Adhesion Enhancement and Characterization of Plasma Polymerized 1,2-Dichloroethane on Polypropylene Surface

Polypropylene (PP) films were modified in 1,2-dichloroethane (DCE) plasma. Surface energy measurement and rate of deposition showed two-step surface modification. First, incorporation of chloride ions on PP surface followed by deposition of cross-linked layer. DCE plasma modified PP films were subsequently compared with earlier reported work on carbontetrachloride (CCl₄) and chloroform (CHCl₃) plasma modification. Modified films were characterized using ATR-FTIR technique by monitoring the relative changes in intensities of C–H stretch vibrations. The nature of deposition on PP film was characterized using FTIR technique and solubility test. Peel strength measurements of DCE, CCl₄, and CHCl₃ plasma modified films showed improvement in bonding strength. Durability of plasma modified PP film was studied by calculating surface energy and peel strength of samples aged for two months.     

Surface Modification and Characterization of Dichloromethane Plasma Treated Polypropylene Film

Surface of polypropylene (PP) film was modified in plasma of dichloromethane (CH₂Cl₂). The nature of surface modifications and formation of cross-linked layer due to plasma polymerization was studied by surface energy measurements and solubility test. Surface modification achieved by CH₂Cl₂ plasma was compared with the reported work on chloroform (CHCl₃) and carbontetrachloride (CCl₄) plasma modifications. Modified surface characterized by ATR-FTIR technique indicated formation of saturated and unsaturated cross-linked product. On the basis of relative intensity change of the specific bands, the site of attachment of chlorine on PP surface was investigated. Adhesive strength of modified film was measured by T-peel test method. Stability of modified surface was studied by measuring surface energy and peel strength after two months.     

Surface modification of poly(tetrafluoroethylene) films by plasma polymerization of glycidyl methacrylate and its relevance to the electroless deposition of copper

Surface modification of poly(tetrafluoroethylene) films by plasma polymerization and deposition of glycidyl methacrylate (GMA) was carried out. The effects of glow‐discharge conditions on the chemical structure and composition of the deposited GMA polymer were analyzed by X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy. XPS and FTIR results revealed that the epoxide groups in the plasma‐polymerized GMA (pp‐GMA) layer had been preserved to various extents, depending on the plasma deposition conditions. The morphology of the modified PTFE surface was investigated by atomic force microscopy (AFM). The pp‐GMA film with well‐preserved epoxide groups was used as an adhesion promotion layer to enhance the adhesion of the electrolessly deposited copper on the PTFE film. The T‐peel adhesion test results showed that the adhesion strength between the electrolessly deposited copper and the pp‐GMA‐modified PTFE (pp‐GMA‐PTFE) film was much higher than that between the electrolessly deposited copper and the pristine or the Ar plasma‐treated PTFE film. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3498–3509, 2000     

Plasma treatment of the inner surface of polymer tubes for the improvement of their anticoagulant properties

Small-diameter tubings from chlorinated polyethylene, polyetherurethane and silicone rubber were treated in a special plasma reactor using 1 kHz audiofrequency with rectangular characteristics with the aim to modify the inner surface of the tubings. Non-polymerizable gases like air, N₂, NH₃ and CO₂ were used as plasma gases to create suitable functional groups on the surfaces; hydrophilic monomers like N-methyl-N-vinylacetamide and vinyl acetate were used to obtain thin grafted homogeneous surface layers. Surface analysis of the modified tubings was generally conducted by contact angle measurements, and ATR-spectroscopy in the case of grafted materials. As a first test of the blood-compatibility the activated and non-activated partial thromboplastin time of human plasma exposed to the modified polymer tubings was determined.     

Surface modification of expanded poly(tetrafluoroethylene) by means of microwave plasma treatment for improvement of adhesion and growth of human endothelial cells

Surface modification of expanded poly(tetrafluoroethylene) (ePTFE) vascular prostheses was carried out by means of low pressure microwave plasma treatment. Hydrogen/ water vapour mixtures (containing excess of hydrogen) were shown to be efficient with respect to functionalization of PTFE. The results of treatments in dependence on various gas pressures and treatment times were detected by physicochemical techniques (zeta potential, wetting measurements) and by surface spectroscopy (XPS, ATR-FTIR). Furthermore, adhesion and proliferation of human endothelial cells from umbilical cord (HUVEC) onto modified ePTFE were observed in vitro in culture media. The results of this biological test of plasma treated materials correlate well with physicochemical surface parameters.     

