微波辐射下甲基丙烯酸正丁酯原子转移自由基聚合

原子转移自由基聚合(Atom transfer radical polymerization,ATRP)与其他活性聚合方法相比,具有适用单体广、反应条件温和。但其催化体系活性不高,聚合温度较高,数均分子量不高。     

Synthesis of optical-active azo-containing acrylates using atom transfer radical polymerization under microwave irradiation

Microwave irradiation (MI) was applied to the atom transfer radical polymerization (ATRP) of azo-containing acrylates. The polymerization was greatly promoted and the reaction time was shortened from several days to about 1 h. The polymerization was well-controlled within an incipient period but it was influenced by “hyperthermia effect” after a certain time. The functional polymers obtained under MI process have good third-order nonlinear optical (NLO) properties as those of polymers obtained under CH process.     

A versatile synthesis of poly(lauryl acrylate) using N-(n-octyl)-2-pyridylmethanimine in copper mediated living radical polymerization

A facile synthesis of poly(lauryl acrylate) has been achieved by atom transfer radical polymerization using benzyl-2-bromoisobutyrate, copper (I) bromide, and N-(n-octyl)-2-pyridylmethanimine (OPMI). The latter was of great interest as its synthesis was very easy to carry out and as it allowed the reaction mixture to be homogeneous, which was essential for the control of the reaction. The polymerization was controlled under these conditions and was optimized with the addition of copper (II) bromide as deactivator. We proved that the synthesis of poly(lauryl acrylates) with well defined molecular weights and narrow polydispersities was possible using a ligand which does not require difficult synthesis and purification. We also showed the ability of pyridylmethanimine ligands to control ATRP of an acrylate derivative. Best results were obtained at 130 °C in xylene for [Initiator]₀/[Cu(I)Br]₀/[Cu(II)Br₂]₀/[OPMI]/[lauryl acrylate] equal to 1/1/0.05/2.2/181, respectively (M_n = 19,942, DPI = 1.28).     

Atom transfer radical polymerization of styrene under pulsed microwave irradiation

A homogeneous solution atom transfer radical polymerization (ATRP) and reverse atom transfer radical polymerization (RATRP) of styrene (St) in N,N-dimethylformamide (DMF) were successfully carried out under pulsed microwave irradiation (PMI), using 1-bromo-1-phenylethane (1-PEBr)/CuCl/N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as an initiating system at 85°C and 2,2′-azo-bis-isobutyrontrile (AIBN)/CuCl₂/PMDETA as an initiating system at 95°C, respectively. The polymerization rates under PMI were greatly increased in comparison with those under identical conventional heating (CH).     

Stable free radical polymerization of n-butyl acrylate in the presence of high-temperature initiators

Living radical polymerizations of acrylate are known to be difficult to achieve using TEMPO as a mediator. The stable free radical polymerization (SFRP) of acrylate tends to stop at low monomer conversion due to the accumulation of TEMPO in the medium as a result of unavoidable bimolecular termination. Rather than solving this problem by destroying the excess nitroxide using ascorbic acid or glyceraldehyde associated with pyridine as reported recently, high temperature initiators were used to slowly and continuously generate new radicals throughout the polymerization to consume the excess TEMPO molecules. Polymerizations of n-butyl acrylate initiated by the alkoxyamine unimer (1-benzoyloxy)-2-phenyl-2-(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)ethane (BST) were performed between 130 °C and 134 °C in the presence of a series of high temperature peroxide and azo initiators. The best results in this study were obtained by the continuous addition of small amounts of di-tert-amyl peroxide throughout the polymerization. Under these conditions, the acrylate polymerizations fulfilled the criteria of a controlled polymerization process although the molecular weight distributions were slightly broad (M_w/M_n ∼ 1.5).     

