Pd(0)‐ S‐propyl‐2‐aminobenzothioate immobilized onto functionalized magnetic nanoporous MCM‐41 as efficient and recyclable nanocatalyst for the Suzuki,Stille and Heck cross coupling reactions

The present work describes the use of Pd(0)‐ S‐propyl‐2‐aminobenzothioate Complex immobilized onto functionalized magnetic nanoporous MCM‐41(Fe₃O₄@MCM‐41@Pd‐SPATB) as efficient and recyclable nano‐organometallic catalyst for C–C bond formation between various aryl halides with phenylboronic acid (Suzuki reaction), aryl halides with triphenyltin chloride (Stille reaction), and aryl halides with n‐butyl acrylate (Heck reaction). All the reactions were carried out in PEG‐400 as green solvent with short reaction time and good to excellent yields. This catalyst was characterized by FT‐IR spectroscopy, XRD, TGA, VSM, ICP‐OES, TEM, EDX and SEM techniques. Ease of operation, high efficiency, recovery and reusability for five continuous cycles without significant loss of its catalytic activities or metal leaching are the noteworthy features of the currently employed heterogeneous catalytic system.     

MCM‐41‐supported mercapto palladium(0) complex: an efficient and recyclable catalyst for the heterogeneous Stille coupling reaction

The Stille cross‐coupling reaction of organostannanes with aryl halides was achieved in the presence of a catalytic amount of MCM‐41‐supported mercapto palladium(0) complex (1 mol%) in DMF? H₂O (9:1) under air atmosphere in good to high yields. This MCM‐41‐supported palladium catalyst can be reused at least 10 times without any decrease in activity. Copyright © 2009 John Wiley & Sons, Ltd.     

一种经MCM-41负载双齿膦钯(0)配合物催化的羰基化Suzuki偶联合成二芳酮的新途径

在催化量的MCM-41负载双齿膦钯(0)配合物存在下,芳基碘化物和芳基硼酸、一氧化碳在常压下能顺利进行羰基化Suzuki偶联反应,高产率地生成了各种二芳酮化合物。MCM-41负载双齿膦钯(0)配合物具有比PdCl2(PPh3)2 更高的活性和选择性,且可回收再用10次其活性基本不变,为各种功能化二芳酮的合成提供了方便实用的新途径。     

The first MCM-41-supported thioether palladium(0) complex: A highly active and stereoselective catalyst for Heck arylation of olefins with aryl halides

The first MCM-41-supported thioether palladium(0) complex has been synthesized from 3-(2-cyanoethylsulfanyl)propyltriethoxysilane via immobilization on MCM-41, followed by reacting with palladium chloride, and then the reduction with hydrazine hydrate. It was found that this complex has not only high activity and stereoselectivity for arylation reaction of conjugated alkenes with aryl iodides or activated aryl bromides, but also can efficiently catalyze the arylation reaction of conjugated alkenes with unactivated bromoarenes. This polymeric palladium catalyst can be easily recovered from the products and reused at least 10 times without loss of activity.     

Efficient catalysis of Ullmann-type arylation reactions by a novel trinuclear copper(I) complex with a chelating tricarbene ligand

A novel trinuclear copper(I) complex with a chelating tricarbene ligand is shown to be an efficient catalyst for the arylation of different classes of compounds containing N-H or O-H functions. Different kinds of azole rings (pyrazole, imidazole, 1,2,4-triazole) can be arylated with comparable efficiencies at relatively mild temperatures (100 °C). The catalyst activates aryl iodides, bromides and even chlorides for the reaction. An unusually strong influence of the nature of the aryl substituent on the reaction yield is observed. The synthetic protocol can be extended to other substrate classes, such as phenols and amides, although the catalytic efficiency with amides is significantly reduced.     

