Synthesis and Properties of pH-Responsive Polymers with Cadaverine Side Groups

A water-soluble monomer N¹-(4-vinylbenzyl)-pentane-1,5-diamine dihydrochloride (VBPDA) with cadaverine (1,5-pentanediamine) group was synthesized. pH-responsive polymer with cadaverine group was obtained by free radical polymerization of VBPDA using 4,4-azobis(4-cyanovaleric acid) (ACVA) as the initiator. The structure and molecular weight of the polymer were characterized by FTIR, ¹H-NMR and GPC-MALLS. Aggregation behavior of the polymer in aqueous solution was investigated by dynamic light scattering (DLS), UV-Vis and fluorescence measurements. The experimental results show that the fluorescence intensity of the aggregates decreases and the size of the aggregates increases with increasing pH due to the continuous dehydration of the cadaverine side groups.     

Membrane structure control of BTDA-TDI/MDI (P84) co-polyimide asymmetric membranes by wet-phase inversion process

The formation process and morphology of BTDA-TDI/MDI co-polyimide (P84, CAS#: 58698-66-1) asymmetric flat sheet membranes have been studied. Experimental results indicated that the weight ratio of H₂O and N-methyl-2-pyrrolidone (NMP, CAS#: 872-50-4) at cloud point curve (above critical point) was a constant (7.66/92.34 (w/w)) for the P84/NMP/H₂O system. For two different casting solutions (21 wt.% P84 in pure NMP; 15 wt.% P84 in H₂O/NMP: 6.0/94.0 (w/w)), the approaching ratio α strongly dominated the formation of finger-like structure rather than the viscosity of casting solution. The formation of finger-like structure in P84 co-polyimide asymmetric membranes was due to the hydrodynamically unstable viscous fingering developed when the casting solution was displaced by a polymer-lean phase. Three types of membrane morphologies, finger-like structure, transition structure and sponge-like structure can be expected with various approaching ratio α of casting solutions. The critical approaching ratio α^* was initially defined to describe the sharp change of membrane morphology from finger-like to sponge-like structure. The casting temperature also influenced the membrane morphology. For some casting solutions (e.g. 15 wt.% P84 in H₂O/NMP: 6.4/93.6 (w/w)), the membrane morphology changed from sponge-like to finger-like structure with an increase in casting temperature. Meanwhile, the critical approaching ratio α^* also increased with an increase in casting temperature.     

Aggregation behavior of organic‐soluble semi‐aromatic polyimides in N‐methylpyrrolidone systems

Aggregation behavior of the organic‐soluble semi‐aromatic polyimides, whose degrees of imidization range from 69 to 96%, obtained using 4,4′‐oxydianiline, 4,4′‐diamino‐3,3′dihydroxybiphenyl, and bicyclo[2.2.2]‐oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride (BCDA) in N‐methylpyrrolidone (NMP), NMP/cyclohexanone, and NMP/γ‐butyrolactone (BCDA‐based polyimides) were studied by static light scattering (SLS) and dynamic light scattering (DLS). The DLS analyses for the multirelaxation modes demonstrated the specific character unlike flexible polymers that the single BCDA‐based polyimide chains first associate with each other to form small clusters in the dilute region, and then expand to large aggregates by the entanglements between the small clusters with an increasing concentration into the semi‐dilute region. Given the semi‐aromatic structure of BCDA‐based polyimides weakening the charge transfer (CT) interaction between the diamine and the dianhydride unit, it is concluded that the unique aggregation behavior of BCDA‐based polyimides is dominated by the balance between the driving force for the “organic solubility” given by both the increase in bulkiness and the decrease in the CT interaction, and that for the “organic insolubility” derived from both the hydrogen‐bonded interaction of the phenolic hydroxyl groups and the π–π interaction of the phenyl rings. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Solution properties of poly(amic acid)–NMP containing LiCl and their effects on membrane morphologies