Preparation and characterization of fluorinated acrylate copolymer latexes by miniemulsion polymerization under microwave irradiation

Fluoroacrylate copolymer miniemulsion was prepared by miniemulsion polymerization under microwave irradiation. The composition of the copolymer was determined by FTIR, DSC, ¹H NMR and ¹⁹F NMR. The morphology, size, and size distribution of the latex particles as well as changes in the size during polymerization were characterized by TEM and photon correlation spectroscopy (PCS). The effects of kinetic parameters on the polymerization were evaluated. The particle size of latex underwent almost no change during microwave irradiation polymerization. The diameters of latex particles prepared by microwave irradiation were smaller and more monodispersed than those prepared by conventional heating and the latex had good centrifugal stability. Polymerization under microwave irradiation had a higher reaction rate and higher conversion than traditional heating. By using 10 wt% fluoromonomer, the surface energy of the latex film could be reduced from 27.24 mJ/m² (latex film of fluorine-free) to 17.59 mJ/m² and the decomposition temperature increased by 25 °C.     

Towards more controlled poly(n-butyl methacrylate) by atom transfer radical polymerization

The homogeneous controlled/‘living’ free radical polymerization of n-butyl methacrylate in toluene or o-xylene at 90 °C, in bulk and in solution, using the novel combination of the catalyst bis-triphenylphosphine iron(II)chloride tetrahydrate (FeCl₂ · 4H₂O(PPh₃)₂) with ethyl 2-bromoisobutyrate ((CH₃)₂CBrCO₂Et)) and α,α-dichloroacetophenone (CHCl₂COPh) as initiators has been investigated. The rate of polymerization initiated by the two initiators exhibited first-order kinetic with respect to the monomer. A linear increase of the number-average molecular weight (M_n) versus monomer conversion was observed for these systems. Among the two initiation systems, ethyl 2-bromoisobutyrate gave the fastest polymerization rate. A system with Fe³⁺ added at the beginning of the polymerization was examined and the lowest polydispersity (M_w/M_n∼1.2) was found when 10% Fe³⁺, relative to Fe²⁺ was added.     

Synthesis of tertiary-butyl acrylate polymers and preparation of diblock copolymers using atom transfer radical polymerization

The synthesis of tert-butyl acrylate by atom transfer radical polymerization (ATRP) is reported. This polymer was prepared using FeCl₂ · 4H₂O(PPh₃)₂ catalyst system in conjunction with methyl 2-bromopropionate as initiator, in bulk and in solution using acetone as a solvent. The addition of solvent was necessary in order to decrease the polymerization rate and to afford low polydispersity polymers. The number-average molecular weights of the resulting polymers increased in direct proportion to the monomer conversion, and the polydispersities (M_w/M_n) were as low as 1.2. In addition, the preparation of an AB diblock copolymer of poly (n-butyl methacrylate)-block-poly (tert-butyl acrylate) by ATRP is reported. The resulting polymers and copolymers were characterized by means of size exclusion chromatography and ¹H-NMR Spectroscopy.     

Monodispersed PEG‐b‐PSt nanoparticles prepared by atom transfer radical emulsion polymerization under microwave irradiation

Atom transfer radical emulsion polymerization of styrene using PEG‐Cl as macroinitiator under microwave irradiation was successfully conducted and monodispersed nanoparticles were prepared. The PEG‐Cl macroinitiator was synthesized, and confirmed by FTIR spectrum. The structure of the PEG‐b‐PSt diblock copolymer was characterized by ¹H‐NMR and the number of styrene unit in the diblock copolymer was calculated. The morphology, size, and size distribution of the nanoparticles were characterized by transmission electron microscope (TEM) and photon correlation spectroscopy (PCS). The effects of the ratio of macroinitiator and monomer, the ratio of catalyst and macroinitiator on the size and size distribution of nanoparticles were investigated. It was found that the diameters of PEG‐b‐PSt nanoparticles prepared under microwave irradiation were smaller (<50 nm) and more monodispersed than those prepared with conventional heating. Moreover, with the increasing of the ratio of St/PEG‐Cl, the hydrodynamic diameters (D_h) of the nanoparticles increased and the poly index decreased, both D_h and poly index of the nanoparticles prepared under microwave irradiation were smaller then those prepared with conventional heating; as the concentration of catalyst increased, the D_h of the nanoparticles decreased and the poly index of the nanoparticles increased. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 481–488, 2008     

Reverse atom transfer radical solution polymerization of methyl methacrylate under pulsed microwave irradiation

The reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) was successfully carried out under pulsed microwave irradiation (PMI) at 69 °C with N,N‐dimethylformamide as a solvent and with azobisisobutyronitrile (AIBN)/CuBr₂/tetramethylethylenediamine as an initiation system. PMI resulted in a significant increase in the polymerization rate of RATRP. A 10.5% conversion for a polymer with a number‐average molecular weight of 34,500 and a polydispersity index of 1.23 was obtained under PMI with a mean power of 4.5 W in only 52 min, but 103 min was needed under a conventional heating process (CH) to reach a 8.3% conversion under identical conditions. At different [MMA]₀/[AIBN]₀ molar ratios, the apparent rate constant of polymerization under PMI was 1.5–2.3 times larger than that under CH. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3823–3834, 2002     

Synthesis of novel crosslinkable polymers by atom transfer radical polymerization of cardanyl acrylate

In this work, the successful application of atom transfer radical polymerization (ATRP) to cardanyl acrylate, a polymerizable monomer derived from a renewable resource cardanol, is reported. Polycardanyl acrylate and poly(methylmethacrylate)‐cardanyl acrylate copolymers were prepared in bulk ATRP, using Copper(I) bromide/N, N, N′, N′, N″‐pentamethyl diethylene triamine (PMDETA) catalyst system at 95 °C in combination with ethyl‐2‐bromo isobutyrate initiator. The copolymers had mol. wt. (M_n) in the range 8300–2400 g/mol and polydispersity index (PDI) 1.27–2.00, depending upon the [M]₀/[I]₀ ratio. ¹H NMR analysis of the copolymer showed that unsaturation in the side chain of cardanyl acrylate is unaffected under the conditions of ATRP. This was further confirmed by studying the curing reaction of polycardanyl acrylate by supported dynamic mechanical thermal analysis (DMTA) in dual cantilever mode. The thermogravimetric analysis shows that the copolymers have improved thermal stability, by about 35 °C, in comparison with pure PMMA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5953–5961, 2005     

Atom transfer radical polymerization of n‐butyl acrylate from silica nanoparticles

This article reports the synthesis of atom transfer radical polymerization (ATRP) of active initiators from well‐defined silica nanoparticles and the use of these ATRP initiators in the grafting of poly(n‐butyl acrylate) from the silica particle surface. ATRP does not require difficult synthetic conditions, and the process can be carried out in standard solvents in which the nanoparticles are suspended. This “grafting from” method ensures the covalent binding of all polymer chains to the nanoparticles because polymerization is initiated from moieties previously bound to the surface. Model reactions were first carried out to account for possible polymerization in diluted conditions as it was required to ensure the suspension stability. The use of n‐butyl acrylate as the monomer permits one to obtain nanocomposites with a hard core and a soft shell where film formation is facilitated. Characterization of the polymer‐grafted silica was done from NMR and Fourier transform infrared spectroscopies, dynamic light scattering, and DSC. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4294–4301, 2001     

Polymerization of acrylates by atom transfer radical polymerization. Homopolymerization of 2-hydroxyethyl acrylate

The application of atom transfer radical polymerization (ATRP) to the homopolymerization of 2-hydroxyethyl acrylate, a functional monomer, is reported. The polymerizations exhibit first-order kinetics, and molecular weights increase linearly with conversion. Polydispersities remain low throughout the polymerization (M_w/M_n ≈ 1.2). Reactions were conducted in bulk and in 1 : 1 (by volume) aqueous solution; the latter demonstrates the resilience of ATRP to protic media. Analysis of poly(2-hydroxyethyl acrylate) by MALDI-MS and ¹H-NMR shows M_n,exp to be much closer to M_n,th than those observed by SEC using polystyrene standards. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1417–1424, 1998     

Rh(I)-catalyzed solvent-free ortho-alkylation of aromatic imines under microwave irradiation

The synthesis of ortho-alkylated ketones through a chelation-assisted Rh (I) catalyzed ortho-alkylation reaction of aromatic imines under microwave activated solvent-free conditions in monomode reactors was performed. These conditions have been also applied to hydroacylation and ortho-alkylation reactions with aldimines.     

