Palladium catalysts on porous nickel substrates for alcohol fuel cells

Parameters characterizing the active surface of catalytic palladium layers formed from mixed glycinate-chloride and ammonia complexes of palladium(II) were determined. Cyclic voltammetry on a rotating disc electrode was used to study the catalytic activity of nickel substrates and palladium layers in the reaction of methanol and ethanol oxidation in an alkaline medium. It was shown that electrodes with palladium deposited from mixed glycinate-chloride solutions have a higher catalytic activity that those formed from ammonia palladium(II) complexes.     

Effective binuclear Pd(II) complexes for Suzuki reactions in water

A series of new ionic binuclear Pd(II) complexes supported by water‐soluble bis(α‐diimine) ligands were prepared and employed as catalysts for the palladium‐catalyzed Suzuki reaction in aqueous media. The binuclear nature of the complexes increased the reaction rate, while electronic and steric modification of the ligand frameworks had a remarkable influence upon the catalytic activity of the palladium complexes. The catalysts were shown to be homogeneous through mercury poisoning experiments and complexes could be recycled more than 10 times without loss of catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

The synthesis and characterisation of immobilised palladium carbene complexes and their application to heterogeneous catalysis

Silica supported palladium NHC complexes have been prepared by two different routes: one involving the reaction of silica-supported imidazolium salts with palladium acetate and a direct immobilisation of a pre-formed complex by reacting a (trimethoxysilylpropyl)-N-aryl-imidazolylidene palladium complex with surface hydroxyl groups. A small range of catalysts of varying steric bulk were prepared in order to evaluate the effect on catalytic conversion. The activity of the palladium catalysts in Suzuki cross-coupling reactions has been established. The catalysts prepared by immobilising pre-formed palladium complexes gave superior results for the conversion of aryl bromides and aryl chlorides. In addition, use of sterically bulky NHCs (such as the N-2,6-(diisopropyl)phenyl-substituted ligand) resulted in increased catalytic activity, which is analogous to the trends noted in homogeneous catalysis.     

高分子钯络合物催化的亚胺化合物的加氢反应

制备了一系列以二氧化硅为载体的侧链上含有各种氮配位基团的聚硅氧烷-钯络合物,这些高分子钯络合物能够在常温常压下催化亚胺化合物的加氢反应并表现出不同程度的催化活性.对其中聚-(N,N-二乙酰基)-γ-氨丙基硅氧烷-钯络合物催化的亚苄基苯胺的加氢反应做了比较深入的研究,发现该催化剂在反应中是稳定的并给出唯一的加氢产物,络合物中的N/Pd原子比、反应温度以及不同底物对反应速度的影响也被报道.     

New palladium (II) complexes containing phosphine‐nitrogen ligands and their use as catalysts in aminocarbonylation reaction

Aminocarbonylation of aryl halides, homogeneously catalysed by palladium, is an efficient method that can be employed for obtaining amides for pharmaceutical and synthetic applications. In this work, palladium (II) complexes containing P^N ligands were studied as catalysts in the aminocarbonylation of iodobenzene in the presence of diethylamine. Two types of systems were used: a palladium (II) complex formed in situ; and one prepared prior to the catalytic reaction. In general, the palladium complexes studied achieved high conversions in an average reaction time of less than 2 hr, which is less than that for the standard system (Pd (II)/PPh₃) used. The pre‐synthesized complexes were faster than their in situ counterparts, as the latter require an induction time to form the Pd/P^N species. The structure and electronic properties of the ligand P^N can influence both the activity and the selectivity of the reaction, stabilizing the acyl‐palladium intermediates formed in a better manner.     

Synthesis,characterization, and catalytic ethylene oligomerization of pyridine-imine palladium complexes

Two neutral five-membered pyridine-imine palladium complexes with the bulky dibenzhydryl (CH(Ph)2) substituted aniline were synthesized and fully characterized by nuclear magnetic resonance (NMR) and X-ray crystal diffraction.Well-defined cationic palladium complexes were further obtained by treatment of chloromethylpalladium complexes with sodium tetrakis(3,5-bis(trifluoromethyl)phenyl)borate (NaBArF) in CH3CN.Cationic palladium complexes were capable of catalyzing ethylene oligomerization without any cocatalysts.The influences of catalyst structure,reaction temperature,and ethylene pressure on ethylene oligomerization were studied in detail.The introduction of bulky benzhydryl (CH(Ph)2) on the ortho position of the aniline moiety enhanced catalytic activity,thermal stability of the catalyst,and molecular weight of the obtained products.Highly branched oligomers with molecular weights of 600-800 g/mol and narrow polydispersities (1.03-1.12) were produced.     

