黎曼流形上不变集的分形维数估计

本文利用整体Lyapunov指数给出了光滑黎曼流形上C1-映射不变集的分形维数的上界.     

Liu系统的Lyapunov维数估计

基于Leonov提出的Lyapunov维数理论,通过构造合适的Lyapunov函数,给出了Liu系统不变集的Lyapunov维数估计式.最后并给出了Liu系统混沌吸引子的Lyapunov维数估计.     

一类随机Moran集的分形维数

本文研究了随机压缩向量满足一定条件下的随机Moran集的分形维数.利用计算上盒维数的上界和分形维数之间的性质,得到Moran集各种分形维数. 并在一般情形下,给出随机Moran集的上盒维数的上界.     

形式级数域上Engel级数展式中“数字”次数的增长速度

WU在2003年研究了形式级数域上Engel级数展式中"数字"的次数以线性速度增长的例外集,并利用质量分布原理证明了该例外集具有满Hausdorff维数.本文我们主要研究形式级数域上Engel级数展式中"数字"的次数以多项式和指数速度增长的例外集,并给出他们的Hausdorff维数估计.     

填充维数的一个等价定义

本文研究了填充维数与上盒维数的关系.利用Cantor-Bendixson定理的方法,得到了由上盒维数给出的填充维数的等价定义.并证明了齐次Moran集对上盒维数和填充维数的连续性.     

关于一类Ornstein-Uhlenbeck型马氏过程Range的维数(英语)

本文我们考虑一类Ornstein-Uhlenbeck型马氏过程Range的分形性质,给出了它们的Hausdorff维数的上界和下界,此外在文末我们对这类过程的水平集的维数给出了估计。     

广义分数布朗运动的若干性质

本文, 我们定义了一类新的分数布朗运动, 研究了它的局部非决定性和局部时的联合连续性, 最后给出了它的水平集的Hausdorff维数的上、下界.     

一类非自相似集的强正则性

给出了由压缩函数族Si(x)=xM+im,(M>m>1,i=0,1,2,…,m-1)通过限制某个Si出现的方式而产生的压缩不变集Eu,v.根据一个相关序列集个数的特征及连分数性质,证明了集Eu,v的盒维数与Hausdorff维数相等.     

齐次集及其拟Lipschitz等价

本文定义并研究一类齐次分形,该类分形包含所有的(拟)Ahlfors-David正则集和许多非正则的Moran集,这里如果一个分形的Hausdorff维数与packing维数不相等,则称它是非正则的.对于这类齐次分形,本文得出它们的分形维数,并且给出在适当分离条件下两个齐次分形拟Lipschitz等价的充要条件.随后,本文将这些结果应用到非正则的Moran集上.     

向量值系数Rademacher级数及其水平集

何和刘首次研究了平面上向量值系数Rademacher级数水平集的交集.他们的结果基于5个模不超过l的向量和的估计.本文继续研究高维空间Rademacher级数及其水平集.如果向量维数大于2,何和刘所用的估计方法失效.当Rademacher级数值域在全空间稠密或者等于全空间时,我们用面罩函数来研究该问题,以此考虑水平集的Hausdorff维数.     

Group technology in production management: The short horizon planning level

We consider a set of parts divided into subsets called part types, determined in such a way that the parts belonging to the same part type are manufactured using the same sequence of tasks (i.e. the same working process). We are looking for a partition of the set of part types into subsets called part families, and for a partition of the set of tasks into subsets called production subsystems defined as follows: (1) the number of part families and the number of production subsystems are equal, (2) one (one only one) production subsystem corresponds to each part family, (3) one (and only one) part family corresponds to each production subsystem, (4) the previous partitions minimize the number of tasks performed in a production subsystem different from that which corresponds to the part family containing the part involved. We give a fast algorithm which leads to a good solution depending on the initial set of part families. We also propose an algorithm to find a ‘good’ initial set of part families.     

An improved part grouping model for minimizing makespan in FMS

In some flexible manufacturing systems (FMSs), limited tool magazine capacity requires grouping of parts into subsets for production. Although several studies have addressed the part grouping issue, research comparing the performance of models is scanty. Moreover, there is no congruency in the objectives of the present part grouping models and subsequent loading models. Traditionally, part grouping is addressed before machine loading. In this study, we overcome the drawbacks by proposing two models: model LM, which does not require part grouping, and model PGLRM (part grouping, loading and routing model), which requires part grouping. The performance of model LM serves as a benchmark. These two models also address machine loading and part routing issues concurrently. Model PGLRM's performance is then compared with the performance of model LM and few other existing part grouping models in terms of makespan and routing flexibility. Our analysis shows that model PGLRM not only results in a lower value of makespan but also imparts higher routing flexibility as compared to existing part grouping models.     

