Influence of chemical composition and sequence length on the transport properties of proton exchange membranes

One of the integral parts of the fuel cell is the proton exchange membrane. Our research group has been engaged in the past few years in the synthesis of several sulfonated poly(arylene ether) random copolymers. The copolymers were varied in both the bisphenol structure as well as in the functional groups in the backbone such as sulfone and ketones. To compare the effect of sequence length, multiblock copolymers based on poly(arylene ether sulfone)s were synthesized. This paper aims to describe our investigation of the effect of chemical composition, morphology, and ion exchange capacity (IEC) on the transport properties of proton conducting membranes. The key properties examined were proton conductivity, methanol permeability, and water self diffusion coefficient in the membranes. It was observed that under fully hydrated conditions, proton conductivity for both random and block copolymers was a function of IEC and water uptake. However, under partially hydrated conditions, the block copolymers showed improved proton conductivity over the random copolymers. The proton conductivity for the block copolymer series was found to increase with increasing block lengths under partially hydrated conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2226–2239, 2006     

Unusual "amphiphilic" association of hydrated protons in strong acid solution

The solvation structure of the hydrated excess proton in concentrated aqueous HCl solution is studied using the self-consistent iterative multi-state empirical valence bond method. At 0.43-0.85 M concentrations, hydronium cations are found to form unusual cation pairs. This behavior is consistent with our earlier finding that hydronium cations can have an "amphiphilic" character due in part to the asymmetric nature of their hydrogen bonding to nearby water molecules. The existence of these hydronium amphiphilic pairs is further supported by a Car-Parrinello ab initio molecular dynamics simulation at 1.0 M HCl concentration. It is also found that the hydronium cation pairs are stabilized by a delocalization of the hydrated excess proton charge defects involving additional water molecules. At the higher concentrations of 1.68 and 3.26 M, the abundance of such hydronium pairs decreases, and the analysis of the radial distribution functions indicates the possible formation of an aggregate structure with longer-ranged order.     

Comparative effect of phthalazinone units in sulfonated poly(arylene ether ether ketone ketone) copolymers as proton exchange membrane materials

A new series of aromatic poly(arylene ether ether ketone ketone) copolymers containing pendant sulfonic acid groups (SPAEEKK‐D) were synthesized from commercially available monomers 1,3‐bis(4‐fluorobenzoyl)‐benzene, sodium 6,7‐dihydroxy‐2‐naphthalenesulfonate, and 4‐(4‐hydroxyphenyl)‐2,3‐phthalazin‐1‐one (DHPZ). Structure–property relationships of the phthalazinone SPAEEKK‐D series poly(arylene ether ether ketone ketone) copolymer were compared with copolymers SPAEEKK‐B and SPAEEKK‐H containing different diols such as 4,4′‐biphenol and hydroquinone, respectively, prepared in our earlier work. Ion exchange capacity (IEC_w, weight‐based; IEC_v, volume‐based), thermal stabilities, swelling, proton and methanol transport properties of the membranes were investigated in relation to their structures and compared with those of perfluorinated ionomer (Nafion 117). The SPAEEKK‐D membrane incorporating the phthalazinone monomer DHPZ showed relatively lower water uptake and methanol permeability compared with earlier SPAEEKK‐B and SPAEEKK‐H membranes incorporating biphenol and hydroquinone monomers, respectively. Inclusion of phthalazinone in the SPAEEKK‐D copolymers led to lower water absorption, enabling increased proton exchange concentrations in the hydrated polymer matrix that resulted in more desirable membrane properties for future direct methanol fuel cell applications. The SPAEEKK‐D membranes also showed improved mechanical and thermal properties and oxidative stability compared with the earlier SPAEEKK‐B and ‐H membranes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 989–1002, 2008     

The relation of solvent heats of mixing to the enthalpies of proton transfer of some amines in methanol-water mixtures

Enthalpies of reaction for proton transfer in methanol-water mixtures are related to the enthalpies of mixing of methanol and water. The data are direct calorimetric measurements of the standard enthalpies of proton transfer in methanol-water mixtures of varying composition using the bases quinuclidine triethylamine, and tris(hydroxymethyl)aminomethane. Other possible applications of the principle are mentioned.decreased     

