Separation of porphyrin-based photosensitizer isomers by laser-induced fluorescence capillary electrophoresis

Methods for the separation of photosensitizer isomers, such as benzoporphyrin derivative monoacid, benzoporphyrin ethyl monoacid, 2-[1-hexyloxyethyl]-2-devinylpyropheophorbide-a, diethyleneglycol diester benzoporphyrin derivative, tin ethyl etiopurpurin, and phthalocyanine tetrasulfonate, have been systematically developed by CE. Detection was accomplished by UV absorption at 214 nm or by LIF with excitation at 442/488 nm and emission at 690 nm. The effects of three major experimental parameters of buffer types, organic solvents, and surfactant additives are described. The optimized separation conditions were determined so as to provide satisfactory separation efficiency and analysis time. The methods are shown to be suitable for the separation and determination of porphyrin and phthalocyanines regioisomers, diastereoisomers, and enantiomers.     

Separation of positional isomers by cucurbit[7]uril-mediated capillary electrophoresis

A novel macrocyclic molecule, cucurbit[7]uril (CB[7]) was for the first time employed as an additive in capillary electrophoresis (CE). In similarity to other macrocyclic molecules, such as crown ethers, cyclodextrins (CDs) and calixarenes, CB[7] can form inclusion complexes with a variety of guest molecules due to its inner cavity. Thus, it can be used like other macrocyclic molecules to manipulate selectivities in CE. During the running process, CB[7] bears a positive charge under the studied pH range (pH 2.5-7) and can be adsorbed onto the inner wall of a fused-silica capillary, leading to a reversal of the electroosmotic flow (EOF). Electrophoretic behaviors of nitrotoluene, nitrophenol, nitroaniline, and methylaniline isomers were studied under various conditions. The electrophoretic separations of the isomers can be accomplished with a buffer containing CB[7]. Furthermore, a probable separation mechanism in the presence of CB[7] was also proposed.     

Separation of hyaluronic acid by ultrahigh-voltage capillary gel electrophoresis

Hyaluronic acid was separated using 95 kV applied potential in a polyacrylamide gel-filled capillary. The results of this separation were compared to those obtained using a capillary electrophoresis instrument operated at a more conventional potential of 15 kV. For lower-molecular-weight oligomers, the separation efficiency was found to improve by about tenfold, and the resolution by about threefold. However, the improvement in resolution declined as the polymer molecular weight increased.     

Separation and determination of nitroaniline isomers by capillary zone electrophoresis with amperometric detection

In this paper, capillary zone electrophoresis with amperometric detection (CZE-AD) was firstly applied to the simultaneous separation and determination of nitroaniline positional isomers. The three analytes could be perfectly analyzed by using the buffer of extreme pH. The effects of several important factors were investigated to find optimum conditions. A carbon-disk electrode was used as working electrode. The optimal conditions were 40 mmol/L tartaric acid-sodium tartrate (pH 1.2) as running buffer, 17 kV as separation voltage and 1.10 V (versus saturated calomel reference electrode, SCE) as detection potential. Under the optimum conditions, o-, m- and p-nitroaniline were separated successfully and good linearity, reproducibility and recovery results were obtained. The detection limit for m-nitroaniline was as low as at 9.06 × 10⁻⁹ mol/L. This proposed method demonstrated long-term stability and reproducibility with relative standard deviations of less than 1.8% for migration time and 1.1% for peak areas. The utility of this method was demonstrated by monitoring dyestuff wastewater and the assay results were satisfactory.     