A novel amphiphilic pincer palladium complex: design, preparation and self-assembling behavior

Amphiphilic pincer palladium complexes bearing hydrophilic and hydrophobic side chains on the planar NCN palladium pincer backbone were designed and prepared via the ligand introduction route. The complexes self-assembled under aqueous conditions to form vesicles with bilayer membranes containing palladium species. The catalytic activity of the vesicles in the Miyaura-Michael reaction in water was investigated.     

2-(N-Alkylcarboxamide)-6-iminopyridyl palladium and nickel complexes: coordination chemistry and catalysis

The 2-(N-alkylcarboxamide)-6-iminopyridine ligands (L1-L7) can bind as either mono-anionic tridentate N^N^N ligands on reaction with PdCl(2)(CH(3)CN)(2), to form complexes LPdCl (C1-C7), or as neutral tridentate N^N^O ligands with NiCl(2)·6H(2)O, to produce complexes LNiCl(2) (C8-C14). All metal complexes were characterized by IR spectroscopy and elemental analysis, and in the case of the palladium complexes, by (1)H and (13)C NMR spectroscopy. The crystal structures of C3, C4, C6, C10, and C12 were determined by X-ray crystallography, and revealed a distorted square geometry around the palladium centre, whereas for nickel, a distorted square-pyramidal geometry was adopted. The representative palladium complex (C3) was further reacted with AgBF(4) in acetonitrile affording the salt [L3Pd(CH(3)CN)][BF(4)] (C15) and the structure of this was confirmed by single-crystal X-ray diffraction. By contrast, carrying out the reaction in dichloromethane rather than acetonitrile, in the presence of malononitrile (CNCH(2)CN), resulted in the formation of the bimetallic palladium complex [L3Pd(CNCH(2)CN)PdL3]·2[BF(4)] (C16). Upon activation with diethylaluminium chloride, all the nickel complexes showed high activity for ethylene dimerization. Furthermore, the palladium complexes exhibited good activities in the vinyl-polymerization of norbornene upon activation with MAO.     

NCN pincer palladium complexes: their preparation via a ligand introduction route and their catalytic properties

A wide range of NCN pincer palladium complexes, [4-tert-butyl-2,6-bis(N-alkylimino)phenyl]chloropalladium (alkyl = n-butyl, benzyl, cyclohexyl, tert-butyl, adamantyl, phenyl, 4-methoxyphenyl), were readily prepared from trans-(4-tert-butyl-2,6-diformylphenyl)chlorobis(triphenylphosphine)palladium via dehydrative introduction of the corresponding alkylimino ligand groups (ligand introduction route) in excellent yields (71-98%). NMR studies on this route for forming pincer complexes revealed the intermediacy of [4-tert-butyl-2,6-bis(N-alkylimino)phenyl]chlorobis(triphenylphosphine)palladium which is in equilibrium with the corresponding NCN pincer complexes via coordination/dissociation of the intramolecular imino groups and triphenylphosphine ligands. A series of chiral NCN pincer complexes bearing pyrroloimidazolone units as the trans-chelating donor groups, [4-tert-butyl-2,6-bis{(3R,7aS)-2-phenylhexahydro-1H-pyrrolo[1,2-c]imidazol-1-on-3-yl}phenyl]chloropalladium, were also prepared from the same precursor via condensation with proline anilides in high yields. The catalytic properties of the NCN imino and the NCN pyrroloimidazolone pincer palladium complexes were examined in the Heck reaction and the asymmetric Michael reaction to demonstrate their high catalytic activity and high enantioselectivity.     

Synthesis and Catalytic Properties of Di- and Trinuclear Palladium Complexes with PCP-Pincer Ligands

Linear and branched conjugated pincer ligands having Ph₂P groups were synthesized: 3,3',5,5'- tetrakis(diphenylphosphinomethyl)diphenylacetylene, 3,3',5,5'-tetrakis(diphenylphosphinomethyl)diphenyldi- acetylene, 1,3,5-tris[3,5-bis(diphenylphosphinomethyl)phenylethynyl]benzene, and hexakis[3,5-bis(diphenylphosphinomethyl)phenylethynyl]benzene. Palladation of these ligands by heating with Pd(BF₄)₂(MeCN)₄ in boiling acetonitrile gave the corresponding di- and trinuclear ionic pincer palladium complexes. No individual complex was obtained from hexakis[3,5-bis(diphenylphosphinomethyl)phenylethynyl]benzene. The ionic com- plexes were converted into the corresponding chloride complexes by treatment with sodium chloride in a mixture of water with methylene chloride. The structure of the ionic palladium complex with 3,3',5,5'-tetrakis(diphenylphosphinomethyl)diphenylacetylene was established by X-ray analysis. The obtained palladium complexes exhibited a considerable catalytic activity in the Heck reaction of iodobenzene with ethyl acrylate and in the Michael addition of ethyl cyanoacetate with methyl vinyl ketone. The catalytic activity per palladium atom decreases as the number of palladium atoms in the complex increases.     