Ab initio and NMR studies on the effect of hydration on the chemical shift of hydroxy protons in carbohydrates using disaccharides and water/methanol/ethers as model systems

Density functional theory (DFT) and Hartree-Fock (HF) quantum mechanical calculations have been performed on the disaccharides, [small beta]-l-Fucp-(1[rightward arrow]4)-[small alpha]-d-Galp-OMe, [small beta]-l-Fucp-(1[rightward arrow]4)-[small alpha]-d-Glcp-OMe, and [small beta]-l-Fucp-(1[rightward arrow]3)-[small alpha]-d-Glcp-OMe. The [capital Delta][small delta]-values (difference between the chemical shift in the disaccharide and the corresponding monosaccharide methyl glycoside) for the exchangeable hydroxy protons have been calculated and compared to experimental values previously measured by NMR spectroscopy for samples in aqueous solutions. The calculations performed on molecules in vacuum showed that hydroxy protons hydrogen bonded to the neighboring ring oxygens have large positive [capital Delta][small delta]-values, indicating that they are deshielded relative to those in the corresponding methyl glycoside. The NMR experiments showed instead that these hydroxy protons close to the neighboring ring oxygens were shielded. This discrepancy between calculated and experimental data was attributed to solvent effects, and this hypothesis has been confirmed in this work by monitoring the chemical shift of the hydroxy proton of methanol in water, ethers and water/ether solutions. Shielding of the hydroxy proton of methanol is observed for increased ether concentrations, whereas deshielding is observed for increased concentration of water. The shielding observed for hydroxy protons in disaccharides is a consequence of reduced hydration due to intermolecular hydrogen bonding or steric effects. In strongly hydrated systems such as carbohydrates, the hydration state of a hydroxy proton is the key factor determining the value of the chemical shift of its NMR signal, and the [capital Delta][small delta] will be a direct measure of the change in hydration state.     

Synthesis and characterization of sulfonated naphthalenic polyimides based on 4,4′-diaminodiphenylether-2,2′-disulfonic acid and bis[4-(4-aminophenoxy)phenylhexafluoropropane] for fuel cell applications

The paper describes the synthesis and characterization of sulfonated polyimides based on 1,4,5,8-naphthalene tetracarboxylic dianhydride (NTDA), 4,4′-diaminodiphenylether-2,2′-disulfonic acid (ODADS) and (bis[4-(4-aminophenoxy)phenylhexafluoropropane] (BDAF)). Several copolymer samples were prepared by varying the molar ratio of ODADS: BDAF (0.5:1.50, 0.75:1.25, 1:1 and 1.50: 0.5) in the initial monomer feed. Structural characterization of the copolymers was done using FT-IR and ¹H NMR. ¹H NMR was also used to calculate the copolymer composition. Thermal characterization was done using thermogravimertry and dynamic mechanical analysis. Polymer films were prepared by solution casting using m-cresol as solvent. The membranes thus prepared were characterized for water uptake, water stability, methanol permeability and proton conductivity. The obtained sulfonated polyimides (SPI’s) had proton conductivities in the range of 0.137-3.94 mS/cm. SPI’s with 50% degree of sulfonation had proton conductivity comparable to that of Nafion with methanol permeability lower than that of Nafion. It was found that the degree of sulfonation of polyimide had a large effect on the thermal stability, water uptake, ion-exchange capacity and proton conductivity.     

Reactivity of anatase TiO(2) nanoparticles: the role of the minority (001) surface

Methanol adsorption on clean and hydrated anatase TiO(2)(001)-1 x 1 is studied using density functional theory calculations and first principles molecular dynamics simulations. It is found that (i) dissociative adsorption is favored on clean TiO(2)(001) at both low and high methanol coverages; (ii) on the partially hydrated surface, methanol dissociation is not affected by the coadsorbed water and can still occur very easily; (iii) the dissociative adsorption energy of methanol is always larger than that of water under similar conditions. This implies that water replacement by methanol is energetically favored, in agreement with recent experimental observations on colloidal anatase nanoparticles.     