Separation and migration behavior of positional and structural naphthalenesulfonate isomers by cyclodextrin-mediated capillary electrophoresis

The effects of the type of buffer system, buffer pH, the polarity of electrode, and both the type and the concentration of cyclodextrins (CDs) on the separation and migration behavior of seven positional and structural naphthalenesulfonate isomers in CD-mediated capillary electrophoresis were systematically investigated. The most effective separation conditions were to use 20 mM phosphate buffer with beta-CD at pH 3.0, while the polarity of the electrodes were reversed across the capillary. Under such conditions, these isomers can be separated in 10 min. The results also indicate that the interactions of naphthalenesulfonate derivatives with CDs are strongly affected by the position of the substituent(s) on the aromatic ring. The inclusion complex formation constants of these compounds were evaluated to improve our understanding of the interaction between the naphthalenesulfonate derivatives and CDs. Moreover, the formation constants of naphthalene-2-sulfonate to beta-CD agreed closely with the data in the literature obtained by a spectrophotometric method and by CE methods in various pH buffers.     

Separation of divinyl ether fatty acid isomers by micellar electrokinetic chromatography

A micellar electrokinetic chromatography (MEKC) method has been developed for the direct resolution of divinyl ether type of hydrophobic fatty acid isomers. The fatty acid isomers resolved include colneleic acid (CL), colnelenic acid (CLn), 14(Z)-etheroleic acid (14(Z)-EL), 14(Z)-etherolenic acid (14(Z)-Eln), 11(Z)-etheroleic acid (11(Z)-EL), 11(Z)-etherolenic acid (11(Z)-Eln), etheroleic acid (EL) and etherolenic acid (Eln). These fatty acid isomers differ in number, position and spatial arrangement of the double bonds and the position of the ether oxygen. A central composite design was employed for the optimization of the key variables of the separation, namely the concentrations of sodium dodecyl sulfate (SDS) and organic modifiers. The use of micelles combined with an organic modifier in the background electrolyte made it possible to dissolve and separate relatively hydrophobic fatty acid isomers, and to achieve high separation efficiency. Using heptakis-(2,3-dimethyl-6-sulfato)-beta-cyclodextrin (HDMS-beta-CD) as a buffer additive, complete separation of the examined eight divinyl ethers was achieved. Separation efficiencies up to 5 x 10(5) theoretical plates/m were achieved under optimized conditions. Direct UV was applied for detection of the fatty acids. The results were compared with those obtained from high-performance liquid chromatography (HPLC) separation.     

Separation of siderophores by capillary electrophoresis

Capillary electrophoresis (CE) was applied as a fast method of siderophore separation. Siderophores are iron binding and regulating cell products, which facilitate iron transport into cells. A fast and efficient method of siderophore analysis is important for better understanding of the iron pathways in a sea environment or marine organisms. The best results of CE analysis were obtained using free zone CE in 25 mM phosphate buffer at basic pH using a constant voltage of 20 kV. Under these conditions it was possible to detect the presence of siderophores in seawater.     

Separation of bacteria by capillary electrophoresis

Differences in the surface charges of bacteria can be exploited for their separation by capillary electrophoresis. Because of their low electrophoretic mobility, the separation is not always easy to perform, especially in the presence of the electroosmotic flow. Elimination of electroosmotic flow by capillary wall modification with γ‐(trimethoxysilyl)propyl methacrylate followed by acrylamide bonding permits separation over a distance of 8.5 cm.     

毛细管区带电泳对羟基苯甲酸三种异构体的分离研究

考察了邻羟基苯甲酸、间羟基苯甲酸和对羟基苯甲酸在毛细管区带电泳分离时的行为。研究了缓冲液pH、浓度和分离电压对三种羟基苯甲酸异构体分离的影响,结果表明在10 mmol/L Na2HPO4缓冲体系(pH 10.15),运行电压25kV,实验温度25℃的分离条件下,采取压力进样(3.4 kPa×3 s),检测波长210nm;3种异构体在7 min内获得基线分离。邻羟基苯甲酸、间羟基苯甲酸、对羟基苯甲酸在2~100μg/mL范围内,峰面积与质量浓度具有较好的线性关系,检出限分别是0.96,1.27和1.07μg/mL。     

Separation of diadenosine polyphosphates by capillary electrophoresis

The influence of buffer composition and pH on the electrophoretic behavior of diadenosine polyphosphates with a phosphate chain ranging from two to five phosphate groups has been examined. The electrophoretic mobility in carbonate buffer increases according to the number of phosphates, whereas in borate buffer the mobility changes in an irregular way as a function of pH. This finding can be rationalized by a well-known interaction of borate with ribose rings, which modifies the charge and the hydrodynamic radius of each diadenosine polyphosphate in a different way. Our study shows that the best separation of diadenosine polyphosphates can be achieved at the highest pH values of the range examined both in borate and carbonate buffers.     

