Defining an Optimal Mode of Curing of Epoxy–Amine Systems by TTT Diagrams

The data from differential scanning calorimetry, dynamic light scattering, rheoviscometry, and gelsol analysis are used to construct TTT diagrams for curing epoxy–amine systems, which are able to transform into a glassy state upon isothermal curing. Using these diagrams, a new method is suggested for calculation of an optimal mode of curing, which includes two isothermal steps, namely, precuring and postcuring. The use of this mode of process performance allows one to obtain fully cured epoxy–amine samples with stable properties.     

The Kinetics of Crystallization of Poly(tetrafluoroethylene) by the Action of γ-Radiation

The kinetics of crystallization of PTFE over the temperature range 287–310 K upon its -irradiation to a dose of 220 kGy was studied using calorimetric procedures. Parameters for the models of radiation-induced growth in the degree of crystallinity (expressed as the mass fraction) of bulk and film polymer specimens were calculated. It was shown that the degree of perfection of crystals produced upon irradiation can be determined from the heat of transition at T 293 K characteristic of PTFE.     

Thermoreversible Gelation of Poly(vinylidene fluoride) – Camphor System

Poly (vinylidene fluoride) (PVF₂) produces thermoreversible gel in camphor when quenched to 25°C from the melt under sealed condition. The SEM micrograph of dried PVF₂/camphor gel (Wequation/tex2gif-inf-3.gif= 0.25) indicates presence of fibrillar network structure and the gels at different composition shows reversible first order phase transition. The phase diagram of the gel suggest the formation of a polymer- solvent complex. The melting enthalpy gives a stoichiometric composition of the complex at Wequation/tex2gif-inf-5.gif= 0.25. This corresponds to a molar ratio of PVF₂ monomer/camphor ≈ 4/5. Temperature-dependent synchroton experiments further support the conclusions derived from the phase diagram.     

Synthesis and Characterization of Polyurethane/Poly (Urethane Modified Bismaleimide-Bismaleimide) IPNs

Themethodofblendingbyinterpenetratingpolymernetworks(IPNs)isoftenusedtoobtainelastomerswithpropertiesinexcessofthoseexhibitedbytraditionalblendingways'.Inthispaper,aseriesofnovelpolyurethane/poly(urethanemodifiedbismaleimide-bismaleimide)(PU/P(UBMI-BMI))IPNsweresynthesizedandcharacterizedby'HNMR,FTIR,TEM,andTGAanaIysis.BMIwassynthesizedasfollowsfUBMlwasintroducedtomodifythecompatibilityofthetwonetworks,whichwassynthesizedasfollows:Where(l)ishydroxyl-terminatedpoly(diethyleneadipa…     

Phase Behavior of Poly(Oxyethylene)–Poly(Oxypropylene)–Poly(Oxyethylene) Block Copolymer in Water and Water–C12EO5 Systems

Abstract

The binary phase diagram of a triblock copolymer poly(oxyethylene) (PEO) poly(oxypropylene) (PPO) poly(oxyethylene) (PEO), (PEO)₃₇(PPO)₅₈(PEO)₃₇ or P105 in water and the ternary system of P105, water, and pentaoxyethylene dodecyl ether (C₁₂EO₅) has been studied to understand the miscibility of a small amphiphile, C₁₂EO₅ and a copolymer, as well as the mixing effect on the formed liquid crystalline structures. Phase diagrams, small angle x‐ray scattering (SAXS) and differential scanning calorimetry (DSC) were used to characterize these systems. The phase diagram of the binary system is presented together with the characteristic parameters for founded phases, namely, cubic, hexagonal, and lamellar phases. In the ternary system it was found that the small amphiphile and the block copolymer, despite having very different chain lengths are essentially miscible forming single phases. A large amount of C₁₂EO₅ can be solubilized in the P105 aggregates whereas P105 is most difficult to dissolve in the C₁₂EO₅ aggregates because of the difference in the molecular size. The copolymer is practically insoluble in the lamellar phase of C₁₂EO₅ due to the packing constraint. Hence, two lamellar phases coexist in a surfactant‐rich region, at W _s  = 0.66, where W _s is the weight fraction of the total amphiphile in the system. This indicates that the thickness of the lipophilic part of the C₁₂EO₅ lamellar phase is too small to allocate the large lipophilic chain of the P105 triblock copolymer.     

