New methods for determination of glyphosate and (aminomethyl)phosphonic acid in water and soil

New methods were developed to determine glyphosate, N-(phosphonomethyl)glycine, and its major metabolite, (aminomethyl)phosphonic acid in groundwater and soil. The methods involve ligand-exchange, anion-exchange and derivatisation and final identification and quantification by GC-MS. The limits of quantification in this experiment were 0.1 microg l(-1) for both compounds in water and 0.006 microg g(-1) for both compounds in soil. Decomposition in soil and occurrence in groundwater of the herbicide glyphosate was studied after its application for weed control on a Swedish railway embankment.     

Determination of glyphosate and its metabolite, (aminomethyl)phosphonic acid, in serum using capillary electrophoresis.

Capillary electrophoresis has been used to separate and quantitate glyphosate and its major metabolite, (aminomethyl)phosphonic acid (AMPA), in serum. The two compounds, after derivatization with p-toluenesulphonyl chloride, were clearly separated with 0.1 M boric acid-sodium hydroxide buffer (pH 9.6) containing 10% methanol. The separation was completed within 15 min at an applied potential of 30 kV. Calibration curves for the assay were linear over both the lower (0.5-10 micrograms/ml) and the higher (10-100 micrograms/ml) concentration ranges. The within-run and day-to-day coefficients of variation of peak area were 1.4-4.4 and 4.4-8.5%, respectively, for glyphosate and 1.8-2.9 and 1.8-2.9%, respectively, for AMPA. The within-run and day-to-day precisions of the migration time for both compounds were less than 1.8% and less than 2.5%, respectively. The detection limit of both derivatives was 0.1 microgram/ml in spiked sera, and the recoveries of glyphosate and AMPA were 87.9-88.8 and 78.4-86.9%, respectively. In this study, the reproducibility and the effect of pH changes on the electropherograms were especially examined.     

High-performance liquid chromatographic determination of glyphosate and (aminomethyl)phosphonic acid in human serum after conversion into p-toluenesulphonyl derivatives

We have developed a simple, highly sensitive and fast assay method for determining glyphosate and its major metabolite, (aminomethyl)phosphonic acid (AMPA), in serum by high-performance liquid chromatography with ultraviolet detection. Both compounds were successfully extracted with an anion-exchange resin column and allowed to react with p-toluenesulphonyl chloride. The detection limits were 0.3 microgram/ml for glyphosate and 0.2 microgram/ml for AMPA. Recoveries of glyphosate and AMPA spiked to serum were ca. 75% and ca. 88%, respectively. We are convinced that this procedure, in practice, allows medical examiners to analyse both compounds in the serum of poisoned patients within a short time.     

Automated trace level determination of glyphosate and aminomethyl phosphonic acid in water by on-line anion-exchange solid-phase extraction followed by cation-exchange liquid chromatography and post-column derivatization.

An automated method based on the on-line coupling of anion-exchange solid-phase extraction (SPE) and cation-exchange liquid chromatography followed by post-column derivatization and fluorescence detection has been developed for the trace level determination of glyphosate and its primary conversion product aminomethyl phosphonic acid (AMPA) in water. PRP-X100 poly(styrene-divinylbenzene)-trimethylammonium anion-exchange cartridges (20 x 2 mm, 10 microm) were selected for the SPE of glyphosate and AMPA. The ionic compounds present in the samples strongly influenced the extraction of both analytes; however, when an on-line ion-exchange clean-up step was introduced before sample SPE, the problem was largely solved. By processing 100-ml samples detection limits better than 0.02 microg/l for glyphosate and 0.1 microg/l for AMPA were achieved in river water. Both analytes were unstable in solution and the approach of storing samples on the PRP-X100 SPE cartridges was evaluated for a period of 1 month under three different storage conditions (deep freeze, refrigeration and 20 degrees C).     