Physical properties of poly(amic acid) (PAA) casting solutions in N-methyl-2-pyrrolidone (NMP) containing lithium chloride (LiCl) were characterized by viscometry and dynamic light scattering (DLS) and were related to the morphological properties of asymmetric membranes prepared from these solutions. At a fixed polymer concentration, the increase in viscosity of the PAA solutions with increasing LiCl content is mainly determined by the viscosity of the salt–solvent medium, implying that the LiCl–NMP interactions are stronger than those between LiCl and PAA. Because of the strong salt–solvent interactions, complexes between LiCl and NMP are formed. The complexes reduce the solvent power of NMP for PAA inducing polymer aggregation (clustering) and/or transient cross-links in the solutions. Dynamic light scattering results for salt-containing solutions at low PAA concentrations support the existence of these aggregations. Solutions without salt showed a single relaxation, but solutions with LiCl exhibit multiple relaxation modes; two diffusional modes of cooperative and aggregates, and one angle independent transient network mode. The polymer aggregates and transient cross-links form a gel-like structure in the casting solution film and hinder macrovoid formation during phase inversion, resulting in asymmetric membranes with a primarily sponge-like structure.     

Photoluminescence and Raman spectroscopy studies on polyaniline/PbI2 composite

Functionalization of PbI₂ with conjugated polymers (polyaniline-emeraldine base (PANI-EB) or polyaniline-emeraldine salt (PANI-ES)) is demonstrated by Raman and luminescence studies. PbI₂/PANI hybrid material was prepared by electrochemical polymerization of aniline onto the PbI₂ modified Pt electrode and mechanico-chemical reaction between the two constituents. PANI interacting with the PbI₂ gives rise to new Raman bands at 80, 144 and 170 cm⁻¹. First line reveals the formation of “stacking faults” that disrupt the I-Pb-I layers stacking along the c axis by the insertion of polymer molecules. The bands at 144 and 170 cm⁻¹ are attributed to the vibrational mode associated with Pb-NHR″₂ (R″=C₆H₄) bond. The functionalization of PbI₂ with PANI-EB brings forth the PANI-ES form. Depending on the semiconducting (PANI-EB) or conducting (PANI-ES) properties of the polymer in the PbI₂/PANI intercalated material, a partial or total collection of the charges generated under band to band irradiation is revealed by photoluminescence studies.     

Molecular weight characterization of soluble high performance polyimides. 1. Polymer-solvent-stationary phase interactions in size exclusion chromatography

Soluble, fully cyclized m-amino phenyl acetylene terminated polyimides based on several anhydride/diamine monomers were prepared in N-methylpyrrolidine (NMP) and cyclized by solution imidization to controlled molecular weight. The polyimides and a polyamic acid precursor were successfully analyzed by size exclusion chromatography (SEC) utilizing online parallel coupled refractive index and differential viscometer detectors. The calculated M _nvalues were varied from 3,000 to 20,000 daltons. N-methylpyrrolidone (NMP), tetrahydrofuran (THF), and chloroform served as mobile phases for the cross-linked polystyrene gel packings. Normal retention behavior of the polyimides was observed in chloroform, THF, and NMP containing LiBr, or in NMP stirred over P₂O₅ before use. Values of Mark-Houwink-Sakurada exponents for narrow distribution linear polystyrene indicate that pure NMP and NMP with 0.06 M LiBr are good solvents for polystyrene standards at 60°C. In contrast, SEC behavior of polyimides in pure NMP leads to splitting of the peaks with the major portion observed to pass through the columns at the exclusion limit. In contrast to strong polymeric chain expansion of the polyamic acid in dilute solution, presumably due to a polyelectrolyte effect, no increase of intrinsic viscosity of polyimide samples in pure NMP was observed. This exclusion effect of polyimides analyzed in NMP is discussed in terms of possible ion-exclusion from pores of the stationary phase. Differences in polystyrene calibration in NMP with or without additives and the temperature dependence of calibration curves in these mobile phases is discussed as well. ©1995 John Wiley & Sons, Inc.     

Novel thermo‐responsive self‐assembly micelles from a double brush‐shaped PNIPAM‐g‐(PA‐b‐PEG‐b‐PA)‐g‐PNIPAM block copolymer with PNIPAM polymers as side chains

