Monitor of Polymerization of Inverse Microemulsions Containing Methyl Methacrylate and Acrylic Acid

Microemulsions are isotropic, optically transparent and thermodynamically stabledispersion systems consisting of water, oil and suitable surfactants. Polymerization inmicroemulsions has been widely studied since 1980s, which can be divided intooil-in-wate…     

Synthesis of Sub-100 nm and Narrow Particle Size Distribution Cationic Latex by One-Step Emulsion Polymerization

A novel approach to synthesize narrow particle size distribution cationic latex particles based on styrene and butyl acrylate was proposed. The effect of monomer/water ratios, surfactant (cetyltrimethylammonium chloride) concentrations, and monomer compositions on the evolution of particle size, distribution, number, and morphology as a function of monomer conversion was concerned in order to confirm the optimum polymerization condition. As expected, the particle size of the ultima latex increased with monomer/water ratios and styrene contents decreased with increasing surfactant concentrations. Continuous nucleation phenomena occurred when monomer/water ratio was lesser than 30/70, resulting in a gradual increase in the number of particles in the whole polymerization process. Combined with the previous work (Colloid and Polymer Science, 2014, 292: 519–525), it was concluded that particle coagulation easily took place in cationic emulsion polymerization of styrene. Thus, the narrow particle size distribution cationic latexes with particle scale between 50 nm and 80 nm, 30 wt% solid content could be prepared in a short reaction time.     

Semibatch Emulsifier-free Emulsion Copolymerization of Methyl Methacrylate and n-Butyl Acrylate in the Presence of 2-Hydroxyethyl Methacrylate

ThemethodsofimProvingthestabilityofemulsifier-freeemulsionpolymerizationhavebeenreportedinliteraturet(a)choosingionizableinitiators,suchaspotassiumpersulfate'andazo-bis(isobutyramidinehydrochloride)';(b)copolymerizationwithhydrophiliccomonomers,whichinvolvestheionictypesuchascarboxylicmonomers',sulfoderivativesofvinylmonomers',andthenonionictypesuchasglycidylmethacrylate';(c)copolymerizationwithsurface-activemonomers,suchassulfodecylslyrylether';(d)addingorganicsolventstothesystem,suchasmethano…     

Investigation on the Inverse Emulsion Polymerization of Acrylic Acid

An aqueous solution of the hydrophilic monomer such as acrylic acid is dispersed in a continuous lipophilic medium using surfactants, which promote the formation of a water- in-oil (W/O) emulsion. The water-in-oil (W/O) emulsion polymerization process has shown superior characteristics1 such as the low viscosity of the dispersion, easy removal of the reaction heat2 and the high molecular weight of the obtained polymer3 etc. And it is attractive to investigate the reaction system because the…     

Studies on the Mechanism of Methyl Methacrylate Polymerization Initiated by Volatile and Nonvolatile Products of Methyl Methacrylate Plasma

ＳｔｕｄｉｅｓｏｎｔｈｅＭｅｃｈａｎｉｓｍｏｆＭｅｔｈｙｌＭｅｔｈａｃｒｙｌａｔｅＰｏｌｙｍｅｒｉｚａｔｉｏｎｉｎｉｔｉａｔｅｄｂｙＶｏｌａｔｉｌｅａｎｄＮｏｎｖｏｌａｔｉｌｅＰｒｏｄｕｃｔｓｏｆＭｅｔｈｙｌＭｅｔｈａｃｒｙｌａｔｅＰｌａｓｍａＬＩＵ...     

Synthesis of A-B-A Type Block Copolymer of Methyl Methacrylate and Styrene by Living Free-Radical Polymerization†

Abstract

A newly synthesized iniferter, N,N′-dimethyl-N,N′-bis(phenethyl)-thiuram disulfide, has been used in the free-radical living polymerization of styrene by a photochemical method. The low molecular weight (M _w = 6000) difunctionalized polystyrene was used as a macroiniferter to photopolymerize methyl methacrylate, and was fractionated to obtain an A-B-A type block copolymer containing two poly(methyl methacrylate) units and one polystyrene unit in each block. The glass transition temperature, thermal stability, and ¹³C NMR of the block copolymer are discussed.     

Synthesis of Acrylic Acid／Kaoline Powder Superabsorbent Composite by Inverse-suspending Polymerization

An acrylic acid/kaoline powder superabsorbent composite with a water absorbency of the superabsorbentcomposite about 1/800 was synthesized by inverse-suspending polymerization reaction between acrylic acidmonomer and kaoline ultrafine powder. The influence of the dispersant agent on the configuration of theproducts in the inverse suspension polymerization is investigated. The influences of the kaoline powder.cross-linker, initiator, neutralization degree and the volume ratio of oil to water phase on the water absorben-cy of the superabsorbent composites are discussed in the paper.     