全氟磺酸钯树脂催化的芳基卤与烯烃或炔烃的反应

全氟离子交换树酯[Perfluoririnted ion-exchange resin(PFIER)]由于其化学稳定性极好,因此用它作为高分子载体具有独特的优越性。全氟磺酸树脂作为强酸性催化剂,在有机合成中的应用已有广泛的研究。近年来,用高分子载体催化剂代替传统的小分子催化剂进行反应,由于后处理和催化剂回收方便而受到重视。但是,用含金属或金属阳离子的离子交换树脂作为金属催化剂参与的反应却研究得很少。     

A phosphine‐free heterogeneous Suzuki–Miyaura reaction of aryl bromides catalyzed by MCM‐41‐supported tridentate nitrogen palladium complex under air

MCM‐41‐supported tridentate nitrogen palladium(II) complex [MCM‐41‐3 N‐Pd(II)] was conveniently synthesized from commercially available and cheap 3‐(2‐aminoethylamino)propyltrimethoxysilane via immobilization on MCM‐41, followed by reacting with pyridine‐2‐carboxaldehyde and PdCl₂. It was found that this palladium complex is an excellent catalyst for the Suzuki–Miyaura coupling reaction of aryl bromides on two points: (i) the use of 5 × 10⁻⁴ mol equiv. of MCM‐41‐3 N‐Pd(II) under air afforded the coupling products efficiently after easy workup; (2) the catalyst can be reused many times without loss of catalytic activity. Copyright © 2011 John Wiley & Sons, Ltd.     

Nano tetraimine Pd(0) complex as an efficient catalyst for phosphine‐free Suzuki reaction in water and copper‐free Sonogashira reaction under aerobic conditions

A nano tetraimine Pd(0) complex catalyst was successfully used as an efficient heterogeneous catalyst for the phosphine‐free palladium‐catalysed Suzuki coupling reaction in water at 80 °C. This nano tetraimine Pd(0) complex was also used for copper‐free Sonogashira reaction in dimethylformamide at 100 °C. The catalyst was easily recovered from the reaction mixture by centrifugation and reused for at least six cycles without any significant loss in its catalytic activity. Analysis of the reaction mixture using inductively coupled plasma analysis showed that leaching of palladium from the catalyst was negligible. The reactions can be performed efficiently for aryl iodides, bromides and also chlorides. Copyright © 2016 John Wiley & Sons, Ltd.     

无配体Pd/LDH-F催化剂在Heck和Suzuki反应中的应用

 以氟离子插层的水滑石LDH-F为载体,用逐滴浸渍法制备了新型Pd/LDH-F催化剂,并用其催化溴代芳烃的Heck和Suzuki偶联反应. 用X射线衍射表征了催化剂的晶相,以等离子体发射光谱测定了溶剂中钯的流失量. 结果表明,对于Heck反应,在无配体存在和低钯用量(Pd/溴代芳烃摩尔比为0.001)的情况下, Pd/LDH-F的催化性能优于其它载体负载的Pd催化剂,显示出很高的催化活性和选择性. 在140 ℃和12 h的条件下, Pd/LDH-F催化溴苯与苯乙烯Heck反应产物的收率可达86％, 反应后催化剂经过分离,可循环使用四次其催化活性基本不变. 在DMF/水摩尔比为0.5的混合溶剂中,在室温和3 h 的条件下, Pd/LDH-F (Pd/溴代芳烃摩尔比为0.005)催化溴苯与苯基硼酸盐的Suzuki反应中,目标产物收率为99%.     

NiCl2(dppp)]-catalyzed cross-coupling of aryl halides with dialkyl phosphite, diphenylphosphine oxide, and diphenylphosphine

