Synthesis and surface properties of a new fluorinated acrylic diblock copolymer via AGET ATRP

A series of fluorinated diblock copolymers poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)-b-poly(glycidyl methacrylate) PHFMA-b-PGMA with different fluorine content were synthesized by activator generated by electron transfer atom transfer radical polymerization (AGET ATRP). FTIR, ¹H NMR and GPC data verified feasibility and controllability of the synthesis. In order to evaluate the effect of chain structure on the surface properties, corresponding homopolymer poly(2,2,3,4,4,4-hexafluorobutyl methacrylate) and random copolymer copoly(2,2,3,4,4,4-hexafluorobutyl methacrylate-r-glycidyl methacrylate) were also comparatively studied. Contact angle measurements indicated that the water and ethyleneglycol contact angles of block- and random copolymers increased with increase of fluorine content, but in different manner. This difference comes from different surface energy at the same fluorine content on film surface. The surface stability of block-copolymer was obviously better than that of random copolymer; the same results were observed in heat resistance tests.     

Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP

A new fluorinated macroinitiator of poly 2,2,3,4,4,4-hexafluorobutyl methacrylate-Br (PHFMA-Br) was prepared via activator generated by electron transfer atom transfer radical polymerization (AGET ATRP), and then a series of fluorinated block copolymers with different fluorine content were successfully synthesized from the macroinitiator by the second step AGET ATRP. GPC, FTIR and ¹H NMR data obtained verified the synthesis. Contact angle measurement indicated that proper fluorine content could decrease the surface energy and increase the contact angle of the copolymer films. XPS characterization showed that the large difference in surface energy between the block and random copolymer film resulted from the difference of the fluorine content on the surface, although the fluorine content of the two copolymers in bulk was similar. The self-assembly behavior of the fluorinated block copolymer in selective solvents was evaluated by the TEM study, and the stable micelles with a core-shell structure were observed when the copolymer content was about 1 wt%.     

两亲性RAFT试剂存在下丙烯酸六氟丁醋和苯乙烯的无皂乳液聚合

合成了具有两亲性结构的可逆加成断裂链转移(RAFT)试剂,在RAFT试剂的作用下,通过无皂乳液聚合方法合成了丙烯酸六氟丁酯与苯乙烯的共聚物.研究了RAFT试剂浓度和聚合温度对聚合动力学、聚合反应可控性及乳胶粒粒径的影响.通过红外光谱(FTIR)、核磁共振谱(1H NMR)、示差扫描量热仪(DSC)、凝胶渗透色谱仪(GPC)及表面张力仪表征了共聚物的结构、玻璃化转变温度(Tg)、分子量和分子量分布及乳胶膜表面性能.结果表明,得到的苯乙烯和丙烯酸六氟丁酯共聚物无皂乳液的乳胶粒粒径在100 nm左右且呈单分散分布.当RAFT试剂浓度高于0.016 mol/L时聚合体系有较好的可控性.共聚物乳液的乳胶膜对水和二碘甲烷的接触角都很高.     

化学酶法合成五嵌段聚合物及其自组装行为的研究

用酶促开环聚合与ATRP方法相结合,制备了聚甲基丙烯酸六氟丁酯-聚己内酯-聚乙二醇-聚己内酯-聚甲基丙烯酸六氟丁酯(PHFMA-b-PCL-b-PEG-b-PCL-b-PHFMA)五嵌段聚合物.首先用Novozym e 435作为催化剂合成了聚己内酯-聚乙二醇-聚己内酯三嵌段聚合物,然后通过端基官能化法合成了大分子引发剂,并用其引发甲基丙烯酸六氟丁酯(HFMA)的ATRP反应,合成了五嵌段聚合物.通过核磁和GPC证明了大分子引发剂和五嵌段共聚物的结构,五嵌段共聚物的GPC分析表明这种合成方法的可行.共聚物胶束的直径和大小通过动态光散射方法和原子力显微镜测试,五嵌段共聚物在水中的的自组装行为也被研究.结果证明胶束是球形,其平均直径为77 nm.聚合物在四氢呋喃中的浓度对聚合物的聚集形貌有很大的影响.     

