Isotachophoretic determination of carboxylic acids in biodegradation samples

In the current study a method of isotachophoretic separation of selected carboxylic acids was developed. The method was used for the determination of carboxylated oligo(ethylene glycol)s and their degradation products in biodegradation tests of PEG 250 DA [a mixture of dicarboxylated oligo(ethylene glycol)s]. Two tests were performed in the studies: the Organization for Economic Cooperation and Development (OECD) screening test and the river water die-away test. Both the biodegradation tests proved relatively fast biodegradation of the studied compounds. In the OECD screening test the biodegradation was faster than in the river water die-away test which can be ascribed to a higher concentration of bacteria in the biodegradation liquor. The minimal sample pretreatment and relatively low cost of analysis by the isotachophoretic method used here make it a good alternative to existing methods of carboxylic acids analysis.     

Isotachophoretic separation of selected imidazolium ionic liquids

Results of determination of selected imidazolium ionic liquids by isotachophoresis (ITP) with conductometric detection was presented. The effects of the molar mass of different ionic liquids on electrophoretic mobility was observed. The presented method was validated and basic validation parameters were determined. Limit of detection (LOD) in a 10 and 25 ng/L for anions and cations, respectively, is very satisfied. Thanks to its low cost and high rate, the presented method can be used in qualitative routine analysis as an alternative technique to liquid chromatography.     

Isotachophoretic separation of alkylsulfonates and determination of methanesulfonic acid as main component and as trace component in pharmaceutical drug substances

Alkylsulfonates from methanesulfonic acid to decanesulfonic acid were separated by isotachophoresis with conductivity detection in a common electrolyte system at pH 4.8. The electrolyte system consisted of 10 mM HCl buffered with epsilon-aminocaproic acid (pH 4.8) and 0.1% methylhydroxyethylcellulose (MHEC) acting as the leading electrolyte. The terminating electrolyte was 20 mM caproic acid also containing 0.05% MHEC. Current settings of 250 microA for the first and 50 microA for the second capillary were applied. On one hand, the method was applied to the determination of the content of methanesulfonate as the salt forming agent (mesilate) in a recently registered drug substance. The results obtained by ITP were compared with an orthogonal titration method. On the other hand, due to the column-coupling configuration of the electrophoretic instrument, the method could be extended to the trace determination in the ppm range in order to monitor methanesulfonic acid as an impurity in a drug substance. The validation confirmed the linearity of the method between 1 and 10 mg/l, limits of detection and quantification below 1 mg/l, recovery rates from 92.4 to 95.4%, and repeatability with a R.S.D. of 3.8% (six runs with a 4 mg/l spiked sample). Finally, three batches of a newly produced drug substance could be checked for methanesulfonic acid giving results of below 0.0014% (concentration related to the drug substance).     

Isotachophoretic determination of theanine

Free amino acids, the key quality components of tea, are contained in higher amounts in higher grade teas. Among free amino acids in tea, the content of theanine, which is the amino acid of the highest amount, shows high correlation to the price of green tea. A capillary isotachophoresis (CITP) method was developed for the analysis of L-theanine in tea and food supplements. The optimized electrolyte system was following: 0.01 mol/l HCl + 0.02 mol/l TRIS + 0.05% HEC (leading electrolyte), 0.01 mol/L-valine + barium hydroxide to pH 10 (terminating electrolyte). Good separation of L-theanine from other components of sample was achieved within 20 min. Method characteristics, i.e., linearity (0–200 mg/l), accuracy (99 ± 2 %), intra-assay (1.5 %), quantification limit (2 mg/l), and detection limit (0.7 mg/l) were determined. Sufficient sensitivity, low labouriousness (extraction only) and low running cost are important attributes of this method. It was proved that the developed method is suitable for the routine analysis of L-theanine in green tea and food supplements containing green tea extract.     

Isotachophoretic determination of 3-methylhistidine.

A capillary isotachophoretic (cITP) method to determine the concentration of 3-methylhistidine (3-MeHis) in meat and meat products is described. A clear separation of the 3-MeHis from histidine, 1-methylhistidine and other components of acidic sample hydrolyzate was achieved within 20 min. Method characteristics (linearity, accuracy, precision and detection limit) were determined. Low laboriousness, sufficient sensitivity and low running cost are the important attributes of cITP method. The developed method was successfully applied to analyses of real samples and used for the determination of lean meat content in meat and meat products.     