Kinetics of Reaction Bisphenol-S Epoxy Resin with Methylacrylic Acid

The reaction kinetics of bisphenol-S epoxy resin with methyl-acrylic acid in the presence of quaternary ammonium salt catalyst was studied. The reaction rate constants at different temperatures were determined. The reaction is first order with respect to epoxy group, zero order with respect to methylacrylic acid and 0.71 order with respect to quaternary ammonium salt catalyst, respectively. The mechanism of this reaction was discussed.     

IR Spectroscopic Study of Chemical Transformations upon Irradiation of the Poly(vinyl chloride)–Triallyl Cyanurate System

Chemical transformations resulting from irradiation of the poly(vinyl chloride) (PVC)–triallyl cyanurate (TAC) system were studied by IR spectroscopy. It was shown that crosslinking was accompanied by scission of the network structure formed in the initial dose range, and the scission process occurred even at small irradiation doses. The scission is assumed to be localized at the interface boundary between PVC and poly(iso-TAC) or poly(TAC).     

Rich‐Syndiotacticity of Poly(cyclohexyl methacrylate) Prepared by Modified Microemulsion Polymerization

Nanoscale poly(cyclohexyl methacrylate) (PCHMA) particles were prepared by a modified microemulsion polymerization procedure. ¹³C‐NMR analysis suggested that such PCHMA samples were higher in syndiotactic content (61–72% rr) and lower in isotactic content (1–3% mm). The glass transition temperatures (T_g's) of the products were also higher than that reported in the literature. The polymer properties, such as particle size, molecular weight, tacticity, and T_g were affected by the reaction conditions. The smaller the particle size, the higher the syndiotacticity, the lower the isotacticity and the greater the molecular weight, then the higher the T_g of the PCHMA samples. Possible mechanism of rich‐syndiotacticity was also discussed.     

Kinetics and Mechanism of Iridium(Ⅲ)-Catalyzed Oxidation of Ethanol Amine by Cerium(Ⅳ) in Sulfuric Acid Media

In this study, the kinetics and mechanism of the iridium(Ⅲ)-catalyzed oxidation of ethanol amine(EAN) by cerium(Ⅳ) in a sulfuric acid medium was investigated using titrimetric technique of redox in a temperature range of 298-313 K. It was found that the reaction is of first order with respect to Ce(Ⅳ) and Ir(Ⅲ), and a positive fractional order with respect to EAN. It was also found that the pseudo-first-order([EAN](》)[Ce(Ⅳ)]) rate constant kobs decreases with the increase of [H ] and [HSO-4]. Under the protection of nitrogen gas, the reaction system can initiate the polymerization of acrylonitrile, indicating the generation of free radicals. On the basis of the experimental results, a suitable mechanism was proposed. From the dependence of kobs on the concentration of hydrogen sulfate, Ce(SO4)2 was found to be the kinetically active species. The rate constants of the rate-determining step together with the activation parameters were evaluated.     