Synthesis and Properties of Cationic Fluorinated Polyacrylate Soap-Free Latex

Cationic fluorinated polyacrylate soap-free latex (CFMBD) was synthesized by semi-continuous seeded emulsion polymerization of dodecafluoroheptyl methacrylate (DFMA), methyl methacrylate (MMA), butyl acrylate (BA), and dimethylaminoethyl methacrylate (DM) with a novel cationic polymerizable emulsifier, maleic acid double ester-octadecyl poly(ethyleneoxy)₂₀ ether-ethylene trimethyl ammonium chloride (R303), and 2,2′- azobis (2 - methylpropionamidine) dihydrochloride (VA-50) was utilized as the initiator. Effects of some factors, such as VA-50 amount, R303 amount and DFMA amount, on stability and average particle size of the CFMBD were discussed in detail, and the optimal polymerization condition was obtained. In addition, the emulsion and its film were characterized by Fourier transform infrared (FTIR) spectrometry, thermogravimetry analysis (TGA), contact angle goniometer, X-ray photoelectron spectroscopy (XPS), respectively. FTIR confirmed the structure of the CFMBD. With the increasing of DFMA amount, water absorption of the film decreased and water contact angle of the film increased. While the DFMA amount was more than 6 g in the recipe, the water contact angle (107.5°) and the water absorption (7.8 wt%) of the film showed no more changes. Meanwhile, thermal stability of the copolymer was greatly improved with the increasing of DFMA amount. XPS analysis indicated the fluoroalkyl groups had the tendency to enrich at the film-air interface.     

阴离子型含氟两亲接枝共聚物的合成及其胶束化行为研究

以聚乙二醇甲醚甲基丙烯酸酯(MPEGMA)为大分子单体,甲基丙烯酸六氟丁酯(HFMA)、对苯乙烯磺酸钠(NaSS)为共聚单体,采用大分子单体接枝共聚法,制备了一种阴离子型含氟两亲接枝共聚物P( HFMA-co-NaSS) -g-PEG.利用FTIR、1H-NMR和19F-NMR对共聚物的分子结构进行了表征.表面张力法测...     

Preparation of functional polymers by living anionic polymerization: Polymerization of allyl methacrylate

The anionic polymerization of allyl methacrylate was carried out in tetrahydrofuran, both in the presence and in the absence of LiCl, with a variety of initiators, at various temperatures. It was found that (1,1-diphenylhexyl)lithium and the living oligomers of methyl methacrylate and tert-butyl methacrylate are suitable initiators for the anionic polymerization of this monomer. The temperature should be below −30°C, even in the presence of LiCl, for the living polymerization to occur. When the polymerization proceeded at −60°C, in the presence of LiCl, with (1,1-diphenylhexyl)-lithium as initiator, the number-average molecular weight of the polymer was directly proportional to the monomer conversion and monodisperse poly(allyl methacrylate)s with high molecular weights were obtained. ¹H-NMR and FT-IR indicated that the α CC double bond of the monomer was selectively polymerized and that the allyl group remained unreacted. The prepared poly(allyl methacrylate) is a functional polymer since it contains a reactive CC double bond on each repeating unit. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2901–2906, 1997     

SYNTHESIS OF AN AMPHIPHILIC PPESK-g-P(PEGMA) GRAFT COPOLYMER VIA ATRP AND ITS USE IN BLEND MODIFICATION OF PPESK MEMBRANES

Preparation of an amphiphilic graft copolymer having poly(phthalazinone ether sulfone ketone)(PPESK) as main chains was carried out by atom transfer radical polymerization(ATRP).The precursor,chloromethylated PPESK (CMPPESK),was prepared by using chioromethylether as chloromethylation agent.Then,poly(ethylene glycol) methyl ether methacrylate(PEGMA) was used as monomer to synthesize PPESK-g-P(PEGMA) by ATRP method under the catalysis of a cuprous chloride/2,2'-bipyridyl system.PPESK/PPESK-g-P(PEGMA) blen...     

Preparation of Fluorine-Containing Polyacrylate Emulsion by a UV-initiated Polymerization

A fluorine-containing polyacrylate emulsion was synthesized by a UV-initiated emulsion polymerization from methyl methacrylate (MMA) and hexafluorobutly methacrylate (HFMA) in the presence of 2-hydroxy-4-(2-hydroxyethoxy)-2-methyl-propiophenone (Irgacure 2959) as a hydrophilic photoinitiator at room temperature. The latex and films were characterized by Fourier transformed infrared (FT-IR) spectrometry, nuclear magnetic resonance (¹H-NMR, ¹⁹F-NMR) spectrometry, transmission electron microscopy (TEM), recycling gel permeation chromatography (GPC), dynamic light scattering (DLS), and contact angle (CA) analysis, respectively. The effects of photoinitiator and emulsifier concentration on the polymerization were discussed. Compared to the corresponding thermal polymerization, UV-initiated polymerization of the MMA/HFMA emulsion could be accomplished at a much higher speed. The polymerization conversion in UV-initiated polymerization reached 95% within 10 min at an emulsifier concentration of 0.6 wt%, photoinitiator concentration of 0.4 wt%, and monomer concentration of 10 wt%.     

