染料敏化纳米晶薄膜太阳电池

文章介绍了一种新型的太阳电池——染料敏化纳米晶薄膜太阳电池的基本工作原理、目前研究的重点和进展以及应用前景和存在的问题，文章指出，这种新型的太阳电池以其制作简单并且具有进一步提高效率和降低成本的潜在优势，可以成为非晶硅太阳电池的有力竞争者。     

Properties of nanocrystalline TiO2 synthesized in premixed flames stabilized on a rotating surface

The properties of TiO₂ nanoparticles synthesized using the flame stabilized on a rotating surface method (FSRS) are investigated. The method uses a laminar, premixed, stagnation flame, combining particle synthesis and film deposition in a single step. The current study examines the effects of flame properties on particle characteristics. Synthesized particles were characterized using X-ray diffractometry, Transmission Electron Microscopy and UV–vis spectrometry in order to quantify the effects of equivalence ratio and precursor loading on particle size, crystallinity and optical band-gap. Results show that flame stoichiometry significantly affects crystal phase, but it has little to no effect on particle size and light absorption band edge. In addition, precursor loading impacts both the particle size and the crystal phase. The study demonstrates the potential of the FSRS method for producing tailored nanoscale TiO₂ particles for a variety of applications.     

Dye solar cells efficiency maps: a parametric study

In this work we present a numerical simulation of a dye solar cell efficiency using a drift-diffusion model for the complete cell. The physical parameters such as the active layer thickness, the electron mobility and the dye spectrum are varied systematically in a range of values individuated experimentally, in order to obtain efficiency maps that reveal interesting features in this kind of devices.     

Edge flames stabilized in a non-premixed microcombustor

The dynamics of an edge flame confined in a non-premixed microcombustor model is studied numerically within the context of a diffusive-thermal model. Fuel and oxidizer, separated upstream by a thin plate, flow through a channel with a prescribed velocity. At the tip of the plate, the fuel and oxidizer mix and, when ignited, an edge flame is sustained at some distance from the plate. The objective in this work is to consider the effects of confinement, differential diffusion, and heat loss on the dynamics of an edge flame in a narrow channel. We consider a wide range of channel widths and allow for changing Lewis numbers, and both adiabatic conditions and heat losses along the channel walls. The results illustrate how the flame shape and standoff distance are affected by the channel width, by mixture composition through variations in Lewis numbers and by heat losses. Conditions for flame stabilization, flame oscillations and flame extinction or blowoff are predicted.     

Electro-hydrodynamic fabrication of ZnO-based dye sensitized solar cells

The electro-hydrodynamic (EHD) technique has been successfully applied for manufacturing ZnO photoanode in dye sensitized solar cells (DSSCs). Porous structure of ZnO film after calcinations was beneficial to the absorption of dye and infiltration of electrolyte. By using ionic liquid as an electrolyte, a high short-circuit photocurrent density of 12.1 mA/cm² was attained and the overall photo-to-electric energy conversion efficiency (η) was 3.4% under an AM-1.5 illumination at 100 mW/cm². At the same time, the influence factors on the solar cell performance, such as the concentrations of polyvinyl alcohol (PVA) during EHD process and light intensity were discussed. PACS 81.07.Bc; 84.60.Jt; 81.15.Rs     

Polygons on a rotating fluid surface

We report a novel and spectacular instability of a fluid surface in a rotating system. In a flow driven by rotating the bottom plate of a partially filled, stationary cylindrical container, the shape of the free surface can spontaneously break the axial symmetry and assume the form of a polygon rotating rigidly with a speed different from that of the plate. With water, we have observed polygons with up to 6 corners. It has been known for many years that such flows are prone to symmetry breaking, but apparently the polygonal surface shapes have never been observed. The creation of rotating internal waves in a similar setup was observed for much lower rotation rates, where the free surface remains essentially flat [J. M. Lopez, J. Fluid Mech. 502, 99 (2004). We speculate that the instability is caused by the strong azimuthal shear due to the stationary walls and that it is triggered by minute wobbling of the rotating plate.     