Isotachophoretic determination of creatinine in meat and meat products

A capillary isotachophoretic method (CITP) to determine the creatinine concentration in meat and meat products is described. A clear separation of the creatinine from other components of an acidic extract of sample was achieved within 20 min. Method characteristics (linearity, accuracy, precision and detection limit) were determined. The developed method was successfully applied to analyze real samples and to determine creatinine and creatine content (indirect determination after acidic hot extraction) in meat and meat products.     

Isotachophoretic determination of amines from workroom air

Eight different isotachophoretic systems for the analysis of 27 aliphatic amines are described. Complete methods including sampling and analysis procedures for the determination of eight amines in workroom air are also given. Different systems for the generation of gaseous amine standards in air are discussed, as well as sampling with washing bottles, adsorption tubes and liquid dosimeters. The methods were used in industrial environments. The isotachophoretic method is compared with gas and high-performance liquid chromatography.     

Electrokinetic supercharging in CE for the separation and preconcentration of barbiturate drugs in urine samples

Three barbiturate drugs, barbital, phenobarbital, and secobarbital were separated and analyzed by electrokinetic supercharging. The influence of different parameters on electrokinetic supercharging performance was evaluated using both univariated and multivariated optimization processes. The parameters studied were sample pH, concentration, and length of the leading and terminating electrolytes, electrokinetic injection of the sample and composition and hydrodynamic injection of the solvent plug. The leading electrolyte (50 mM NaCl) was hydrodynamically injected (50 mbar × 120 s) prior to the sample that was adjusted to pH 9.6 and electrokinetically injected at ?8.5 kV for 300 s. The terminating electrolyte (100 mM of 2‐(cyclohexylamino) ethanesulphonic acid) was then hydrodynamically injected (50 mbar × 140 s). The results showed that this strategy enhanced detection sensitivity around 1050‐fold compared with normal hydrodynamic injection, providing detection limits ranging between 1.5 and 2.1 ng/mL for standard samples with good repeatability in terms of peak area (values of relative standard deviation, %RSD < 3). The applicability of the optimized method was demonstrated by the analysis of human urine samples spiked with the studied compounds at different concentration levels and further liquid–liquid extraction step. The estimated detection limits obtained in the urine samples extract ranged between 8 and 15 ng/mL.     

Isotachophoretic determination of 2-5A phosphodiesterase

Together with 2-5A synthetase and ribonuclease L, 2-5A phosphodiesterase belongs to the 2-5A system, which plays an important role in the action of interferon. Analytical capillary isotachophoresis was used for the determination of 2-5A phosphodiesterase activity. Enzyme assay was optimized using snake venom phosphodiesterase as a source of 2-5A phosphodiesterase activity. The 2-5A trimer core was used as a substrate. Enzyme activity was determined in time- and concentration-dependent reactions. In addition, 2-5A phosphodiesterase activity was determined in lysates of mononuclear blood cells.     

A miniaturised isotachophoresis method for magnesium determination

The use of malonic acid as a complexing agent has enabled a new method to be devised to allow the determination of magnesium to be made using miniaturised isotachophoresis. Using a leading electrolyte of 10 mmol L⁻¹ caesium hydroxide and 2 mmol L⁻¹ malonic acid at pH 5.1 gave the method a high specificity towards magnesium. Investigations using a poly(methyl methacrylate) chip device with an integrated conductivity detector showed that no interference from calcium, strontium, barium and sodium should occur. The method was found to be linear over the range of magnesium concentrations from 0.625 to 75 mg L⁻¹ and the limit of detection was calculated to be 0.45 mg L⁻¹. Separations were demonstrated with water samples but the procedure should also be applicable to more complex sample matrices such as inorganic explosive residues, blood or urine.     