Hydrophilic modification of poly(vinylidene fluoride) (PVDF) by in situ polymerization of methyl methacrylate (MMA) monomer

The hydrophilicity of poly(vinylidene fluoride) (PVDF) was first improved by in situ polymerization of polar monomer in PVDF solution. Methyl methacrylate was adopted as the reaction monomer, and the polymerization occurred in a solution of PVDF in N,N-dimethylformamide. PVDF/poly(methyl methacrylate) (PMMA) blend was obtained after in situ polymerization. The relative hydrophilicity of the in situ blend was characterized by contact angle measurement. At the same time, the hydrophilicity of the PVDF/PMMA blends prepared by solution blending was compared with that of the in situ blend. The contact angle measurements indicated that in situ polymerization has a stronger modifying effect on the hydrophilicity of PVDF than solution blending.     

Latices of poly(fluoroalkyl mathacrylate)‐b‐poly(butyl methacrylate) copolymers prepared via reversible addition–fragmentation chain transfer polymerization

Poly(fluoroalkyl mathacrylate)‐block‐poly(butyl methacrylate) diblock copolymer latices were synthesized by a two‐step process. In the first step, a homopolymer end‐capped with a dithiobenzoyl group [poly(fluoroalkyl mathacrylate) (PFAMA) or poly(butyl methacrylate) (PBMA)] was prepared in bulk via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐cyanoprop‐2‐yl dithiobenzoate as a RAFT agent. In the second step, the homopolymer chain‐transfer agent (macro‐CTA) was dissolved in the second monomer, mixed with a water phase containing a surfactant, and then ultrasonicated to form a miniemulsion. Subsequently, the RAFT‐mediated miniemulsion polymerization of the second monomer (butyl methacrylate or fluoroalkyl mathacrylate) was carried out in the presence of the first block macro‐CTA. The influence of the polymerization sequence of the two kinds of monomers on the colloidal stability and molecular weight distribution was investigated. Gel permeation chromatography analyses and particle size results indicated that using the PFAMA macro‐CTA as the first block was better than using the PBMA RAFT agent with respect to the colloidal stability and the narrow molecular weight distribution of the F‐copolymer latices. The F‐copolymers were characterized with ¹H NMR, ¹⁹F NMR, and Fourier transform infrared spectroscopy. Comparing the contact angle of a water droplet on a thin film formed by the fluorinated copolymer with that of PBMA, we found that for the diblock copolymers containing a fluorinated block, the surface energy decreased greatly, and the hydrophobicity increased. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 471–484, 2007     

The role of 1-octyl-3-methylimidazolium hexafluorophosphate in anticorrosion coating formula development

A hydrophobic ionic liquid (1-octyl-3-methylimidazolium hexafluorophosphate, C₈mimPF₆) with a function of inhibiting corrosion was encapsulated at different concentrations in the copolymer of poly (methyl methacrylate) and poly (butyl acrylate) through miniemulsion polymerization. These latexes were coated on steel samples whose corrosion properties were evaluated by electrochemical techniques. It was found that increasing the C₈mimPF₆ concentration from 0 wt% to 30 wt%, the corrosion inhibition efficiency was remarkably improved from 41% to 89% based on the charge transfer resistance and from 64% to 87% based on the corrosion current density, respectively. The ionic liquid did not attend the reaction during latex preparation but behaved as corrosion inhibitors on the steel surface. Such an anticorrosion effect could be ascribed to the physical adsorption of the C₈mim⁺ cation on the reaction sites and the hydrophobicity enhancement resulting from the hydrophobic PF₆^? anion.     

PSF-g-P(PEGMA)的合成及其共混超滤膜的制备与性能研究

以氯甲基化双酚A型聚砜(PSF-CH2Cl)为大分子引发剂,通过原子转移自由基聚合(ATRP)法合成了以聚砜(PSF)为疏水主链、聚(聚乙二醇单甲醚甲基丙烯酸酯)[P(PEGMA)]为亲水侧链的梳状两亲性共聚物PSF-g-P(PEGMA).FT-IR和1H-NMR的表征结果证实了两亲性共聚物的生成.将PSF-g-P(PEGMA)与PSF进行共混,通过浸没沉淀法制备了共混超滤膜.研究发现,引入5 wt%的PSF-g-P(PEGMA),共混膜的孔隙率和平均孔径分别从65.9%和0.08μm提高到81.9%和0.18μm;将共混膜于90℃热水中浸泡24 h后,膜表面O/S从14.63提高到17.16;共混膜的亲水性和抗牛血清蛋白(BSA)吸附性能显著提升.     