Catalytic activity of palladium(II) diaminocarbene complexes in the Sonogashira and Suzuki reactions

Palladium(II) complexes with chelating and non-chelating diaminocarbene ligands were assessed as catalysts in the cross-coupling reactions of haloarenes with oct-1-yne (Sonogashira reaction) and phenylboronic acid (Suzuki reaction). Both complexes exhibited a higher catalytic activity than traditional phosphine ligandbased systems in the Sonogashira reaction, and they ensured cross-coupling not only with iodoarenes but also with bromoarenes activated by electron-withdrawing substituents. The catalytic activities of the examined complexes in the Suzuki reaction were appreciably different: the palladium(II) complex with the chelating ligand turned out to be considerably less active than the complex with the non-chelating ligand.     

Double Carbonylation of Organohalogen Compounds Catalyzed by Polymer-Bound Palladium Complexes

Palladium complex-catalyzed double carbonylation is a recently discovered reaction in organotransition metal chemistry. In this paper, some polymer-bound palladium complexes-polystyrylphosphine-palladium(0) complexes, poly-2-vinylpyridine-palladium(II) complexes, and poly-2-Af-vinylpyrrolidone-palladium(II) complexes have been prepared and characterized. The complexes were tested as catalysts in the double carbonylation reaction. Among these catalysts, polystyrylphos-phine-palladium(0) complexes showed good activity and selectivity, and can be easily recovered and reused. The influence of experimental parameters was investigated as well.     

Preparation and characterization of 4-dimethylaminopyridine-stabilized palladium nanoparticles

4-Dimethylaminopyridine (DMAP)-stabilized palladium nanoparticles with a mean diameter of 3.4 +/- 0.5 nm are prepared from the aqueous phase reduction of Na2PdCl4 using NaBH4 in the presence of DMAP. TEM and UV-vis spectroscopy characterization of the nanoparticle dispersion shows no obvious change in the nanoparticles several months after preparation. 1H NMR spectroscopy of the nanoparticles shows that the nanoparticle dispersion also contains a boron/DMAP complex and two palladium/DMAP complexes. One of the palladium complexes crystallizes out of the dispersion and is identified as Pd(DMAP)4(OH)2 by X-ray crystallography. Following extensive analysis, it is believed that the palladium/DMAP complexes are formed following the oxidation of the palladium nanoparticles. The prepared nanoparticle dispersion promotes selective hydrogen/deuterium (H/D) exchange on the carbon atoms alpha to the endocyclic nitrogen atom on the DMAP-stabilizing ligands through reaction with D2O. This activity is attributed to the presence of the nanoparticles rather than to the presence of the oxidized palladium/DMAP complexes.     

Preparation and characterization of PEPPSI-palladium N-heterocyclic carbene complexes using benzimidazolium salts catalyzed Suzuki–Miyaura cross coupling reaction and their antitumor and antimicrobial activities

New palladium complexes were efficiently synthesized from the reaction of benzimidazolium salts 2a–e, potassium carbonate (K₂CO₃) and palladium chloride (PdCl₂) in pyridine (for 3a–e). The catalytic activity of these complexes in a catalytic system including palladium complexes and K₂CO₃ in DMF-H₂O was evaluated in Suzuki–Miyaura cross-coupling reactions of aryl bromides and chlorides with phenylboronic acid. Our novel complexes show excellent catalytic activities with high turnover numbers (TON) and high turnover frequencies (TOF) (e.g. for the Suzuki–Miyaura reaction: TON up to 370 and TOF up to 123.3?h^?1). Both benzimidazolium salts 2a–e and complexes 3 have been characterized using spectroscopic data and elemental analysis. The antimicrobial activity of the N-heterocyclic carbene palladium complexes 3a–e varies with the nature of the ligands. Also, the IC₅₀ values of both, complexes (3a–e) and benzimidazoles 2a–e, have been determined. In addition, the new palladium complexes were screened for their antitumor activity. Complexes 3e and 3d exhibited the highest antitumor effect with IC₅₀ values 6.85?μg/mL against MCF-7 and 10.75?μg/mL against T47D, respectively.     

