Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Spectrothermal studies of 1,10-phenanthroline complexes of Co(II), NI(II), Cu(II) and Cd(II) orotates

The 1,10-phenanthroline (phen) complexes of Co(II), Ni(II), Cu(II) and Cd(II) orotates were synthesized and characterized by elemental analysis, magnetic susceptibility, spectral methods (UV-vis and FTIR) and thermal analysis techniques (TG, DTG and DTA). The Co(II), Ni(II), Cu(II) and Cd(II) ions in diaquabis(1,10-phenanthroline)metal(II) diorotate octahedral complexes [M(H₂O)₂(phen)₂](H₂Or)₂·nH₂O (M=Co(II), n=2.25; Ni(II), n=3; Cu(II) and Cd(II), n=2) are coordinated by two aqua ligands and two moles of phen molecules as chelating ligands through their two nitrogen atoms. The monoanionic orotate behaves as a counter ion in the complexes. On the basis of the first DTG_max, the thermal stability of the hydrated complexes follows the order: Cd(II), 68°C 68°C     

Thermal,spectral and magnetic properties of 3,5-dimethoxybenzoates of Co(II), Ni(II) and Cu(II)

The complexes of 3,5-dimethoxybenzoates of Co(II), Ni(II) and Cu(II) have been synthesized as hydrated polycrystalline solids and characterized by elemental analysis, IR, FIR and electronic spectroscopy, magnetic studies and X-ray diffraction measurements. They possess colours typical of the M(II) ions: Cu-blue, Ni-green, Co-pink. The carboxylate groups bind as monodentate or a symmetrical, bidentate chelating or bridging ligands. The thermal stabilities were determined in air. When heated they dehydrate to form anhydrous salts which are decomposed to the oxides of respective metals. The magnetic susceptibilities of the complexes were measured over the range 77-300 K and the magnetic moments were calculated. The results reveal the complexes of Ni(II) and Co(II) to be high-spin complexes and that of Cu(II) to form dimer.     

Spectrophotometric Studies of Nickel(II) and Copper(II) Chelates of p-(2-Hydroxy-1-Naphthylazo)-Benzenesulphonate

The ionization constant of p-(2-hydroxy-1-naphthylazo)benzene-sulphonate (Orange II) and the formation constants of the metal chelates of this reagent with Ni(II) and Cu(II) have been determined spectrophotometrically in aqueous solution at 25° and at an ionic strength of 0.10M. The ionization constant of orange II was found to be pK_a=10.95. Formation of orange II chelates with Ni(II) and Cu(II) was pH dependent, and the optimum pH range of the Ni(II) Chelate was at pH 9.2-9.4, and Cu(II) chelate at 9.5-9.7, respectively. The mole ratio of orange II to both of metal ions was found to be 2 to 1 stoichiometry. The formation constants (logK) of the Ni(II) and Cu(II) chelates were 12.50 and 16.11, respectively. The molar extinction coefficients and the photometric sensitivities of these chelates were determined.     

Adsorption of Ni(II), Cu(II) and Cd(II) from aqueous solutions by amino modified nanostructured microfibrillated cellulose

The aim of the present study was to investigate the adsorption properties of aminopropyltriethoxysilane (APS) modified microfibrillated cellulose (MFC) in aqueous solutions containing Ni(II), Cu(II) and Cd(II) ions. The modified adsorbents were characterized using elemental analysis, Fourier transform infrared spectroscopy, SEM and zeta potential analysis. The adsorption and regeneration studies were conducted in batch mode using various different pH values and contact times. The maximum removal capacities of the APS/MFC adsorbent for Ni(II), Cu(II), and Cd(II) ions were 2.734, 3.150 and 4.195 mmol/g, respectively. The Langmuir, Sips and Dubinin-Radushkevich models were representative to simulate adsorption isotherms. The adsorption kinetics of Ni(II) Cu(II), and Cd(II) adsorption by APS/MFC data were modeled using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetics equations. The results indicate that the pseudo-second-order kinetic equation and intra-particle diffusion model were adequate to describe the adsorption kinetics.     

