Methyl transfer from a hydrophobic vitamin B12 derivative to arsenic trioxide

The methylation reaction of arsenic trioxide conducted at 37 °C and pH 7.0 for 24 h using hydrophobic methylated vitamin B₁₂, (methyl) (aquo) heptamethylcobyrinate perchlorate, CH₃B₁₂ ester, as a methyl donor in the presence of reduced glutathione (GSH) yielded monomethylarsonous acid (MMA), dimethylarsinic acid (DMA), and trimethylarsine oxide (TMAO) as products with a methylation rate over 95%. In contrast, when methylcobalamin (CH₃B₁₂) was used as the methyl donor, only MMA and DMA were produced and the methylation rate dropped to around 20%. Reductive demethylation of a methyl-corrinoid coordination complex mediated by GSH is suggested as a mechanism of methyl transfer to arsenic trioxide. The differences observed for different corrinoid coordination complexes with respect to the reactivity of methyl transfer to arsenic is ascribable to differences inherent in the base-on (CH₃B₁₂) and base-off (CH₃B₁₂ ester) natures of the compounds.     

Iodination of cisplatin adduct of Vitamin B12 [{B12}-CN-{cis-PtCl(NH3)2}]

The cisplatin adduct of vitamin B₁₂, [{B₁₂}-CN-{cis-PtCl(NH₃)₂}]⁺ (1), reacts with iodide in aqueous solution to form [{B₁₂}-CN-{trans-PtI₂(NH₃)}] (3) in good yield. Mono-substitution of chloride was not observed since a subsequent replacement of one NH₃ by a second iodide is very fast as compared to the Cl⁻ → I⁻ exchange. The same reaction conditions allowed to introduce radioiodide ¹³¹I. Vitamin B₁₂ can therefore be labeled with radionuclides via binding to the Pt(II) center.     

Determination of the bond-angle distribution in vitreous B2O3 by B double rotation (DOR) NMR spectroscopy

The B–O–B bond angle distributions for both ring and non-ring boron sites in vitreous B₂O₃ have been determined by ¹¹B double rotation (DOR) NMR and multiple-quantum (MQ) DOR NMR. The [B₃O₆] boroxol rings are observed to have a mean internal B–O–B angle of 120.0±0.7° with a small standard deviation, σ_R=3.2±0.4°, indicating that the rings are near-perfect planar, hexagonal structures. The rings are linked predominantly by non-ring [BO₃] units, which share oxygens with the boroxol ring, with a mean B_ring–O–B_non-ring angle of 135.1±0.6° and σ_NR=6.7±0.4°. In addition, the fraction of boron atoms, f, which reside in the boroxol rings has been measured for this sample as f=0.73±0.01.     

Dipstick based immunochemiluminescence biosensor for the analysis of vitamin B12 in energy drinks: A novel approach

In this article, we describe a dipstick based immunochemiluminescence (immuno-CL) biosensor for the detection of vitamin B₁₂ in energy drinks. The method is a direct competitive type format involving the immobilization of vitamin B₁₂ antibody on nitrocellulose membrane (NC) followed by treatment with vitamin B₁₂ and vitamin B₁₂–alkaline phosphatase conjugate to facilitate the competitive binding. The dipstick was further treated with substrate disodium 2-chloro-5-(4-methoxyspiro {1,2-dioxetane-3,2¢-(5¢-chloro)tricyclo[3.3.1.13,7]decan}-4-yl)-1-phenyl phosphate (CDP-Star) to generate chemiluminescence (CL). The number of photons generated was inversely proportional to the vitamin B₁₂ concentration. After systematic optimization, the limit of detection was 1 ng mL⁻¹. The coefficient of variation was below 0.2% for both intra- and inter-assay precision. Vitamin B₁₂ was extracted from energy drinks with recovery ranged from 90 to 99.4%. Two different energy drinks samples were analyzed, and a good correlation was observed when the data were compared with a reference enzyme linked immuno sorbent assay (ELISA) method. The developed method is suitable for an accurate, sensitive, and high-throughput screening of vitamin B₁₂ in energy drinks samples. The dipstick technique based on immuno-CL is suitable for the detection of several analyte in food and environmental samples.     

