Thermotropic and barotropic phase transitions of dialkyldimethylammonium bromide bilayer membranes: effect of chain length

The bilayer phase transitions of dialkyldimethylammonium bromides (2C(n)Br; n = 12, 14, 16) were observed by differential scanning calorimetry and high-pressure light-transmittance measurements. Under atmospheric pressure, the 2C(12)Br bilayer membrane underwent the stable transition from the lamellar crystal (L(c)) phase to the liquid crystalline (L(α)) phase. The 2C(14)Br bilayer underwent the main transition from the metastable lamellar gel (L(β)) phase to the metastable L(α) phase in addition to the stable L(c)/L(α) transition. For the 2C(16)Br bilayer, moreover, three kinds of phase transitions were observed: the metastable main transition, the metastable transition from the metastable lamellar crystal (L(c(2))) phase to the metastable L(α) phase, and the stable lamellar crystal (L(c(1)))/L(α) transition. The temperatures of all the phase transitions elevated almost linearly with increasing pressure. The temperature (T)-pressure (p) phase diagrams of the 2C(12)Br and 2C(14)Br bilayers were simple, but that of the 2C(16)Br bilayer was complex; that is, the T-p curves for the metastable main transition and the L(c(2))/L(α) transition intersect at ca. 25 MPa, which means the inversion of the relative phase stability between the metastable phases of L(β) and L(c(2)) above and below the pressure. Moreover, the T-p curve of the L(c(2))/L(α) transition was separated into two curves under high pressure, and as a result, the pressure-induced L(c(2P)) phase appeared in between. Thermodynamic quantities for phase transitions of the 2C(n)Br bilayers increased with an increase in alkyl-chain length. The chain-length dependence of the phase-transition temperature for all kinds of transitions observed suggests that the stable L(c(1))/L(α) transition incorporates the metastable L(c(2))/L(α) transition in the bilayers of 2C(n)Br with shorter alkyl chains, and the main-transition of the 2C(12)Br bilayer would occur at a temperature below 0 °C.     

Nonionic diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behaviour

The thermotropic and lyotropic liquid crystalline phase behaviour of a series of diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains (geranoyl, H-farnesoyl, and phytanoyl) has been investigated. When neat, both H-farnesoyl and phytanoyl diethanolamide form a smectic liquid crystalline structure at sub-zero temperatures. In addition, all three diethanolamides exhibit a glass transition temperature at around -73 °C. Geranoyl diethanolamide forms a lamellar crystalline phase with a lattice parameter of 17.4 ? following long term storage accompanied by the loss of the glass transition. In the presence of water, H-farnesoyl and phytanoyl diethanolamide form lyotropic liquid crystalline phases, whilst geranoyl diethanolamide forms an L(2) phase. H-farnesoyl diethanolamide forms a fluid lamellar phase (L(α)) at room temperature and up to ～ 40 °C. Phytanoyl diethanolamide displays a rich mesomorphism forming the inverse diamond (Q(II)(D)) and gyroid (Q(II)(G)) bicontinuous cubic phases in addition to an L(α) phase.     

Hydrostatic pressure reveals bilayer phase behavior of dioctadecyldimethylammonium bromide and chloride