The role of proton donors in SmI2-mediated ketone reduction: new mechanistic insights

The effects of proton donors (alcohols and water) on the rate of reduction of acetophenone by SmI2 have been examined utilizing stopped-flow spectrophotometric studies. The rate orders with respect to proton source and the kinetic isotope effects were determined as well. The reaction was first-order in phenol, 2,2,2-trifluoroethanol, methanol, and ethanol and zero-order in 2-propanol and 2-methyl-2-propanol when 25 equiv of proton source were used in the reduction. Methanol, ethanol, 2,2,2-trifluoroethanol, and phenol also showed a direct correlation between the pKa of the alcohol and the rate of reduction. Under the same conditions, water had a fractional rate order of 1.4. Further studies showed that water has a rate order of 1 at lower concentrations (<8 equiv) and a rate order of 2 at higher concentrations (>80 equiv). These results clearly indicate that the nature of the proton donor and its concentration affects the rates of reduction. Water has a high affinity for SmI2 (compared to that of the alcohols), and the onset of coordination at relatively low concentrations channels the reaction through a mechanistically distinct pathway.     

IR investigation of hydrogen bonds in weakly hydrated films of poly(vinyl alcohol)

A system of hydrogen bonds in weakly hydrated PVA films containing up to ≤8.5 wt % water is investigated via IR spectroscopy. It is shown that water molecules bind to only part of the hydroxyl groups of the polymer that are available for hydration and form the first hydrating layer. In a completely dehydrated film, practically every hydroxyl group of PVA forms hydrogen bonds with two other hydroxyl groups and serves as both a proton donor and a proton acceptor. In the hydrated film, one to three water molecules directly bind with one hydroxyl group of PVA.     

Effect of Sulfonation Degree on Performance of Proton Exchange Membranes for Direct Methanol Fuel Cells

A series of proton exchange membranes based on sulfonated polyarylene ether ketones(SPAEKs) was used to study the effect of sulfonation degree on proton conductivity, methanol permeation and performance of direct methanol fuel cells(DMFCs). Dependences of physical characteristics of the membranes, i. e., proton conductivity, water uptake, swelling ratio, methanol permeability and ion exchange capacity(IEC) were systematically studied. Both methanol permeability and proton conductivity of the SPAEK membrane grow rapidly as the increase in sulfonation degree since methanol molecules and protons share the same transfer channel. However,the methanol permeability plays more important role comparing to proton conductivity. As a result, the SPAEK membrane with a medium sulfonation degree(60%) was found to yield the best performance in a DMFC due to the acquirement of balanced conductivity and methanol permeability.     

Parallel proton transfer pathways in aqueous acid-base reactions

We study the mechanism of proton transfer (PT) between the photoacid 8-hydroxy-1,3, 6-pyrenetrisulfonic acid (HPTS) and the base chloroacetate in aqueous solution. We investigate both proton and deuteron transfer reactions in solutions with base concentrations ranging from 0.25 M to 4 M. Using femtosecond midinfrared spectroscopy, we probe the vibrational responses of HPTS, its conjugate photobase, the hydrated proton/deuteron, and chloroacetate. The measurement of these four resonances allows us to follow the sequence of proton departure from the acid, its uptake by the water solvent, and its arrival at the base. In recent studies it was shown that proton transfer to carboxylate bases proceeds via Grotthuss conduction through a water wire connecting the acid and the base [Mohammed et al., Science 310, 83 (2005);Agnew. Chem. Int. Ed. 46, 1458 (2007);Siwick and Bakker, J. Am. Chem. Soc. 129, 13412 (2007); J. Phys. Chem. B 112, 378 (2008)]. Here we show that, for the weaker base chloroacetate, an alternative channel for proton transfer arises. In this channel the proton is first transferred to the water solvent and only later taken up from the water by the base. We study the base concentration dependence of the two competing channels.     