Improvement in dye sensitized solar cells from past to present

Several emerging renewable technologies are available to satisfy the current energy demand and to minimize the effect of environmental degradation caused by high consumption of fossil fuels. These technologies are not mature enough to solve this problem but require more time for improving the efficiency, and cost reduction to become the economical alternative of fossil fuels. In this paper Dye-sensitized solar cell (DSSC) has been discussed in detail owing to advancement in the technology. Since each component of DSSC is responsible for a specific function, therefore, comprehensive literature studies has been done on individual section to understand the technology in depth. All the advancement in sensitizer, semiconductors, electrolyte, electrodes, additives, sealing and anchoring groups are included in this review with performance parameter of DSSC. Focus of this article is to provide summary of all available literature since beginning to date.     

Effect of Lewis number on premixed laminar lean-limit flames stabilized on a bluff body

In this paper, we present a study on the effect of Lewis number, Le, on the stabilization and blow-off of laminar lean limit premixed flames stabilized on a cylindrical bluff body. Numerical simulations and experiments are conducted for propane, methane and two blends of hydrogen with methane as fuel gases, containing 20% and 40% of hydrogen by volume, respectively. It is found that the Le?>?1 flame blows-off via convection from the base of the flame (without formation of a neck) when the conditions for flame anchoring are not fulfilled. Le?≤?1 flames exhibit a necking phenomenon just before lean blow-off. This necking of the flame front is a result of the local reduction in mass burning rates causing flame merging and quenching of the thin flame tube formed. The structure of these flames at the necking location is found to be similar to tubular flames. It is found that extinction stretch rates for tubular flames closely match values at the neck location of bluff-body flames of corresponding mixtures, suggesting that excessive flame stretch is directly responsible for blow-off of the studied Le?≤?1 flames. After quenching of the neck, the upstream part forms a steady and stable residual flame in the wake of the bluff body while the downstream part is convected away.     

Highly effective III-V solar cells by controlling the surface roughnesses

An advanced approach to minimize the light loss was discussed for III-V solar cells, by controlling the roughnesses of the device surface. Adhesives with different viscosities were applied to bond the III-V solar cells with the supporting substrate before the epitaxial lift-off process. The surface roughness of the III-V solar cells with epoxy adhesive (R_rms = 15.4 nm) is one order of magnitude higher than that with acrylic adhesive (R_rms = 1.6 nm), due to the differences in viscosity, resulting from the spreadability while being hardened. This roughness has increased the reflectance in the wavelength between 650 and 900 nm, implying that this reflectance is influenced by the rear surface of the solar cell. The device performance of the double-junction solar cells (Ga_0.5In_0.5P- and GaAs- based) also reflects the effect of the reflectance. The solar cell with the epoxy adhesive exhibited ~2% increase of the conversion efficiency than that with the acrylic adhesive, mainly due to the increased current density. The integrated current density from the external quantum efficiency (EQE) also exhibited ~2% increase only in the bottom (GaAs-based) cell, corresponding to the higher reflectance for red and near-infrared wavelength ranges.     

Ordered porous TiO2 films obtained by freezing and the application in dye sensitized solar cells

TiO₂ films with ordered porous structure were prepared by freezing. By simply freezing wet TiO₂ film on a cold copper plate, ice crystals could grow from bottom of film. Removing such ice crystals then led to ordered, micro-sized pores in the films. With assistance of scanning electron microscopy and N₂ adsorption–desorption isotherms, micro-structural properties of the films were studied. Coarsening behavior of ice crystals was analyzed based on evolvement of the micro-structure. It was found that, both larger film thickness and longer freezing time were beneficial for the formation of ordered porous structure, which was caused by enhanced ice crystals growth. The films were then used to fabricate photoanode of dye sensitized solar cells, of which the photo-to-electric power conversion efficiency was evaluated. It was observed that, solar cell made of ordered porous TiO₂ film came out with 13% larger photo-current density comparing to that made of conventional doctor blading method, which is due to the enhanced light scattering by the ordered porous structure.     

Solution processed Al-doped ZnO and its performance in dye sensitized solar cells

Al-doped ZnO rods of nanometer to sub-micrometer size range have been successfully synthesized by a simple yet cost-effective solution processed sonochemical technique. Systematic XRD analysis established the solid solubility limit for Al in the ZnO lattice to be ca. 3 mol% at an elevated annealing temperature of 800 °C. The secondary ZnAl₂O₄ phase appears with increasing dopant concentrations and at lower annealing temperatures. Significant variations in the optoelectronic properties are induced by modifications in the surface defects of ZnO rods as a result of Al doping. As a consequence, an improved fill factor (FF) of 74.78 and 75.76% with a conversion efficiency (η) of 1.59 and 1.79% have been achieved for the fabricated DSSC devices made of the 800 °C annealed ZnO rods doped by 1 and 3 mol% Al, respectively.     