Surface modification of UV‐cured epoxy resins by click chemistry

A novel method for surface modification of UV‐cured epoxy network was described. Photoinitiated cationic copolymerization of a bisepoxide, namely 3,4‐epoxy cyclohexylmethyl 3,4‐epoxycyclohexanecarboxylate (EEC) with epibromohydrine (EBH) by using a cationic photoinitiator, [4‐(2‐methylpropyl)phenyl]4‐methylphenyl‐iodonium hexafluorophosphate, in propylene carbonate solution was studied. The real‐time Fourier transform infrared spectroscopic, gel content determination and thermal characterization studies revealed that both EEC and EBH monomers take part in the polymerization and epoxy network possessing bromomethyl functional groups was obtained. The bromine functions of the cured product formed on the glass surface were converted to azide functionalities with sodium azide. Independently prepared alkyne functional poly(ethylene glycol) (PEG) was subsequently anchored to azide‐modified epoxy surface by a “click” reaction. Surface modification of the network through incorporation of hydrophilic PEG chain was evidenced by contact angle measurements. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2862–2868, 2010     

Surface modification of commercial composite polyamide reverse osmosis membranes

Radical grafting of two monomers, methacrylic acid and polyethylene glycolmethacrylate, onto commercial composite polyamide reverse osmosis membranes was performed. A redox system was used for initiation, and grafting was performed in an aqueous medium at room temperature. Surface grafting was characterized by ATR-FTIR, ESCA and streaming potential measurements. It was found that the membranes were surface modified without damage to their transport properties.     

Surface Energy and Wettability of Plasma-treated Polyacrylonitrile Fibers

Polyacrylonitrile fibers were treated with a nitrogen glow-discharge plasma. The surfaces of untreated and treated fibers were examined with contact angle measurements, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Surface energy calculations of the fibers were carried out from contact angle measurements using the relationships developed by Fowkes. It is found that plasma treatment causes a reduction in water contact angle on the fiber surfaces. The dispersion component of surface energy changes slightly, while the polar component is increased significantly from 14.6 mN/m to 58.7 mN/m and the total surface energy increase is 139%. The increase of surface energy is mainly caused by the introduction of hydrophilic groups on the fiber surfaces after plasma treatment.     

马来酸酐(MAH)表面改性纳米碳酸钙粉体的制备及表面性能

通过在两相法制备纳米碳酸钙的过程中添加一定量的马来酸酐(MAH)的方法，在纳米碳酸钙的表面引入羧基、羟基、双键等活性基团对纳米碳酸钙进行表面改性，并通过调节马来酸酐的用量，有效地控制纳米碳酸钙的极性和表面能。接触角实验结果表明，当马来酸酐的加入量为2%时可以获得界面性能最理想的改性纳米碳酸钙。还在此基础上提出了马来酸酐(MAH)对纳米碳酸钙进行表面改性的过程机理，并以SEM，ATR-FTIR和TGA等手段对上述过程机理进行了验证。     

Mechanisms for surface energy changes observed in plasma immersion ion implanted polyethylene: The roles of free radicals and oxygen-containing groups

Low density polyethylene (LDPE) was modified by plasma immersion ion implantation (PIII) with nitrogen ions of 20 keV. Surface energy and structural transformations were observed during storage of the modified LDPE in air after PIII, by wettability measurements and FTIR-ATR spectra respectively. The appearance of oxygen-containing groups has some kinetic stages with characteristic times from hours to days. The surface energy values attained and comparison with the kinetics of oxidation reveal that the initial changes in the surface energy of LDPE are caused mainly by free radicals and to a lesser extent by oxygen-containing groups. The final surface energies observed after the process known as hydrophobic recovery and the surface energies stabilize are attributable to oxygen-containing groups. The modified surface is “living” and an investigation of the wettability, surface energy, unsaturated and oxygen-containing groups in the surface layer of ion beam modified polymers is incomplete if the kinetics of structural transformations after modification is not taken into account.     

Surface characterization of poly(L-lactic acid)-methoxy poly(ethylene glycol) diblock copolymers by static and dynamic contact angle measurements, FTIR, and ATR-FTIR

The surface composition and surface free energy properties of two types of amphiphilic and semicrystalline diblock copolymers consisting of poly(L-lactic acid) coupled to (methoxy poly(ethylene glycol) (PLLA-MePEG) having differing block lengths of PEG were investigated by using static and dynamic contact angle measurements, transmission Fourier infrared spectroscopy (FTIR), and attenuated total reflection spectroscopy (ATR-FTIR) and compared with results obtained from PLLA and MePEG homopolymers. The contact angle results were evaluated by using the van Oss-Good method (acid-base method), and it was determined that the Lewis base surface tension coefficient (gamma-) of the copolymers increased with an increase of the PEG molar content at the copolymer surface. This result is in good agreement with the transmission FTIR and ATR-FTIR results but not proportional to them, indicating that the surfaces of the copolymers are highly mobile and that the molecular rearrangement takes place upon contact with a polar liquid drop. The dynamic contact angle measurements showed that the strong acid-base interaction between the oxygen atoms in the copolymer backbone of the relatively more hydrophilic PEG segments with the Lewis acidic groups of the polar and hydrogen-bonding water molecules enabled the surface molecules to restructure (conformational change) at the contact area, so that the PEG segments moved upward, whereas the apolar methyl pendant groups of PLLA segments buried downward.     