A novel double brush‐shaped copolymer with amphiphilic polyacrylate‐b‐poly(ethylene glycol)‐b‐poly acrylate copolymer (PA‐b‐PEG‐b‐PA) as a backbone and thermosensitive poly(N‐isopropylacrylamide) (PNIPAM) long side chains at both ends of the PEG was synthesized via an atom transfer radical polymerization (ATRP) route, and the structure was confirmed by FTIR, ¹H NMR, and SEC. The thermosensitive self‐assembly behavior was examined via UV‐vis, TEM, DLS, and surface tension measurements, etc. The self‐assembled micelles, with low critical solution temperatures (LCST) of 34–38 ^°C, form irregular fusiform and/or spherical morphologies with single, double, and petaling cores in aqueous solution at room temperature, while above the LCST the micelles took on more regular and smooth spherical shapes with diameter ranges from 45 to 100 nm. The micelle exhibits high stabilities even in simulated physiological media, with low critical micellization concentration (CMC) up to 5.50, 4.89, and 5.05 mg L^?1 in aqueous solution, pH 1.4 and 7.4 PBS solutions, respectively. The TEM and DLS determination reveled that the copolymer micelle had broad size distribution below its LCST while it produces narrow and homogeneous size above the LCST. The cytotoxicity was investigated by MTT assays to elucidate the application potential of the as‐prepared block polymer brushes as drug controlled release vehicles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Coordination of N-methylpyrrolidone to iron(II)

The use of NMP (N-methylpyrrolidone) as a cosolvent has been shown to improve the yield of iron-catalyzed cross-coupling reactions, but surprisingly there are no iron complexes of NMP in the literature. This paper reports two novel NMP complexes of iron(II): Fe₃Cl₆(NMP)₈ and L^tBuFe(NMP)Cl (L^tBu = bulky β-diketiminate ligand). The X-ray crystal structure of Fe₃Cl₆(NMP)₈ shows an octahedral cation and two tetrahedral FeCl₃(NMP)⁻ anions. ¹H NMR spectra show that the NMP ligands are labile, exchanging rapidly on the NMR time scale. The β-diketiminate complex has a trigonal pyramidal geometry with the NMP in an axial position. The use of NMP improves the yield of the catalytic cross-coupling of methyl 4-chlorobenzoate and 1-hexylmagnesium bromide using these and other iron complexes as precatalysts.     

Upper critical solution temperature switchable micelles based on polystyrene‐block‐poly(methyl acrylate) block copolymers

The solubility behavior of well‐defined poly(methyl acrylate) homopolymers as well as polystyrene‐block‐poly (methyl acrylate) block copolymers is discussed in this contribution. A solubility screening in ethanol–water solvent mixtures was performed in a high‐throughput manner using parallel turbidimetry revealing upper critical solution temperature behavior for poly(methyl acrylate). Moreover, the self‐assembly behavior of the block copolymers into micellar structures was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), and cryo‐TEM revealing upper critical solution temperature switchability of the micelles, which was evaluated by DLS at different temperatures. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and Properties of Gluconamide-Based Trisiloxane Surfactant

A gluconamide-based trisiloxane surfactant (Si3N2-GA) was prepared via a two-step method. Structure characterization of the Si3N2-GA was performed by fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). Surface activity and aggregation behavior in aqueous solution of the Si3N2-GA were investigated by surface tension measurements, dynamic light scattering (DLS), and negative-stained transmission electron microscopy (TEM). The results show that the critical micelle concentration (CAC) and surface tension (γ_CAC) at the cmc in aqueous solution of the Si3N2-GA are 3.77 × 10^?4 M and 20.5 mN · m^?1, respectively, and the surfactants can self-assemble into spherical vesicle with diameters in the range from 50 to 150 nm.     

A linear supramolecular polymer based on host-guest recognition and metal-ligand coordination

A linear main-chain supramolecular polymer was constructed in aqueous solution via γ-CD host recognition with coumarin unit as well as metalligand coordination between terpyridine unit and Zn²⁺. Besides, the self-assembly behavior and morphological property of this supramolecular polymer system were characterized by DLS and TEM experiments.     

Solvent effects on jet evolution during electrospinning of semi-dilute polystyrene solutions

Linear polystyrene with a weight average molecular weight of 393,400 g/mol was used with various solvents including tetrahydrofuran (THF), chloroform, carbon disulfide (CS₂), 1-methyl-2-pyrrolidinone (NMP), and N,N-dimethylformamide (DMF) to produce solutions, corresponding to a Berry number of about 9. The jet breakdown behavior of each of these solutions was studied with a high speed camera (2000 frames/s). The structure of the electrospun polymer was examined with a scanning electron microscope. The results indicate that jet breakdown with THF and chloroform entailed significant extensional flow, followed by the onset of instabilities, leading to the formation of numerous secondary jets under steady-state conditions. By comparison, the solution jets with DMF and NMP exhibit extensive whipping and splaying to produce a cloud of jets. In this case, few secondary jets were observed under steady-state conditions. A highly refined structure was observed in the electrospun polymer for NMP and DMF, in accordance with the extensive instabilities observed during jet breakdown. Limited jet instability observed with CS₂ solution suggests the significant effect of solvent evaporation. Typical primary jet velocities were measured to be on the order of 2-5 m/s.     

