Reverse Atom Transfer Radical Polymerization of (-)-Menthyl Methacrylate

The reverse atom transfer radical polymerization(RATRP)of (-)-menthyl methacrylate ((-)-MnMA) with AIBN(AIBM/CuCl2/bipyridine(bipy) or (-)sparteine((-)Sp)=1/2/4 initiating system in THF has been studied.The dependence of the specific rotation on molecular weight was investigated.     

Three‐Arm Star Homo‐ and Block Co‐Polymers Via Atom Transfer Radical Polymerization

Star homopolymers of some vinyl monomers such as methyl methacrylate, n‐butyl methacrylate and styrene (MMA, nBMA, St.) were prepared by using a N,N,N′N′‐tetramethylethylenediamine ligand/CuBr catalytic system via atom transfer radical polymerization (ATRP). A three armed benzene based core was successfully used as initiator. Low polydispersities and regular molecular weight values were obtained in most cases, especially at low conversions. MMA and BMA showed comparable behavior where controlled and true ATRP was observed even at high conversions. However, styrene monomer recorded irregular high polydispersities at high conversions in spite of the relatively low molecular weight values. Some block copolymers were obtained using MMA homopolymer as macroinitiator with the same strategy of ATRP. ¹H‐NMR confirmed the structures of the resulting polymers. Transmission electron microscopy (TEM) proved the nano‐structure of the star polymers. The thermal behavior of the MMA star homo and copolymers was studied. The effect of the star shape on thermal behavior was very clear with respect to the linear ones.     

A New Initiator Cholesteryl Chloroformate for Cupper-Based Atom Transfer Radical Polymerization of Methyl Methacrylate

The polymerization of metyl methacrylate (MMA) was studied in detail by use of CuCI/L as a catalyst and cholesteryl chloroformate (CC) as an initiator. It was found that the atom transfer radical polymerization of MMA could proceed when L equals to a multidentate aliphatic amine ligand, N,N,N‘,N“,N“-penta(methyl acrylate)diethylenetriamine (MA5-DETA), and no polymerization was occurred while L=2,2‘-bipyridine and 1,10phenanthroline. The linear proportionality of the molecular weights to the conversions and straight lines observed in ln[M]0/[M] versus time plots indicated that the present polymerization system had the typical controlled polymerization characteristics.     

N-Chlorosuccinimide(NCS):A Novel Initiator for Atom Transfer Radical Polymerization of Methyl Methacrylate

Atom transfer radical polymerization （ATRP） of methyl methacrylate （MMA） was achieved, using N-chlorosuccinimide （NCS） as an initiator together with catalytic system CuCl/PMDETA （N,N,N＇,N＇,N＂-pentamethyldiethylenetriamine）, CuCl/MA5-DETA （N,N＇,N＇,N＂-penta（methylacrylate）diethylenetriamine）, and CuCl/bipy （bipy= 2,2＇-bipyridyl） respectively. The results indicated that the polymerization possessed typical controlled/living radical polymerization characteristics. The analysis for terminal group of obtained polymer by ^1H NMR proved that NCS is an initiator for ATRP. In comparison with NBS, the polymerization rate was slower and the resulted polymer had narrower molecular weight distribution （MWD） when NCS was employed as the initiator.     

Synthesis of Dendritic-Linear Block Copolymers by Atom Transfer Radical Polymerization

Polymers and copolymers with complex, yet well-defined architectures are drawing significant attentions in the search for materials with excellent properties. Of these macromolecular structures, dendritic-linear block copolymers consisting of covalently bound linear and dendritic segments have shown interesting solution, solid-state, and interfacial properties. As a novel polymerization approach, atom transfer radical polymerization (ATRP) has been attracting increasing interest recently, sin…     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Chromatographic Properties of a “Comb-like” Chiral Stationary Phase Prepared via Atom Transfer Radical Polymerization

A “comb-like” chiral stationary phase was developed using surface-initiated technique via atom transfer radical polymerization (ATRP). Chlorinated silica gel was produced as the ATRP initiator in a one-step reaction with thionyl chloride. This initiation method results in a hydrolytically stable initial Si–C bond for poly(glycidyl methacrylate) (pGMA) chains grafted on the surface of silica gel. β-Cyclodextrin (β-CD) was immobilized on the pGMA chains with ring opening reaction to prepare the chiral stationary phase. This “comb-like” chiral stationary phase with the different pGMA chain length was evaluated by enatioseparation of structurally diverse racemic compounds under reversed-phase high-performance liquid chromatography. The chromatographic results demonstrate the effective chiral separation ability of the new chiral stationary phase.     

