₂O, 4‐C₆H₅CH₂O, 4‐CH₃CO₂, 4‐CH₃CONH, 4‐(C₂H₅)₂N) were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T _g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–700°C range.     

Novel Copolymers of Vinyl Acetate and Halogen Ring‐Disubstituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, halogen ring‐disubstituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₃CH?C(CN)₂ (where R is 2,3‐diCl, 2,4‐diCl, 2,6‐diCl, 3,4‐diCl, 3,5‐diCl, 2,4‐diF, 2,5‐diF, 2,6‐diF, 3,4‐diF, 3,5‐diF, 2‐Cl, 6‐F) were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T_g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 220–800°C range.     

Acid‐Promoted Thioacetalization in Water using 2‐(1,3‐Dithian‐2‐ylidene)malonic Acid as an Odorless and Efficient Thioacetalization Reagent

Thioacetalization using 2‐(1,3‐dithian‐2‐ylidene)malonic acid 1 as a nonthiolic, odorless 1,3‐propanedithiol equivalent promoted by p‐dodecylbenzenesulfonic acid in water has been achieved. A range of selected carbonyl compounds 2 was converted into the corresponding dithioacetals 3 in high yields. Moreover, the thioacetalization showed high chemoselectivity between aldehydes and ketones.     

Molecular Dimension and Interaction Parameters of Polyacrylamide in Water‐N,N‐Dimethylformamide Mixtures

The intrinsic viscosities [η] of polyacrylamide (PAM) having different average molecular weights are measured in various mixtures of water (good solvent) and N, N dimethyl formamide (DMF, nonsolvent) at different temperatures. The observed results show a significant variation of cosolvency as a function of solvent composition (?_DMF). The nature of curves in [η] vs. ?_DMF plot at different temperatures indicates the existence of two antagonistic effects. The unperturbed dimensions (K_θ) of the polymer are determined by a number of methods, which agree well with each other. The temperature coefficient of unperturbed dimension (K′), molecular extension factors (α_n), characteristic ratio (C_α) and chain rigidity (σ) are evaluated and the effects of temperature, solvent composition are discussed. The volume related parameter V_E and shape factor ν were also computed, which shows the shape of polymer molecules to be more or less spherical in solution.     

Novel Copolymers of Vinyl Acetate and Alkyl Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, alkyl ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 2‐methyl, 3‐methyl,4‐methyl, 4‐ethyl, 4‐isopropyl, 4‐butyl, and 4‐t‐butyl), were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T_g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–700°C range.     

Novel Copolymers of Vinyl Acetate and Some Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, some ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 3‐Br, 4‐CH₃O; 5‐Br, 2‐CH₃O; 4‐Cl, 3‐NO₂; 5‐Cl, 2‐NO₂; 2‐CN, 3‐CN, 4‐CN, and 4‐(CH₃)₂N), were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T _g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–800°C range.     

Novel Copolymers of Vinyl Acetate and Ring‐Substituted Methyl 2‐cyano‐3‐phenyl‐2‐propenoates

Equimolar alternating copolymers of vinyl acetate and electrophilic trisubstituted ethylene monomers, ring‐substituted methyl (E)‐2‐cyano‐3‐phenyl‐2‐propenoates, RC₆H₄CH?C(CN)CO₂CH₃ (where R=4‐acetamido, 2‐cyano, 3‐cyano, 4‐cyano, 4‐diethylamino) were prepared via copolymerization in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H‐ and ¹³C‐NMR. High glass transition temperatures of the copolymers in comparison with that of polyvinyl acetate indicate a decrease in chain mobility of the copolymers due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the decomposition of the copolymers occurs in two steps. The first step is relatively fast weight loss in 257–370°C range followed by very slow decomposition of the formed residue in 370–950°C range.     