On the complexation of some univalent cations with beauvericin in nitrobenzene saturated with water

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺(aq)?+?1·Cs⁺(nb) ? 1·M⁺(nb)?+?Cs⁺(aq) taking place in the two-phase water–nitrobenzene system (M⁺?=?Li⁺, Na⁺, K⁺, Rb⁺, H₃O⁺, NH₄ ⁺, Tl⁺; 1?=?beauvericin; aq?=?aqueous phase, nb?=?nitrobenzene phase) were determined. Moreover, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of Rb^+?<?Na⁺, H₃O^+?<?Tl^+?<?NH ₄ ^+? <?K^+?<?Li⁺.     

Liquid chromatography/electrospray ionization/isotopic dilution mass spectrometry analysis of n-(phosphonomethyl) glycine and mass spectrometry analysis of aminomethyl phosphonic acid in environmental water and vegetation matrixes.

A liquid chromatography/electrospray/mass spectrometry (LC/ES/MS) method was developed for the analysis of glyphosate (n-phosphonomethyl glycine) and its metabolite, aminomethyl phosphonic acid (AMPA) using isotope-labelled glyphosate as a method surrogate. Optimized parameters were achieved to derivatize glyphosate and AMPA using 9-fluorenylmethyl chloroformate (FMOC-Cl) in borate buffer prior to a reversed-phase LC analysis. Method spike recovery data obtained using laboratory and real world sample matrixes indicated an excellent correlation between the recovery of the native and isotope-labelled glyphosate. Hence, the first performance-based, isotope dilution MS method with superior precision, accuracy, and data quality was developed for the analysis of glyphosate. There was, however, no observable correlation between the isotope-labelled glyphosate and AMPA. Thus, the use of this procedure for the accurate analysis of AMPA was not supported. Method detection limits established using standard U.S. Environmental Protection Agency protocol were 0.06 and 0.30 microg/L, respectively, for glyphosate and AMPA in water matrixes and 0.11 and 0.53 microg/g, respectively, in vegetation matrixes. Problems, solutions, and the method performance data related to the analysis of chlorine-treated drinking water samples are discussed. Applying this method to other environmental matrixes, e.g., soil, with minimum modifications is possible, assuring accurate, multimedia studies of glyphosate concentration in the environment and the delivery of useful multimedia information for regulatory applications.     

Simultaneous capillary electrophoretic separation of small anions and cations after complexation with ethylenediaminetetraacetic acid

A new approach for simultaneous separation of small inorganic and organic anions and metal cations by capillary electrophoresis is demonstrated. Metal cations in the sample are transformed into their chelates with EDTA and are separated together with the anions using an anionic separation mode. Simultaneous separation of 19 common anions and cations was achieved in about 6 min with the electrolyte containing 5 mM K2CrO4, 3 mM boric acid, 35 microM cetyltrimethylammonium bromide and 12 microM EDTA at pH 8. Limits of detection (s/n = 3) were in the range from 4 ppb for Cl- up to 1250 ppb for Cu-EDTA and RSDs of peak areas ranged from 1.4% for Cl- up to 8.5% for Mn-EDTA chelate. The practical applicability of the method was demonstrated on the analysis of anions and cations in various water samples.     

Role of multivalent cations in the self-assembly of phospholipid-DNA complexes

In view of efficient and nontoxic delivery of genes to cells, complexes made of phospholipids (noncationic) and DNA are assembled through the mediation of multivalent cations. The association of lipids with DNA is explained through the charge reversal of lipid headgroups by specific adsorption of cations. The ion binding is quantified by the Gouy-Chapman-Stern theory which provides a good estimate for the minimal concentration of cations required to produce complexes. Coarse-grained Monte Carlo calculations support X-ray diffraction experiments in the sense that lipids form inverted micelles around hexagonally arranged DNA rods, with cations in between to maintain the cohesion. The complexes are more cohesive in terms of total free energy as the cation valence increases. The presented methodology may help develop predictive models for biomolecular self-assembled systems.     

Thermodynamics of complexation of monovalent metal cations by the ionophore monensin free acid in acetonitrile

The standard Gibbs functions, enthalpies, and entropies for the formation of the complexes of monensin acid with monovalent metal cations in acetonitrile were obtained using various methods (conductometry, potentiometry, and calorimetry). Complexation is appreciable (from 2.0 to 4.5 in terms of association constant logarithm) and controlled mainly by the enthalpic effect. Comparison with formation of the corresponding neutral complexes permits a comparison to the process of monensin mediated transport of cation in membranes. A two-step process involving first the formation of the acidic complex is suggested.     