Chromatographic Properties of a “Comb-like” Chiral Stationary Phase Prepared via Atom Transfer Radical Polymerization

A “comb-like” chiral stationary phase was developed using surface-initiated technique via atom transfer radical polymerization (ATRP). Chlorinated silica gel was produced as the ATRP initiator in a one-step reaction with thionyl chloride. This initiation method results in a hydrolytically stable initial Si–C bond for poly(glycidyl methacrylate) (pGMA) chains grafted on the surface of silica gel. β-Cyclodextrin (β-CD) was immobilized on the pGMA chains with ring opening reaction to prepare the chiral stationary phase. This “comb-like” chiral stationary phase with the different pGMA chain length was evaluated by enatioseparation of structurally diverse racemic compounds under reversed-phase high-performance liquid chromatography. The chromatographic results demonstrate the effective chiral separation ability of the new chiral stationary phase.

     

Synthesis and Characterization of Star Polymer with Comb-like Poly(lauryl methacrylate) Arms by Atom Transfer Radical Polymerization via One-pot ‘Arm-First’ Method

Atom transfer radical polymerization (ATRP) was used to prepare core crosslinked star polymers with comb-like poly (lauryl methacrylate) (LMA) arms by one-pot “arm-first” method, involving the synthesis of comb-like PLMA arms, followed by their crosslinking, using a mixture of LMA monomer and ethylene glycol dimethacrylate (EGDMA) crosslinker. By adjusting the feeding time and level of EGDMA, a series of star-like polymers with various comb-like arms length and number can be obtained. The molecular architecture including radius of gyration (Rg), hydrodynamic radius (Rh) and intrinsic viscosity (η_i) etc. were characterized by a triple-detector gel permeation chromatography (GPC) equipped with a refractive index detector, viscometer detector and a multi-angle static laser light scattering (MALLS) detector. The thermal property and shearing stability of these star-like polymers were also investigated.     

Atom Transfer Radical Polymerization of Methyl Methacrylate with α,α,α′,α′‐Tetrachloroxylene as an Initiator

The homogeneous ATRP of methyl methacrylate (MMA) using α,α,α′,α′‐tetrachloroxylene (TCX)/CuCl/N,N,N′,N″,N″–pentamethyldiethylenetriamine (PMDETA) as the initiating system has been successfully carried out. The kinetic plots showed first order relationship vs. monomer concentration. Well‐controlled polymerizations with low polydispersities (M_w/M_n=1.15?1.25) polymers have been achieved. The molecular weights increased linearly with monomer conversions and were close to the theoretical values, indicating high initiation efficiency. The polymerization rate increased significantly with an increase of TCX concentration. The rate of polymerization was about 0.6 orders with respect to the concentration of initiator. The polymerization rate increased significantly with an increase of CuCl concentration. The dependence of ln k_p ^app on ln ([CuCl]₀) indicated a 0.91 order. The apparent activation energy was calculated ΔE_app ^≠=43.3 KJ/mol, and the enthalpy of the equilibrium, ΔH_eq ⁰, was estimated to be 21.1 KJ/mol. The structure of obtained PMMA was analyzed by means of ¹H NMR spectroscopy. The result proved that the TCX acted as a bifunctional initiator for ATRP of MMA.     

Atom Transfer Radical Polymerization of Methyl Methacrylate with α,α-Dichlorotoluene or α,α,α-Trichlorotoluene as Initiator

lnAtomTransferRadicalPolymerization(ATRP),whichisanew"living"/contr0lledradicalp0lymerizati0ntechniquedevel0pedindependentlybyMatyjaszewskieIallandSawam0t0eIaP,anyalkyIhalidewithactivatedsubstituents0na-carbonsuchasaryl,carb0nyl0rallylcanbeusedasinitiatoe.Benzy1haIideandpolymerswithbenzylhalideendgr0upwerereportedtobeefficientinitiator0rmacroinitiatorfortheATRPofstyrene".H0wever,whenbenzylhalidewasusedt0initiateMMAp0Iymerization,itwasfoundthattheinitiationefficiencywasveryIowinourlabo…     

Synthesis of Highly Branched Poly（ε-caprolactone） by Self-condensing Atom Transfer Radical Polymerization of Macroinimers

Fréchet et al.1 in 1995 prepared hyperbranched vinyl polymers by the technique named self-condensing vinyl polymerization (SCVP) of initiator-monomers (“inimers”) having the general structure AB*, where A stands for a double bond and B* for an initiati…     