Pyrrolidone ligand improved Cu‐based catalysts with high performance for acetylene hydrochlorination

A series of Cu‐pyrrolidone/spherical activated carbon (SAC) catalysts were prepared via a simple incipient wetness impregnation method and then assessed in acetylene hydrochlorination, and the catalytic evaluation result indicated that the 1‐methyl‐2‐pyrrolidinone (NMP) ligand was found to be the most effective one to significantly improve the activity and stability of Cu catalyst. The catalyst with the optimal molar ratio of NMP/Cu = 0.25 showed 94.2% acetylene conversion at 180°C and an acetylene gas hourly space velocity of 180 h^?1. Moreover, the acetylene conversion of Cu‐0.25NMP/SAC remained stable over 99.1% for about 220 h under the industrial condition. Transmission electron microscopy (TEM) analyses proved that NMP ligand improved the dispersion of Cu species. In addition, hydrogen temperature‐programmed reduction (H₂‐TPR), X‐ray photoelectron spectra (XPS), thermogravimetric analysis (TGA), and Brunner–Emmet–Teller (BET) indicated that the additive of NMP was preferential to stabilize the catalytic active Cu⁺ and Cu²⁺ species and inhibit the reduction of Cu^α+ to Cu⁰ during the preparation process and reaction, hence restraining the coke deposition. Furthermore, the steady coordination structure between Cu and NMP was confirmed by Fourier‐transform infrared spectra (FT‐IR) and Raman combining with density functional theory (DFT) calculation, which could effectively lower the adsorption energy of catalyst for C₂H₂ and inhibit the serious carbon deposition caused by excessive acetylene self‐accumulation. Our findings suggest that the efficient, well‐stabilized cost‐effective, and environmentally friendly Cu catalyst has great potential in acetylene hydrochlorination.     

Self-Assembly of Trisiloxane-Tailed Sugar Surfactant in Aqueous Solution

Abstract

A lactobionamide-based trisiloxane surfactant (Si3N2–LA) was prepared via a two-step method. Structure characterization of Si3N2–LA was performed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR). Surface activity and aggregation behavior in aqueous solution of Si3N2–LA were investigated by surface tension measurements, dynamic light scattering (DLS) and negative-stained transmission electron microscopy (TEM). The results show that the surfactants can self-assemble into spherical vesicles with diameters in the range from 50 to 150 nm due to the introduction of trisiloxane tail.     

Synthesis and solution properties of ionic liquid-type polysiloxane bola surfactants

Three novel ionic liquid (IL)-type polysiloxane bola surfactants (ATPS-MA, ATPS-EA, and ATPS-PA) were designed and synthesized using a two-step method. Their chemical structures were characterized by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. Their surface activity and aggregation behavior in aqueous solution were systematically investigated by surface tension measurements, transmission electron microscopy (TEM), and dynamic light scattering (DLS). Surface activity measurement results indicated that the γ_CMC of the three IL-type polysiloxane surfactants are under 25 mN m^?1, and much lower than those of conventional IL hydrocarbon bola surfactants due to the introduction of siloxane group at the end of the hydrophobic chains. TEM and DLS analyses results indicated that the three surfactants can self-assemble into spherical micelles with a range from 50 to 300?nm, indicating potential uses as model systems for biomembranes and vehicles for drug delivery.     

Synthesis and self-assembly behavior of thermoresponsive triblock copolymer

Block copolymers comprising thermosensitive poly(N-isopropylacrylamide) (PNIPAM) and hydrophobic poly(n-butyl acrylate) (PBA) blocks, were synthesized using the reversible addition-fragmentation chain transfer polymerization (RAFT), their thermosensitive behavior was studied by ultraviolet spectrophotometer (UV) and dynamic light scattering (DLS). The lower critical solution temperature (LCST) was strongly correlated to the hydrophobic/hydrophilic ratio of the copolymers. Their micellization and self-assembly behavior in dilute aqueous solution were studied by surface tension (SFT), DLS and TEM. The resulting block copolymers reversibly formed or deformed micellar assemblies during their LCSTs. The critical micelle concentration (CMC) was controlled by the composition of PBA and PNIPAM, indicating the successful formation of the block copolymers.     