Isotachophoretic determination of naproxen in the presence of its metabolite in human serum

An isotachophoretic method with conductivity detection was developed to determine naproxen in the presence of its metabolite 6-O-desmethylnaproxen in human serum. The leading electrolyte contained 10 mM hydrochloric acid, beta-alanine, pH 4.0 and 0.1% methylhydroxypropylcellulose. The terminating electrolyte was 10 mM 2-(N-morpholino)ethanesulfonic acid-tris(hydroxymethyl)aminomethane, pH 6.9, containing 20% (v/v) of ethanol. Naproxen was determined in serum supernatant after simple deproteination of the sample with ethanol. The isotachophoretic results were compared with those obtained by synchronous fluorescence spectrometry.     

Isotachophoretic analysis of peptides. Selection of electrolyte systems and determination of purity

Capillary isotachophoresis (ITP) was applied to the qualitative and quantitative analysis of both natural and synthetic oligo- and polypeptides. Based on the mathematical model of acid-base equilibria for a general ampholyte, a procedure and a computer program for the calculation of the pH dependence of the effective and specific charge and effective mobility of peptides with known amino acid sequence were developed which allow the selection of electrolyte systems for peptide isotachophoretic analysis to be rationalized. Basic peptides (bovine pancreatic trypsin inhibitor, bull seminal isoinhibitors of trypsin, arginine vasopressin and adamantylamide-alanylisoglutamine) were analysed with a cationic ITP system at acidic pH. Neutral and acidic peptides (insulin, proinsulin, bull seminal isoinhibitors of trypsin, cow colostrum isoinhibitors of trypsin) were analysed with an anionic ITP system, mostly at alkaline pH. Peptide purity (electrophoretic homogeneity) was determined from the ITP degree of purity defined by a peptide itself and the zone length ratio of its admixtures. Enrichment of peptide in the sample during the purification procedure was measured by its zone length relative to unit mass of the amount of sample analysed.     

Precise determination of N‐acetylcysteine in pharmaceuticals by microchip electrophoresis

A novel microchip electrophoresis method for the rapid and high‐precision determination of N‐acetylcysteine, a pharmaceutically active ingredient, in mucolytics has been developed. Isotachophoresis separations were carried out at pH 6.0 on a microchip with conductivity detection. The methods of external calibration and internal standard were used to evaluate the results. The internal standard method effectively eliminated variations in various working parameters, mainly run‐to‐run fluctuations of an injected volume. The repeatability and accuracy of N‐acetylcysteine determination in all mucolytic preparations tested (Solmucol 90 and 200, and ACC Long 600) were more than satisfactory with the relative standard deviation and relative error values <0.7 and <1.9%, respectively. A recovery range of 99–101% of N‐acetylcysteine in the analyzed pharmaceuticals predetermines the proposed method for accurate analysis as well. This work, in general, indicates analytical possibilities of microchip isotachophoresis for the quantitative analysis of simplified samples such as pharmaceuticals that contain the analyte(s) at relatively high concentrations.     

Spectrophotometric determination of Isoproturon and Metoxuron using ethylacetoacetate and application to technical and formulation grade samples

A simple and rapid spectrophotometric method for the determination of Isoproturon and Metoxuron is described based on alkaline hydrolysis of the compounds to their corresponding primary amines, followed by diazotization and coupling with ethylacetoacetate in alkaline medium. The chromogenic species obeys Beer's law up to 15 and 9 mug ml(-1) for Isoproturon and Metoxuron respectively. The method is successfully applied for technical and formulation samples with RSD in the ranges 0.48-0.72, 0.86-1.32 and 0.66-0.74, 0.27-0.69 for technical and formulation grade samples of Isoproturon and Metoxuron respectively. The advantages over the earlier methods are discussed.     

Simultaneous determination of bromide and iodide ions by capillary isotachophoresis using quaternary ammonium salts

Bromide and iodide ions were determined simultaneously by capillary isotachophoresis using an aqueous electrolyte system; the separation principle was based on the ion-pairing equilibria between tetradecyldimethylbenzylammonium ion and these anions in the leading electrolyte. The interaction between iodide ion and tetradecyldimethylbenzylammonium ion was stronger than that for bromide ion. Thus complete separation of bromide and iodide ions could be obtained by using a leading electrolyte containing 1.5 mM tetradecyldimethylbenzylammonium ion. The pH of the leading electrolyte was adjusted to 5.0. The relative standard deviations of the zone length for bromide and iodide ions were 1.1 and 1.2%, respectively, when mixture of 3.0 mM of these ions was analysed. A 150-μl volume could be injected for the simultaneous determination of low concentrations of bromide and iodide ions.     