Radical Polymerization and Copolymerization of Methyl α-(Fluoroalkoxymethyl)acrylates and Characterization of Their Polymers

Abstract

Representatives of a new type of fluorine-containing monomer, methyl α-(fluoroalkoxymethyl)acrylates (MCFMA's), were prepared. The fluoroalkoxy groups introduced were OCH₂CF₃, OCH₂CF₂CF₂H, and OCH(CF₃)₂. All the monomers synthesized readily polymerized to number-average molecular weights of 55,000 to 110,000 at a 2 mol/L monomer concentration in dioxane using 5 × 10^?3 mol/L of 2,2′-azobisisobutyronitrile at 60°C. The polymerization rate tended to decrease slightly with an increase in the size of the alkoxy group. Copoly-merization of MCFMA's with styrene revealed that the fluoroalkoxy-methyl group functions as an electron-attracting group depending on the number of fluorine atoms. According to thermogravimetric analysis, poly(MCFMA)'s were thermally less stable than poly(methyl methacrylate). Greater contact angles of the polymers from MCFMA's with water than poly(methyl methacrylate) were observed.     

Study on Synthesis of Star‐Shaped Poly(ethylene oxide) by Atom Transfer Radical Polymerization

Star‐shaped poly(ethylene oxide) (PEO) was prepared by atom transfer radical polymerization (ATRP) with a 2‐bromoisobutyryl PEO ester as a macroinitiator. Divinylbenzene (DVB) and ethylene glycol dimethacrylate were employed as the coupling reagents. Several factors pertinent to star polymer formation are: type of coupling reagents and solvents, feed ratio of DVB to the macroinitiator, and reaction time. These were studied and used to optimize the star formation process. The optimum yield of star polymer was ca. 90–98%.     

Semibatch Emulsifier-free Emulsion Copolymerization of Methyl Methacrylate and n-Butyl Acrylate in the Presence of 2-Hydroxyethyl Methacrylate

ThemethodsofimProvingthestabilityofemulsifier-freeemulsionpolymerizationhavebeenreportedinliteraturet(a)choosingionizableinitiators,suchaspotassiumpersulfate'andazo-bis(isobutyramidinehydrochloride)';(b)copolymerizationwithhydrophiliccomonomers,whichinvolvestheionictypesuchascarboxylicmonomers',sulfoderivativesofvinylmonomers',andthenonionictypesuchasglycidylmethacrylate';(c)copolymerizationwithsurface-activemonomers,suchassulfodecylslyrylether';(d)addingorganicsolventstothesystem,suchasmethano…     

Synthesis and Characterization of Four-Arm Star Poly(ϵ-caprolactone)-Block-Poly(cyclic-carbonate methacrylate) Copolymers by Combining Ring-Opening Polymerization With Atom Transfer Radical Polymerization

Well-defined four-arm star poly(?-caprolactone)-block-poly(cyclic carbonate methacrylate) (PCL-b-PCCMA) copolymers were synthesized by combining ring-opening polymerization (ROP) with atom transfer radical polymerization (ATRP). First, a four-arm poly(?-caprolactone) (PCL) macroinitiator [(PCL-Br)₄] was prepared by the ROP of ?-CL catalyzed by stannous octoate at 110°C in the presence of pentaerythritol as the tetrafunctional initiator followed by esterification with 2-bromoisobutyryl bromide. The sequential ATRP of CCMA monomer was carried out by using the (PCL-Br)₄ tetrafunctional macroinitiator (MI) and in the presence of CuBr/2, 2′-bipyridyl system in DMF at 80°C with [(MI)]:[CuBr]:[bipyridyl] = 1:1:3 to yield block polymers with controlled molecular weights (M_n (NMR) = 10700 to 27300 g/mol) by varying block lengths and with moderately narrow polydispersities (M_w/M_n = 1.2–1.4). Block copolymers with different PCL: PCCMA copolymer composition such as 50:50, 70:30 and 74:26 were prepared with good yields (48-74%). All these block copolymers were well characterized by NMR, FTIR and GPC and tested their thermal properties by DSC and TGA.     