Electrophilic Copper(II) → Metal(II) Substitution in Gelatin-Immobilized Copper(II) Hexacyanoferrate(II) Matrix Implants

Contact of thin layers of gelatin-immobilized copper(II) hexacyanoferrate(II) matrices with aqueous solutions of Co(II), Ni(II), Zn(II), and Cd(II) chlorides results in partial substitution of these ions for Cu(II) to give (dd)-heterobinuclear hexacyanoferrates(II) of copper(II) and the corresponding double-charged ion.     

Study of the kinetics of the transport of Cu(II), Cd(II) and Ni(II) ions through a liquid membrane

The coupled transport of Cu(II), Cd(II) and Ni(II) ions through a bulk liquid membrane (BLM) containing pyridine-2-acetaldehyde benzoylhydrazone (2-APBH) as carrier dissolved in toluene has been studied. Once the optimal conditions of extraction of each metal were established, a comparative study of the transport kinetics for these metals was performed by means of a kinetic model involving two consecutive irreversible first-order reactions. The kinetic parameters (apparent rate constants of the metal extraction and re-extraction reactions (k ₁, k ₂), the maximum reduced concentration of the metal in the liquid membrane (), the time of the maximum value of R _o ( t _max) and the maximum entry and exit fluxes of the metal through the liquid membrane ( and ) of the extraction and stripping reactions were evaluated and results showed good agreement between experimental data and theoretical predictions. Complete transport through the membrane took place according to the following order: Cd(II)>Cu(II)>Ni(II), with similar kinetic parameters obtained for Cu(II) and Cd(III). The transport behaviour of Ni(II) was different to that of Cu(II) and Cd(III), probably due to the different stoichiometry of the nickel complex compared to those of the other metal ions and the different chemical conditions required for its formation. The influence of the sample salinity on the transport kinetics was studied. k ₁ values decreased slightly when the feed solution salinity was increased for Cu(II) and Ni(II), but not for Cd(II). Values of k ₂ were practically unaffected. The proposed BLM was applied to the preconcentration and separation of metal ions (prior to their determination) in water samples with different saline matrices (CRM, river water and seawater), and good agreement with the certified values was obtained.     

Synthesis of a New Cu(II)-Ion Imprinted Polymer for Solid Phase Extraction and Preconcentration of Cu(II)

A new Cu(II)-ion imprinted polymer (IIP) has been synthesized by copolymerizing salicylic acid and formaldehyde as a monomer and crosslinker, respectively in the presence of Cu(II)-4-(2-pyridylazo) resorcinol complex. The imprinted Cu(II) ions were completely removed by leaching the IIP with 0.05 M EDTA. The maximum adsorption capacity for Cu(II) ions was 310 μg g⁻¹ at pH 6. The IIP was repeatedly used in adsorption–desorption experiments for seven times with recoveries ~95%. The relative selectivity factor (α _r) values of Cu(II)/Zn(II), Cu(II)/Cd(II), Cu(II)/Ni(II) and Cu(II)/Co(II) are 3.17, 2.90, 2.47 and 3.37, respectively. The detection limit corresponding to three times the standard deviation of the blank was found to be 3.0 μg L⁻¹. The developed IIP has also been tested for preconcentration and recovery of Cu(II) ions from water samples.

     

Utilization of olive pomace in nano MgO modification for sorption of Ni(II) and Cu(II) metal ions from aqueous solutions

Magnesium oxide nanoparticles were synthesized and modified by olive pomace (NMOOP700) as a novel sorbent and characterized using Fourier Transform Infrared Spectra, Scanning Electron Microscope, Transmission Electron Microscope, X-ray Diffraction, Differential Thermal Analysis and Thermal Gravimetric Analysis. Sorption of Cu (II) or Ni (II) ions were achieved taking into account important parameters including initial pH of the medium, contact time, initial metal ion concentration and temperature. A comparative study between Magnesium oxide nanoparticles and NMOOP700 material for the sorption of Cu (II) or Ni (II) ions was implemented. The obtained data revealed that the sorption process is significantly improved using NMOOP700. The monolayer capacity of Ni (II) and Cu (II) metal ions on NMOOP700 at pH 5 were found to be 149.93 ± 4.4 and 186.219 ± 6.3 mg/g, respectively. Findings of the present work highlight the potential use of NMOOP700 as a novel and effective sorbent material for the removal of Cu (II) or Ni (II) ions from the liquid phase.     

