Determination of bismuth, indium and lead in geological samples by electrothermal AAS Part 2. Comparative study of palladium and molybdenum containing chemical modifiers*

A comparative and systematic study has been carried out of the effects of palladium and molybdenum containing chemical modifiers, such as Pd + Rh, Pd + Pt, Pd + Ru, Pd + Rh + Pt, Pd + Rh + Ru, Mo + Pd, Mo + Rh, Mo + Ru and Mo + Pt and additionally tartaric acid (TA) as a reducing agent together with mixed modifiers for the thermal stabilization of Bi, In and Pb in a Zeeman electrothermal atomic absorption spectrometer (ETAAS). The effect of the mass ratios of the mixed modifier components on the maximum pretreatment temperature for the analytes has been determined. The modifier mixtures of Pd + Rh + Pt, Mo + Pd + TA and Mo + Pt + TA were found to be especially powerful for the determination of Bi, In and Pb. These mixed modifiers could increase the ashing temperatures of the analytes up to 1250–1400° C. They were applied to the determination of Bi and Pb in dissolved geological reference samples and accuracy and precision of the method were thereby enhanced. The percent relative error was decreased from 20.0 to 0.4 for Bi and from 10.5 to 0.3 for Pb, depending on the sample type. Received: 9 May 1997 / Revised: 19 August 1997 / Accepted: 20 August 1997     

Determination of bismuth and lead in geological samples by electrothermal AAS Part 1. Comparative study of tungsten containing chemical modifiers

A comparative study on the efficiency of some tungsten containing chemical modifiers such as W, W+Pd, W+Rh, W+Pt and W+Ru for thermal stabilization of Bi, In, Pb and Sb has been performed systematically by a Zeeman electrothermal atomization atomic absorption spectrometer (ETAAS). The addition of tartaric acid (TA) as a reducing agent additionally to the mixed modifiers was studied. A mixture of W+Pd+TA was found to be a powerful mixed modifier for the determination of Bi, In, Pb and Sb. Pretreatment temperatures could be increased up to 1250–1500° C using this mixed modifier. The use of the mixed modifier results in an enhanced accuracy and precision of the method and recovery rates above 97% for all samples. The W+Pd+TA mixed modifier was applied to the determination of Bi and Pb in dissolved geological reference samples. Received: 14 March 1996 / Revised: 3 June 1996 / Accepted: 30 June 1996     

Determination of bismuth and lead in geological samples by electrothermal AAS Part 1. Comparative study of tungsten containing chemical modifiers

A comparative study on the efficiency of some tungsten containing chemical modifiers such as W, W+Pd, W+Rh, W+Pt and W+Ru for thermal stabilization of Bi, In, Pb and Sb has been performed systematically by a Zeeman electrothermal atomization atomic absorption spectrometer (ETAAS). The addition of tartaric acid (TA) as a reducing agent additionally to the mixed modifiers was studied. A mixture of W+Pd+TA was found to be a powerful mixed modifier for the determination of Bi, In, Pb and Sb. Pretreatment temperatures could be increased up to 1250–1500° C using this mixed modifier. The use of the mixed modifier results in an enhanced accuracy and precision of the method and recovery rates above 97% for all samples. The W+Pd+TA mixed modifier was applied to the determination of Bi and Pb in dissolved geological reference samples. Received: 14 March 1996 / Revised: 3 June 1996 / Accepted: 30 June 1996     

Direct determination of bismuth, indium and lead in sea water by Zeeman ETAAS using molybdenum containing chemical modifiers

Direct determination of Bi, In and Pb in sea water samples has been carried out by ETAAS with Zeeman background correction using molybdenum containing chemical modifiers and tartaric acid as a reducing agent. Maximum pyrolysis temperatures and the effect of mass ratios of the mixed modifier components on analytes have been investigated. Mo+Pd+TA or Mo+Pt+TA mixture was found to be powerful for the determination of 50 mug l(-1) of Bi, In and Pb spiked into synthetic and real sea waters. The accuracy and precision of the determination were thereby enhanced. The recoveries of analytes spiked were 94-103% with Mo+Pd+TA or Mo+Pt+TA and they are only 49-61% without modifier.     

Determination of cadmium, chromium, copper and lead in sediments and soil samples by electrothermal atomic absorption spectrometry using zirconium containing chemical modifiers.