Bilayer phase transitions of dioctadecyldimethylammonium bromide (2C(18)Br) and chloride (2C(18)Cl) were observed by differential scanning calorimetry and high-pressure light-transmittance measurements. The 2C(18)Br bilayer membrane showed different kinds of transitions depending on preparation methods of samples under atmospheric pressure. Under certain conditions, the 2C(18)Br bilayer underwent three kinds of transitions, the metastable transition from the metastable lamellar crystal (L(c(2))) phase to the metastable lamellar gel (L(β)) phase at 35.4 °C, the metastable main transition from the metastable L(β) phase to the metastable liquid crystalline (L(α)) phase at 44.5 °C, and the stable transition from the stable lamellar crystal (L(c(1))) phase to the stable L(α) phase at 52.8 °C. On the contrary, the 2C(18)Cl bilayer underwent two kinds of transitions, the stable transition from the stable L(c) phase to the stable L(β) phase at 19.7 °C and the stable main transition from the stable L(β) phase to the stable L(α) phase at 39.9 °C. The temperatures of the phase transitions of the 2C(18)Br and 2C(18)Cl bilayers were almost linearly elevated by applying pressure. It was found from the temperature (T)-pressure (p) phase diagram of the 2C(18)Br bilayer that the T-p curves for the main transition and the L(c(1))/L(α) transition intersect at ca. 130 MPa because of the larger slope of the former transition curve. On the other hand, the T-p phase diagram of the 2C(18)Cl bilayer took a simple shape. The thermodynamic properties for the main transition of the 2C(18)Br and 2C(18)Cl bilayers were comparable to each other, whereas those for the L(c(1))/L(α) transition of the 2C(18)Br bilayer showed considerably high values, signifying that the L(c(1)) phase of the 2C(18)Br bilayer is extremely stable. These differences observed in both bilayers are attributable to the difference in interaction between a surfactant and its counterion.     

Evidence of formation of ammonium perfluorononanoate/2H2O multilamellar vesicles: morphological analysis by rheology and rheo-2H NMR experiments

Rheology and rheo-(2)H NMR measurements are presented for 30 wt % ammonium perfluorononanoate (APFN)/(2)H(2)O mixture in the temperature range 20-70 °C. A first-order lamellar-to-nematic transition occurs at 42 °C, and a first-order nematic-to-isotropic transition occurs at 49 °C. Different rheological behaviors of the lamellar phase were observed with increasing the temperature. The lamellar structure at low temperature (Lα(-)) has a clear gel-like viscoelasticity, while at high temperature the lamellar structure (Lα(+)) has a liquid-like response. In this study we have observed for the first time, along with the lamellar phase of a surfactant containing fluorinated fatty acid, the formation of multilamellar vesicles (MLVs) ("onions") induced by shear. With the aid of nonlinear rheology and rheo-NMR techniques, onion formation was found to occur in both temperature regimes of the lamellar phase, but at different strain units. It is suggested that the lamellar phase consists of smectic structures in both Lα(-) and Lα(+), but with different percentages of defect density.     

Effects of newcastle disease virus glycoproteins on the structural and thermal behaviour of 1,2-dihexadecyl-sn-glycero-3-phosphatidylcholine lipid membranes under osmotic stress conditions

The interaction of hem agglutininneuraminidase (HN) and fusion (F) glycoproteins with swollen vesicles of 1,2-dihexadecyl-sn-glycero-3-phosphatidylcholine (DHPC) was investigated under transition from gel to fluid phase. X-ray studies of the structure of lipid/HN-F mixtures in normal and swollen vesicles have shown that the lamellar bilayer structure predominate in the gel and liquid crystalline phases. A swollen lipid phase, in which the mean repeat distance of lipid bilayers is larger than in the other phases was found. The nature of this phase is similar to the anomalous bilayer swelling reported in literature. The presence of HN and F in the vesicles led to the coexistence of structures with low and high lamellar order, showing larger repeat distance in comparison with the pure lipid. This finding was attributed to the increase in the lipid bilayer thickness due to the HN-F included in the free water layer. The thermal behaviour of the system was not affected by the vesicle swelling. The data showed the existence of gel and liquid crystalline lamellar phases and changes in lipid/HN-F specific heats, mainly due to the concentration effect of the HN-F and its location in the free water layer.     

Nonionic diethanolamide amphiphiles with unsaturated C18 hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behavior

The neat and lyotropic liquid crystalline phase behavior of three nonionic diethanolamide amphiphiles with C18 hydrocarbon chains containing one, two or three unsaturated bonds has been examined. This has allowed the effect of degree of unsaturation on the phase behavior of diethanolamide amphiphiles to be investigated. Neat linoleoyl and linolenoyl diethanolamide undergo a transition from a glassy liquid crystal to a liquid crystal at ～-85 °C, while neat oleoyl diethanolamide undergoes a transition at ～-60 °C to a liquid crystalline material before re-crystallizing at -34 °C. Oleoyl diethanolamide then undergoes a third transition from a crystalline phase to a smectic liquid crystalline phase at ～5 °C. In the absence of water, the transition temperature from a smectic liquid crystal to an isotropic liquid decreases with increasing unsaturation. The addition of water results in the formation of a lamellar phase (L(α)) for all three amphiphiles. The lamellar phase is stable under excess water conditions up to temperatures of at least 70 °C. Approximate partial binary amphiphile-water phase diagrams generated for the three unsaturated C18 amphiphiles indicate that the excess water point for each amphiphile occurs at ～60% (w/w) amphiphile.     

