The sorption properties of polymers with molecular imprints of chlorine-containing pesticides

Polymers with molecular imprints of 2,4-dichlorophenoxyacetic acid (2,4-D), 3,6-dichloro-2-methoxybenzoic acid (dicamba), and (RS)-1-p-chlorophenyl-4,4-dimethyl-3-(1H-1,2,4-triazol-1-ylmethyl) pentan-3-ol and the corresponding blank polymers were synthesized using acrylamide as a functional monomer. The specific surface area of the resulting materials was estimated and their sorption properties were studied. It was found that the sorption characteristics of the polymers with molecular imprints of chlorine-containing pesticides depended on the nature of template molecules, functional monomer: template ratio in the polymerization mixture, and nature and content of solvents varied at the synthesis stage. According to the sorption isotherms, the difference in the sorption behavior of molecularly imprinted and blank polymers was observed over a wide range of chlorine-containing pesticide concentrations. The selectivity of the adsorbent with 2,4-D imprints was estimated for the example of structurally related compounds.     

Synthesis and study of sorption properties of molecularly imprinted polymers for quercetin

Molecularly imprinted polymers for quercetin and the corresponding nonimprinted blank polymers (control polymers) have been synthesized using acrylamide and 2-(dimethylamino)-ethylmethacrylate as functional monomers. It has been shown that the nature of the template, the ratio of the functional monomer to template within the prepolymerization mixture, and the amount of crosslinker, which were varied at the synthesis stage, influenced on the sorption properties of molecularly imprinted polymers for quercetin. Synthesis conditions were optimized by varying the composition of the prepolymerization mixture. The sorption properties of the obtained materials have been studied. The estimation of selectivity of a sorbent with the imprints of quercetin was carried out by the example of structurally related compounds. It has been shown that the acrylamide-based polymer was able to selectively sorb quercetin, the binding sites of the quercetin being mainly of hydrophobic structure.     

Smart,self-repair polymers based on acryloyl-6-aminocaproic acid and modified with magnetic nanoparticles—preparation and characterization

Capability of materials to self-repair is an innovative and unique property from a point of view both chemistry and physics. Moreover, such property could arouse special interests if such an ability could be caused by the selection of the environmental parameters. Such materials—polymers based on acryloyl-6-aminocaproic acid (A6ACA)—were synthesized in the present paper. In addition, mentioned polymers have been modified with different amount of magnetic nanoparticles solution. Subsequently, sorption capacity and behavior of synthesized polymers in simulated body fluids have been determined. What is also important, studies on cytotoxicity of prepared materials in relation to fibroblasts and cells of cancer origin have been conducted. Materials have also been analyzed by Fourier transform infrared spectroscopy and scanning electron microscopy method. Based on the research aiming at physicochemical characteristics of abovementioned materials it was proved that prepared hydrogels showed self-repair property in a low pH environment. Apart from this essential issue, these were characterized by high sorption capacity, high porosity which decreases with the introduced amount of nanoparticles and, what is important, cytotoxicity to cancer cells. Such combination is a very interesting from a point of view of many realms and due to its unique features may be widely applicable in the nearest future.     

Rational materials design of sorbent coatings for explosives: applications with chemical sensors

A series of chemoselective polymers had been designed and synthesized to enhance the sorption properties of polymer coated chemical sensors for polynitroaromatic analytes. To evaluate the effectiveness of the chemoselective coatings, a polynitroaromatic vapor test bed was utilized to challenge polymer coated surface acoustic wave (SAW) devices with different explosive vapors. Dinitrotoluene detection limits were determined to be in the <100 parts per trillion ranges. ATR-FTIR studies were used to determine the nature of the polymer-polynitroaromatic analyte interactions, and confirm the presence of hydrogen-bonding between polymer pendant groups and the nitro functional groups of polynitroaromatic explosive materials.     

Preparation and application of molecularly imprinted polymer for isolation of chicoric acid from Chicorium intybus L. medicinal plant

Molecularly imprinted polymer (MIP) was synthesized and applied for the extraction of chicoric acid from Chicory herb (Chicorium intybus L.). A computational study was developed to find a suitable template to functional monomer molar ratio for MIP preparations. The molar ratio was chosen based on the comparison of the binding energy of the complexes between the template and functional monomers. Based on the computational results, eight different polymers were prepared using chicoric acid as the template. The MIPs were synthesized in a non-covalent approach via thermal free-radical polymerization, using two different polymerization methods, bulk and suspension. Batch rebinding experiments were performed to evaluate the binding properties of the imprinted polymers. The best results were obtained with a MIP prepared using bulk polymerization with 4-vinylpyridine (4-VP) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the crosslinker with a molar ratio of 1:4:20. The best MIP showed selective binding ability toward chicoric acid in the presence of the template’s structural analogues, caffeic acid, caftaric acid and chlorogenic acid.     