High-pressure preparation, crystal structure, and properties of the new rare-earth oxoborate β-Dy2B4O9

In this work we report about a new rare-earth oxoborate β-Dy₂B₄O₉ synthesized under high-pressure/high-temperature conditions from Dy₂O₃ and boron oxide B₂O₃ in a B₂O₃/Na₂O₂ flux with a walker-type multianvil apparatus at 8 GPa and 1000°C. Single crystal X-ray structure determination of β-Dy₂B₄O₉ revealed: , a=616.2(1) pm, b=642.8(1) pm, c=748.5(1) pm, α=102.54(1)°, β=97.08(1)°, γ=102.45(1)°, Z=2, R1=0.0151, wR₂=0.0475 (all data). The compound exhibits a new structure type which is built up from bands of linked BO₃- (Δ) and tetrahedral BO₄-groups (□). The Dy³⁺-cations are positioned in the voids between the bands. According to the conception of fundamental building blocks β-Dy₂B₄O₉ can be classified with the notation 2Δ6□:Δ3□=4□=3□Δ. Furthermore we report about temperature-resolved in situ powder diffraction measurements and IR-spectroscopic investigations on β-Dy₂B₄O₉.     

Solid-solid synthesis of a hydrophobic vitamin B12 having a benzo-18-crown-6 moiety at the C10 position of the corrin ring

A new hydrophobic vitamin B₁₂ having a benzo-18-crown-6 moiety at the C-10 position of the corrin ring was synthesized by solid-state condensation reaction. The proton NMR titration study in acetonitrile exhibits a potassium ion binding behavior of the hydrophobic vitamin B₁₂ at the benzo-18-crown-6 moiety.     

HPLC-ESI-MS analysis of Vitamin B12 in food products and in multivitamins-multimineral tablets

Methods for the determination of Vitamin B₁₂ remain limited due to their low sensitivity and poor selectivity. In the present work, a simple and sensitive HPLC-ESI-MS method for determining Vitamin B₁₂ in food products and in multivitamin-multimineral tablets was developed. Vitamin B₁₂ was extracted from food products with 50 mM sodium acetate buffer (pH 4.0) in the presence of sodium cyanide. Total Vitamin B₁₂ content in food product can be obtained by efficient enzymatic hydrolysis to release the bound Vitamin B₁₂. Vitamin B₁₂ was quantified with ginsenoside Re as internal standard (I.S.) after their separations on a C₁₈ column with a gradient of mobile phase made of water and acetonitrile. MS with SIR mode at m/z 930.8 was used for Vitamin B₁₂ quantification. The calibration graphs plotted with five concentrations of Vitamin B₁₂ was linear with a regression coefficient r² = 0.9994. The intra-assay R.S.D. and the inter-assay R.S.D. were 2.6% (n = 5) and 3.5% (n = 6), respectively. The recoveries evaluated at spiking three different concentrations on fortified products were above 93%. The method has been applied successfully in the determination of Vitamin B₁₂ in fortified food products and multivitamin-multimineral tablets.     