We present a general approach to C-P bond formation through the cross-coupling of aryl halides with a dialkyl phosphite, diphenylphosphine oxide, and diphenylphosphane by using [NiCl(2) (dppp)] as catalyst (dppp=1,3-bis(diphenylphosphino)propane). This catalyst system displays a broad applicability that is capable of catalyzing the cross-coupling of aryl bromides, particularly a range of unreactive aryl chlorides, with various types of phosphorus substrates, such as a dialkyl phosphite, diphenylphosphine oxide, and diphenylphosphane. Consequently, the synthesis of valuable phosphonates, phosphine oxides, and phosphanes can be achieved with one catalyst system. Moreover, the reaction proceeds not only at a much lower temperature (100-120?°C) relative to the classic Arbuzov reaction (ca.?160-220?°C), but also without the need of external reductants and supporting ligands. In addition, owing to the relatively mild reaction conditions, a range of labile groups, such as ether, ester, ketone, and cyano groups, are tolerated. Finally, a brief mechanistic study revealed that by using [NiCl(2) (dppp)] as a catalyst, the Ni(II) center could be readily reduced in situ to Ni(0) by the phosphorus substrates due to the influence of the dppp ligand, thereby facilitating the oxidative addition of aryl halides to a Ni(0) center. This step is the key to bringing the reaction into the catalytic cycle.     

Highly effective activation of aryl chlorides for Suzuki coupling in aqueous media using a ferrocene-based Pd(II)–diimine catalyst

The Suzuki coupling of aryl chlorides with boronic acids using a ferrocene-containing Pd(II)–diimine complex as catalyst, in aqueous media, under microwave heating is reported. A small amount of the catalyst (0.1%) was found to be highly effective for coupling unactivated aryl chlorides with boronic acids to form sterically hindered ortho-substituted biaryls. The same catalyst also enabled the coupling of aryl bromides and iodides with various boronic acids in very high yields. The catalyst is air stable and the catalytic reaction can be completed in 15 min.     

Recyclable N-heterocyclic carbene/palladium catalyst on graphene oxide for the aqueous-phase Suzuki reaction

Graphene oxide (GO) was functionalized with a N-heterocyclic carbene (NHC) precursor, 3-(3-aminopropyl)-1-methylimidazolium bromide ([APMIm][Br]) for the immobilization of palladium catalyst. The GO-supported NHC precursor (IMGO) formed a stable complex with Pd(OAc)₂ (GO–NHC–Pd), which showed excellent catalytic activity and fast reaction kinetics in the aqueous-phase Suzuki reaction of aryl bromides and chlorides at relatively mild conditions (1 h at 50 °C). The GO–NHC–Pd catalyst was reused several times without any loss of its catalytic activity in the Suzuki reaction of aryl bromide.     

Mesoporous Silica MCM‐41 Supported N‐Heterocyclic Carbene‐Pd Complex for Heck and Sonogashira Coupling Reactions

Heterocyclic carbene‐Pd complex was anchored onto the mesoporous silica MCM‐41 which exhibits high catalytic activity in Heck reaction under phosphine free reaction conditions for the reaction of iodo/bromoarenes with olefinic compounds such as butyl acrylate, isopropyl acrylate and styrene. This catalytic system also showed high activity for Sonogashira coupling reaction of various aryl halides under copper, phosphine and solvent‐free reaction conditions. The air and thermally stable catalyst were reused several times without significant loss of its activity. High efficiency of the catalyst along with its recycling ability and the rather low Pd‐loading demonstrated in both Heck and Sonogashira coupling reactions are the merits of the presented catalyst system.     

Phosphine-free polystyrene-supported palladium(II) complex as an efficient catalyst for the Heck and Suzuki coupling reactions in water

A palladium complex, 1-phenyl-1,2-propanedione-2-oxime thiosemi-carbazone-functionalized polystyrene resin supported Pd(II), is found to be a highly active catalyst for the Heck reaction of methyl acrylate with aryl halides and Suzuki reaction of phenylboronic acid with aryl iodides and bromides, giving excellent yields. The reactions were performed under phosphine-free conditions in an air atmosphere. The palladium catalyst is easily separated, and can be reused for several times without a significant loss in its catalytic activity.     

One-pot synthesis of α-aminonitriles using a highly efficient and recyclable silica-based scandium (III) interphase catalyst

Both aryl and alkyl imines, which formed in situ from aldehydes and amines undergo smooth nucleophilic addition with trimethylsilyl cyanide in the presence of a catalytic amount of a silica-based scandium (III) interphase catalyst under mild reaction condition to furnish the corresponding α-aminonitriles in good to excellent yields. The catalyst shows high thermal stability (up to 300 °C) and it could also be recovered and reused for at least 6 reaction cycles without considerable lose of its reactivity.     