Effect of surface morphology on screen printed solar cells

Surface texturing is well known as one of the major paths to improving the efficiency of silicon solar cells by increasing the short circuit current through effective photon trapping. However, the effects of the pyramids created after surface texturing on the other properties remain obscure. In this work, we studied the effect of the surface morphologies on the formation of both the emitter layer and metal electrode using the screen printing method, which is a cost-effective method of fabricating silicon solar cells. Various textured surfaces, such as with large, small, sharp or smooth pyramids, were investigated in comparison with a flat surface. The contact resistance was measured from a TLM patterned cell by I–V measurement under dark conditions and SEM, TEM and UV–vis spectrophotometer were used to evaluate the surfaces.     

Adhesion comparison of human bone marrow stem cells on a gradient wettable surface prepared by corona treatment

Corona discharge treatment was applied to modify the surface of polyethylene (PE). The wettability of PE surface was gradually increased by power increase of a corona treatment along the PE length, indicating that the hydrophilicity of PE surface increased gradually. The adhesion and proliferation behavior of human bone marrow stem cells (hBMSCs) on the gradient PE surface was evaluated. We found that hBMSCs were adhered to and proliferated on better highly hydrophilic than hydrophobic surfaces. The plot of proliferation rate vs. the water contact angles was parabolic. These results indicate that surface wettability plays an important role in the cell attachment and proliferation.     

Hydrodynamic and chemical scaling for blow-off dynamics of lean premixed flames stabilized on a meso-scale bluff-body

Direct numerical simulations were conducted to investigate the effect of two parameters, density ratio and laminar flame speed, on the conditions of the onset of local extinction and blow-off of lean premixed flames, stabilized on a meso-scale bluff-body in hydrogen-air and syngas–air mixtures. A total of six simulation cases were considered as isolated comparison of the two parametric effects of the fluid dynamic instability and flame time scale. For all cases under study, the general flame development towards the blow-off limit showed a sequence of five distinct modes, with possible cyclic patterns among the different modes for a range of velocity conditions. The onset of local extinction was observed during the asymmetric vortex shedding and vortex street mode. As the density ratio is decreased, the flow inunder reviewstability is promoted through the increased sinuous mode, and such behavior was properly scaled by the Strouhal number. Although the blow-off velocity is altered by the fluid dynamic effects, the condition for the onset of local extinction and blow-off was mainly dictated by the competition between flow residence time associated with the lateral flame motion and ignition delay of the local mixtures. Time scale analysis supported the validity of the findings across all the cases investigated.     

层层自组装金纳米粒子表面等离子体引发光电流应用于等离子体增感太阳能电池

等离子体增感太阳能电池中,层层自组装金纳米粒子的表面等离子体共振能产生光电电流,金纳米粒子层的光电转换效率随表面等离子体共振强度的提升而增加。等离子体增感太阳能电池初步试验光电转换效能为0.75%。利用模型仿真电荷分离的现象、光电电流的产生,以及表面等离子体共振和光电电流产生之间的关系来解释实验结果。在未来,通过优化等离子体增感太阳能电池组件,可以进一步提升其转换效率。这在表面等离子体激活太阳能电池及等离子体太阳能电池领域将有很大应用潜力。     

Optical properties and dynamic process in metal ions doped on CdSe quantum dots sensitized solar cells