Nanostructural studies on monoelaidin-water systems at low temperatures

In recent years, lipid based nanostructures have increasingly been used as model membranes to study various complex biological processes. For better understanding of such phenomena, it is essential to gain as much information as possible for model lipid structures under physiological conditions. In this paper, we focus on one of such lipids--monoelaidin (ME)--for its polymorphic nanostructures under varying conditions of temperature and water content. In the recent contribution (Soft Matter, 2010, 6, 3191), we have reported the phase diagram of ME above 30 °C and compared with the phase behavior of other lipids including monoolein (MO), monovaccenin (MV), and monolinolein (ML). Remarkable phase behavior of ME, stabilizing three bicontinuous cubic phases, motivates its study at low temperatures. Current studies concentrate on the low-temperature (<30 °C) behavior of ME and subsequent reconstruction of its phase diagram over the entire temperature-water composition space (temperature, 0-76 °C; and water content, 0-70%). The polymorphs found for the monoelaidin-water system include three bicontinuous cubic phases, i.e., Ia3d, Pn3m, and Im3m, and lamellar phases which exhibit two crystalline (L(c1) and L(c0)), two gel (L(β) and L(β*)), and a fluid lamellar (L(α)) states. The fluid isotropic phase (L(2)) was observed only for lower hydrations (<20%), whereas hexagonal phase (H(2)) was not found under studied conditions. Nanostructural parameters of these phases as a function of temperature and water content are presented together with some molecular level calculations. This study might be crucial for perception of the lyotropic phase behavior as well as for designing nanostructural assemblies for potential applications.     

二棕榈酰磷脂酰胆碱/豆固醇脂质体液态有序相的结构性质:同步辐射X光衍射研究

用同步辐射小角和宽角X光衍射实验技术研究了由二棕榈酰磷脂酰胆碱(DPPC)和豆固醇所形成的脂质体的液态有序相的结构性质. 结果表明液态有序相的小角X光衍射d值(d-spacing)随着固醇温度和浓度的变化仅有微小的改变. 与凝胶相及液晶相的宽角X光衍射d值相比, 液态有序相的宽角X光衍射d值有更宽的变化范围, 在30到52 °C的温度范围内, 液态有序相的宽角X光衍射d值从0.422 nm变化到0.460 nm. 电子云密度计算表明液态有序相的脂双层厚度和水层厚度都要大于与之平衡共存的液晶相的脂双层厚度和水层厚度. 电子云密度计算结果还表明液态有序相的脂双层厚度随温度升高而降低. 本研究结果对于从定量的角度认识 生物膜的相态及深入认识生物膜中的有序结构具有重要意义.     

Synthesis, characterization and phase transitions of the inorganic-organic layered perovskite-type hybrids [(C(n)H(2n+1)NH3)2PbI4], n = 7, 8, 9 and 10

