纳米粒子的精准组装

纳米材料由于其独特的光、电、磁、力学等性质,成为了构建功能材料与器件的理想基元。实现纳米粒子的精确组装,是探究粒子之间的耦合聚集性质和制备宏观功能器件的基础。但是由于纳米粒子的小尺寸以及在溶液中运动的随机性与复杂性,精准控制纳米粒子组装体的形貌以及在空间中的相对位置仍存在巨大挑战。为了将纳米粒子组装成理想的有序结构,许多控制粒子组装的策略与方法得到发展。本文首先概述了纳米粒子自组装的控制方法与典型形貌,着重分析了影响粒子精准排布的因素与控制方法,并对纳米粒子及其组装体的光学性质与器件应用的最新研究进展进行了讨论,最后对目前纳米粒子精准组装所面临的挑战以及未来发展的方向进行了展望。     

基于非共价键作用力的纳米粒子层层组装薄膜

非共价键作用力常被用来构筑各种超分子结构,最有效的非共价键驱动力是静电相互作用力,被广泛应用于聚离子间的层层组装.本文简要介绍了基于非共价键驱动力的纳米粒子层层组装薄膜的制备及其组成、表面形貌、厚度和结构等的表征方法;分析了多层组装薄膜形成的普遍原理,认为静电相互作用力可能是主要成膜驱动力;归纳了现今比较常见的几种纳米粒子层层组装的类型,并总结了纳米粒子层层组装潜在的应用前景.     

嵌段共聚物调控纳米粒子自组装的研究进展

嵌段共聚物和纳米粒子复合纳米材料具有优异的性能,在生物医药、光电材料、催化材料等领域具有很大的应用价值,已成为备受关注的研究热点.利用嵌段共聚物自组装能够形成特定形态的纳米结构聚集体,将纳米粒子选择性的分布和定位于嵌段共聚物聚集体中,可以改善纳米粒子的性能及其应用.本文综述了近年来实验上利用自组装制备嵌段共聚物-纳米粒子复合纳米材料的方法,并总结分析了影响纳米粒子在嵌段共聚物聚集体中的分布和定位的各种因素,包括纳米粒子的大小、形状及其表面化学.最后总结了嵌段共聚物-纳米粒子的自组装在理论模拟方面的研究.     

金纳米粒子组装体的连续离散型纳米结构控制

采用柠檬酸钠还原氯金酸的方法,制备出粒径均一的金纳米粒子(AuNPs),通过加入二水合双(对-磺酰苯基)苯基膦化二钾盐(BSPP),增强了AuNPs体系的分散性与稳定性.选用直径为15和40nm的AuNPs,用不同序列巯基修饰的单链DNA连接到其表面,通过DNA链的杂交,形成不同结构的金纳米粒子组装体.通过改变加入DNA延长连接单元的比例,可以控制金纳米粒子组装体具有连续离散型的1∶1,2∶1和3∶1纳米结构.     

铁表面银纳米粒子自组装膜及其缓蚀性能研究

应用化学还原法于水溶液中制备银纳米粒子.在十二烷基硫醇的保护下,将银纳米粒子从水相转移到甲苯相,并将处理好的铁电极浸泡在含有十二烷基硫醇保护的银纳米粒子/甲苯溶液中,制得十二烷基硫醇/银纳米粒子自组装混合膜.电化学方法如交流阻抗谱(EIS)、极化曲线等研究该自组装膜在0.5 mol.L-1H2SO4溶液中的缓蚀作用.XPS测试证实该自组装膜十二烷基硫醇和银纳米粒子之存在.     

纳米粒子的控制生长和自组装研究进展

由于在纳米器件上潜在应用,通过化学方法控制的纳米粒子生长,以及纳米粒子自组装的一维、二维和三维点阵受到人们的广泛关注。本文介绍来近年来纳米粒子的控制生长和组装研究的现状。主要探讨了有机稳定剂对纳米粒子形状和尺寸控制的影响。含配位基团和长链烷烃的有机化合物不但可以用控制纳米粒子生长的稳定剂,而且可以用作纳米粒子自组装的模板剂。     

LB技术在纳米粒子组装中的应用

LB技术在纳米粒子组装中的应用;LB技术; 组装; 纳米粒子     

金核银壳纳米粒子薄膜的制备及SERS活性研究

采用柠檬酸化学还原法制备金溶胶, 通过自组装技术在石英片表面制备金纳米粒子薄膜, 在银增强剂混合溶液中反应获得金核银壳纳米粒子薄膜. 用紫外-可见吸收光谱仪和原子力显微镜(AFM)研究了不同条件下制备的金核银壳纳米粒子薄膜的光谱特性和表面形貌, 并以结晶紫为探针分子测量了金核银壳纳米粒子薄膜的表面增强拉曼光谱(SERS). 结果表明, 金纳米粒子薄膜的分布、银增强剂反应时间的长短对金核银壳纳米粒子薄膜的形成均有重要影响. 制备过程中, 可以通过控制反应条件获得一定粒径的、具有良好表面增强拉曼散射活性的金核银壳纳米粒子薄膜.     