In recent years, the nanostructure for solar cells have attracted considerable attention from scientists as a result of a promising candidate for low cost devices. In this work, quantum dots sensitized solar cells with effective performance based on a co-sensitized Cd S∕Cd Se:Mn~(2+)(or Cu~(2+)) nanocrystal, which was made by successive ionic layer absorption and reaction, are discussed. The optical, physical, chemical, and photovoltaic properties of quantum dots sensitized solar cells were sensitized to Mn~(2+)and Cu~(2+)dopants. Therefore, the short current(JSC)of the quantum dot sensitized solar cells is boosted dramatically from 12.351 mA∕cm~2 for pure Cd Se nanoparticles to 18.990 mA∕cm~2 for Mn~(2+)ions and 19.915 mA∕cm~2 for Cu~(2+)ions. Actually, metal dopant extended the band gap of pure Cd Se nanoparticles, reduced recombination, enhanced the efficiency of devices, and improved the charge transfer and collection. In addition, Mn~(2+)and Cu~(2+)dopants rose to the level of the conduction band of pure Cd Se nanoparticles, which leads to the reduction of the charge recombination, enhances the lightharvesting efficiency, and improves the charge diffusion and collection. The results also were confirmed by the obtained experimental data of photoluminescence decay and electrochemical impedance spectroscopy.     

Improvement of organic solar cells by flexible substrate and ITO surface treatments

In this paper, surface treatments on polyethylene terephthalate with polymeric hard coating (PET-HC) substrates are described. The effect of the contact angle on the treatment is first investigated. It has been observed that detergent is quite effective in removing organic contamination on the flexible PET-HC substrates. Next, using a DC-reactive magnetron sputter, indium tin oxide (ITO) thin films of 90 nm are grown on a substrate treated by detergent. Then, various ITO surface treatments are made for improving the performance of the finally developed organic solar cells with structure Al/P3HT:PCBM/PEDOT:PSS/ITO/PET. It is found that the parameters of the ITO including resistivity, carrier concentration, transmittance, surface morphology, and work function depended on the surface treatments and significantly influence the solar cell performance. With the optimal conditions for detergent treatment on flexible PET substrates, the ITO film with a resistivity of 5.6 × 10⁻⁴ Ω cm and average optical transmittance of 84.1% in the visible region are obtained. The optimal ITO surface treated by detergent for 5 min and then by UV ozone for 20 min exhibits the best WF value of 5.22 eV. This improves about 8.30% in the WF compared with that of the untreated ITO film. In the case of optimal treatment with the organic photovoltaic device, meanwhile, 36.6% enhancement in short circuit current density (J_sc) and 92.7% enhancement in conversion efficiency (η) over the untreated solar cell are obtained.     

Characterization of CBO and defect states of CZTSe solar cells prepared by using two-step process

We fabricated kesterite Cu₂ZnSnSe₄ (CZTSe) solar cells and studied device characteristics, where CZTSe absorbers were made by using two-step process. First, we deposited precursor CZTSe films with spin-coating or sputtering, and performed sulfurization and subsequent selenization. To complete the device, we applied In₂S₃ as a buffer layer. We obtained power conversion efficiency (PCE) of 4.18% with spin-coated CZTSe absorber and 5.60% with sputtered CZTSe absorber. Both devices showed deep defects in the bulk and strong interface recombinations near the pn junction. In addition, we observed red-kinks in the current density-voltage (J-V) curves for both devices under the filtered light illumination (>660 nm), which is attributed to large conduction band offset (CBO) between the CZTSe absorber and the buffer layer and defect states in the buffer/CZTSe absorber or in the buffer. The red-kink was also observed in CZTSe (PCE of 7.76%) solar cell with CdS buffer. Hence, to enhance the PCE with CZTSe absorber, along with suppression of deep defects which act as recombination center, optimization of CBO between absorber and buffer is also required.     

高压射频等离子体增强化学气相沉积制备高效率硅薄膜电池的若干关键问题研究

报道了采用高压射频等离子体增强化学气相沉积(RF-PECVD) 制备高效率单结微晶硅电池和非晶硅/微晶硅叠层电池时几个关键问题的研究结果, 主要包括: 1)器件质量级本征微晶硅材料工艺窗口的确定及其结构和光电性能表征; 2)孵化层的形成机理以及减小孵化层的有效方法; 3)氢稀释调制技术对本征层晶化率分布及其对提高电池性能的作用; 4)高电导、高晶化率的微晶硅p型窗口层材料的获得, 及其对减小微晶硅电池p/i界面孵化层厚度和提高电池性能的作用等. 在解决上述问题的基础上, 采用高压RF-PECVD制备的单结微晶硅电池效率达8.16%, 非晶硅/微晶硅叠层电池效率11.61%.