A method for direct determination of cadmium, chromium, copper and lead in sediments and soil samples by electrothermal atomic absorption spectrometry using Zr, Ir, etylenediamine acetic acid (EDTA), Zr + EDTA, Ir + EDTA, Zr + Ir and Zr + Ir + EDTA as chemical modifiers in 0.5% (v/v) Triton X-100 plus 0.2% (v/v) nitric acid mixture used as diluent was developed. The effects of mass and mass ratio of modifiers on analytes in sample solutions were studied. The optimum masses and mass ratios of modifiers: 20 microg of Zr, 4 microg of Ir, 100 microg of EDTA and 20 microg of Zr + 4 microg of Ir + 100 microg of EDTA, were used to enhance the analyte signals. Pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, and detection limits of analytes in samples were compared in the presence or absence of a modifier. The detection limits and characteristic masses of analytes in a 0.5% (m/v) dissolved sample (dilution factor of 200 ml g(-1)) obtained with Zr + Ir + EDTA are 8.0 ng g(-1) and 1.2 pg for Cd, 61 ng g(-1) and 4.3 pg for Cr, 32 ng g(-1) and 23 pg for Cu, and 3.4 ng g(-1) and 19 pg for Pb, respectively. The Zr + Ir + EDTA modifier mixture was found to be preferable for the determination of analytes in sediment and soil-certified and standard reference materials. Depending on the sample type, the percent recoveries of analytes were increased from 81 to 103% by using the proposed modifier mixture; the results obtained are in good agreement with the certified values.     

Comparative study of chemical modifiers for the determination of molybdenum in milk by electrothermal atomisation atomic absorption spectrometry

A comparative study of various chemical modifiers for the determination of molybdenum in milk by electrothermal atomisation atomic absorption spectrometry was carried out. Methods with nitric acid or barium difluoride as the chemical modifier and in the absence of a chemical modifier were studied by introducing the milk samples directly into the graphite furnace with octyl alcohol. The graphite furnace programme, amount of modifier and the calibration and additions graphs were studied in all instances. The characteristic masses were 17.82, 18.64 and 12.08 pg of molybdenum in the absence of a chemical modifier and with nitric acid or barium difluoride as the chemical modifier, respectively. The precision, accuracy and interferences of the method were also investigated.     

Determination of cadmium in slurries of marine sediment samples by electrothermal atomic absorption spectrometry using palladium and phosphate as chemical modifiers

A method for the determination of cadmium in slurries of marine sediment using palladium and phosphate as chemical modifier has been optimized. To stabilize the marine sediment slurry, Triton X-100 at 0.1% was used. To obtain a complete pyrolysis of the slurry sample two mineralization steps were used, the first at 480 °C and the second at 600 °C and 700 °C for phosphate and palladium, respectively. The precision and accuracy of the method have been studied by analyzing the Reference Material PACS-1 (marine sediment) of National Research Council Canada. The detection limits (LOD) were 11.9 g kg^–1 for phosphate and 42.0 g kg^–1 when palladium was used. These methods have been applied to the determination of cadmium in marine sediment samples from the Galicia coast and the results of both methods were compared; no significant differences were found between the two procedures.     

Determination of arsenic in geological samples by HG AAS

A continuous hydride generation (HG) AAS procedure for the determination of As in geological samples utilizing the SH-group containing amino-acid L-cysteine for the pre-reduction of As(V) to As(III) in HNO₃ has been optimized and compared with a method utilizing KI and ascorbic acid in HCl. The influence of some transition metals (Co, Fe, Ni) on the determination of As has been investigated. Decompositions of geological certified reference materials, sediments and soils of different origin and geochemical composition with concentrated HNO₃ have been performed in open and closed systems and the resulting As content has been compared with certified and proposed data.     

Determination of arsenic in geological samples by HG AAS

A continuous hydride generation (HG) AAS procedure for the determination of As in geological samples utilizing the SH-group containing amino-acid L-cysteine for the pre-reduction of As (V) to As (III) in HNO(3) has been optimized and compared with a method utilizing KI and ascorbic acid in HCl. The influence of some transition metals (Co, Fe, Ni) on the determination of As has been investigated. Decompositions of geological certified reference materials, sediments and soils of different origin and geochemical composition with concentrated HNO(3) have been performed in open and closed systems and the resulting As content has been compared with certified and proposed data.     

Determination of cadmium, chromium and lead in marine sediment slurry samples by electrothermal atomic absorption spectrometry using permanent modifiers