La3Ru8B6 and Y3Os8B6, new members of a homologous series R(A)nM3n−1B2n

Two new compounds, La₃Ru₈B₆ and Y₃Os₈B₆, were synthesized by arc melting the elements. Their structural characterization was carried out at room temperature on as-cast samples by using X-ray diffractometry. According to X-ray single-crystal diffraction results these borides crystallize in Fmmm space group (no. 69), Z=4, a=5.5607(1) Å, b=9.8035(3) Å, c=17.5524(4) Å, ρ=8.956 Mg/m³, μ=25.23 mm⁻¹ for La₃Ru₈B₆ and a=5.4792(2) Å, b=9.5139(4) Å, c=17.6972(8) Å, ρ=13.343 Mg/m³, μ=128.23 mm⁻¹ for Y₃Os₈B₆. The crystal structure of La₃Ru₈B₆ was confirmed from Rietveld refinement of X-ray powder diffraction data. Both La₃Ru₈B₆ and Y₃Os₈B₆ compounds are isotypic with the Ca₃Rh₈B₆ compound and their structures are built up from CeCo₃B₂-type and CeAl₂Ga₂-type structural fragments taken in ratio 2:1. They are the members of structural series R(A)_nM_3n−1B_2n with n=3 (R is the rare earth metal, A the alkaline earth metal, and M the transition metal). Structural and atomic parameters were also obtained for La_0.94Ru₃B₂ compound from Rietveld refinement (CeCo₃B₂-type structure, P6/mmm space group (no. 191), a=5.5835(9) Å, c=3.0278(6) Å).     

Polyol-mediated synthesis of Li4Ti5O12 nanoparticle and its electrochemical properties

Li₄Ti₅O₁₂ nanoparticles were precipitated from ethylene glycol solution of titanium tetra isopropoxide (Ti(O-iPr)₄) and Li₂O₂ by refluxing at 197 °C for 12 h. The obtained particles were filtered and dried at 100 °C for 12 h, and the dried powder samples were heated at 320, 500 and 800 °C for 3 h. The X-ray diffraction patterns of the obtained samples exhibited a good fit with the spinel phase. The field emission-SEM images of the dried powder sample and the samples heated at 320, 500 and 800 °C for 3 h showed a uniform spherical morphology with a particle size of 5, 8, 10 and 400 nm, respectively. According to the results of electrochemical testing, the dried powder sample and the samples heated at 320, 500, and 800 °C for 3 h showed initial capacities of 200, 310, 320, and 260 mA h/g, respectively, at a current density of 0.05 mA/cm². Nanosized (6–8 nm) particles with good crystallinity were obtained by controlling the synthesis conditions. The sample heated at 500 °C for 3 h exhibited a high capacity and an excellent rate capability over 60 cycles.     

Deactivation and regeneration of the B2O3/TiO2-ZrO2 catalyst in the vapor phase Beckmann rearrangement of cyclohexanone oxime

The deactivation and regeneration of B₂O₃/TiO₂-ZrO₂ catalyst for the vapor phase Beckmann rearrangement of cyclohexanone oxime to -caprolactam were studied. The fresh, deactivated and regenerated catalysts were characterized by using adsorption of nitrogen, X-ray diffraction (XRD), thermogravimetry (TG) and NH₃-temperature-programmed desorption (NH₃-TPD) techniques. The crystal structure and pore size distribution of the catalyst were retained after reaction, but the number of acid sites decreased significantly. There was a relationship between the amount of coke deposited on the catalyst and the decline in catalytic activity. These results suggest that the coke deposition on the surface of catalyst is mainly responsible for the catalyst deactivation. The catalytic activity can be recovered completely after calcining the deactivated catalyst in air flow at 600 °C for 8 h.     

Directional crystallization of B4C-NbB2 and B4C-MoB2 eutectic compositions

We studied the directional crystallization of different compositions in B₄C-NbB₂ and B₄C-MoB₂ systems. The eutectic compositions for both systems are evaluated. It is shown that in the first system the rod-like eutectic structure is formed, in second, the “Chinese hieroglyphics”. In both cases high hardness and high microplasticity are observed, which are much more than for individual component phases. These compositions may be considered as a new kind of self-strengthening composite materials.     