Polymerization of Methyl Methacrylate in the Presence of N-Acetyl-ε-aminocaproic Acid Acetylamide

The effect of N-acetyl--aminocaproic acid acetylamide on radical polymerization of methyl methacrylate initiated with lauroyl peroxide was studied.     

Vinyl Polymerization. 254.∗ Polymerization of Methyl Methacrylate by the System Cellulose-Water-Carbon Tetrachloride

Radical polymerization of methyl methacrylate initiated by the system cellulose-water-carbon tetrachloride was kinetically studied. Results obtained are: 1) The amounts of water, carbon tetrachloride, and cellulose affected the conversion. Michaelis-Menten's equation was applied to the relationship between the rate of polymerization and the amount of MMA. 2) Other methacrylates and acrylates were also polymerized by this system. 3) When methanol or ethanol was used instead of water, some weak polymerization activity was observed. 4) Initiating ability depended on the kind of cellulose used. 5) The activity of cellulose was not changed by washing with boiling water or by solvent extraction. 6) Polymerization was inhibited by the presence of air. 7) Heating in the presence of water and carbon tetrachloride markedly decreased the activity of the cellulose.     

Synthesis Characterization and Viscosity Studies of Homopolymer of Methyl Methacrylate and Copolymer of Methyl Methacrylate and Styrene

A homopolymer of methyl methacrylate (MMA) and its copolymer with styrene at different compositions were synthesized and characterized. Viscosity measurements of the synthesized homopolymer and the copolymers in toluene solutions were performed at 313 K. Different equations were used to calculate the intrinsic viscosity, viscometric constants values, and molecular weight of the synthesized polymers. The values of intrinsic viscosity and viscosity average molecular weight obtained by the two methods (single point determination and graphical extrapolation) were compared in order to verify the validity of the single point determination for the polymers. Viscometric properties derived included the specific viscosity (it determines the contribution of the solute to the viscosity of the solution), the reduced viscosity (that provides a measure of the polymer capacity for increasing the solution viscosity), and the intrinsic viscosity.     

Polymerization of Methyl Methacrylate by Diisopropylamido bis(methylcyclopentadienyl) ytterbium Complex

Poty(methymethacryate)(PMMA)isaniInPOrtanPOlyInrwithawiderangOfusesinmateriaisandsurfaCecoatingindustrie5.lnl993,H.Yasudaetal.firstrePortedthalanhanocenehydrideandalkylcomPOundsareabletopo1ymerizemethylmethacrylateinalivingfashiontochrdtheSyndiotacticPMMAwithhighmo1ecularweightsandextremelynarrowmolecularweightdistributions[l1.Recentl}'.wehavefirstfoundthatthelanthanocenecomplexcontalningLn-Nobond(MeCp)=YbN(i-Pr)=(THF)isanotherkindofhighl'effectivecatalystfOrMMAPOtweriZationghng…     

Anionic Polymerization of New Dual-Functionalized Styrene and α-Methylstyrene Derivatives Having Styrene or α-Methylstyrene Moieties

Anionic polymerizations of four new dual-functionalized styrene and α-methylstyrene derivatives, 3-(4-(4-isopropenylphenoxy)butyl)styrene ( 4 ), 3-(4-(2-isopropenylphenoxy)butyl)-α-methylstyrene ( 5 ), 4-(4-(4-isopropenylphenoxy)butyl)-α-methylstyrene ( 6 ), and 4-(4-(2-vinylphenoxy)butyl)styrene ( 7 ), were carried out in THF at -78 °C with sec-BuLi as an initiator. Both 4 and 5 underwent anionic polymerization in a living manner to quantitatively afford functionalized polystyrenes and poly(α-methylstyrene)s having α-methylstyrene moiety in each monomer unit and precisely controlled chain lengths. On the other hand, insoluble polymers were obtained by the anionic polymerization of 6 and 7 under the same conditions. The positional effect of substituent on anionic polymerization was discussed.     

Synthesis, Characterization and Application of Benzyl-substituted Cyclopentadienyl lanthanide Complexes as Catalyst Precursors for the Syndiotactic Polymerization of Methyl Methacrylate

Benzyl-substituted cyclopentadienyl lanthanide complexes were synthesized and characterized by elemental analysis, MS and IR spectroscopy. The analytical data point out the formation of monomeric, unsolvated complexes.In conjunction with AI(Et)3 as co-catalyst, the title complexes are efficient catalysts for the syndiotactic polymerization of methyl methacrylate. For the complex (C6HsCH2C5H4)2YCl, under the optimum polymerization conditions(60℃,n(MMA):n(catalyst):n(co-catalyst)=1000:1:10),a predominantly syndiotactic (rr=66%) polymerof high molecular weight (Mη=105000) was obtained.     