Photochemical-spectrofluorimetric method for the determination of benzoylurea insecticides: applications in river water samples and in technical formulations

Ultraviolet (UV) irradiation was used to obtain fluorescent photoproducts from four non-fluorescent benzoylurea (BU) insecticides (flufenoxuron (FLF), lufenuron (LUF), hexaflumuron (HF) and triflumuron (TRF)). The effect of solvent, pH (in aqueous solutions), organic solvent percentage and UV irradiation time on the excitation and emission wavelengths and fluorescence intensity were investigated. The largest fluorescence signals and the shortest UV irradiation time were obtained in methanol, ethanol and 2-propanol. Linear calibration graphs were established in the interval between 0.025 and 1.000 microg ml(-1) from FLF and TRF and between 0.050 and 1.000 microg ml(-1) from LUF and HF with regression coefficients larger than 0.99. A method based on the use of the first-derivative of the spectra of photoproducts was applied to the determination of BU insecticides in river water samples and in technical formulations. The mean recoveries ranged from 95.0% to 110.0% in river water samples and from 92.0% to 101.0% in technical formulations, according to the compound. A preconcentration step, using LLE, allowed to reach the concentration levels established by the EU directive for pesticides in drinking water.     

Isotachophoretic determination of phosphate splitting from Amifostine and p-nitrophenyl phosphate in serum and neuroblastoma cells.

Amifostine [WR-2721; H2N-(CH2)3-NH-(CH2)2-S-PO3H2] is used as a protecting agent in the chemotherapy of neuroblastoma. It is supposed that Amifostine will be transformed into its active form, the free thiol (WR-1065), easier by normal cells than by tumour cells. Analytical capillary isotachophoresis was used to determine the dephosphorylation of Amifostine in serum and on neuroblastoma cells and peripheral blood cells. Furthermore, the biological effects of Amifostine and its free thiol, on cell proliferation of neuroblastoma cells were measured in combination with Carboplatin. It was found that neuroblastoma cells did not split phosphate less efficiently than normal peripheral blood cells. Furthermore, neither Amifostine (as expected) nor the free thiol (not expected according to the theory) were able to inhibit the effects of Carboplatin. Therefore, the current hypothesis concerning the mode of action of Amifostine must be questioned.     

Isotachophoretic separation of cetyltrimethylammonium bromide

Capillary isotachophoresis (ITP), equipped with the conductivity detection, was tested for the separation of cetyltrimethylamonium (CTMA) bromide. To prevent adsorption of CTMA to the capillary walls, several neutral polymers and ethanol were added into the leading electrolytes. Unlike polymer additives, the CTMA free monomers and micelles, created as a result of the isotachophoretic concentration effect, were recognised in the presence of ethanol from 10 to 25% (v/v). At 30% of ethanol, only a single zone of CTMA monomer was registered because the micellization process did not take place under this condition.Employing an ITP apparatus in the column-coupling configuration, the operational system with 30% of ethanol was tested for the determination of CTMA in hair conditioners. The achieved detection limits were about 0.02 mM. Both model solutions and real samples of hair conditioners were analysed with the precision about R.S.D. = 3%. One analysis in the column-coupled system takes circa 15 min.     

Isotachophoretic focusing and mass spectrometry detection as tools for improving the determination of aromatic sulfonates in capillary electrophoresis

We explored isotachophoresis-capillary zone electrophoresis (ITP-CZE) with diode array detection on a single capillary to find out how to increase the injection volume and decrease the detection limits of aromatic sulfonates in CZE. The ITP was performed by applying a negative voltage in conjunction with hydrodynamic backpressure programming, and the terminating buffer was removed before the CZE separation, which resulted in highly sensitive determinations. The ITP increased the signal response of conventional hydrodynamic injection by a factor of 100, whereas the separation efficiency was unaffected. The limits of detection of the method were between 3 and 5 nugL(-1). The method was successfully used to determine these compounds in water samples. Experimental conditions for capillary electrophoresis-mass spectrometry were optimized and applied to determine aromatic sulfonates in water samples. These techniques enables the 2-naphthalenesulfonate to be determined in water samples.