Four inorganic-organic hybrid materials that consist of 2-D layers of corner-sharing lead(II) iodide octahedra separated by alkylammonium chains have been crystallized and characterized via single-crystal XRD (SCXRD). The four hybrids, represented by the general formula [(C(n)H(2n+1)NH(3))(2)PbI(4)] and abbreviated C(n)PbI, exhibit multiple reversible phase transitions for a narrow temperature range. The transition temperatures were determined with differential scanning calorimetry experiments. The number of transitions and the transition temperatures are dependant on the chain length; for n = 7 and 10, there are three transitions, and for n = 8 and 9, there are two transitions. Regardless of the number of transitions, all four compounds have identical lowest temperature phases, which have inorganic layers that are eclipsed, non-planar conformations of the alkyl ammonium chains and yellow-coloured crystals. The next highest temperature phase for three of the compounds (C(10)PbI goes through an intermediate phase first), has staggered inorganic layers, all-trans planar conformations of the chains and orange coloured crystals. The highest temperature phase for n = 8 and 10 has red-coloured crystals and shows a disordering of the alkylammonium chains over two positions and staggered inorganic layers. The high temperature phase of C(7)PbI retains its orange colour and has only increased thermal motion of its alkylammonium chain. The structure of the high temperature phase of C(9)PbI was not determined. The SCXRD structures of the various phases give clues to the structural changes that the compounds undergo at the phase transitions, which will now enable future studies of their optical and electronic properties to be better understood.     

Thermal behavior of 1,2-dipalmitoyl-sn-3-phosphoglycerocholine bi- and multi-layers, deposited with physical vapor deposition under ellipsometric growth control

1,2-dipalmitoyl-sn-3-phosphoglycerocholine membranes were deposited onto a silicon substrate (Si/SiO(2)) using physical vapor deposition with in situ ellipsometric thickness control. Along several heating cycles it was possible to identify well-defined boundaries for gel, ripple, liquid crystalline, and fluid-disordered phases. Particularly, the second order transition between gel and ripple phase was clearly identified in the range of ~28-34 °C using Raman spectroscopy. Atomic force microscopy and imaging ellipsometry (IE) were used to observe and characterize the ripple phase undulations of period λ = 20.8 nm and average height h = 19.95 nm along the temperature interval of ~34 to 40 °C. Clusters/agglomerations heights of more than twice the membrane thickness were observed with IE, induced by heating cycles.     

Pressure-induced phase transitions on a liquid crystalline europium(III) complex

The effect of pressure on the phase behavior of the liquid crystalline complex [Eu(bta)(3)L(2)] (bta is benzoyltrifluoroacetonate, and L is the Schiff base 2-hydroxy-N-octadecyl-4-tetradecyloxybenzaldimine) was studied by X-ray diffraction, Raman spectroscopy, and luminescence spectroscopy. The pressure was varied between ambient pressure and 8.0 GPa. [Eu(bta)(3)L(2)] exhibits a smectic A (SmA) phase at room temperature. The complex undergoes a transition from the SmA phase to a solid lamellar structure around 0.22 GPa and another transition from the solid lamellar phase to an amorphous state from 1.6 to 3.5 GPa. At low pressures, the smectic layer spacing increases, and the intermolecular distance decreases. Above 3.5 GPa, both the interlamellar and the intermolecular spacings hardly change, but the intensity of X-ray reflections exhibits a remarkable decrease and eventually vanishes. An interpretation of the changes in the molecular structure is given. It was found that less interdigitation of the alkyl chains situated in adjacent layers and/or a full extension of the alkyl chains occurred at low pressures and that the second phase transition was accompanied by a transfer of the hydrogen atom from the nitrogen atom of the imine group to the oxygen atom of the Schiff base ligand. The effect of applying pressure equals that of the lanthanide contraction on the phase behavior.     

Theory of volume phase transitions of side-chain liquid crystalline gels

We present a mean field theory to describe volume phase transitions of side-chain liquid crystalline gels. Three different uniaxial nematic phases (N(1), N(2), and N(3)) are defined by using orientational order parameter S(m) of side-chain liquid crystals (mesogens) and S(b) of backbone chains. We derive the free energy for the three nematic phases of side-chain liquid crystalline gels dissolved in isotropic solvents and calculate the swelling curve of the gel, the order parameters of a backbone chain and of side-chain liquid crystals, and the deformation of the gel as a function of temperature and an electric field. We find isotropic-nematic (N(1), N(2), and N(3)) and N(1)N(2) phase transitions of the gels, depending on the interaction between a backbone chain and a side-chain liquid crystal.     