聚合物-纳米金在油水界面的自组装及有序结构的构筑

聚合物-纳米金复合物既具有金纳米粒子的光、电及催化性能,又具有聚合物的可加工性及对外界的刺激响应性,因此已成为高分子科学及材料科学研究的热点。本文主要介绍了我们实验室在聚合物-纳米金在油水界面的自组装及有序结构的构筑研究方面的相关工作:(1)利用界面聚合的方法制备侧链接枝亲水性金纳米粒子的聚苯乙烯及杂化聚合物在水溶液中的自组装;(2)亲水性金纳米粒子及疏水性聚合物(或疏水性磁性纳米粒子)在油水界面的自组装研究;(3)利用金纳米粒子为交联点制备具有温度响应性聚合物微凝胶的研究。     

电化学沉积法制备金（核）-铜（壳）纳米粒子阵列

以组装在有机分子自组装膜/金基底电极上的Au纳米粒子阵列为电化学沉积模板,制备了金(核)-铜 (壳)纳米粒子阵列.选用巯基十一胺（AUDT）和巯基癸烷（DT）混合自组装膜作为基底电极与Au纳米粒子的耦联层,可以在一定的电位下实现金属Cu在Au纳米粒子上的选择性沉积.将沉积电位控制在－0.03 V（vs SCE）时,沉积初期（t ≤ 15 s,沉积粒子粒径 ≤ 20 nm ）金(核)-铜 (壳)粒子具有良好的单分散性和近似球形,而且粒径实验值同计算值非常吻合.     

Gold nanoparticle assemblies through hydrogen-bonded supramolecular mediators

The synthesis of spherical gold nanoparticle assemblies with multicomponent double rosette molecular boxes as mediators is presented. These nine-component hydrogen-bonded supramolecular structures held together by 36 hydrogen bonds induce gold nanoparticle assembly. The morphologies of the nanoparticle assemblies can be tuned easily by changing the quantity of the building block chemisorbed on the nanoparticle surface.     

Functionalized surface as template for in situ generation of two-dimensional metal nanoparticle assembly

Two-dimensional gold nanoparticle assemblies with an average nanoparticle size of 6 nm are generated on silicon and indium tin oxide (ITO)-coated glass surfaces, functionalized with polyethylenimine (PEI) silane monolayer. Contact angle measurements show increased hydrophilic character of the surface due to nanoparticle formation. X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) are used to monitor the chemical and structural development of these nanostructures, while UV–vis spectroscopy is used to follow the formation of the nanoparticle assemblies. This paper elucidates a simple route to in situ synthesis of surface immobilized gold nanoparticles under ambient conditions and also extends to the synthesis of other surface bound nanoparticles, like silver and platinum. Gold nanoparticle assemblies generated in this study are also catalytically active towards methanol oxidation reaction (MOR), which is relevant for direct methanol fuel cells (DMFCs).     

Frequency dependence of gold nanoparticle superassembly by dielectrophoresis

Dielectrophoresis is an effective method for capturing nanoparticles and assembling them into nanostructures. The frequency of the dielectrophoretic alternating current (ac) electric field greatly influences the morphology of resultant nanoparticle assemblies. In this study, frequency regimes associated with specific gold nanoparticle assembly morphologies were identified. Gold nanoparticles suspended in water were captured by microelectrodes at different electric field frequencies onto thin silicon nitride membranes. The resultant assemblies were examined by transmission electron microscopy. For this system, the major frequency-dependent influence on morphology appears to arise not from the Clausius-Mossotti factor of the dielectrophoretic force itself, but instead from ac electroosmotic fluid flow and the influence of the electrical double layer at the electrode-solution interface. Frequency regimes of technological interest include those forming one-dimensional nanoparticle chains, microwires, combinations of microwires and nanoparticle chains suitable for nanogap electrode formation, and dense three-dimensional assemblies with very high surface area.     

Relaxing Wrinkles in Jammed Interfacial Assemblies

Dynamic covalent bonding has emerged as a mean by which stresses in a network can be relaxed. Here, the strength of the bonding of ligands to nanoparticles at the interface between two immiscible liquids affect the same results in jammed assemblies of nanoparticle surfactants. Beyond a critical degree of overcrowding induced by the compression of jammed interfacial assemblies, the bonding of ligands to nanoparticles (NPs) can be broken, resulting in a desorption of the NPs from the interface. This reduces the areal density of nanoparticle surfactants at the interface, allowing the assemblies to relax, not to a fluid state but rather another jammed state. The relaxation of the wrinkles caused by the compression reflects the tendency of these assemblies to eliminate areas of high curvature, favoring a more planar geometry. This enabled the generation of giant vesicular and multivesicular structures from these assemblies.     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.     