Orientational dynamics of water in the nafion polymer electrolyte membrane and its relationship to proton transport

Orientational anisotropies are calculated from molecular dynamics simulations of bulk water and the Na(+) and H(+) forms of hydrated Nafion and then compared with corresponding experimental values. The extended jump model of Laage and Hynes is applied to water reorientations for each system, and the anisotropies are explored as a product of hydrogen bond restricted "wobble-in-a-cone" reorientations and that due to the discrete jumps of hydrogen bond reorganization. Additionally, the timescales of hydrogen bond switching and proton transport are presented for bulk water and the H(+) form of hydrated Nafion. The short time scale of proton hopping is found to be independent of Nafion water loading, suggesting the short time dynamics of proton hopping are relatively insensitive to the level of hydration. Furthermore, the long time decay for the forward rate of hydrogen bond switching is shown to be identical to the long time decay in the forward rate of proton hopping, for bulk water and all water loadings of Nafion investigated, suggesting a unified process.     

对浸入水或甲醇中的石墨氧化物的理论研究

采用密度泛函理论优化了含水和不含水的石墨氧化物的多种结构．当层间没有水分子时,优化的层间距在6A左右,小于6．5—7A的实验值．反之,含水石墨氧化物的层间距和实验值符合很好．基于优化的石墨氧化物结构,用分子动力学方法模拟了水或甲醇中的石墨氧化物．对于不含水的石墨氧化物,水和甲醇分子不进入其层间．而对于含水的石墨氧化物,液体分子进入层间,增大了层间距,半定量地重复了实验现象．     

Perfluorobutane sulfonic acid hydration and interactions with O2 adsorbed on Pt3

The side chain of NAFION, a proton conductive membrane used as electrolyte in low-temperature fuel cells, is modeled with perfluorobutane sulfonic acid. Density functional theory is used to characterize structures and energetics of hydration of the model system interacting with a proton solvated with up to 24 water molecules and analyze interactions of some of these hydrated complexes with O(2) adsorbed on Pt(3). It is found that at least three water molecules are needed to ionize the sulfonic acid, and higher degrees of hydration induce the formation of cages where the water molecules are held together via complex hydrogen-bond networks. The interaction between the complex formed by the ionized acid and the hydrated proton, in contact with a bridge-adsorbed O(2)-Pt(3), promotes the protonation of the adsorbed O(2). Upon protonation, the O(2)-Pt(3) system evolves from hydrophobic to hydrophilic behavior, which may facilitate further interfacial contact.     

Proton exchange in hybrid sulfonated poly(ether ether ketone)–silica membranes by H solid-state NMR

Enthalpy of activation for proton exchange processes in fully hydrated hybrid sulfonated poly(ether ether ketone)–silica (SPEEK/SiO₂) membranes were measured from the ¹H NMR spectra under magic angle sample spinning (MAS). For the first time Eyring function is used for this purpose. Two exchange processes between different water pools were detected. The isotropic chemical shift of the ¹H spectrum allows us to obtain information about the normalized enthalpy of activation characterizing the water exchange. These results show that the proton exchange membranes performances could be improved by addition of small concentrations of silica in the range of 5–10 wt.%.     

Theoretical Study of the Intramolecular Proton Transfer in the Tautomers of Cytosine Assisted by Water

Ab initio MP2 and DFT studies on the tautomers of cytosine and the related hydrated tautomers have been carried out. The ground‐state structures of four tautomers of cytosine and related transition states were fully optimized. The vibrational frequency analysis was performed on all the optimized structures. Detailed intrinsic reaction coordinate (IRC) calculations were carried out to guarantee the optimized transition‐state structures being connected to the related tautomers. We obtained the relative stability order for the tautomers of cytosine and the related hydrated tautomers. In the isolated and hydrated condition, the bond types of C(2) O(7) and C(4) N(8) greatly affect the stability of the cytosine tautomers. Moreover, we have explored the influence of the water molecules on the intramolecular proton transfer between the keto and enol forms of the cytosine tautomers. The first water molecule obviously decreases the isomerization activation energy for the monohydrated cytosine tautomers. It is shown that the isomerization energy barrier changes only a little when the second and third water molecules are added in the reaction loop. The solvent effects have an obvious influence on the proton‐transfer barrier of the isolated cytosine. However, the solvent effects seem to be insignificant for the isomerization energy barriers of the monohydrated, dihydrated and trihydrated cytosine. The water molecule in these complexes can be looked on as the explicit water. Therefore, the explicit water model may be more credible to explore the intramolecular proton transfer, in comparison with the PCM which is the implicit water model.     