Isolation of sinapic acid from broccoli using molecularly imprinted polymers

A molecularly imprinted polymer was synthesized for the purpose of sinapic acid isolation from Egyptian nutraceutical Botrytis italica, L. (broccoli) due to its prominent medicinal and wide pharmacological activities. A computational study was first developed to determine the optimal template to functional monomer molar ratio. Based on the computational results, five polymers were synthesized using a bulk polymerization method with sinapic acid as the template molecule. Evaluation of the synthesized polymers binding performance was carried out using batch rebinding assay, which revealed that the molecularly imprinted polymer of molar ratio (1:4:20), template to functional monomer (4‐vinyl pyridine) to crosslinker (ethylene glycol dimethacrylate) was of optimum performance, thus, this polymer was applied for sinapic acid isolation from closely related analogues. This represents a more practical approach to isolate sinapic acid from different natural extracts selectively.     

Selecting the nature of imprinted molecular organosilica sieves with gallic acid via thermal analyses

The stability of the organosilica–gallic acid (GA) complex, and thus the strength of initial interactions which influences directly the sorption parameters of imprinted materials, is mostly given by the nature of co-monomers. Therefore, combining tetraethoxysilane, tetrametoxysilane, vinyl triethoxysilane and vinyl benzyl triethoxysilane as functional monomers, six formulations were obtained in order to optimise the nature of imprinted sieves. Vinyl benzyl trimethylammonium chloride and tertamethyl ammonium hydroxide directed the mesophase formation. Morphology and thermal properties of imprinted organosilica sieves were evaluated and compared to those of blank polymers synthesised in the same conditions as the imprinted ones but without GA. Thermal analysis results corroborated with the morphology of imprinted sieves were confirmed by specific GA sorption tests.     

A study of a bio-mimetic recognition material for the BAW sensor by molecular imprinting and its application for the determination of paracetamol in the human serum and urine

A new bio-mimetic bulk acoustic wave (BAW) sensor for paracetamol, with a high selectivity and sensitivity, was fabricated by using the molecularly imprinted polymer (MIP) as the sensing material. Non-covalent molecular imprinting polymers were synthesized simultaneously using two different functional monomers, namely the weakly basic 4-vinylpyridine (4-VP) and the acidic and hydrogen binding methacrylic acid (MAA). Such imprinted polymers improved recognition capability as compared with the polymers that were synthesized using only one of the functional monomers. Dynamic quartz crystal impedance analysis was employed to study the effect of the viscoelasticity of the polymer coating on the measurement. There was no variation in the viscoelasticity during the detection. The sensor was stable and exhibited good reproducibility. Satisfactory results were obtained in the determination of paracetamol in real samples.     

含L-氨基酸基团的手性功能单体及与N-异丙基丙烯酰胺共聚物的合成

以L-苯丙氨酸（L-Phe）、L-色氨酸（L-Trp）和L-亮氨酸（L-Leu）3种常见的氨基酸为手性源,经过酯化、缩合等步骤制备3种手性功能单体AAc-L-Phe(AAc:丙烯酸)、AAc-L-Trp和AAc-L-Leu,其结构经过IR、1H NMR确证。 并将手性单体AAc-L-Phe与温敏材料N-异丙基丙烯酰胺(NIPAam)共聚,制备了手性共聚物P(NIPAam-co-AAc-L-Phe),结构经IR确证,示差扫描量热分析测试证明其具有温敏性。 这些手性功能单体有可能用于制备环境响应性手性高分子聚合物。     

Dimethacrylate derivatives of dimer acid

Dimethacrylate monomers are used in a wide variety of crosslinked polymer applications, including adhesives, coatings, dental restoratives, and stereolithography. The advantages of rapid curing and good mechanical properties offered by these materials are countered by problems with dimensional changes during polymerization and long‐term physical instability resulting from water sorption and loss of residual unreacted monomer. In this work, several examples of hydrophobic monomers based on a dimer acid structure were synthesized, and their monomeric and homopolymer properties were evaluated. The photopolymerization reactivity and conversion were investigated with near‐infrared spectroscopy. Studies of the volumetric shrinkage, water sorption, and water contact angle and three‐point‐bend testing of the homopolymers were also carried out, with the results compared with those of commonly used dimethacrylate monomers. The new monomers produced higher degrees of conversion combined with lower polymerization shrinkage and water sorption values in comparison with conventional monomers. The relatively low crosslink density of dimethacrylates constructed from dimer acid produced polymers with high flexibility and low modulus, as expected; however, changes in the functionality of the group linking the dimer acid core with the methacrylate end groups induced significant property differences. On the basis of the properties demonstrated by the dimer acid monomers and their homopolymers, these new materials appear well suited for applications such as coatings and adhesives. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3921–3929, 2006     

Molecularly imprinted adsorbents for positional isomer separation.