Brush Type Copolymers of Poly(3-hydroxybutyrate) and Poly(3-hydroxyoctanoate) with Same Vinyl Monomers via “Grafting From” Technique by Using Atom Transfer Radical Polymerization Method

Brush type graft copolymers of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyoctanoate) (PHO) with methylmethacrylate, (MMA), styrene, (S), and n-butylmethacrylate, (n-BuMA) were obtained by using Atom Transfer Radical Polymerization Method, (ATRP), via “grafting from” technique. Firstly PHB and PHO were chlorinated by passing chlorine gas through their solution in CHCl₃/CCl₄ (75/25 v/v) mixture and CCl₄, respectively, in order to prepare chlorinated PHB, PHB-Cl, and chlorinated PHO, PHO-Cl, with different chlorine contents. The determination of the chlorine content in chlorinated poly(3-hydroxyalkanoate) (PHA-Cl) was performed by the Volhard Method. Then ATRP of vinyl monomers was initiated by using PHA-Cl as macroinitiators in the presence of cuprous chloride (CuCl)/2,2′-bipyridine complex as catalyst, at 90 °C in order to obtain brushes containing PHAs. The polymer brushes were fractionated by fractional precipitation methods and the γ values calculated from the ratio of the volume of nonsolvent (methanol) and the volume of solvent (chloroform) of brushes varied between 0.82 and 6.50 depending on the composition of brushes. The polymer products were characterized by gel permeation chromatography (GPC), ¹H NMR, FTIR, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques.     

Atom Transfer Radical Polymerization of Styrene with 5‐Chloromethyl‐2‐hydroxy‐benzaldehyde as Initiator

Abstract

Atom transfer radical polymerization (ATRP) of styrene (St) proceeded using 5‐chloromethyl‐2‐hydroxy‐benzaldehyde as initiator, CuCl as catalyst, and N,N,N′,N′,N′‐pentamethyldiethyltriamine (PMDETA) as ligand. The results show that the polymerization is a first order reaction with respect to monomer concentration. The polymerization displayed living character as evidenced by a liner increase of monomer weight with conversation and a relatively narrow distribution (M _n/M _w ranges from 1.25 to 1.50). The end structure of PSt was analyzed by ¹H‐NMR, and PSt initiated MMA to form block copolymer (PSt‐b‐PMMA), which also proved that the polymerization could be controlled. The effects of reaction temperature and monomer to initiator mole ratio on the polymerization displayed living character were discussed.     

Determination of Absolute Rate Constants for Radical Polymerization and Copolymerization of Ethyl α-Chloroacrylate: Effects of Substituents on Reaction Rates of Monomer and Polymer Radical

The propagation and termination rate constants (k_p and k_t) for the radical polymerization of ethyl a-chloroacrylate (ECA) were determined by the rotating sector method k_p = 1660 and k_t = 3.33 × 10⁸ L/mol?s at 30° C. The absolute rate constants for cross-propagations in copolymerization were evaluated from the k_p determined for ECA or those for common monomers and the monomer reactivity ratios. The reactivities of ECA and poly-(ECA) radicals estimated as the rate constants of cross-propagations were accounted for by using equations relating these rate constants to the polar and resonance effects of the substituents. ECA was highly reactive toward various polymer radicals as expected from the resonance effects of the carbethoxy and chloro substituents. The poly(ECA) radical was found to be more reactive than common polymer radicals. The reactivity of a polymer radical in cross-propagation seemed to increase with increasing electron-accepting power by facilitating electron transfer from a monomer required for the new C-C bond formation.     

Isotactic Regulation in the Radical Polymerization of Calcium Methacrylate: Is Multiple Chelation the Key to Stereocontrol?

Accurate quantum chemistry is used to explain the origins of isospecificity in radical polymerization of calcium methacrylate hydrate (CaMA). Distonic radical–cation interactions are shown to be crucial in determining the reactivity of different coordination structures. Cation coordination to the terminal and incoming monomer side chains reduces radical-cation separation, enhancing the reactivity of these modes over the stereocontrolling terminal-penultimate binding modes. This explains why Lewis acid-mediated radical polymerization often fails to produce highly isotactic polymer for common monomers such as methyl methacrylate. However, theoretical calculations suggest that the poly(CaMA) terminus forms a chelated bridging scaffold in N,N-dimethylformamide (DMF), which involves the terminal, penultimate and incoming monomer carboxylate groups. This scaffold simultaneously activates the incoming monomer toward propagation and regulates the relative orientation of the terminal and penultimate side chains. The bridging scaffold is disrupted in more polar solvents and/or if alternative nonchelating counter-cations are employed, leading to loss of isotactic control. These results suggest that higher levels of isotactic control may be achievable if reaction conditions are optimized to favor bridging scaffold formation. The broader importance of these findings to stereocontrol in radical polymerization is also discussed. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 52–61