Ab initio molecular-dynamics simulation of aqueous proton solvation and transport revisited

The solvation and transport of the hydrated excess proton is studied using the Car-Parrinello molecular-dynamics (CPMD) simulation method. The simulations were performed using BLYP and HCTH gradient-corrected exchange-correlation energy functionals. The fictitious electronic mass was chosen to be small enough so that the underlying water structural and dynamical properties were converged with respect to this important CPMD simulation parameter. An unphysical overstructuring of liquid water in the CPMD simulations using the BLYP functional resulted in the formation of long-lived hydrogen-bonding structures involving the excess proton and a particular (special) water oxygen. The excess proton was observed to be attracted to the special oxygen through the entire length of the BLYP CPMD simulations. Consequently, the excess proton diffusion was limited by the mobility of the special oxygen in the slowly diffusing water network and, in turn, the excess proton self-diffusion coefficient was found to be significantly below the experimental value. On the other hand, the structural properties of liquid water in the HCTH CPMD simulation were seen to be in better agreement with experiment, although the water and excess proton diffusions were still well below the experimental value.     

Density functional study of intradimer proton transfers in hydrated adenine dimer ions, A2(+)(H2O)n (n = 0-2)

Structures of mono- and dihydrated adenine dimers and their cations were calculated using B3LYP density functional theory with the 6-31+G(d,p) basis set, in order to help understand photofragmentation experiments of hydrated adenine dimers from the energetics point of view. Several important pathways leading to the major fragmentation product, protonated adenine ion (AH(+)), thermodynamically at minimum costs were investigated at the ground-state electronic potential surface of hydrated adenine dimer cations. Our calculations suggest that the proton transfer from one adenine moiety to the other in hydrated dimer ions readily occurs with negligible barriers in normal hydration conditions. In asymmetrically hydrated ions, however, the proton transfer to more hydrated adenine moieties is kinetically hindered due to heightened transition-state barriers, while the other way is still barrierless. Such directional preference in proton transfer may be characterized as a unique dimer ion property, stemming from the difference in basicity of the two nitrogen atoms involved in the double hydrogen bond that would be equivalent without hydration. We also found that dimer cleavage requires about 4 times larger energy than evaporation of individual water molecules, so it is likely that most solvent molecules evaporate before the eventual dimer cleavage when available internal energy is limited.     

磺化聚醚醚酮与壳聚糖共混制备直接甲醇燃料电池用质子交换膜

给出了不同磺化度下的磺化聚醚醚酮(SPEEK)用作质子交换膜的一系列性能,另外提出了一种新型的酸碱共混质子交换膜,其中,磺化聚醚醚酮和壳聚糖分别被选为酸性、碱性高分子电解质,并对所制备的质子交换膜的相关性能如质子传导性,甲醇渗透性,吸水率以及膜溶胀性、热稳定性等进行了表征,结果表明此种新型复合膜尽管在质子传导性能方面有所下降,阻醇性能改变不大,但是膜溶胀性和吸水率方面有了较大的改善.磺化度为71.4%的SPEEK与壳聚糖以5∶1摩尔比共混制备的质子交换膜,其性质可以与商品化的Nafion 117相媲美,有望在甲醇燃料电池中得到应用.     

The properties of ion-water clusters. I. The protonated 21-water cluster

The ab initio atom-centered density-matrix propagation approach and the multistate empirical valence bond method have been employed to study the structure, dynamics, and rovibrational spectrum of a hydrated proton in the "magic" 21 water cluster. In addition to the conclusion that the hydrated proton tends to reside on the surface of the cluster, with the lone pair on the protonated oxygen pointing "outwards," it is also found that dynamical effects play an important role in determining the vibrational properties of such clusters. This result is used to analyze and complement recent experimental and theoretical studies.