Complexation of Ni (II) and Zn(II) ions by 3-(1-naphthyI)-2-mercaptopropenoic acid

The complexation equilibria between Ni(II) and Zn(II) metal ions with 3-(1-naphthyl)-2-mercaptopropenoic acid (H₂NMP) were studied by glass electrode potentiometry, at 25 °C and 1.0 mol·dm^–3 in NaClO₄ as constant ionic medium in 50% (v/v) water-ethanol solutions. Formation constants for the complexes Ni(NMP), Ni(NMP) ₂ ^2– , Zn(NMP) and Zn(NMP) ₂ ^2– , refined by the MINIGLASS program, are reported.     

High-molecular-weight polyterephthalamide by direct polycondensation reaction in the presence of poly(ethylene oxide)

Polyterephthalamides of high molecular weight (η_inh up to 1.9) were obtained by the direct polycondensation reaction of terephthalic acid and aromatic diamines in the presence of poly(ethylene oxide) (PEO) with triphenyl phosphite in a N-methylpyrrolidone (NMP)–pyridine solution that contained lithium chloride. The molecular weights of the polymers produced varied with the amount and molecular weight of PEO, which showed maximum values when PEO with a molecular weight of 2.0 × 10⁴?5.0 × 10⁵ was used in a concentration of about 0.5 wt % in the solvent. The polycondensation reaction was significantly affected by the level of pyridine in a mixed solvent of NMP and pyridine and by the concentration of the lithium chloride added.     

Synthesis and Characterization of Thermo-responsive Poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) Micelles

A novel thermo-responsive diblock copolymer of poly(N-vinyl-2-pyrrolidinone)-block-poly(N-isopropylacrylamide) (PNVP-b-PNIPAM) was synthesized. FT-IR, ¹H-NMR and SEC results confirmed the successful synthesis of PNVP-b-PNIPAM diblock copolymer via anionic polymerization. The polymeric micelles formed from PNVP-b-PNIPAM copolymer in aqueous solution were developed and characterized as a potential thermo-responsive and biocompatible drug delivery system. Micellization of the diblock copolymer in aqueous solution was characterized by dynamic laser scattering (DLS), turbidity measurement, tension measurement and transmission electron microscopy (TEM). The thermo-responsive polymeric micelles with the size ranges of 200 to 260 nm and thickness of 30 nm are localized, selected and targeted for drug release, having a great potential in response to external-stimulus such as temperatures from 35 to 39°C. The critical micellization concentration (cmc) of PNVP-b-PNIPAM in aqueous solution is 0.0026 wt% determined by turbidity measurement. The size of micelles determined by DLS increased from 163 to 329 nm with increasing concentration of PNVP-b-PNIPAM from 0.25 to 0.5 wt% in aqueous solution at 40°C, which is determined by DLS.     

Molecular weight characterization of soluble high performance polyimides. 2. Validity of universal SEC calibration and absolute molecular weight calculation

Six different soluble high-performance aromatic polyimides, each prepared by solution imidization to three controlled average molecular weights, were analyzed by size exclusion chromatography (SEC) using on-line parallel coupled refractometric and viscometric detectors. N-methylpyrrolidone (NMP) with 0.06 M LiBr and NMP stirred over P₂O₅ were used as mobile phase for four of the polyimides; NMP with 0.06 M LiBr and NMP stirred over P₂O₅ were used as mobile phases for four of the polyimides; NMP with 0.06 M LiBr tetrahydrofuran (THF) and chloroform served as mobile phases for the other two polyimides. For all the samples the stationary phase in the SEC columns was cross-linked polystyrene beads. Molecular weight averages of the polyimides were calculated using universal SEC calibration with polystyrene standards in each solvent. The agreement of the calculated molecular weight averages in the different solvents confirms that the universal SEC calibrations are valid for these semiflexible polymers. There was good agreement with weightaverage molecular weights obtained by low-angle laser light scattering (LALLS) performed in pure NMP. Intrinsic viscosity and molecular weight data for a series of nine samples of one polyimide covering a M_w = 20,000–70,000 g mol^–1 interval were treated to obtain Mark-Houwink-Sakurada constants. Unperturbed chain dimensions of this polyimide were obtained by application of the Stockmayer-Fixman extrapolation procedure to these data. ©1995 John Wiley & Sons, Inc.