Non-centrosymmetric Ba3Ti3O6(BO3)2

The compound previously reported as Ba₂Ti₂B₂O₉ has been reformulated as Ba₃Ti₃B₂O₁₂, or Ba₃Ti₃O₆(BO₃)₂, a new barium titanium oxoborate. Small single crystals have been recovered from a melt with a composition of BaTiO₃:BaTiB₂O₆ (molar ratio) cooled between 1100°C and 850°C. The crystal structure has been determined by X-ray diffraction: hexagonal system, non-centrosymmetric space group, a=8.7377(11) Å, c=3.9147(8) Å, Z=1, wR(F²)=0.039 for 504 unique reflections. Ba₃Ti₃O₆(BO₃)₂ is isostructural with K₃Ta₃O₆(BO₃)₂. Preliminary measurements of nonlinear optical properties on microcrystalline samples show that the second harmonic generation efficiency of Ba₃Ti₃O₆(BO₃)₂ is equal to 95% of that of LiNbO₃.     

Synthesis and characterization of vitamin B12-hyperbranched polymer

Vitamin B₁₂-hyperbranched polymer was synthesized and characterized by UV-vis and NMR spectroscopy as well as DLS. The shape of hybrid polymer was also directly observed by TEM. Microenvironmental polarity around vitamin B₁₂ derivative on the polymer was evaluated by UV-vis absorption peak with α-band of vitamin B₁₂ chromophore.     

The study of Bi3B5O12: synthesis, crystal structure and thermal expansion of oxoborate Bi3B5O12

The paper presents a new data on the crystal structure, thermal expansion and IR spectra of Bi₃B₅O₁₂. The Bi₃B₅O₁₂ single crystals were grown from the melt of the same stoichiometry by Czochralski technique. The crystal structure of Bi₃B₅O₁₂ was refined in anisotropic approximation using single-crystal X-ray diffraction data. It is orthorhombic, Pnma, a=6.530(4), b=7.726(5), c=18.578(5) Å, V=937.2(5) Å³, Z=4, R=3.45%. Bi³⁺ atoms have irregular coordination polyhedra, Bi(1)O₆ (d(B-O)=2.09-2.75 Å) and Bi(2)O₇ (d(B-O)=2.108-2.804 Å). Taking into account the shortest bonds only, these polyhedra are considered here as trigonal Bi(1)O₃ (2.09-2.20 Å) and tetragonal Bi(2)O₄ (2.108-2.331 Å) irregular pyramids with Bi atoms in the tops of both pyramids. The BiO₄ polyhedra form zigzag chains along b-axis. These chains alternate with isolated anions [B₂^IVB₃^IIIO₁₁]⁷⁻ through the common oxygen atoms to form thick layers extended in ab plane. A perfect cleavage of the compound corresponds to these layers and an imperfect one is parallel to the Bi-O chains. The Bi₃B₅O₁₂ thermal expansion is sharply anisotropic (α₁₁≈α₂₂=12, α₃₃=3×10⁻⁶ °C⁻¹) likely due to a straightening of the flexible zigzag chains along b-axis and decreasing of their zigzag along c-axis. Thus the properties like cleavage and thermal expansion correlate to these chains.     

Vitamin B12-mediated electrochemical cyclopropanation of styrene

Vitamin B₁₂ (a cobalt corrin complex) mediated the reduction of methylene chloride in the presence of styrene to give cyclopropylbenzene in quantitative yields in DMF containing tetrabutylammonium bromide (TBAB) and acetic acid with current efficiency 45% and turnover rate 4-fold larger than a typical vitamin B₁₂-mediated 6-membered ring cyclization. A pathway involving formation and electroreductive cleavage of a chloromethylene-Co^III intermediate to yield a chloromethylene radical that adds to styrene is suggested. The reaction is highly sensitive to solvent composition, and water in the solvent acts as a proton donor to facilitate production of 1-chloro-3-phenylpropane in a competitive pathway.