Copper(II) ion-selective microelectrochemical transistor

A device has been developed for the measurement of copper(II) ions (Cu²⁺) in aqueous medium. The device reported here is an electrochemical transistor which consists of two platinum electrodes separated by 100 μm spacing and bridged with an anodically grown film of polycarbazole. Polycarbazole film (undoped form) is observed to be highly selective for the Cu(II) ions. In a completed device, the conductivity of the polycarbazole film changes on addition of Cu(II) ions. The change in conductivity is attributed to the conformational changes in the polymer phase on occupation of the Cu(II) ions, without affecting electron/proton transfer. The device turns on by adding 2.5 × 10⁻⁶ M Cu(II) ions and reaches a saturation region beyond 10⁻⁴ M Cu(II) ion concentrations. In the above concentration range, the device response [I _D vs. log Cu(II) ion concentration] is linear. The selectivity of the device for other metal ions such as Cu(I), Ni(II), Co(II), Fe(II), Fe(III), Zn(II) and Pb(II) is also studied. Received: 6 April 1999 / Accepted: 20 August 1999     

Effect of the pH on the complexation of Cu(II), Ni(II) and Fe(III) Ions by a vine leaf litter extract by fluorescence quenching

An extract of dead vine leaves (vitis viniferal) (VLE) was obtained by the extraction procedure for fulvic acids and its interaction (at a concentration of 25mg/L in 0.1 M KNO₃) with the Cu(II), Ni(II) and Fe(III) ions was studied in the pH range between 3 and 6. This interaction was monitored by synchronous molecular fluorescence, since bands due to the fluorescent ligands undergo quenching upon complex formation. After the chemometric isolation of the quenching profiles from the raw spectra by a self-modeling mixture analysis, SIMPLISMA, they were analyzed by two methods: (i) graphical procedures based on the Stern-Volmer model; and (ii) a non-linear least-squares procedure. For the Cu(II) and Ni(II) ions, the treatment by these two methods provided similar values both for the logarithm of the conditional stability constants (log Kc) and the percentage of fluorescent structures that do not participate in the complexation. The log Kc were (standard deviations in parenthesis): Cu(II) ion, 2.4 (3), 3.37(3), 4.4(1) and 4.92(9), respectively, for pH = 3, 4, 5 and 6; Ni(II)ion, 2.9(1), 3.3(2), and 4.09(3), respectively, for pH = 4, 5 and 6. For Fe(III) an interaction with VLE was observed, but no values for Kc could be obtained.     

Binary and Ternary Complexes Involved in the Systems Methioninehydroxamic Acid - Glycylglycine - Ni(II) or Cu(II) Ions

The formation constants of binary and ternary complexes involved in the systems methioninehydroxamic acid (MX), glycylglycine (GG) and Cu(II) or Ni(II) were determined by pH-metric titration in aqueous solution at an ionic strength (I)= 0.15 M NaCl) and T = 25°C. Ternary species of the type (MX : GG : Ni(II) or Cu(II) : H) = (1 : 1 : 1 : r), (2 : 1 : 1 : r) and (1 : 2 : 1 : r) exist in the pH range ～3 to ～10. Differential pulse polarography (DPP) was used to follow complex formation and to study the reduction properties of these metal ions in the presence of MX, and GG. The metal oxidation states were more stabilized in the ternary systems than in the binary systems except for a few Ni(II) systems. Spectral studies in the UV-Vis-nIR were used to monitor the presence of ternary species in the Ni(II) and Cu(II) systems. In addition, EPR studies were also used to record the magnetic properties of the binary and ternary species in the Cu(II) systems.     