2,4-Dihydroxybenzophenone (2,4-DHB) imprinted polymers were synthesized by surface imprinting technique, using allyl alcohol as the functional monomer. The polymers showed a very high selectivity for 2,4-DHB when compared with various positional isomers such as 2-HB, 2,2'-DHB, 4,4'-DHIB and 4,4'-DMB. Solvents were found to affect the selectivity as well as sorption capacity in the case of surface imprinted polymers. The selectivities decreased drastically when the imprint cavity was blocked. This validated the importance of the cavity and the rebinding interactions in governing the selectivity in the case of MIPs. The surface imprinted polymers also showed a high selectivity under non-equilibrium conditions thereby making them suitable adsorbents for industrial separations.     

Polyacrolein-isonicotinic acid hydrazone and polyacrylic acid-thiohydrazide resins-synthesis and sorption properties for precious and base metals

This investigation carries on previous studies on polyacrolein-styrene resins. Further attempts were made to convert the reactive aldehyde groups of the polymeric support to functional acrolein-isonicotinic acid hydrazone (P-NHZ) or acrylic acid-thiohydrazide derivatives (P-THZD). The conditions of synthesis and the basic sorption and desorption properties of the polymers synthesized are described. For gold and platinum group metals the resins show differences in loading capacities, rates of simultaneous sorption in static conditions and efficiencies in column tests. The elution by thiourea solution was utilized to separate Au, Pd and Pt from an excess of base metals. The P-NHZ resin seems to be more advantageous than the sulfur containing P-THZD resin.     

功能性高分子聚(羟丙基、丙基)-DL-天冬酰胺的合成、表征及性能的研究

通过改变氨基丙醇和丙胺的投料比，合成了一系列不同侧链的DL-天冬酰胺高分子材料，并改变了材料的亲脂亲水性能。用核磁共振，红外光谱，差热分析，凝胶色谱及吸水性等对高分子材料进行了表征。将模型药物乙酰水杨酸接入系列材料后进行了体外模拟释药性实验，结果表明，脂溶性增加的材料载药后，释药速率明显提高。     

Synthesis of caffeic acid and p-hydroxybenzoic acid molecularly imprinted polymers and their application for the selective extraction of polyphenols from olive mill waste waters

Using caffeic acid and p-hydroxybenzoic acid as templates, two molecularly imprinted polymers (MIPs) were prepared that were used for isolation of polyphenols from olive mill waste water samples (OMWWs) without previous pre-treatment. For the preparation of the caffeic acid MIPs 4-vinylpyridine, allylurea, allylaniline and methacrylic acid were tested as functional monomers, ethylene glycol dimethylacrylate (EDMA), pentaerythritol trimethylacrylate (PETRA) and divinylbenzene 80 (DVB80) as cross-linkers and tetrahydrofuran as porogen. For p-hydroxybenzoic acid 4-vinylpyridine, allylurea and allylaniline were tested as functional monomers, EDMA and PETRA as cross-linkers and acetonitrile as porogen. The performance of the synthesized polymers was evaluated against seven structurally related compounds by means of polymer-based HPLC. The two polymers that presented the most interesting properties were further evaluated by batch rebinding and from the derived isotherms their capacity and binding strength were determined. Using solid-phase extraction (SPE), their ability to recognize and bind the template molecule from an aqueous solution as well as the pH dependence of the binding strength were explored. After establishing the best SPE protocol, an aqueous model mixture of compounds and a raw OMWWs sample were loaded on the two best polymers. The result of the consecutive use of the two polymers on the same sample was explored. It was concluded that acidic conditions favour the recognition abilities of both polymers and that they can be used for a quick and efficient isolation of the polyphenol fraction directly from raw OMWW.     