利用场耦合理论研究开放微波谐振腔

利用电磁场的等效原理，将一个开放微波腔等效于一个闭合边界微波腔（即封闭微波腔）和开放边界（即行波吸收边界）两部分，然后利用等效封闭微波腔的本征模式及其与开放边界的耦合，建立了关于开放微波腔模式（即模式场分布、频率、品质因子）的耦合方程组，其中开放边界为行波吸收边界.以X波段六腔渡越振荡管为例进行分析，将该振荡管等效为封闭微波腔和同轴输出结构两部分，用SUPPERFISH获得封闭腔的各个模式场分布及频率，然后根据封闭微波腔与开放边界的耦合，求得六腔渡越振荡管的工作模频率为9.25GHz，品质因子为115.2，与实验测量结果基本符合.     

自然电位测井的数学模型

自然电位测井是石油开发中一种常用而重要的测井方法。自然电位函数的数学模型可归结为具有间断交界面条件的椭圆型等位面边值问题,在交界面交汇点处,自然电位的跳跃通常不满足相容性条件,此时,这个边值问题不存在分块H1*解,不能使用有限元素法直接求解。本文介绍这一测井方法的数学模型及数值求解方法。     

基于肤色模型法的人脸定位技术研究

基于JAVA语言对人脸识别首要环节的定位技术进行代码开发,在传统肤色模型法的基础上,对采集到的大量图像进行深入研究,运用图像精准化微调和图像增强处理的方法,提高了传统肤色模型法在实际运用中的精准率,实现了人脸在视频图像中的定位。     

二维Minkowski空间R~(2.1)中混合型时空曲面的等温参数

对于三维Minkowski空间中的混合型时空曲面，证明了其在类空部分和类时部分上分别存在光滑的，并且连续到交界线上的等温参数．进一步，给出了混合型时空曲面存在在其类空部分和类时部分上是光滑的，而在交界线上是连续的等温多数的一个必要条件．     

On Right Alternative Superalgebras

Simple right alternative superalgebras which have a simple algebra as even part and, as odd part, an irreducible bimodule over the even part are investigated. Under these conditions, superalgebras with one dimensional even part are classified, as well as superalgebras having M ₂(F) as even part and a unital irreducible bimodule over M ₂(F) of dimension less than or equal to 6 as odd part. It is shown that there is only a unique non alternative simple right alternative superalgebra of the first type and, for the second type, there is a infinite family depending on a single parameter.     

J—自共轭微分算子谱的定性分析

本文对J－自共轭微分算子谱理论研究情况做一些概要性的介绍,第一部分简要回顾了J－自共轭微分算子理论研究的发展过程,第二,三部分介绍了J－自共轭微分算子的本质谱和离散谱定性分析的主要方法和结论;第四部分扼要叙述J－自共轭微分算子其它方面的一些工作,以及J－自共轭微分算子谱理论研究中尚待解决的问题。     

Simulation of Deep Drawing of Carbon Fibre Prepregs

The simulation of prepregs must regard highly anisotropic, viscoelastic and thermal-chemical properties. To this end a constitutive model is split into an anisotropic elastic part, which represents the fibre fraction and an isotropic, viscoelastic part, representing the matrix. The second part also contains curing, causing a dependency on time and temperature. During real deep-drawing processes large deformations up to 50 % occur, which is considered in a formulation at large strains. This model contains an anisotropic elastic part based on a Neo-Hooke law enhanced by an anisotropic part. A viscoelastic part is added using Hencky-strains and the work-conjugate Hill-stress to transfer a model for small strains into large strains. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A Cosmo-simula program for a simple air-pollution model

With a programmed example, the article introduces Cosmo-Simula, a language designed for the programming of continuous simulation. The language uses the Algol part of Simula for the programming of the algorithmic part and an extension of Cosmo for the programming of the administrative part of the problem. The translator is programmed using the Algol part of Simula and makes the extended Cosmo available for computers with an Algol-compiler.