Grafting epoxy-modified hydrophilic polymers onto poly(dimethylsiloxane) microfluidic chip to resist nonspecific protein adsorption

In order to achieve a simple covalent hydrophilic polymer coating on poly(dimethylsiloxane) (PDMS) microfluidic chip, epoxy modified hydrophilic polymers were synthesized in aqueous solution with a persulfate radical initiation system, and crosslinked onto PDMS pretreated by oxygen plasma and silanized with 3-aminopropyl-triethoxysilanes (APTES). Glycidyl methacrylate (GMA) was copolymerized with acrylamide (poly(AAM-co-GMA)) or dimethylacrylamide (poly(DAM-co-GMA)), and graft polymerized with polyvinylpyrrolidone (PVP-g-GMA) or polyvinylalcohol (PVA-g-GMA). The epoxy groups in the polymers were determined by UV spectra after derivation with benzylamine. Reflection absorption infrared spectroscopy (RAIRS) confirmed covalent grafting of GMA-modified polymers onto PDMS surface. Electroosmotic flow (EOF) in the polymer grafted microchannel was strongly suppressed within the range pH 3-11. Surface adsorption of lysozyme and bovine serum albumin (BSA) was reduced to less than 10% relative to that on the native PDMS surface. On the GMA-modified polymer coated PDMS microchip, basic proteins, peptides, and sodium dodecyl sulfate (SDS) denatured proteins were separated successfully.     

Effect of oxygen plasma treatment on the release behaviors of poly(epsilon-caprolactone) microcapsules containing tocopherol

The biodegradable poly(epsilon-caprolactone) microcapsules (PCL) containing tocopherol (TC) were prepared by emulsion solvent evaporation method, and microcapsules were treated by oxygen plasma to enhance the hydrophilic microcapsules. The morphologies and thermal properties of the microcapsules were determined by SEM and DSC measurements. The microcapsules studied were characterized by surface free energy or work of adhesion through contact angle measurement. As a result, the features of the microcapsules could be adjusted by manufacturing condition, such as surfactant and core ratio. The surface free energy or work of adhesion of the microcapsules was increased with increasing the time of plasma treatment, which could be attributed to the increased hydrophilic groups during oxygen plasma treatment. The release profile of the microcapsules was determined by UV-vis spectroscopy and the microcapsules containing tocopherol showed the rapid release rate, as compared with untreated ones.     

Surface and Bulk Structure of Thin Spin Coated and Plasma-Polymerized Polystyrene Films

Polystyrene (PS) spin coated thin films were modified by O₂ and Ar plasma as well as by UV irradiation treatments. The modified PS samples were compared with plasma polymerized and commercial polystyrene. The effects of plasma (O₂ and Ar) and UV irradiation treatments on the surface and the bulk properties of the polymer layers were discussed. The surface properties were evaluated by X-ray Photoelectron Spectroscopy and Contact angle measurements and the bulk properties were investigated by FTIR and dielectric relaxation spectroscopy. As a result only one second treatment time was sufficient to modify the surface. However, this study was also dedicated to understand the effect of plasma and plasma irradiation on the deposited layers of plasma polymers. The dielectric measurements showed that the plasma deposited films were not thermally stable and underwent an undesired post-plasma chemical oxidation.     

Nitrogen plasma modification on polyimide films for copper metallization on microelectronic flex substrates

Surface modification of polyimide films Kapton E(N) and Upilex S by nitrogen plasmas were investigated for their enhanced adhesion strength with sputtered coppers. Peel tests demonstrate this improvement, with peel strengths of 7 and 12 N/m for unmodified Kapton E(N) and Upilex S, and 1522 and 1401 N/m for nitrogen plasma‐modified Kapton E(N) and Upilex S at certain plasma conditions. Atomic force microscopy (AFM) and the sessile drop method indicated the surface roughness, and the surface energy of polyimide films were highly increased by nitrogen plasmas. This study shows the enhanced adhesion strengths of polyimide films with sputtered coppers by nitrogen plasmas, and these nitrogen plasmas were strongly affected by the surface characteristics of polyimide films. Electron spectroscopy for chemical analysis (ESCA) observed the increased surface energy on polyimide films by nitrogen plasmas was due to the increased surface composition of O and the increased chemical bond of C? O. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2023–2038, 2005     