Separation of nitrophenols by capillary zone electrophoresis

Separation conditions suitable to a rapid resolution of a group of eight nitrophenols by capillary zone electrophoresis (CZE) were found. Required differences in their effective mobilities were achieved via host-guest complexation of -cyclodextrin combined with intermolecular interactions involved by polyvinylpyrrolidone. When both additives were present in the carrier electrolyte at pH=9.1 nitrophenols could be separated in the column of a, 300 m I.D. and 180 mm in the length within 8–9 minutes. It is shown that the column of such an I.D. providing enhanced sample load capacity, can operate with high separation efficiencies as maintaining zone dispersions due to Joule heating on a tolerable level. CZE on-line coupled with isotachophoretic sample pretreatment is shown to provide the concentration limits of detection at low ppb concentrations by using an on-column photometric detector operating at 254 and 405 nm detection wavelengths.     

Separation of metal ions by capillary electrophoresis

A number of experimental parameters have been optimized for the separation of 26 metal ions, including alkali, alkaline earth, transition and lanthanide metal ions. Experimental parameters that were evaluated included nature of indirect-detection reagent, pH of electrolyte, concentration of complexing agent and nature of the surface of the capillary; unbonded and C₁ and C₁₈ bonded phases were studied. In addition the effect of internal diameter on linearity and signal-to-noise ratio was examined, and separation efficiency was determined for a variety of experimental conditions. Detection limits (signal-to-noise RATIO = 3) were ca. 1 μg/ml for the lanthanides, ca. 0.6 μg/ml for transition and alkaline earth ions and ca. 0.1–0.8 μg/ml for alkali metal ions. The average relative standard deviations of were 3.7, 5.1 and 2.5% on unbonded, C₁ and C₁₈ capillaries, respectively. Whereas conventional regression analysis suggested that the calibration curves were linear over the range of 1·10⁻⁵ to 4·10⁻⁴ mol/l, sensitivity plots showed that the results were actually linear to within 6% only over the range of 2.5·10⁻⁵ to 4·10⁻⁴ mol/l.     

Separation of linoleic acid oxidation products by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis

In this work the suitability of micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary electrophoresis (CE) to the analysis of the primary oxidation products of linoleic acid was studied with uncoated fused-silica capillaries. The primary autoxidation products of linoleic acid are the four hydroperoxide isomers 13-hydroperoxy-cis-9, trans-11-octadecadienoic acid, 13-hydroperoxy-trans-9, trans-11-octadecadienoic acid, 9-hydroperoxy-trans-10,cis-12-octadecadienoic acid, 9-hydroperoxy-trans-10, trans-12-octadecadienoic acid. Addition of a surfactant such as sodium dodecyl sulfate (SDS) or sodium cholate (SC) into the running buffer (20-30 mM 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS) or ammonium acetate, pH 9.5-11) was required to enhance the water solubility of the sample and selectivity of the separation. MEKC proved to be a promising new technique for the separation of the primary oxidation products of lipids giving results comparable to high performance liquid chromatography (HPLC). Partial separation of hydroperoxide isomers was also achieved using nonaqueous CE with methanol-acetonitrile-sodium cholate as running buffer.     