Well‐defined poly[(dimethylamimo)ethyl methacrylate]‐b‐poly(fluoroalkyl methacrylate) diblock copolymers: Effects of different fluoroalkyl groups on the solution properties

A series of well‐defined, fluorinated diblock copolymers, poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(2,2,2‐trifluoroethyl methacrylate) (PDMA‐b‐PTFMA), poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(2,2,3,4,4,4‐hexafluorobutyl methacrylate) (PDMA‐b‐PHFMA), and poly[2‐(dimethylamino)ethyl methacrylate]‐b‐poly(2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate) (PDMA‐b‐POFMA), have been synthesized successfully via oxyanion‐initiated polymerization. Potassium benzyl alcoholate (BzO^?K⁺) was used to initiate DMA monomer to yield the first block PDMA. If not quenched, the first living chain could be subsequently used to initiate a feed F‐monomer (such as TFMA, HFMA, or OFMA) to produce diblock copolymers containing different poly(fluoroalkyl methacrylate) moieties. The composition and chemical structure of these fluorinated copolymers were confirmed by ¹H NMR, ¹⁹F NMR spectroscopy, and gel permeation chromatography (GPC) techniques. The solution behaviors of these copolymers containing (tri‐, hexa‐, or octa‐ F‐atom)FMA were investigated by the measurements of surface tension, dynamic light scattering (DLS), and UV spectrophotometer. The results indicate that these fluorinated copolymers possess relatively high surface activity, especially at neutral media. Moreover, the DLS and UV measurements showed that these fluorinated diblock copolymers possess distinct pH/temperature‐responsive properties, depending not only on the PDMA segment but also on the fluoroalkyl structure of the FMA units. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2702–2712, 2009     

Emulsion copolymerization of fluorinated acrylate in the presence of a polymerizable emulsifier

An emulsifier-free fluorinated polyarcylate emulsion was synthesized by a seed emulsion polymerization method from methyl methacrylate (MMA), butyl acrylate (BA) and hexafluorobutyl methacrylate (HFMA) in the presence of a polymerizable emulsifier—ammonium allyloxtmethylate nonylphenol ethoxylates sulfate (DNS-86). Influences of the DNS-86 level on electrolyte stability of the emulsifier-free emulsion were discussed. In addition, the emulsion and the films were characterized by Fourier transformed infrared (FT-IR) spectrometry, nuclear magnetic resonance (¹H NMR) spectrometry, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), differential scanning calorimetry (DSC), thermogravimetry (TG), and contact angle (CA) analysis, respectively. The FT-IR spectra and ¹H NMR spectrum showed that HFMA was effectively involved in the emulsion copolymerization and monomers formed the fluorine-containing acrylate copolymer. The resulted emulsion particles had a core–shell structure and a narrow particle size distribution. XPS and CA analysis revealed that a gradient concentration of fluorine existed along the depth profile of the fluorine-containing emulsion film. One side of the film was richer in fluorine and more hydrophobic than the other side. The film formed from the fluorine-containing emulsion showed higher thermal stability than that of the fluorine-free emulsion.     

A novel block copolymer with excellent amphiphobicity synthesized via ARGET ATRP

The poly(methyl methacrylate)‐b‐poly(2‐[[[[2‐(perfluorohexyl)]‐sulfonyl]‐amino]ehthyl] methacrylate) (PMMA‐b‐PC₆SMA) copolymers were successfully synthesized for the first time using activator regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) method. Under optimized reaction conditions, the degree of polymerization (DP) of resulting copolymers increased approximately linearly with monomer conversion. Structures of a well‐defined block copolymer were determined by GPC, FT–IR, and ¹H‐NMR spectra. Results from AFM and contact angle measurements of polymer films revealed the presence of block segments derived from PC₆SMA, as indicated by the obvious increase in hydrophobicity and oleophobicity. The relationship between surface composition and surface wetting ability was confirmed by XPS and AFM spectra. Compared with the random copolymer PMMA‐co‐PC₆SMA, C₆SMA dosages in the PMMA‐b‐PC₆SMA copolymers were greatly decreased, which retained its hydrophobic and oleophobic properties. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2040–2049     

Synthesis of amphiphilic poly(methyl methacrylate‐ b‐ethylene oxide) copolymers from monohydroxy telechelic poly(methyl methacrylate) as macroinitiator