Graphical Abstract

 

Full-size image (6K)

 

Multianvil high-pressure/high-temperature preparation, crystal structure, and properties of the new oxoborates Dy4B6O14(OH)2 and Ho4B6O14(OH)2

This paper reports about two new hydrogen-containing rare-earth oxoborates RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho) synthesized under high-pressure/high-temperature conditions from the corresponding rare-earth oxides, boron oxide, and water using a Walker-type multianvil equipment at 8 GPa and 880 °C. The single crystal structure determination of Dy₄B₆O₁₄(OH)₂ showed: Pbcn, a=1292.7(2), b=437.1(2), , Z=2, R1=0.0190, and wR2=0.0349 (all data). The isotypic holmium species revealed: Pbcn, a=1292.8(2), b=436.2(2), , Z=2, R1=0.0206, and wR2=0.0406 (all data). The compounds exhibit a new type of structure, which is built up from layers of condensed BO₄-tetrahedra. Between the layers, the rare-earth cations are coordinated by 7+2 oxygen atoms. Furthermore, we report about temperature-resolved in situ powder diffraction measurements, DTA/TG, and IR-spectroscopic investigations into RE₄B₆O₁₄(OH)₂ (RE=Dy, Ho).     

Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

Preparation and characterization of spherical V2O3 nanopowder

V₂O₃ nanopowder with spherical particles was prepared by reducing pyrolysis of the precursor, (NH₄)₅[(VO)₆(CO₃)₄(OH)₉]·10H₂O, in H₂ atmosphere. The thermolysis process of the precursor in a H₂ flow was investigated by thermogravimetric analysis and differential thermal analysis. The results indicate that pure V₂O₃ forms at 620°C and crystallizes at 730°C. The effects of various reductive pyrolysis conditions on compositions of V₂O₃ products were studied. Scanning electron micrographs show that the particles of the V₂O₃ powder obtained at 650°C for 1 h are spherical about 30 nm in size with more homogeneous distribution. Experiments show that nanopowder has larger adsorption capacity to gases and is more easily reoxidized by air at room temperature than micropowder. Differential scanning calorimetry experiment indicates that the temperature of phase transition of nano-V₂O₃ powder is −119.5°C on cooling or −99.2°C on heating. The transition heats are −12.55 J g⁻¹ on cooling and 11.42 J g⁻¹ on heating, respectively.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Crystal-chemistry of mullite-type aluminoborates Al18B4O33 and Al5BO9: A stoichiometry puzzle

Orthorhombic Al₂O₃-rich aluminoborate is an important ceramic material for which two slightly different compositions have been assumed: Al₅BO₉ (5Al₂O₃:B₂O₃) and Al₁₈B₄O₃₃ (9Al₂O₃:2B₂O₃). The formula Al₁₈B₄O₃₃ (=Al_4.91B_1.09O₉) was derived from results of chemical analyses when crystal structure data were not yet available. Subsequent structural investigations indicated Al₅BO₉ composition. Nevertheless, Al₁₈B₄O₃₃ was still accepted as the correct stoichiometry assuming that additional B replaces 9% Al.Powder samples of both compositions and ones with excess boron were prepared by solid state reactions between α-Al₂O₃ and B₂O₃/H₃BO₃ at temperatures above 1100 °C and single-crystals were grown from flux at 1100 and 1550 °C. Products were investigated by single-crystal and powder XRD, ¹¹B and ²⁷Al solid-state MAS-NMR, Raman and FTIR spectroscopy as well as Laser-ablation ICP-MS. No indication of the predicted 9% B→Al substitution was found. LA ICP-MS indicated 12.36(27) wt% B₂O₃ corresponding to Al_4.97B_1.03O₉. Hence, the suggested Al₁₈B₄O₃₃ stoichiometry can be excluded for all synthesized samples. A very low amount of Al vacancies at a five-fold coordinated site are likely, charge balanced by an additional nearby three-fold coordinated B site. All evidences indicate that the title compound should be reported as Al_5−xB_1+xO₉ with x<0.038(6), which is close to Al₅BO₉.