Chitosan-supported palladium(0) catalyst for microwave-prompted Suzuki cross-coupling reaction in water

A chitosan-supported palladium (Pd) (0) catalyst was prepared by simple adsorption of palladium(II) ion onto chitosan beads and a subsequent reduction process. To maintain mechanical stability, the chitosan-supported palladium(0) catalyst was cross-linked with either glutaraldehyde or diglycidyl ether polyethylene glycol. The catalysts were utilized for the Suzuki cross-coupling reaction in water. The catalyst, in the presence of a tetrabutylammonium bromide (TBAB) additive, showed excellent catalytic activity in microwave-prompted Suzuki cross-coupling reactions using various aryl halides and boronic acids. In addition, the catalyst was successfully reused up to five times without significant loss of catalytic activity.     

Novel monoligated imine–Pd–NHC complexes: extremely active pre-catalysts for Suzuki–Miyaura coupling of aryl chlorides

Novel monoligated imine–Pd–NHC pre-catalysts with extremely high activity for the coupling of aryl chlorides and aryl boronic acids have been well explored. Three diffident catalysts could be obtained through one reaction. Changes in imine ligands would lead to remarkable variation on catalytic activity. Under mild reaction conditions, high reaction yields were achieved. A wide range of biphenyls could be efficiently obtained at ultra low catalyst loadings of 0.005 mol %.     

A highly active and stable imidazolidine-bridged N,O-donor ligand for efficient palladium catalyzed Suzuki–Miyaura reactions in water

Abstract  

We have used the sterically hindered N,O-donor ligand 1,4-bis(2-hydroxy-3,5-di-tert-butyl-benzyl)-imidazolidine with various Pd salts as a catalyst for the Suzuki reaction. This system exhibited excellent catalytic activity in Suzuki reactions of arylboronic acids with aryl halides, including aryl iodides, aryl bromides and activated aryl chlorides, using aqueous methanol as solvent under mild conditions. The catalytic system can be reused once without significant loss of activity.     

A new air and moisture stable robust bio‐polymer based palladium catalyst for highly efficient synthesis of biaryl compounds

The designs of robust natural polymer based catalysts are important for catalytic systems in the view of industrial purposes and green chemistry. In this study, a new air and moisture stable robust starch‐based Pd(II) catalyst was designed and characterized with different analytical techniques. Catalytic behavior of the prepared robust palladium(II) catalyst was investigated in the Suzuki coupling reactions of aryl iodides, aryl bromides and aryl chlorides with phenyl boronic acid under microwave irradiation using very short reaction time. Sustainability and reusability of the catalyst was also explored under benign conditions. As a result of the catalytic tests, the green catalyst gave excellent biphenyl yields, TONs and TOFs with very low catalyst loading. More importantly, the robust catalyst has showed that it can be reused several times without important loses from its activity in the coupling reactions. The study showed that the robust starch‐based Pd(II) catalyst had more advantages than other catalysts reported in the literature due to its economic, sustainable, thermal durable, environmentally friendly and practice properties.     

An efficient heterogeneous cross‐coupling of aryl iodides with diphenylphosphine catalyzed by copper (I) immobilized in MCM‐41

The heterogeneous cross‐coupling reaction of aryl iodides with diphenylphosphine was achieved in toluene at 115 °C in the presence of 10 mol% of phenanthroline‐functionalized MCM‐41‐supported copper (I) complex (Phen‐MCM‐41‐CuI) with Cs₂CO₃ as base, yielding various unsymmetric triarylphosphines in good to excellent yields. This protocol can tolerate a wide range of functional groups and does not need the use of expensive additives or harsh reaction conditions. This heterogeneous Cu (I) catalyst exhibited the same catalytic activity as homogeneous CuI/Phen system, and could easily be recovered by a simple filtration of the reaction solution and recycled up to seven times without significant loss of activity.