A procedure for the determination of cadmium, chromium, and lead in marine sediment slurries by electrothermal atomic absorption spectrometry is proposed. Slurry was prepared by mixing 10 mg of ground sample with particle size smaller than 50 μm completed to the weight of 1.0 g with a 3% nitric acid and 10% hydrogen peroxide solution. The slurry was maintained homogeneous with an aquarium air pump. For cadmium, the best results were obtained using iridium permanent with optimum pyrolysis and atomization temperatures of 400 and 1300 °C, respectively, a characteristic mass, m_o (1% absorption), of 2.3 pg (recommended 1 pg). Without modifier use, zirconium, ruthenium, and rhodium m_o were 3.4, 4.1, 4.6, and 4.8 pg, respectively. For chromium, the most sensitive condition was obtained with zirconium permanent with optimum pyrolysis and atomization temperatures of 1500 and 2500 °C, m_o of 6.6 pg (recommended 5.5 pg); and without modifier use, rhodium, iridium, and ruthenium m_o were 5.3, 8.8, 8.8, and 8.9 pg, respectively. For lead, the best modifier was also zirconium, m_o of 8.3 pg for the optimum pyrolysis and atomization temperatures of 600 and 1400 °C, respectively, (recommended m_o of 9.0 pg). For iridium, ruthenium, without modifier, and rhodium, m_o were 14.7, 15.5, 16.5, and 16.5 pg, respectively. For all the modifiers selected in each case, the peaks were symmetrical with r² higher than 0.99. Being analyzed (n = 10), two marine sediment reference materials (PACS-2 and MESS-2 from NRCC), the determined values, μg l⁻¹, and certified values in brackets, were 2.17 ± 0.05 (2.11 ± 0.15) and 0.25 ± 0.03 (0.24 ± 0.01) for cadmium in PACS-2 and MESS-2, respectively. For chromium in PACS-2 and MESS-2 the values were 94.7 ± 5.6 (90.7 ± 4.6) and 102.3 ± 10.7 (106 ± 8), respectively. Finally, for lead in PACS-2 and MESS-2, the results obtained were 184 ± 7 (183 ± 8) and of 25.2 ± 0.40 (21.9 ± 1.2), respectively. For cadmium and lead in both samples and chromium in PACS-2, calibration was accomplished with aqueous calibration curves. For chromium in MESS-2, only with the standard addition technique results were in agreement with the certified ones. The limits of detection (k = 3, n = 10) obtained with the diluents were 0.1, 3.4, and 3.6 μg l⁻¹ for cadmium, chromium, and lead, respectively.     

Determination of cadmium and lead in biological samples by Zeeman ETAAS using various chemical modifiers

The electrothermal atomic absorption spectrometric determination of cadmium and lead in biological certified reference materials (CRMs) has been carried out by using NH(4)H(2)PO(4), Ni, Pd, Ni+NH(4)H(2)PO(4), Pd+NH(4)H(2)PO(4) and Ni+Pd+NH(4)H(2)PO(4) as chemical modifiers. A comprehensive comparison was made among the modifiers in 1% Triton X-100 plus 0.2% nitric acid as diluent and without modifier. Zeeman background correction and graphite tubes inserted with platforms were used. Comparison was made in terms of pyrolysis and atomization temperatures, atomization and background absorption profiles. Ni+Pd+NH(4)H(2)PO(4) modifier mixture was found to be preferable for the determination of Cd and Pb. Pyrolysis temperatures of analytes were increased up to 900 degrees C for Cd and 1250 degrees C for Pb by using Ni+Pd+NH(4)H(2)PO(4) in 1% Triton X-100 plus 0.2% nitric acid diluent solution. Biological CRMs were analyzed to verify the accuracy and precision of this method. Depending on the biological sample type, the percent recoveries were increased from 62 to 102% for Cd and from 58 to 106% for Pb by using the proposed modifier mixture. The detection limits of Cd and Pb were found to be 0.04, 0.92 mug l(-1), respectively.     

Determination of manganese in urine and whole blood samples by electrothermal atomic absorption spectrometry: comparison of chemical modifiers.

In this work, methodologies to determine manganese (Mn) in urine and whole blood by electrothermal atomic absorption spectrometry were developed. The use of Ru, Rh, and Zr as permanent modifiers, Pd as a modifier in solution, and the condition without modifier were investigated for the direct determination of Mn in urine and whole blood samples. The best results for Mn in urine and in whole blood were obtained without modifier use. The analytical characteristic, such as accuracy, precision and limit of detection of the proposed methodology were adequate.     

Organic palladium and palladium-magnesium chemical modifiers in direct determination of lead in fractions from distillation of crude oil by electrothermal atomic absorption analysis

Platinum reforming catalysts are easily poisoned by increased levels of lead, therefore a sensitive atomic absorption spectrometric procedure for lead determination in fractions from crude oil distillation was developed. Lead was present in organic form in the samples analysed therefore the behaviour of various lead compounds (Pb-alkylarylsulphonate, Pb-4-cyclohexanobutyrate, tetraethyllead, Pb in fuel oil) was studied. The best procedure for the determination of lead in different petroleum products, including those containing asphaltenes includes a pretreatment with iodine and methyltrioctylammonium chloride, followed by the use of an organic Pd-Mg modifier. Under these conditions an effective matrix removal is possible at a pyrolysis temperature up to approximately 1100°C and the behaviour of lead present in different forms is unified. The characteristic mass is 11–12 pg Pb, corresponding to a detection limit of 0.25 ng g⁻¹ for 20 μl sample solution. This can be lowered by multiple injection.     