Adsorptive accumulation of Cd(II), Co(II), Cu(II), Pb(II), and Ni(II) from water on montmorillonite: influence of acid activation

The present work investigates the influence of acid activation of montmorillonite on adsorption of Cd(II), Co(II), Cu(II), Ni(II), and Pb(II) from aqueous medium and comparison of the adsorption capacities with those on parent montmorillonite. The clay-metal interactions were studied under different conditions of pH, concentration of metal ions, amount of clay, interaction time, and temperature. The interactions were dependent on pH and the uptake was controlled by the amount of clay and the initial concentration of the metal ions. The adsorption capacity of acid-activated montmorillonite increases for all the metal ions. The interactions were adsorptive in nature and relatively fast and the rate processes more akin to the second-order kinetics. The adsorption data fitted both Langmuir and Freundlich isotherms, indicating that strong forces were responsible for the interactions at energetically nonuniform sites. The Langmuir monolayer capacity of the acid-activated montmorillonite is more than that of the parent montmorillonite (Cd(II): 32.7 and 33.2 mg/g; Co(II): 28.6 and 29.7 mg/g; Cu(II): 31.8 and 32.3 mg/g; Pb(II): 33.0 and 34.0 mg/g; and Ni(II): 28.4 and 29.5 mg/g for montmorillonite and acid-activated montmorillonite, respectively). The thermodynamics of the rate processes showed the adsorption of Co(II), Pb(II), and Ni(II) to be exothermic, accompanied by decreases in entropy and Gibbs free energy, while the adsorption of Cd(II) and Cu(II) was endothermic, with an increase in entropy and an appreciable decrease in Gibbs free energy. The results have established the potential use for montmorillonite and its acid-activated form as adsorbents for Cd(II), Co(II), Cu(II), Ni(II), and Pb(II) ions from aqueous media.     

Synthesis and spectroscopic studies of novel Cu(II), Co(II), Ni(II) and Zn(II) mixed ligand complexes with saccharin and nicotinamide

Four novel mixed ligand complexes of Cu(II), Co(II), Ni(II) and Zn(II) with saccharin and nicotinamide were synthesised and characterised on the basis of elemental analysis, FT-IR spectroscopic study, UV–Vis spectrometric and magnetic susceptibility data. The structure of the Cu (II) complex is completely different from those of the Co(II), Ni(II) and Zn(II) complexes. From the frequencies of the saccharinato CO and SO₂ modes, it has been proven that the saccharinato ligands in the structure of the Cu complex are coordinated to the metal ion ([Cu(NA)₂(Sac)₂(H₂O)], where NA — nicotinamide, Sac — saccharinato ligand or ion), whilst in the Co(II), Ni(II) and Zn(II) complexes are uncoordinated and exist as ions ([M(NA)₂(H₂O)₄](Sac)₂).     

Study of binary complexes of Cu(II), Ni(II) and Co(II) with sulfamethazine by voltammetry

Cyclic voltammetry (CV) and square-wave voltammetry (SWV) techniques have been used to study the binary complexes of Co(II), Ni(II) and Cu(II) with sulfamethazine (SMZ) at a static mercury drop electrode (SMDE) in 0.04 M Britton-Robinson (B-R) buffer. SMZ gave three peaks at 0.01, −1.32 and −1.55 V. Cu(II)-SMZ complex was recognized by a cathodic peak at −0.38 V. Ni(II)-SMZ complex was reduced at more positive potential (−0.77 V) than that of the hydrated Ni(II) ions (−1.08 V). Co(II)-SMZ complex is investigated at pH 7 and 8. The Co(II) complex at pH 7 is appeared as a shoulder at −1.19 V, whereas this peak becomes a well-separated form at pH 8. The study indicated that the SMZ serves as a catalyst in the reduction of Co(II) and Ni(II) ions. From electronic spectra data of the complexes, their stoichiometries of 1: 2 (metal-ligand) in aqueous medium are determined. The stability constants of the complexes are in agreement with the Irwing-Williams series (Co < Ni < Cu).     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

New Complexes of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with 3,3-dimethylglutaric Acid