The synthesis of well‐defined poly(methyl methacrylate)‐block‐poly(ethylene oxide) (PMMA‐b‐PEO) dibock copolymer through anionic polymerization using monohydroxy telechelic PMMA as macroinitiator is described. Living anionic polymerization of methyl methacrylate was performed using initiators derived from the adduct of diphenylethylene and a suitable alkyllithium, either of which contains a hydroxyl group protected with tert‐butyldimethylsilyl moiety in tetrahydrofuran (THF) at ?78 °C in the presence of LiClO₄. The synthesized telechelic PMMAs had good control of molecular weight with narrow molecular weight distribution (MWD). The ¹H NMR and MALDI‐TOF MS analysis confirmed quantitative functionalization of chain‐ends. Block copolymerization of ethylene oxide was carried out using the terminal hydroxyl group of PMMA as initiator in the presence of potassium counter ion in THF at 35 °C. The PMMA‐b‐PEO diblock copolymers had moderate control of molecular weight with narrow MWD. The ¹H NMR results confirm the absence of trans‐esterification reaction of propagating PEO anions onto the ester pendants of PMMA. The micellation behavior of PMMA‐b‐PEO diblock copolymer was examined in water using ¹H NMR and dynamic light scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2132–2144, 2008     

Synthesis and Characterization of Poly(methyl methacrylate)-b-Polystyrene/TiO2 Nanocomposites Via Reversible Addition-Fragmentation Chain Transfer Polymerization

A diblock copolymer, poly(methyl methacrylate)-b-polystyrene (PMMA-b-PS), was grafted onto the surface of nano-titania (nano-TiO₂) successfully via reversible addition-fragmentation chain transfer (RAFT) polymerization. The surface of TiO₂ nanoparticles was modified initially by attaching dithioester groups to the surface using silane coupling agent 3-(chloropropyl)triethoxy silane and sodium ethyl xanthate. The polymerization of methyl methacrylate and styrene were then initiated and propagated on the TiO₂ surface by RAFT polymerization. The resulting composite nanoparticles were characterized by means of XPS, FT-IR, ¹H NMR and TGA. The results confirmed the successful grafting of poly(methyl methacrylate) (PMMA) and diblock copolymer chains onto the surface of TiO₂. The amount of PMMA grafted onto the TiO₂ surface increased with the polymerization time. Moreover, the kinetic studies revealed that the ln([M]₀/[M]), where [M]₀ is the initial and [M] is the time dependent monomer concentrations, increased linearly with the polymerization time, indicating the living characteristics of the RAFT polymerization.     

Homopolymer and block copolymer brushes on gold by living anionic surface‐initiated polymerization in a polar solvent

Living anionic surface‐initiated polymerization on flat gold substrates has been conducted to create uniform homopolymer and diblock copolymer brushes. A 1,1‐diphenylethylene (DPE) self‐assembled monolayer was used as the immobilized precursor initiator. n‐BuLi was used to activate the DPE in tetrahydrofuran at –78 °C to initiate the polymerization of different monomers (styrene, isoprene, ethylene oxide, and methyl methacrylate). Poly(styrene) (PS) and poly(ethylene oxide) (PEO) in particular were first investigated as grafted homopolymers, followed by their copolymers, including poly(isoprene)‐b‐poly(methylmethacrylate) (PI‐b‐PMMA). A combined approach of spectroscopic (Fourier transform infrared spectroscopy, surface plasmon spectroscopy, ellipsometry, X‐ray photoelectron spectroscopy) and microscopic (atomic force microscopy) surface analysis was used to investigate the formation of the polymer brushes in polar solvent media. The chemical nature of the outermost layer of these brushes was studied by water contact angle measurements. The effect of the experimental conditions (solvent, temperature, initiator concentration) on the surface properties of the polymer brushes was also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 769–782, 2006     

ATRP法合成弹性蛋白接枝共聚物及其性能研究

弹性蛋白经α-溴异丁酰溴化制备了大分子ATRP引发剂溴化弹性蛋白(E-Br), 再以E-Br作为引发剂, 在CuCl/2,2-联吡啶催化体系下, 用原子转移自由基聚合方法合成了弹性蛋白-g-聚甲基丙烯酸-β-羟乙酯接枝聚合物. 用红外光谱(FTIR)、X射线光电子能谱(XPS)、热重分析(TGA)、扫描电镜(SEM)、离子色谱和动态接触角对接枝聚合物进行了表征. 结果表明, PHEMA键接到了弹性蛋白表面; SEM显示接枝改性后弹性蛋白的表面比未改性前光滑, 但改性后样品的热性能均比未改性样品的低, 起始热分解温度由改性前的307 ℃变为265 ℃; 动态接触角实验结果表明, 接枝改性后的样品具有良好的亲水性, 反应72 h后, 其前进角由接枝前的130.45°下降到29.80°.