Determination of glyphosate and aminomethylphosphonic acid in natural water using the capillary electrophoresis combined with enrichment step

A previously elaborated capillary electrophoresis (CE) method used for the determination of glyphosate and aminomethylphosphonic acid (AMPA) was slightly modified in order to improve the sensitivity. However, detection limits attained (5 μg mL⁻¹ for glyphosate and 4 μg mL⁻¹ for AMPA) were still not satisfactory for analytical purposes, thus the addition of a preconcentration step before the CE analysis was proposed. AMBERLITE^®IRA-900, a strong anion-exchange resin, was used to preconcentrate both analytes in environmental aqueous samples. The experimental conditions optimised in a previous work were readapted, by decreasing the eluent concentration due to CE limitations. Satisfactory results were attained when spiked ultrapure water was applied, with recoveries from 84 to 87% for glyphosate (R.S.D. < 6%) and from 85 to 98% for AMPA (R.S.D. < 5%). Enrichment factors up to 65 were achieved with this system, allowing the determination of 85 ng mL⁻¹ of glyphosate and 60 ng mL⁻¹ of AMPA. The extraction efficiency varied when four different natural water samples of varying conductivity were applied. Especially the strong dependence on ion concentration in samples on AMPA recovery was found. For glyphosate, good recoveries (86-99%) were obtained for samples of low and medium conductivity (0-800 μS). The effect of sample salt content on extraction efficiency was studied and a linear relationship could be established for AMPA (r² = 0.996). An important improvement on recoveries was observed when lower volumes of sample were treated.A HPLC method with UV-vis detection and pre-column derivatisation with p-toluensulphonyl chloride was compared to the CE method. No significant differences in results were found when t- and F-statistical tests were applied.     

Influence of complexation by metal cations on solvophobic retention of crown compounds in reverse-phase high-performance liquid chromatography

The retention of crown compounds in reverse-phase HPLC is determined by their ability to bind to cations present in the eluent. The dependence of the retention of crown compounds on concentration of the binding cation has a break. This enables the stability constant of the crown-compound-cation complex to be calculated. The retention of the antitumor antibiotic actinomycin D in 75% MeOH is demonstrated to depend on [Na⁺] and not on [K⁺] for concentrations of the latter from 10^–6 to 10^–1 M.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2265–2269, October, 1991.     

Complexation of strontium with triisopropyl ester of dichloromethylene-bis(phosphonic acid) in water and ionic liquids

The complexation of strontium with triisopropyl ester of dichloromethylene-bis(phosphonic acid) (NaL) is examined using ³¹P NMR in water and the hydrophilic ionic liquid 1-butyl-3-methylimidazolium dicyanamide ([BMIM][N(CN)₂]):      

Rapid and direct determination of glyphosate and aminomethylphosphonic acid in water using anion-exchange chromatography with coulometric detection

A simple, rapid, and low-cost coulometric method for direct detection of glyphosate and aminomethylphosphonic acid (AMPA) in water samples using anion-exchange chromatography and coulometric detection with copper electrode is presented. Under optimized conditions, the limits of detection (LODs) (S/N=3) were 0.038microgml(-1) for glyphosate and 0.24microgml(-1) for AMPA, without any preconcentration method. The calibration curves were linear and presented an excellent correlation coefficient. The method was successfully applied to the determination of glyphosate and AMPA in water samples without any kind of extraction, clean-up, or preconcentration step. No interferent was found in the water, like this, the recovery was, practically, 100%.     