Synthesis of Bowl-like Particles by Emulsion Polymerization and Release Behavior of Solvent from the Particles

Bowl-like poly (styrene-co-glycidyl methacrylate) was synthesized by swollen seeded emulsion polymerization. The polymerization was carried out in PS seed emulsion swollen by toluene, whereby the bowl-like particles formed at last. The shape was observed by SEM. These particles became ball-like when swollen by toluene, observed by optical microscope, and the release behavior of solvent from them was examined.     

Polymerization of Methyl Methacrylate by the System Ribonucleic Acid–Water in the Presence of Carbon Tetrachloride and Copper(11) Ion

Polymerization of methyl methacrylate (MMA) was carried out in the presence of ribonucleic acid (RNA), water, carbon tetrachloride, and copper(II) ion. The overall activation energy for the polymerization is proportional to the square root of the amount of RNA. The rate increased at first with the amount of MMA, but then became independent of the amount of MMA.

Polymerization was inhibited by the presence of air. Carbon tetrachloride and copper(II) ion are able to give RNA the ability to initiate polymerization. Conversion of MMA is accelerated by the addition of tertiary amine derivatives instead of carbon tetrachloride.     

Atom Transfer Radical Polymerization of Methyl Methacrylate with α,α-Dichlorotoluene or α,α,α-Trichlorotoluene as Initiator

lnAtomTransferRadicalPolymerization(ATRP),whichisanew"living"/contr0lledradicalp0lymerizati0ntechniquedevel0pedindependentlybyMatyjaszewskieIallandSawam0t0eIaP,anyalkyIhalidewithactivatedsubstituents0na-carbonsuchasaryl,carb0nyl0rallylcanbeusedasinitiatoe.Benzy1haIideandpolymerswithbenzylhalideendgr0upwerereportedtobeefficientinitiator0rmacroinitiatorfortheATRPofstyrene".H0wever,whenbenzylhalidewasusedt0initiateMMAp0Iymerization,itwasfoundthattheinitiationefficiencywasveryIowinourlabo…     

Effect of Dissolved CO_2 and Tetrahydrofuran on the Polymerization of Acrylic Acid

Recently,c0mpressedgaseshavebeenusedins0megasantisolventprocesses,suchasfractionati0n0fnaturaIproducts,recrystallization0forganicandin0rganicmaterials,andpolymerpr0cessing'2.WestudiedtheeffectofthedissovledsupercriticaICO=andTHFonthep0lymerizati0n0fAA.Itwasn0tfoundintheliterature.ExperimentalOnemlacrylicacidmonomer,O.O20ginitiator2,2'-azobis(is0butyronitrile)(AlBN),anddesiredam0unt0fTHFwereaddedintoanopticalcelloflOml.CO,wascharged,stirreduntilvap0r-liquidequilibriumwasreachedatabout30…     

Synthesis of Copolymers of Unsaturated β-Diketones with Styrene and Methyl Methacrylate

Copolymerization of styrene and methyl methacrylate with various unsaturated -diketones was studied. The influence exerted by the reaction temperature, structure of -diketone, and its content in the comonomer mixture on the kinetic parameters of copolymerization and molecular weights of the products was examined.     

Stereoselective and Asymmetric-Selective Polymerization of α-Amino Acid N-Carboxyanhydride

The enantiomer selectivity in the propagation reaction of NCA was investigated by using suitable model reactions. Contrary to the assumption usually made, the enantiomer selectivity in the nucleophilic addition of chiral amines to NCA depended strongly on the structure of amine or NCA and the solvent. In the polymerization by an activated-NCA mechanism, the addition of activated NCA to NCA was found for the first time to be enantiomer-selective. In addition to this, the chiral penultimate unit was found to participate in the enantiomer selection. Structures of the transition states leading to the different types of enantiomer selection were proposed.     

Synthesis of Methyl α-d-Allopyranoside and Methyl α-d-Ribo-hexopyranoside: A Convenient Chemoenzymatic Approach

Abstract

An efficient chemoenzymatic synthesis of methyl α-d-allopyranoside and methyl 3-deoxy-α-d-ribo-hexopyranoside starting from methyl 4,6-O-benzylidene-α-d-glucopyranoside is described.