Phase behavior of an extended surfactant in water and a detailed characterization of the concentrated phases

The formation of microemulsions with triglycerides at ambient conditions can be improved by increasing the surfactant-water and surfactant-oil interactions. Therefore, extended surfactants were developed, which contain hydrophilic/lipophilic linkers. They have the ability to stretch further into the oil and water phase and enhance the solubility of oil in water. In this work, the phase behavior of a chosen extended surfactant (C(12-14)-PO(16)-EO(2)-SO(4)Na, X-AES) in H(2)O/D(2)O at high surfactant concentrations (30-100 wt %) and at temperatures between 0 and 90 °C is studied for the first time. The lyotropic liquid crystals formed were determined by optical microscopy, small-angle X-ray scattering (SAXS), and (2)H and (23)Na NMR, and a detailed phase diagram of the concentrated area is given. The obtained mesophases are a hexagonal phase (H(1)), at low temperatures and small concentrations, a lamellar phase (L(α)) at high temperatures or concentrations, a bicontinuous cubic phase (V(2)) as well as a reverse hexagonal phase (H(2)). To our knowledge, this is the first surfactant that forms both H(1) and H(2) phases without the addition of a third compound. From the (2)H NMR quadrupole splittings of D(2)O, we have examined water binding in the L(α) and the H(2) phases. There is no marked difference in the bound water between the two phases. Where sufficient water is present, the number of bound water molecules per X-AES is estimated to be ca. 18 with only small changes at different temperatures. Similar results were obtained from the (23)Na NMR data, which again showed little difference in the ion binding between the L(α) and the H(2) phases. The X-ray diffraction data show that X-AES has a much smaller average length in the L(α) phase compared to the all-trans length than in the case for conventional surfactants. At very high surfactant concentrations an inverse isotropic solution (L(2)), containing a small fraction of solid particles, is formed. This isotropic solution is clearly identified and the size of the reversed micelles was determined using (1)H NMR measurements. Furthermore, the solid particles within the L(2) phase and the neat surfactant were analyzed. The observed results were compared to common conventional surfactants (e.g., sodium dodecyl sulfate, sodium lauryl ether sulfate, and sodium dodecyl-p-benzene sulfonate), and the influence of the hydrophilic/lipophilic linkers on the phase behavior was discussed.     

Driving forces of phase transitions in surfactant and lipid systems

In aqueous surfactant and lipid systems, different liquid crystalline phases are formed at different temperatures and water contents. The "natural" phase sequence implies that phases with higher curvature are formed at higher water contents. On the other hand, there are exceptions to this rule, such as the monoolein/water system. In this system an anomalous transition from lamellar to reverse cubic phase upon addition of water is observed. The calorimetric data presented here show that the hydration-induced transitions to phases with higher curvature are driven by enthalpy, while the transitions to phases with lower curvature are driven by entropy. It is shown that the driving forces of phase transitions can be determined from the appearance of the phase diagram using the approach based on van der Waals differential equation. From this approach it follows that the slope of the phase boundary should be positive with respect to water content if the phase diagram obeys the "natural" phase sequence. The increase of entropy, which drives the anomalous phase transitions, arises from the increase of disorder of the hydrocarbon chains.     

Hydrostatic pressure effects on the lamellar to gyroid cubic phase transition of monolinolein at limited hydration

Monoacylglycerol based lipids are highly important model membrane components and attractive candidates for drug encapsulation and as delivery agents. However, optimizing the properties of these lipids for applications requires a detailed understanding of the thermodynamic factors governing the self-assembled structures that they form. Here, we report on the effects of hydrostatic pressure, temperature, and water composition on the structural behavior and stability of inverse lyotropic liquid crystalline phases adopted by monolinolein (an unsaturated monoacylglycerol having cis-double bonds at carbon positions 9 and 12) under limited hydration conditions. Six pressure-temperature phase diagrams have been determined using small-angle X-ray diffraction at water contents between 15 wt % and 27 wt % water, in the range 10-40 °C and 1-3000 bar. The gyroid bicontinuous cubic (Q(II)(G)) phase is formed at low pressure and high temperatures, transforming to a fluid lamellar (L(α)) phase at high pressures and low temperature via a region of Q(II)(G)/L(α) coexistence. Pressure stabilizes the lamellar phase over the Q(II)(G) phase; at fixed pressure, increasing the water content causes the coexistence region to move to lower temperature. These trends are consistent throughout the hydration range studied. Moreover, at fixed temperature, increasing the water composition increases the pressure at which the Q(II)(G) to L(α) transition takes place. We discuss the qualitative effect of pressure, temperature, and water content on the stability of the Q(II)(G) phase.     