Surface modification and adhesion improvement of polyester films

Facile surface modification of polyester films was performed via chemical solutions treatment. Surface hydrolysis was carried out by means of sodium hydroxide solutions, leading to the formation of carboxylate groups. Three commercial polyester films of 100 μm in thickness were used in this work: AryLite?, Mylar?, and Teonex?, hydrolysis time being the main modification parameter. FTIR-ATR analysis, topography and contact angle (CA) measurements, surface free energy (SFE) and T-Peel adhesion tests were carried out to characterize the modified films. A quantitative estimate of the carboxylates surface coverage as a function of treatment time was obtained through a supramolecular approach, i.e. the ionic self-assembly of a tetracationic porphyrin chromophore onto the film surface. The surface free energy and critical surface tension of the hydrolyzed polyesters was evaluated by means of Zisman, Saito, Berthelot and Owens-Wendt methods. It was shown that NaOH solution treatment increases roughness, polarity and surface free energy of polymers. As a result, T-Peel strengths for modified Mylar? and Teonex? films were respectively 2.2 and 1.8 times higher than that for the unmodified films, whereas AryLite? adhesion test failed.     

Surface bio-modification of poly(hydroxybutyrate-co-hydroxyhexanoate) and its aging effect

In this work, poly(hydroxybutyrate-co-hydroxyhexanoate) (PHBHHx) film was fabricated by a solution-casting method and subsequently was modified by NaOH treatment to improve the surface hydrophilic property. Surface properties including hydrophilicity, surface appearance and functional groups were characterized by water contact angle measurement, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results showed the hydrophilicity of PHBHHx film was obviously improved by the NaOH treatment due to the topography changes promoted by the NaOH-etching and the introduction of polar groups included hydroxyl and carboxyl on the topmost surface layers. However, the modified film exhibited an aging effect: the hydrophilicity decreases with time elapsed during storage. It was found that the aging rate was strongly dependent on the crystallinity of the film and the storage environment. The sample with high-crystallinity lost hydrophilic property slower than that with low-crystallinity. Hydrophilic and low-temperature environment also prevented the modified PHBHHx from fast losing of the hydrophilicity.     

Plasma modified polymers as a support for enzyme immobilization 1.: Allyl alcohol plasma

The paper describes deposition of plasma polymerized allyl alcohol on polysulfone film. It is shown that film surface becomes more hydrophilic after plasma treatment independently on presence of argon in a reaction mixture. The chemistry of the new surface layer was established by FTIR-ATR and ESCA spectroscopy. The substrate placed close to the plasma edge was the most hydrophilic but the amount of hydoxyl groups was not the highest there. Presence of argon stabilized the plasma but the deposited layer contained relatively less oxygen-bearing functionalities. The plasma treated polymer was subjected to xylose isomerase immobilization. For this purpose the divinylsulfone method was adapted. The studies revealed no correlation between the surface hydrophilicity and efficiency of immobilization.     

Modification of polysulfone membranes 5. Effect of n-butylamine and allylamine plasma

This paper describes some properties of microwave plasma polymers of n-butylamine and allylamine deposited on the surface of polysulfone substrate. Contact angle evaluation, ATR-FTIR spectroscopy, X-ray photoelectron spectroscopy analysis and estimation of pore size distribution of ultrafiltration polysulfone membranes were used. It was found that addition of Ar to the amine vapor significantly stabilized the plasma and converted it to the ablation mode. The surface became more hydrophilic and the surface groups were enriched in oxygen. Both amines gave deposits of various compositions: the n-butylamine polymer was not as enriched in amines as the polymer formed from allylamine. However, the amounts of nitrogen in both deposits indicated allylamine to be the precursor for the preparation of membranes with weakly basic functionalities. When porous membranes are modified, the ultrafilters obtained may be named `fouling protected' as they do not foul so intensively with proteins as their unmodified analogues. To a lesser extent, similar behavior was shown by membranes modified by deposition of plasma-polymerized n-butylamine.     

IMPROVING NONTHROMBOGENICITY OF CHITIN WITH ZWITTERIONIC STRUCTURE OF SULFOBETAINE

In order to improve the nonthr0mbogenicity of chitin, a new monomer, N, N-dimethyl(β-hydroxyethyloxyethyl) ammonium propanesulfonate (DHAPS) was designed, synthesized and grafted onto the chitin membrane by using hexamethylene diisocyanate (HDI) as a coupling agent. Surface analysis of the grafted membranes by ATR-FTIR and XPS confirms that DHAPS has been successfully grafted onto the membrane surface. The platelet resistant property of the grafted membranes was evaluated by a platelet-rich plasma adhesion method. The results showed that platelet-adhesive resistance of the modified membrane has been greatly improved.