H2S-promoted thermal isomerization of cis-2-pentene to 1-pentene and trans-2-pentene around 800 K

H₂S accelerates the thermal isomerization of cis-2-pentene (P2c) to 1-pentene (P1) and trans-2-pentene (P2t) to around 800 K. This effect is interpreted on the basis of a free radical mechanism in which 2-pentenyl and thiyl radicals are the main chain carriers. P1 formation is essentially explained by the competing processes: P2t formation is due to addition-elimination processes: the importance of which has been evaluated against process (?4μ): The following ratios of rate constants have been measured and are discussed: (RT in cal mol^?1).     

Skeletal isomerization of 1-pentene

Series of ZSM-5 and Y zeolite catalysts have been prepared. Zeolites were submitted to ion exchange, drying, formation with 50 wt.% of aluminium hydroxide as a binder and then to final thermal treatment. Determination of catalysts activity in 1-pentene isomerization reaction was carried out in the temperature range of 175–325°C. The highest activity in isomerization reaction was attained in the presence of ZSM-5 zeolite catalysts with strong and medium strength acidity.     

Temperature dependence of the rate constants of the reactions of oxygen atoms with 1-pentene, 1-hexene,cis-2-pentene,and trans-2-pentene

The kinetics of the reactions of ground state oxygen atoms with 1-pentene, 1-hexene, cis-2-pentene, and trans-2-pentene was investigated in the temperature range 200 to 370 K. In this range the temperature dependences of the rate constants can be represented by k = A′ Tⁿ exp(− E′_a/RT) with A′ = (1.0 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.13 ± 0.02, E′_a = 0.54 ± 0.05 kJ mol⁻¹ for 1-pentene: A′ = (1.3 ± 1.2) · 10⁻¹⁴ cm³ s⁻¹, n = 1.04 ± 0.08, E′_a = 0.2 ± 0.4 kJ mol⁻¹ for 1-hexene; A′ = (0.6 ± 0.6) · 10⁻¹⁴ cm³ s⁻¹, n = 1.12 ± 0.05, E′_a = − 3.8 ± 0.8 kJ mol⁻¹ for cis-2-pentene; and A′ = (0.6 ± 0.8) · 10⁻¹⁴ cm³ s⁻¹, n = 1.14 ± 0.06, E′_a = − 4.3 ± 0.5 kJ mol⁻¹ for trans-2-pentene. The atoms were generated by the H₂-laser photolysis of NO and detected by time resolved chemiluminescence in the presence of NO. The concentrations of the O(³P) atoms were kept so low that secondary reactions with products are unimportant. © 1997 John Wiley & Sons, Inc.     

Rhodium-Catalyzed Deuterioformylation of 3-Methyl-1-pentene

3-Methyl-1-pentene was deuterioformylated in the presence of rhodium-catalyst. The extent of attack on each face of the olefin was evaluated from the diastereomeric composition of both positional isomers obtained as the products. An overall preferred attack on the si-si face of the (S)-enantiomer, and on the re-re face of the (R)-enantiomer was found.     

沸石催化的2,4,4-三甲基-1-戊烯的酰化反应

通过HY沸石与某些传统催化剂的比较，发现HY在2，4，4-三甲基-1-戊烯与乙酸酐的酰化反应中比那些传统催化剂更有效．用HY沸石作催化剂，室温下通过2，4，4-三甲基-1-戊烯与乙酸酐的酰化反应，合成了三种异构体，即4-（2，2-二甲基丙基）-4-戊烯-2-酮、（E）-4，6，6-三甲基-4-庚烯-2-酮和（Z）-4，6，6-三甲基-4-庚烯-2-酮．考察了HY沸石的用量对该酰化反应的影响．当2，4，4-三甲基-1-戊烯／乙酸酐／HY沸石=1mmol／10mmol／0．250g，反应温度25℃、反应时间2h时，生成的三种异构体产率之和为72％，HY沸石对于该反应具有极好的选择性和优良的活性稳定性，不同阳离子交换的Y沸石也用于催化2，4，4-三甲基-1-戊烯的酰化反应。     

TS-1 zeolite microengineered reactors for 1-pentene epoxidation

A zeolite-based microengineered reactor was fabricated and tested for 1-pentene epoxidation over titanium silicalite-1 (TS-1) catalyst, which has been selectively incorporated within the microreactor channel using a new synthesis procedure.     

Synthesis of exo- and endobrevicomines from 1,1,5-trichloro-1-pentene

Conclusions A synthesis was described for exo- and endobrevicomies from 1,1,5-trichloro-1-pentene through the ethyleneketal of 6-nonyn-2-one.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2633–2635, November, 1984.     