Cure Kinetics of DGEBA with Hyperbranched Poly （3-hydroxyphenyl） Phosphate as Curing Agent Studied by Non-isothermal DSC

IntroductionEpoxy resins are widely used in the fields of coa-tings,adhesives,insulating materials,etc..Diglycidylether of bisphenol A(DGEBA)is the most importantepoxy resin in industry because of its fluidity,physicaland mechanical properties after cure,…     

Synthesis, Characterization and Solution Properties of Hydrophobically Modified Polyelectrolyte Poly(AA-co-TMSPMA)

The hydrophobically modified polyelectrolyte was synthesized using precipitation polymerization of acrylic acid and 3-[tris(trimethylsilyloxy)silyl]propyl methacrylate (TMSPMA) in various molar ratios in supercritical carbon dioxide. FT-IR, ¹H NMR, capillary viscometry, rotational viscometer, transmission electron microscopy and fluorescence spectroscopy were used to characterize this copolymer. The viscosity of the copolymers showed a strong dependence on pH with a maximum at pH=5.5. Associating morphologies of the copolymer were observed by TEM. Associating morphologies of poly(AA-co-TMSPMA) solution changed from a global structure to a shell-core structure with increasing hydrophobic levels. A solution of sample PAT4 with a shell-core structure had the largest viscosity value. In addition, the critical micelle concentration of copolymer solution, cmc, was determined from the relative viscosity. The critical micelle concentration was further confirmed by fluorescence spectroscopy using 1-pyrenemethylamine hydrochloride, PyMeA⋅HCl, as a cationic fluorescent probe. The cmc was determined from the intensity ratios, the first to the third emission peaks I ₁/I ₃, and the excimer to monomer I _E/I _M ratio of the pyrene probe as a function of concentration.     

Synthesis and Characterization of Poly(hydrogen halide) Halogenates (–I)

Herein, we report the synthesis and characterization of a variety of novel poly(hydrogen halide) halogenates (−I). The bifluoride ion, which is known to have the highest hydrogen bond energy of ≈160 kJ mol⁻¹, is the most famous among many examples of [X(HX)_n]⁻ anions (X=F, Cl) known in the literature. In contrast, little is known about poly(hydrogen halide) halogenates containing two different halogens, ([X(HY)_n]⁻). In this work we present the synthesis of anions of the type [X(HY)_n]⁻ (X=Br, I, ClO₄; Y=Cl, Br, CN) stabilized by the [PPh₄]⁺ and [PPN]⁺ cation. The obtained compounds have been characterized by single-crystal X-ray diffraction, Raman spectroscopy and quantum-chemical calculations. In addition, the behavior of halide ions in hydrogen fluoride was investigated by using experimental and quantum-chemical methods in order to gain knowledge on the acidity of hydrogen halides in HF.     

Surface Properties of Polyacid–Poly(N-Vinyl Pyrrolidone) Complexes

The effect of the complexation of polyacrylic (PAA) and polymethacrylic (PMAA) acids with poly(N-vinyl pyrrolidone) (PVP) on their surface properties was studied by measuring surface tension, conductivity, and the viscosity of aqueous mixed polymer solutions, as well as by the potentiometric titration at 293.15 K. The values of relaxation times and the surface activity of polycomplexes were calculated from kinetic data and the surface tension isotherms of the solutions. The complexation was found to increase the surface layer relaxation time, surface activity, and the ability of the macromolecules to reduce the surface tension of solvent. The values of adsorption free energy were calculated for PVP and polycomplexes. They were equal to –22.0, –23.0, and –24.8 kJ/base-mole (per one mole of PVP monomer unit) for PVP and PMAA–PVP and PAA–PVP polycomplexes, respectively.     

Microwave Synthesis and Characterization of a Silver–Poly (Amide Amine) Dendrimer Nanocomposite with Application as a Hydrogen Peroxide Sensor