Conditions for the preparation of Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)3,3-dimethylglutarates were investigated and their quantitative composition, solubility in water at 293 K and magnetic moments were determined. IR spectra and powder diffraction patterns of the complexes prepared with general formula MC₇H₁₀O₄⋅nH₂O (n=0−2) were recorded and their thermal decomposition in air were studied. During heating the hydrated complexes of Mn(II),Co(II), Ni(II) and Cu(II) are dehydrated in one step and next all the anhydrous complexes decompose to oxides directly (Mn, Co, Zn) or with intermediate formation free metal (Ni,Cu) or oxocarbonates (Cd). The carboxylate groups in the complexes studied are bidentate. The magnetic moments for the paramagnetic complexes of Mn(II), Co(II), Ni(II) and Cu(II)attain values 5.62, 5.25, 2.91 and 1.41 M.B., respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

Interaction of Cu(II) and Cd(II) ions with DNA from Spirulina platensis

Equilibrium dialysis and atomic absorption analysis were used to obtain adsorption isotherms and determine the stoichiometric binding constants of Cu(II) and Cd(II) ions to DNA from Spirulina platensis in solutions. The stoichiometric constants of Cu(II) and Cd(II) ions with DNA from S. platensis in 3 mM NaCI are 15.56⋅10⁴ and 14.40⋅10⁴, respectively. Effect of ionic strength and DNA GC content on binding constants of Cu(II)- and Cd(II)-DNA complexes were studied out. It was showed that the binding constants of Cu(II)- and Cd(II)-DNA complexes decrease with increase of ionic strength. The empirical dependences of logK on the GC content has been derived for Cd(II)- and Cu(II)-DNA complexes.     

Removal of As(V) by Cu(II)-, Ni(II)-, or Co(II)-doped goethite samples

The present study reports removal of As(V) by adsorption onto laboratory-prepared pure and Cu(II)-, Ni(II)-, and Co(II)-doped goethite samples. The X-ray diffraction patterns showed only goethite as the crystalline phase. Doping of ions in the goethite matrix resulted in shift of d-values. Various parameters chosen for adsorption were nature of adsorbent, percentage of doped cations in goethite matrix, contact time, solution pH, and percentage of adsorbate. It was observed that the pH(pzc) of the goethite surface depended on the nature and concentration of metal ions. The surface area as well as the loading capacity increased with the increase of dopant percentage in goethite matrix. A maximum loading capacity of 19.55 mg/g was observed for 2.7% Cu(II)-doped goethite. The adsorption kinetics for Ni(II), Co(II) and for undoped goethite attained a quasi-equilibrium state after 30 min with almost negligible adsorption beyond this time. In case of Cu(II)-doped goethite samples, the quasi-equilibrium state for As(V) adsorption was observed after 60 min. At each studied pH condition, it was observed that the percentage of adsorption of As(V) decreased in the order Cu(II)-doped goethite > or = Ni(II)-doped goethite > Co(II)-doped goethite > pure goethite. The adsorption followed: Langmuir isotherm, indicating monolayer formation.     

Copper(II), Nickel(II) and Cobalt(II) Complexes of Dibasic Tridentate Schiff Bases

Complexes of Cu(II), Ni(II) and Co(II) with the Schiff bases derived from o-aminobenzoic acid with salicylaldehyde and its 5-chloro and 5-bromo derivatives have been prepared. The 1:1 (metal-ligand) stoichiometry of these complexes is shown by elemental analysis, gravimetric estimations and conductometric titrations while the structures of the complexes are proved by i.r. spectra and thermogravimetric analysis. The magnetic susceptibility and electronic spectra of Cu(II) complexes indicate the nonplanar binuclear structures while that of Ni(II) and Co(II) show their paramagnetic octahedral geometry. The molar conductance values in nitrobenzene indicate the nonelectrolytic behaviour of the complexes. The results show that the complexes of the type (Cu·L)₂, Ni·L·3H₂O and Co·L·3H₂O are formed having solvent molecule in coordination with the metal ion. The monopyridine and monoammonia adducts of Cu(II) complexes were found to be monomeric.