Influence of multivalent ions on power production from mixing salt and fresh water with a reverse electrodialysis system

Reverse electrodialysis is a membrane-based technique for production of sustainable electricity from controlled mixing of a diluted electrolyte solution (e.g., river water) and a concentrated electrolyte solution (e.g., sea water). Reverse electrodialysis has been investigated with pure sodium chloride solutions. In practice, however, in most cases also other ions are present in both feed solutions. In the present paper, the effect of multivalent ions on the performance of a reverse electrodialysis stack was investigated. Results show that, besides a higher stack resistance in presence of multivalent ions, especially the presence of multivalent ions in the dilute solution has a lowering effect on the stack voltage. This can be explained by an observed transport of these ions from the diluted electrolyte solution to the concentrated electrolyte solution. In order to prevent or hamper this transport against the activity gradient, monovalent-selective membranes can be used. This shows indeed better results with respect to the stack voltage. Therefore, it would be beneficial to use monovalent-selective membranes in reverse electrodialysis, especially in the case of a relatively high content of multivalent ions in the dilute (i.e., in the first stages of the installation where the sodium chloride content in the dilute is still relatively low).     

Optimization and performance evaluation of the analysis of glyphosate and AMPA in water by HPLC with fluorescence detection

Summary The object of this work was to optimize and validate an analytical method for the analysis of glyphosate and its main metabolite AMPA (aminomethylphosphonic acid) in natural and drinking water, for sanitary control. The method uses a derivatization step which transforms glyphosate and AMPA into fluorescent products by reaction with 9-fluorenylmethylchloroformate (FMOC-Cl). The kinetics and yield of this reaction were studied by use of different samples. The derivatization products were injected directly into the liquid chromatograph and separated on an amino-functionalized silica gel column. The performance of the method (detection limit, quantification limit, linearity, and relative standard deviation) was studied and the results obtained showed the method was suitable for routine analysis of glyphosate and AMPA. An interlaboratory test with five laboratories confirmed that good results were obtained by use of this method.     

Effect of multivalent cations,temperature, and aging on SOM thermal properties

Multivalent cations are suggested to influence the supramolecular structure of soil organic matter (SOM) via inter- and intra-molecular interactions with SOM functional groups. In this study, we tested the combined effect of cations, temperature treatment, and isothermal aging on SOM matrix properties. Samples from a peat and a mineral soil were either enriched with Na, Ca, and Al or desalinated in batch experiments. After treatment at 25, 40, 60, and 105 °C and after different periods of aging at 19 °C and 31 % relative humidity, we investigated the physicochemical matrix stability and the thermal stability against combustion. We hypothesized that multivalent cations stabilize the SOM matrix, that these structures disrupt at elevated temperatures, and that aging leads to an increase in matrix stability. The results show that cation-specific effects on matrix rigidity started to evolve in the peat only after 8 weeks of aging and were significantly lower than the temperature effects. Temperature treatment above 40 °C caused a non (or not immediately) reversible loss of water molecule bridges (WaMB) and above 60 °C a partly reversible melting process probably of semi-crystalline poly(methylene). Thermal stability increased with increasing cation valence and degree of protonation and was much less affected by temperature. Generally, Na-treated and control samples revealed lower thermal stability and lower increase in matrix rigidity with aging than those treated with Ca, Al, and H. We conclude that drying at elevated temperatures (>40 °C) may irreversibly change SOM structure via disruption of labile cross-links and melting of semi-crystalline domains.     

Trace analysis of glyphosate in water by capillary electrophoresis on a chip with high sample volume loadability

A new method for the determination of trace glyphosate (GLYP), non-selective pesticide, by CZE with online ITP pre-treatment of drinking waters on a column-coupling (CC) chip has been developed. CC chip was equipped with two injection channels of 0.9 and 9.9 μL volumes, two separation channels of 9.3 μL total volume and a pair of conductivity detectors. A very effective ITP sample clean-up performed in the first channel at low pH (3.2) was introduced for quick CZE resolution and detection of GLYP carried out at higher pH (6.1) in the second channel on the CC chip. The LOD for GLYP was estimated at 2.5 μg/L (15 nmol/L) using a 9.9 |mL volume of the injection channel. ITP-CZE analyses of model and real samples have provided very favorable intra-day (0.1-1.2% RSD) and inter-day (2.9% RSD) repeatabilities of the migration time for GLYP while 0.2-6.9% RSD values were typical for the peak area data. Recoveries of GLYP in spiked drinking water varied in the range of 99-109%. A minimum pre-treatment of drinking water (degassing and dilution) and a short analysis time (ca. 10 min) were distinctive features of ITP-CZE determinations of GLYP on the CC chip with high sample volume loaded, as well.