Synthesis of a molecularly imprinted polymer for the selective recognition of carmoisine (Azorubin E122) from pomegranate juice

Since natural pigments are lost during the processing of beverages such as pomegranate juice, carmoisine, as an adulterant, is often added into the pure juice to improve color characteristics. In this study, molecularly imprinted polymers, as an adsorbent of carmoisine, were synthesized using acrylamide, methacrylic acid, and 4‐vinylpyridine as functional monomers and then they were evaluated in terms of the separation and detection of carmoisine. Experiments on the batch adsorption of carmoisine 10 ppm stock solution revealed a better binding capacity for the 4‐vinylpyridine‐based polymer in comparison to methacrylic acid and acrylamide polymers. The complexation of carmoisine with the 4‐vinylpyridine‐based polymer was confirmed by Fourier transform infrared spectroscopy. The synthesized polymer exerted a high thermal degradation point and average diameter of polymer particles were obtained to be 0.2 μm by dynamic light scattering analysis. This work showed that detection of pomegranate juice adulteration with carmoisine is not necessarily difficult, time consuming or expensive with selective separation techniques such as molecularly imprinted polymers.     

Preparation and Characterization of Aromatic Polybenzoxazoles Copolymers Containing 2,6-Naphthalene Units

A series of polybenzoxazoles(co)polymers bearing crankshaft units in the main chain was synthesized by the conventional solution polycondensation of 4,6-diaminorescinol dihydrochloride, terephthalic acid (TA) and 2,6-naphthalene dicarboxylic acid(NDA). All of the polymers show lyotropic liquid crystal behavior in polyphosphoric acid (PPA) and methanesulfonic acid (MSA). The polybenzoxazoles exhibit an excellent thermal resistance although the crankshaft monomer has been introduced into the polymer backbone. The temperature for the 5% weight loss of all the polymers is above 600 ℃. The X-ray diffraction analysis results show that the series of the polymers has a high crystallinity. The introduction of NDA makes a slight decrease in the thermal resistance of the polymers. The maximum absorption peak in the UV-Vis spectra can be adjusted according to the amount of 2,6-naphthalene units in the polymers, which indicates the potential application of the polymers as optoelectrie materials.     

聚酯酸酐的合成与表征

聚酸酐具有优良的表面溶蚀性能，作为药物控释体系材料得到广泛的应用．以对（２ 羟基 乙氧基）苯甲酸和对（２ 甲基 ２羟基 乙氧基）苯甲酸分别与丁二酸酐，顺丁烯二酸酐和丁二酰氯反应得到六个含有酯基的新型二元酸单体，经熔融聚合得到聚酯酸酐．单体和聚合物经ＩＲ，１Ｈ ＮＭＲ和元素分析等表征．研究了催化剂对聚合物结构的影响．     

Bisphenol A analog-imprinted polymers prepared by an immobilized template on a modified silica microsphere matrix.

Bisphenol A (BPA)-recognizing imprinted polymers were synthesized using a template immobilized on silica where the template was grafted to aminopropyl silica. The silica-template conjugate was co-polymerized with a cross-linker (ethylene glycol dimethacrylate) and a functional monomer (4-vinylpyridine or methacrylic acid). The synthesized silica-polymer composites were treated with an aqueous NH4HF2 solution to dissolve the silica matrix. The 4-vinylpyridine-based imprinted polymer showed strong binding affinity to BPA and structurally related compounds having two hydroxyl groups at the 4,4'-position in the bisphenol structure.     

The sorption properties of polymers with molecular imprints of 2,4-dichlorophenoxyacetic acid synthesized by various methods

New sorbents, polymers with molecular imprints of 2,4-dichlorophenoxyacetic acid (2,4-D), were prepared on the basis of acrylamide. The sorbents were synthesized by thermal polymerization methods with and without the use of ultrasound, photopolymerization, and suspension polymerization. The specific surface area of the products was estimated and their sorption properties were studied. Polymers with molecular imprints prepared by thermal polymerization with the use of ultrasound and by suspension polymerization showed the best ability to repeatedly bind 2,4-D. The selectivity of polymers was estimated for the example of structurally related compounds. It was shown that the method of synthesis decisively influenced not only the ability of sorbents to repeatedly bind 2,4-D but also their selectivity.     

Selective separation and enrichment of glibenclamide in health foods using surface molecularly imprinted polymers prepared via dendritic grafting of magnetic nanoparticles

In this paper, the novel surface molecularly imprinted polymers based on dendritic‐grafting magnetic nanoparticles were developed to enrich and separate glibenclamide in health foods. The density functional theory method was used to give theoretical directions to the synthesis of molecularly imprinted polymers. The polymers were prepared by using magnetic nanoparticles as supporting materials, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross‐linker. The characteristics of magnetic nanoparticles and polymers were measured by transmission electron microscope and SEM, respectively. The enriching ability of molecularly imprinted polymers was measured by Freundlich Isotherm. The molecularly imprinted polymers were used as dispersive SPE materials to enrich, separate, and detect glibenclamide in health foods by HPLC. The average recoveries of glibenclamide in spiked health foods were 81.46–93.53% with the RSD < 4.07%.