A novel procedure to fabricate a nonenzymatic hydrogen peroxide sensor was developed based on a silver-poly (amide amine) dendrimer nanocomposite synthesized by a microwave procedure. The formation of silver nanoparticles functionalized with the poly (amide amine) dendrimer was confirmed by ultraviolet visible spectroscopy, high resolution transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The electroanalytical properties of a glassy carbon electrode modified with the silver-poly (amide amine) dendrimer nanocomposite were evaluated by the determination of hydrogen peroxide. The electrochemical sensor exhibited rapid response and high sensitivity to hydrogen peroxide with a linear dynamic range from 1.0 × 10–5 to 3.7 × 10–3 molar (r = 0.998) and a limit of detection of 5.06 micromolar. The sensitivity was 30.24 microampere · per millilmolar per square centimeter and the response time was three seconds at a working potential of ?0.35 volt. In addition, the sensor was unaffected by the presence of ascorbic acid, citric acid, and oxalic acid. These results indicate that the silver-poly (amide amine) dendrimer nanocomposite based sensor has application for the determination of hydrogen peroxide.     

Kinetics of Proton Transfer from Octa(m-trifluoromethylphenyl)porphyrazine to Nitrogen-Containing Bases in the Benzene–Dimethylsulfoxide System

Russian Journal of Physical Chemistry A - The acid–base interaction between octa(m-trifluoromethylphenyl)porphyrazine and pyridine, 2‑methylpyridine, morpholine, and piperidine in the...     

Raman Spectroscopic Study of the Conformation and Melting of Poly(dG) · Poly(dC) and Poly(dG-dC) · Poly(dG-dC) in Aqueous Solution

Raman spectroscopic measurements on aqueous solutions of poly(dG) · poly(dC)indicate that the conformation of the polynucleotides in this double helicalcomplex are distributed between the A and B types at room temperature, the Aform being predominant at –15°C and decreasing progressively upon raising thetemperature to 65°C. A reversible pretransition has been found in this complexnear 70°C. Modifications in the spectra at this temperature indicate no majorconformational changes, but rather suggest altered base pairing and hydration ofthe carbonyl groups, accompanied by a slight distortion of the double helix,resulting in a slightly reduced stacking of the cytosine bases. Measurements inself-pressurized solutions of the complex at high temperature show that it meltsat 103°C in 0.1M NaCl solution (107°C in 0.5M NaCl). These values are somewhatlower than those we have determined in the same manner for the complexpoly(dG-dC) · poly(dG-dC): 117°C in 0.1M MgCl₂ and 113°C or higher in 0.1MNaCl solution.     

Electroredox Behavior of Novel Poly viol ogens Modified Electrodes

The electroredox behavior of novel modified electrodes coated with complexes of different polyviologens was investigated using cyclic voltammetry. The influences of compositions of electrolyte complex on the reversibility of the modified electrode and the electrochromic properties were studied also. It was found that all the ratios of integrated charges of cathodic to anodic scan (Qc/QA) are close to 1, which indicates that these modified electrodes have good reversible behavior. Repeated stepping over the first wave for 500 scans, the PSS-PX(p)V modified electrode showed excellent stability. The first reduction potential (E1), decrease of current height (Dec%), response time (tre tox) of various polyviologen modified electrodes were reported. In addition, the effect of the coverage of polyviologen on the electrode surface was also examined. The rate of electron transfer in this heterogeneous system is diffusion-controlled, consistent with the Conttrell equation.     

Studies on the Phase Separation of Poly(Ether Imide)‐Modified Cyanate Ester Resin

Abstract

A high temperature thermosetting bisphenol‐A dicyanate (BADCy) was blended with a novel thermoplastic poly(ether imide) (PEI) at various composition. The phase separation behavior during isothermal curing was studied by differential scanning calorimeter (DSC), time‐resolved light scattering (TRLS), scanning electron microscopy (SEM), and rheological measurements. The results suggested that the phase structure changed from separated phase, via co‐continuous phase, to phase inversion with the increase of the PEI content. The curing conversion of BADCy was slightly affected by the composition in the blend and the curing rate was decreased with the increase of PEI content. The co‐continuous phase morphology was attributed to a spinodal decomposition. The initial concentration of PEI had an effect on the rheological behavior during phase separation. It was found by tensile test that the blend with 15 wt.% PEI had higher tensile strength and elongation at break than that without PEI.