N,N′-bridged binuclear NHC palladium complexes: A combined experimental catalytic and computational study for the Suzuki reaction

This work examines how N-donor bridged spacer ligands affect N-heterocyclic carbene (NHC) palladium complexes catalytic activities for Suzuki coupling reaction. Different degrees of structural flexibility binuclear NHC palladium complexes were synthesized. The more flexible nitrogen-based alkyl chain ligand shows similar performance with cycloamine counterparts in the Suzuki coupling reaction. Suzuki coupling examples were used in air and ambient temperature to reach moderate to completion yields in short time. Density functional theory calculations showed that the chelate effect, associated with a single Pd complex mechanism, plays a fundamental role in the pre-catalysis stage, supporting a reasonable of the kinetic activity observed experimentally.     

Insertion of CO2 into a palladium allyl bond and a Pd(II) catalysed carboxylation of allyl stannanes

The complex 2,6-bis[(di-t-butylphosphino)methyl]phenyl allyl palladium (PCP(tBu)Pd-allyl, 3) reacts with CO(2) in a very fast insertion reaction to give the corresponding butenoate complex. The reaction is thought to occur via a cyclic six-membered transition state (7), where the gamma-carbon of the allyl group is linked up with the CO(2)-carbon. A group of related PCP complexes were investigated as catalysts for the carboxylation of tributyl(allyl)stannane. A catalytic cycle is proposed for this reaction where the rate determining step is the transmetallation between tin and palladium. The carboxylation reaction is faster using less sterically crowded catalysts whereas the electron richness of the palladium complexes seems less important for reactivity. Thus, there was no apparent difference in reactivity between 2,6-bis[(di-phenylphosphino)methyl]phenyl palladium triflouroacetate (13) and resorcinolbis(diphenyl)phosphinite palladium triflouroacetate (10). Both of these complexes give high turnovers for the carboxylation of tributyl(allyl)stannane (80% in 16 h using a ca. 5% catalyst loading and 4 atm CO(2) pressure). On the other hand complex 3 was inactive in the catalytic carboxylation reaction.     

Palladium-catalyzed addition of arylboronic acids to aldehydes

[reaction: see text] Arylboronic acids react with aldehydes in the presence of a base and a catalytic amount of a palladium(0) complex with chloroform, affording the corresponding secondary alcohols in good yields. General palladium complexes have no catalytic activity without chloroform. Chloroform is essential for this reaction, and palladium complex that was prepared from Pd(PPh3)4 with CHCl3 showed good catalytic acitivity as well.     

Synthesis,Structure, and Reactivity of Ferrocenyl‐NHC ­Palladium Complexes

palladium complexes of ferrocenyl‐functionalized N‐heterocyclic carbenes with different substituents were synthesized. The molecular structures of selected complexes were determined by X‐ray diffraction and show a pseudo‐square‐planar structure with a central palladium atom surrounded by carbene, pyridine, and two chloride ligands. The influence of the different substituents on the structure and reactivity of the complexes was studied. The catalytic properties of the complexes were investigated in the Larock indolization reactions of 2‐bromoanilines with diphenylacetylene. Their performances slightly varied in this reaction, but the complex with mesityl substituent showed the best activity.     

Hydrogenation Catalysts Based on Polynuclear Palladium Complexes with Organophosphorus Ligands

A new procedure is proposed for the preparation of hydrogenation catalysts. This procedure includes the synthesis of cyclic tetranuclear palladium complexes with bridging diphenylphosphide ligands followed by a reaction with Pd(CH₃COO)₂ in the presence of hydrogen to form nanosized particles. In the test catalysts, the ensembles of palladium atoms (or palladium hydrides) immobilized on supramolecular structures formed by the association of phosphinidene and phosphide complexes of palladium are responsible for the catalytic activity.     

Insights into the Heck reaction with PCP pincer palladium(II) complexes

[reaction: see text] The Heck reaction of phenyl halides with styrene using a series of related PCP pincer palladium(II) complexes was studied in order to evaluate the effect of ligand structure and electronics on the catalytic activity and to investigate the nature of the catalyst species. We suggest these pincer complexes are precatalysts for highly active forms of metallic palladium. This conclusion is based on kinetic studies (induction periods, sigmoidal kinetics), Hg drop tests, quantitative poisoning experiments, and NMR studies.