Radiation-induced copolymerization of hexafluoroacetone with 2-methyl-1-pentene

Copolymerization of hexafluoroacetone (HFA) with 2-methyl-1-pentene (2MP) in trichlorotrifluoroethane (R-113) was carried out by γ-ray irradiation in a low-temperature region of ?100 to 0°C. Though HFA does not homopolymerize and 2MP scarcely does, the copolymerization took place at various monomer compositions. The copolymerization rate and the molecular weight in the low-temperature region were much higher than those at 0°C. Above room temperature the copolymerization did not take place and only the adduct of monomers was formed. The copolymerization was inhibited to some extent by cation scavengers, but not by radical or electron scavengers. Elemental analysis and nuclear magnetic resonance (NMR) spectra show that the copolymer consists of almost equimolar monomer units and has two types of structure, head to tail and head to head or tail to tail. It has been concluded that copolymerization probably proceeds via a cationic mechanism to form an alternating copolymer.     

Specific rearrangements of 2,4-dimethyl-1-pentene upon electron-impact

A mass spectrometric investigation at 70 eV and at low voltage of specifically deuterated and undeuterated 2,4-dimethyl-1-pentene is reported, in order to illustrate the specificity of the degradation reactions occurring under electron-impact. A mechanism for the skeletal rearrangement of the molecular ion prior to fragmentation is proposed.     

Photochemistry of 5-phenyl-1-pentene in the gas phase

The photochemistry of the title compound has been studied in the gas phase using 254-nm irradiation. In addition to meta cycloadducts analogous to those observed in solution, population of S1(vib) in the gas phase gives several products, the relative amounts of which depend on quencher gas pressure but not on excitation wavelength. For example, in the absence of butane, the major photoproduct is compound 5. This product is formed by a [1,5] hydrogen shift in the primary photoproduct, compound 4. Compound 4 is an intramolecular meta cycloadduct that is generated in the gas phase with sufficient excess vibrational energy to undergo rearrangement unless quencher gas is present. Likewise, there is evidence that two other meta cycloadducts (2 and 3) are also formed with appreciable vibrational energy in the absence of a quencher gas. A unique intramolecular ortho cycloadduct is also formed from 1 but only within a narrow range of quencher gas pressures. This is a two-photon product, with the initial cycloadduct (11) ring opening to a cyclooctatriene (12) that photochemically closes to 6. The pressure dependence of this ortho cycloaddition may be due to a requirement for vibrational deactivation of 11 (Scheme 5) or a precursor species (Scheme 6). The overall chemistry is outlined in Scheme 7.     

Iridium-catalyzed α-selective deuteration of alcohols

The development of chemoselective C(sp³)-H deuteration is of particular interest in synthetic chemistry. We herein report the α-selective, iridium(iii)-bipyridonate-catalyzed hydrogen(H)/deuterium(D) isotope exchange of alcohols using deuterium oxide (D₂O) as the primary deuterium source. This method enables the direct, chemoselective deuteration of primary and secondary alcohols under basic or neutral conditions without being affected by coordinative functional groups such as imidazole and tetrazole. Successful substrates for deuterium labelling include the pharmaceuticals losartan potassium, rapidosept, guaifenesin, and diprophylline. The deuterated losartan potassium shows higher stability towards the metabolism by CYP2C9 than the protiated analogue. Kinetic and DFT studies indicate that the direct deuteration proceeds through dehydrogenation of alcohol to the carbonyl intermediate, conversion of [Ir^III–H] to [Ir^III−D] with D₂O, and deuteration of the carbonyl intermediate to give the α-deuterated product.

An α-selective, iridium(iii)-bipyridonate-catalyzed hydrogen isotope exchange of alcohols using D₂O has been developed for the direct, chemoselective deuteration of primary and secondary alcohols, thereby providing deuterated bioactive molecules.     

Synthesis and NMR analysis of 2,4-dichloro-1-pentene and of 2,4-dichloro-1-pentene-1-d1

The compound 2,4-dichloro-1-pentene-1-d₁ ( 1 ) was synthesized starting from and CH?CNa. In the last stage of the synthesis on activated carbon-HgCl₂ catalyst), ( 3 ) were formed together with ( 1 ). The NMR parameters of ( 1 ), its cis and trans isomers and ( 2 ) were obtained in C₆D₆ solution at 100 MHz. Theoretical spectra of ( 1 ) at 60 MHz were simulated with the aid of a computer, using as input the NMR parameters obtained at 100 MHz and good agreement with the experiment was obtained.