Fragmentation of the lamellae and fractionation of polymer coils upon mixing poly(dimethylacrylamide) with the lamellar phase of aerosol OT in water

The lamellar mesophase formed by surfactant 1,4-bis(2-ethylhexyl) sodium sulfosuccinate (AOT) in deuterated water is mixed with poly(dimethylacrylamide) (PDMAA) polymers of low molecular weight (Mn= (2-20) x 10(3)). The mixtures separate into microphases (lamellar plus isotropic polymer solution). Their microstructures are studied by microscopy, small-angle X-ray scattering (SAXS), and deuterium NMR (2H NMR). According to SAXS, the lamellar phase fractionates the molecular weight distribution of the polymer, by dissolving only chains with coil sizes smaller than the thickness of the water layers between lamellae, and keeping larger chains segregated from the lamellar phase. The fraction of polymer that is segregated from the lamellar phase grows with Mn of the polymer. In 2H NMR, there are two signals, a quadrupolar doublet (water molecules hydrating the anisotropic lamellar phase contribute to this doublet) and a singlet (water molecules in the isotropic polymer solution contribute to this singlet). These two signals are deconvoluted to analyze the phases. Mixing with the polymer produces the partial dispersion of the lamellar phase into small fragments (microcrystallites). The structure of these microcrystallites is such that they conserve the regular long period spacing of the macrophase, and are thus identified in SAXS, but they are smaller than the minimum size required to produce quadrupolar splitting (about 4 microm), and therefore, in 2H NMR, they contribute to the singlet. 2H NMR can thus not distinguish between small microcrystallites and an isotropic polymer solution segregated from the lamellar phase; instead small microcrystallites are detected as an apparent increase of the isotropic solution. The degree of dispersion produced by the polymer in the lamellar phase is correlated with the degree of segregation that the polymer suffers. Thus, much greater dispersion into microcrystallites is produced by the higher Mn polymers than by the lower Mn polymers (in the range covered by the present samples, although with a much higher molecular weight sample (3 x 10(6)) that is totally segregated no such microcrystallites were detected).     

Self-assembled aggregates originated from the balance of hydrogen-bonding, electrostatic, and hydrophobic interactions

Rich phase behavior was observed in salt-free cationic and anionic (catanionic) mixtures of a double-tailed surfactant, di(2-ethylhexyl)phosphoric acid (abbreviated as DEHPA), and tetradecyldimethylamine oxide (C(14)DMAO) in water. At a fixed C(14)DMAO concentration, phase transition from L(1) phase to L(α) phase occurs with increasing amounts of DEHPA. Moreover, in the L(α) phase, with the increase in DEHPA concentration, a gradual transition process from vesicle phase (L(αv)) to stacked lamellar phase (L(αl)) was determined by cryo- and FF-TEM observations combining with (2)H NMR measurements. The rheological data show that the viscosity increases with DEHPA amounts for L(αv) phase samples because of the increase in vesicle density. At a certain molar ratio of DEHPA to C(14)DMAO, i.e., 80:250, the samples are with the highest viscoelasticity, indicating the existence of densely packed vesicles. While for L(αl) phase samples, with increasing DEHPA amount, a decrease of bilayer curvature was induced, leading to a decrease of viscosity obviously. Compared with general catanionic surfactant mxitures, in addition to the electrostatic interaction of ion pairs, the transition of the microstructures is also ascribed to the formation of the hydrogen bonding (-N(+)-O-H···O-N-) between C(14)DMAO molecules and protonated C(14)DMAOH(+), which induces the growth of aggregates and the decrease of aggregate curvatures.     