Separation of neutral carbohydrates by capillary electrophoresis

The basic strategies for analysis of neutral carbohydrates by capillary electrophoresis are summarized. Neutral carbohydrates are dissociated in strong alkali to give anions, hence they can be separated directly by zone electrophoresis based on the difference between their dissociation constants. However, neutral carbohydrates are not electrically charged under normal conditions. Therefore, they should be converted to ions prior to or during analysis. Precapillary introduction of a basic or an acidic group to a neutral carbohydrate gives the derivative positive (in acidic media) or negative (in alkaline media) charge, respectively. The derivatives thus obtained can be separated by zone electrophoresis. Analysis of carbohydrates in a carrier containing an oxyacid salt (such as sodium borate) or an alkaline metal salt (such as calcium acetate) causes in situ conversion to anionic or cationic complexes, respectively, which are separated by zone electrophoresis. The effective uses of electrokinetic chromatography in sodium dodecyl sulfate micelles for hydrophobic derivatives (such as 1-phenyl-3-methyl-5-pyrazolone derivatives) and size-exclusion electrophoresis in gel-packed capillaris for size different oligosaccharides are also discussed. Each separation mode has its inherent method(s) for detection, which are also described here.     

Separation of cis/trans geometrical fatty acid isomers by silver-exchanged zeolite Y

The separation of cis and trans isomers is relevant for biological and nutritional applications, silver-exchanged zeolite Y was prepared and applied for the treatment of mixtures of cis and trans geometrical isomers of mono- and polyunsaturated fatty acid methyl esters (FAMEs). cis FAMEs were adsorbed into zeolite with a high degree of selectivity (cis/trans ratio in the range of 1.9-3.2). The effectiveness was due to the synergism of the π-complexation between the silver ion and the double bonds and the different FAME structures trapped into the zeolite cages. Some indication of the complex stabilities came from theoretical studies using unsaturated lipids. A prototype cartridge was also designed for application in the fractionation of cis/trans FAME mixtures.     

Separation and analysis of nitrophenol isomers by capillary isotachophoresis

The separation and quantification of nitrophenol isomers in aqueous solutions by capillary isotachophoresis has been studied. Several electrolyte systems with different leading and terminating ions were used. The separation was carried out in a PTFE column in a device for column-coupling system.     

Separation of the positional isomers of phthalic acids in hydroorganic solvents using capillary electrophoresis

The positional isomers of phthalic acids (ortho-, meta-, and para-) and benzoic acid could be completely separated by capillary electrophoresis (CE). A simple CE method employing direct detection in mixed methanol/water buffers is presented. The effect of the electrolyte buffer system, including pH, buffer concentration, and organic solvent on the electrophoretic mobility of the analytes, is investigated. The electroosmotic flow is reversed using cationic surfactant and cetyltrimethylammonium bromide so that anions are separated under the co-EOF mode. The resolution of the analytes and selectivity could be improved by the adjustment of the methanol content. Ion association with the surfactant in methanol/water buffer is discussed. The validity of the method in terms of sensitivity, reproducibility, and linearity is also reported. The text was submitted by the authors in English.     

Resolution of structural isomers of sialylated oligosaccharides by capillary electrophoresis

The resolution of structural isomers in mixtures of oligosaccharides is often challenging. Capillary electrophoresis was employed to separate three sets of structural isomers of sialylated oligosaccharides found in human milk and bovine colostrum. Different running buffers were necessary to achieve optimal baseline resolution. To resolve 3'- and 6'-sialyllactoses, 0.2 M aqueous sodium phosphate containing 40% methanol as an organic modifier was used as a running buffer. To resolve 3'- and 6'-sialyllactosamines, 0.4 M aqueous sodium phosphate without organic modifier was used. Baseline resolution of sialyllacto-N-tetraose-a and -b and sialyllacto-N-neotetraose-c was achieved with a 0.4 M Tris-HCl buffer containing 250 mM sodium dodecyl sulfate and 10% methanol as the organic modifier. Thus, each of these sets of structural isomers of sialylated oligosaccharides required a unique running buffer with respect to buffer type, concentration, pH, presence of organic modifiers, and surfactants. Similar electrophoresis conditions may be useful for resolving and analyzing other structural isomers of acidic oligosaccharides by capillary electrophoresis.