Determination of vanadium in mussels by electrothermal atomic absorption spectrometry without chemical modifiers

A method was developed for the quantitative determination of total vanadium concentration in mussels via electrothermal atomic absorption spectrometry (ETAAS). After the microwave digestion of the samples, a program using temperatures of 1600 °C and 2600 °C for ashing and atomization respectively, without any matrix modifiers, allowed us to obtain results that were satisfactory since they agreed closely with certified reference material values. The detection limit was 0.03 mg kg^–1 (dry weight), indicating that the method is suitable for the analysis of mussel samples. This determination was compared with matrix modifiers that have been reported previously. The method was applied to various cultivated and wild mussels from the Galician coast, yielding levels below 1 mg kg^–1 (wet weight).     

Determination of bismuth in geological materials by automated hydride generation and electrothermal atomic absorption spectrometry

The rapid and precise determination of bismuth (>5 μg kg^?1 in geological materials is described. The sample is decomposed with a HClO₄/HNO₃/HF mixture; interferences are eliminated by addition of aluminium chloride, ascorbic acid and thiourea. Bismuth hydride is introduced into a quartz cell atomizer.     

Matrix sensitivity of solid sampling AAS. Determination of zinc in geological samples

Direct solid sampling techniques in AAS have several advantages over wet digestion methods such as small sample size requirements and simple calibration procedures. But some disadvantages also exist such as the sample in homogeneity and the matrix sensitivity of calibration. The calibration is commonly carried out by varying the sample mass and evaluating the peak intensity versus absolute analyte amount. It is shown here that this procedure must be considered doubtful when matrix effects are expected. In the case of zinc determination in geological samples it has been shown that calibration functions obtained by different reference materials differ significantly from each other. As an alternative a three-dimensional calibration technique can be applied that evaluates the peak intensity versus both analyte content and sample weight. The resulting calibration planes are expected to be hyperbolically curved. This three-dimensional calibration has been applied to the determination of Zn in geological samples and compared with classical solid sampling AAS calibration procedures.     

Molybdenum, Mo-Ir and Mo-Ru coatings as permanent chemical modifiers for the determination of cadmium and lead in sediments and soil samples by electrothermal atomic absorption spectrometry

Molybdenum, Ir, Ru, Mo-Ir, Mo-Ru thermally coated on to platforms inserted in pyrolytic graphite tubes as permanent modifiers and Pd + Mg(NO₃)₂ conventional modifier mixture have been employed for the determination of cadmium and lead in dissolved sediments and soil samples by electrothermal atomic absorption spectrometry (ETAAS). Optimum masses and mass ratios of permanent modifiers for the analysis of Cd and Pb in sample solutions have been investigated. The 280 μg of Mo, 200 μg of Ir, 200 μg of Ru, 280 μg of Mo + 200 μg of Ir or 280 μg of Mo + 200 μg of Ru has been found as efficient as 5 μg of Pd + 3 μg of Mg(NO₃)₂ for increasing thermal stabilization of analytes and for decreasing the most serious interferences. Pyrolysis and atomization temperatures, atomization and background signal shapes, characteristic masses and detection limits of analytes in dissolved samples with or without permanent and conventional modifiers have been compared. The detection limits and characteristic masses obtained with Mo-Ir coated platform are 0.01 μg g⁻¹ and 1.1 pg for Cd and 0.09 μg g⁻¹ and 19 pg for Pb, respectively. Long-term stabilities for analytes in samples with Mo, Mo-Ir, Mo-Ru and Pd + Mg(NO₃)₂ have been studied. Cadmium and lead contents have been determined in certified and standard reference materials by using optimum conditions investigated and the results obtained with Mo-Ir or Mo-Ru were in agreement with the values of certified reference materials.     

Determination of lead in fish samples by slurry sampling electrothermal atomic absorption spectrometry

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry (USS-ETAAS) was been applied to the determination of lead in several fish samples. The influences of instrument operating conditions and slurry preparation on the signal were examined. Palladium and ammonium nitrate were used as the modifier to improve the signal. Since the sensitivity to lead in various fish slurries and aqueous solutions was different, the standard additions method was used for the determination of lead in these fish samples. The method was applied to the determination of lead in dogfish muscle reference material (DORM-2) and a swordfish muscle sample purchased from the local market. The analysis results agreed with the reference value. The accuracy was better than 6%. The precision between sample replicates was better than 16% with the USS-ETAAS method. The detection limit of lead estimated from standard additions curve was about 0.053-0.058 microgram g-1 in different samples.     

电沉积-钨丝电热原子吸收光谱法测定地质样品中痕量金

以市售幻灯投仪卤钨灯泡钨丝为原子化器的钨丝电热原子吸收光谱分析仪(TC-AAS),功率小、仪器成本低[1,2],如用微型CCD光谱仪作检测系统,可以实现原子吸收光谱仪的小型化,甚至可用于野外现场分析[3,4].