Size-controlled synthesis of magnetite nanoparticles

Monodisperse magnetite nanoparticles have been synthesized by high-temperature solution-phase reaction of Fe(acac)3 in phenyl ether with alcohol, oleic acid, and oleylamine. Seed-mediated growth is used to control Fe3O4 nanoparticle size, and variously sized nanoparticles from 3 to 20 nm have been produced. The as-synthesized Fe3O4 nanoparticles have inverse spinel structure, and their assemblies can be transformed into gamma-Fe2O3 or alpha-Fe nanoparticle assemblies, depending on the annealing conditions. The reported procedure can be used as a general approach to various ferrite nanoparticles and nanoparticle superlattices.     

多层多孔Co3O4纳米粒子组装体的合成、表征和电化学性能研究

利用十二烷基磺酸钠(SDS)作为表面活性剂,合成了形貌化的CoC₂O₄配合物前驱物,然后在500 ℃下热分解形貌化的前驱物,得到了多层多孔Co₃O₄纳米粒子组装体。采用FESEM、TEM、HRTEM、XRD、N₂吸附脱附和Raman散射等手段对产物进行了分析和表征。低角XRD,TEM和N₂吸附脱附测试表明所得组装体具有多孔结构。常规XRD、HRTEM和Raman结果证明组装体中Co₃O₄纳米粒子建筑块结晶较好。与体相Co₃O₄晶体相比,Co₃O₄纳米粒子组装体的5个拉曼活性峰发生了明显的红移。将Co₃O₄纳米粒子组装体作为锂离子电池的正极材料进行了电化学性能测试,结果表明该组装体电极的首次放电容量为1 115 mAh·g^-1,远高于目前文献报道的Co₃O₄纳米管、纳米粒子和纳米棒电极。但是,该组装体电极的循环性能不好,有待进一步提高。     

Hierarchical superstructure of alkylamine-coated ZnS nanoparticle assemblies

We describe methodology for producing highly uniform, ordered and reproducible superstructures of surfactant-coated ZnS nanorod and nanowire assemblies, and propose a predictive multiscale "packing model" for superstructure formation based on electron microscopy and powder X-ray diffraction data on the superstructure, as well as on individual components of the nanostructured system. The studied nanoparticles showed a hierarchical structure starting from the individual faceted ZnS inorganic cores, onto which the crystalline surfactant molecules are adsorbed, to the superstructure of the nanoparticle arrays. Our results point out the critical role of the surfactant headgroup and polarity in nanoparticle assembly, and demonstrate the relationship between the molecular structure of the surfactant and the resulting superstructure of the nanoparticle assemblies.     

Chemically Organizable Nanosized Materials Preparation and Applications

We are interested in fabricating well-organized assemblies of nanosized materials with wet chemical approaches for the purpose of investigating various interfacial and mesoscopic phenomena. The paper describes how to use self-assembling techniques to prepare assemblies of colloidal nanoparticles and single walled carbon nanotubes on solid surfaces. Gold nanocolloids are taken as the model system, including preparation of functionalized nanoparticles, assembling on tailored substrates, surface reorganization, and 1D, 0D controlled assembling with the aid of scanning probe lithography. The typical work we have been doing using these elaborated nanoparticle assemblies includes, the quantitative investigations of die electromagnetic coupling of particle-particle and particle-substrate in surface enhanced Raman scattering (SERS), the single electron tunneling in nanoparticle assemblies measured with scanning probe microscopy (SPM) technique, the atomic force microscopy (AFM) lithography using the surface-confined gold nanoparticles as mask.     

Metallic cation induced one-dimensional assembly of poly(acrylic acid)-1-dodecanethiol-stabilized gold nanoparticles

In this work, we report a simple approach for controllable synthesis of one-dimensional (1D) gold nanoparticle (AuNP) assemblies in solution. In the presence of divalent metallic ions, poly(acrylic acid)-1-dodecanethiol-stabilized AuNPs (PAA-DDT@AuNPs) are found to form 1D assemblies in aqueous solution by an ion-templated chelation process; this causes an easily measurable change in the absorption spectrum of the particles. The assemblies are very stable and remain suspended in solution for more than one month without significant aggregation. The morphologies of these 1D assemblies are dependent on the concentration of metallic cations in the solution. While lower concentrations led to the formation of particle dimers, higher concentrations generated long nanoparticle chain networks. In addition, the effect of EDTA, the solution pH, and the size of the PAA-DDT@AuNPs is also studied for further exploration of the mechanism of the formation of the 1D assemblies.