Phase polymorphism by mixing of poly(oxyethylene)-poly(dimethylsiloxane) copolymer and nonionic surfactant in water

The phase behavior of the water/poly(oxyethylene)-poly(dimethylsiloxane) copolymer (Si25C3EO51.6)/pentaoxyethylene dodecyl ether (C12EO5) ternary system has been studied. Both the silicone copolymer and the surfactant have equal volumes of hydrophilic and lipophilic parts; i.e., these are balanced amphiphiles. Although only a lamellar phase is observed in water-Si25C3EO51.6 and water-C12EO5 binary systems, a variety of liquid crystalline phases, including normal micellar cubic (I1), hexagonal (H1), bicontinuous cubic (V1), lamellar (L(alpha)), reverse bicontinuous cubic (V2), and reverse hexagonal (H2), are observed in the copolymer-rich region of the ternary phase diagram. The small C12EO5 molecules dissolve at the hydrophobic interface in the thick bilayer of the Si25C3EO51.6 L(alpha) phase occupying a large area of the total interface of the aggregates and modulate the curvature of the aggregates. Hence a variety of self-assembled structures are observed. In contrast, Si25C3EO51.6 is not dissolved in the thin bilayer of the C12EO5 lamellar phase (L'(alpha)). Hence, the C12EO5 L'(alpha) phase coexists with copolymer-rich L(alpha) and H2 phases. Consequently, small surfactant molecules are dissolved in a large silicone copolymer aggregate to induce a change in layer curvature, but a large copolymer molecule is hard to incorporate with surfactant aggregates.     

Structural evolution of environmentally responsive cationic liposome-DNA complexes with a reducible lipid linker

Environmentally responsive materials (i.e., materials that respond to changes in their environment with a change in their properties or structure) are attracting increasing amounts of interest. We recently designed and synthesized a series of cleavable multivalent lipids (CMVLn, with n = 2-5 being the number of positive headgroup charges at full protonation) with a disulfide bond in the linker between their cationic headgroup and hydrophobic tails. The self-assembled complexes of the CMVLs and DNA are a prototypical environmentally responsive material, undergoing extensive structural rearrangement when exposed to reducing agents. We investigated the structural evolution of CMVL-DNA complexes at varied complex composition, temperature, and incubation time using small-angle X-ray scattering (SAXS) and wide-angle X-ray scattering (WAXS). A related lipid with a stable linker, TMVL4, was used as a control. In a nonreducing environment, CMVL-DNA complexes form the lamellar (L(α)(C)) phase, with DNA rods sandwiched between lipid bilayers. However, new self-assembled phases form when the disulfide linker is cleaved by dithiothreitol or the biologically relevant reducing agent glutathione. The released DNA and cleaved CMVL headgroups form a loosely organized phase, giving rise to a characteristic broad SAXS correlation profile. CMVLs with high headgroup charge also form condensed DNA bundles. Intriguingly, the cleaved hydrophobic tails of the CMVLs reassemble into tilted chain-ordered L(β') phases upon incubation at physiological temperature (37 °C), as indicated by characteristic WAXS peaks. X-ray scattering further reveals that two of the three phases (L(βF), L(βL), and L(βI)) constituting the L(β') phase coexist in these samples. The described system may have applications in lipid-based nanotechnologies.     

Discotic liquid-crystalline materials based on porphycenes: a mesogenic metalloporphycene-tetracyanoquinodimethane (TCNQ) adduct

A number of substituted zinc(II) porphycenes and porphyrins have been synthesized as potentially mesogenic materials. One of the resulting porphycenes, bearing eight decyloxy chains, exhibits two mesophases, a transient lamellar phase (Lam) and a highly ordered lamello-columnar phase (L(Col)), with remarkably different structural characteristics. The same zinc(II) porphycene also forms an electron donor-acceptor (EDA) complex with tetracyanoquinodimethane (TCNQ), generating a hexagonal columnar mesophase (Col(h)) that is thermally stable up to ca. 200 degrees C. The EDA interaction between porphycene and TCNQ has been probed using electronic and vibrational spectroscopy. A mixture of zinc(II) porphyrins, isomeric with the above porphycene complex, forms a rectangular columnar mesophase (Col(r)).