Facile and Efficient Deoxygenation of Amine‐N‐oxides with Gallium in Water

Abstract

A facile and efficient procedure for the deoxygenation of amine‐N‐oxides with gallium metal in water is described. The experimental procedure is quite simple and the products are obtained in high yields without any activating agent.     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

Novel Copolymers of Vinyl Acetate with Alkyl and Alkoxy Ring‐Disubstituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, alkyl and alkoxy ring‐disubstituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₃CH?C(CN)₂ (where R is 2,4‐(CH₃)₂, 2,5‐(CH₃)₂, 2,3‐(CH₃O)₂, 2,4‐(CH₃O)₂, 2,5‐(CH₃O)₂, 3,4‐(CH₃O)₂, 3‐C₂H₅O‐4‐CH₃O, 4‐CH₃O‐3‐CH₃), were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐disubstituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and vinyl acetate were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C‐NMR, GPC, DSC, and TGA. High T _g of the copolymers, in comparison with that of polyvinyl acetate, indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 190–700°C range.     

Preparation and Characterization of Homo‐ and Co‐Polymers of Some Vinyl Monomers via ATRP by Using Imine Macrocycle as Ligand

Imine macrocyclic ligand M₁ was involved in homo‐ and co‐polymerization of some vinyl monomers via atom transfer radical polymerization technique (ATRP). Hereby, vinyl acetate, styrene and methyl acrylate monomers were homopolymerized. On the other hand, they were involved in copolymerization with MMA. M₁∶CuBr∶initiator∶monomer percentages were 1∶2∶4∶400. ¹HNMR confirmed the structures of the resulting polymers. The thermal behaviors of some selected polymers were studied.     

Practical and General Entry to N‐Tosyl Aryl Aldimines Promoted by Sulfamic Acid in Water and Alcohol

A practical, indirect procedure composed of a three‐component condensation using aromatic aldehydes, p‐tosylamide, and sodium p‐toluenesulfinate in the presence of sulfamic acid in tap water–alcohol solvents to afford amidosulfones, and the subsequent water two‐phase basic elimination of the amidosulfones to N‐tosyl arylimines, was developed. The process has little environmental impact, easy workup, mild reaction conditions, and good yields and is amenable to large‐scale preparations.     

Novel Copolymers of N‐(4‐Bromophenyl)‐2‐Methacrylamide with 2‐Acrylamido‐2‐Methyl‐1‐Propanesulfonic Acid

The new acrylamide monomer, N‐(4‐Bromophenyl)‐2‐methacrylamide (BrPMAAm) has been synthesized by reacting 4‐Bromoaniline with methacryloyl chloride in the presence of triethylamine(NR₃) at 0–5°C. The radical‐initiated copolymerization of (BrPMAAm), with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) has been carried out in dimethylformamide (DMF) solution at 70±1°C using 2,2′‐azobisisobutyronitrile (AIBN) as an initiator with different monomer‐to‐monomer ratios in the feed. The copolymers were characterized by FTIR, ¹H‐ and ¹³C‐NMR spectroscopy. The copolymer composition was evaluated by nitrogen content (N for AMPS‐units) in polymers led to the determination of reactivity ratios. The monomer reactivity ratios for BrPMAAm (M₁)‐AMPS (M₂) pair were computed using the Fineman‐Ross (F‐R), Kelen‐Tüdös (KT) and Extended Kelen‐Tüdös (EKT) methods. These parameters were also estimated using a non‐linear computational fitting procedure, known as reactivity ratios error in variable model (RREVM). The mean sequence lengths determination indicated that the copolymer was statistically in nature. By TGA and DSC analyses, the thermal properties of the polymers have been studied. The antimicrobial effects of polymers were also tested on various bacteria, and yeast.     

Ce(SO4)2‐Mediated Nitration of N,N‐Dialkylanilines with NaNO2 in Water

Ce(SO₄)₂‐mediated nitration of N,N‐dialkylanilines with NaNO₂ using water as the solvent has been achieved in good to excellent yields. The nitrating reaction proceeded smoothly at ambient temperature.     

Efficient Synthesis of 2‐(N‐Substituted)‐2‐imidazolines and 2‐(N‐Substituted)‐1,4,5,6‐tetrahydropyrimidines

A general method for the preparation of 2‐(N‐Substituted)‐2‐imidazolines and 2‐(N‐Substituted)‐1,4,5,6‐tetrahydropyrimidines is described. These heterocycles can be synthesized from their respective anilines with 2‐chloro‐2‐imidazoline or 2‐chloro‐1,4,5,6‐tetrahydropyrimidine, generated in situ from imidazolidin‐2‐one and tetrahydropyrimidin‐2(1H)‐one activated by dimethyl chlorophosphate, in good to excellent yields.