Atom transfer radical polymerization of 2-methoxy ethyl acrylate and its block copolymerization with acrylonitrile

2-Methoxy ethyl acrylate (MEA), a functional monomer was homopolymerized using atom transfer radical polymerization (ATRP) technique with methyl 2-bromopropionate (MBP) as initiator and CuBr/N,N,N′,N′,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system; polymerization was conducted in bulk at 60 °C and livingness was established by chain extension reaction. The kinetics as well as molecular weight distribution data indicated towards the controlled nature of polymerization. The initiator efficiency and the effect of initiator concentration on the rate of polymerization were investigated. The polymerization remained well-controlled even at low catalyst concentration of 10% relative to initiator. The influence of different solvents, viz. ethylene carbonate and toluene on the polymerization was investigated. End-group analysis for the determination of high degree of functionality of PMEA was determined with the help of ¹³C{¹H} NMR spectra. Chain extension experiment was conducted with PMEA macroinitiator for ATRP of acrylonitrile (AN) in ethylene carbonate at 70 °C using CuCl/bpy as catalyst system. The composition of individual blocks in PMEA-b-PAN copolymers was determined using ¹H NMR spectra.     

Eco-friendly synthesis of guanidinyltetrazole compounds and 5-substituted 1H-tetrazoles in water under microwave irradiation

We have developed simple, short time, cost effective, purification of products by non-chromatographic methods and environmentally benign protocol for the synthesis of guanidinyltetrazoles and 5-substituted 1H-tetrazoles derivatives via [2,3]cyclo-addition reaction of nitriles and azide derivatives in water under microwave irradiation. All the synthesized products are screened for their in vitro antimicrobial activity. The synthesized compounds were obtained in excellent yield (85–98%).     

Potassium iodide catalysed monoalkylation of anilines under microwave irradiation

A potassium iodide catalysed method for the selective N-monoalkylation anilines with alkylhalides and alkyltosylates under microwave irradiation is described. The corresponding N-alkylanilines are obtained in good yields with only minor quantities of dialkylation by-products.     

Atom transfer radical polymerization of styrene in toluene/water mixtures

The atom transfer radical polymerization (ATRP) of styrene in water/toluene mixtures was studied. A linear dependence of the molecular weight on conversion was observed, but the initiation efficiency decreased when the catalyst concentration increased. The variation of the amount of water in the system affected the control of the ATRP, indicating that the presence of the aqueous phase influenced the concentration of copper halides in the organic phase. The partitioning of copper halides resulted in almost complete migration of Cu^II into the aqueous phase, which assisted with catalyst removal after polymerization. For example, the amount of residual copper in the organic phase determined by inductively coupled plasma was less than 1 ppm when the polymerization mixture was exposed to air for 30 min. The ATRP of styrene in water/toluene mixtures occurred with the preservation of Br at the polymer chain end, as confirmed by successful block copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3153–3160, 2002     

Tailor‐made poly(ethyl acrylate) by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of ethyl acrylate (EA) was carried out using different initiators, CuBr or CuCl as catalyst in combination with different ligands e.g., 2,2′‐bipyridine (bpy) and N,N,N′,N″N″‐pentamethyl diethylenetriamine (PMDETA). Use of PMDETA as ligand resulted in faster polymerization rate (95% conversion in 15 min) than those using bipyridine (～58% conversion in 10.5 h). This is due to the lower reduction potential of copper‐amine than that of copper‐bpy complex, resulting in higher rates of activation of dormant halides. Use of ethylene carbonate as solvent lead to faster polymerization rate and better control in polymerization when compared with p‐xylene as solvent. The reaction temperature had a positive effect on polymerization rate and the optimum reaction temperature was found to be 90 °C. An apparent enthalpy of activation of ～85 kJ/mol was determined for the ATRP of ethyl acrylate, corresponding to an enthalpy of equilibrium of ～64 kJ/mol. By judicious choice of the reaction parameters it was possible to tailor the end group of the final polymer. MALDI‐TOF‐MS analysis and the chain extension experiment of poly(ethyl acrylate) (PEA) prepared using bpy as ligand showed the presence of ? Br as the end group. On the contrary, when PMDETA was used as the ligand, the mass spectra analysis showed hydrogen terminated polymer as the major species towards the end of polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1661–1669, 2007     

Atom transfer radical polymerization of styrene initiated by triphenylmethyl chloride

Triphenylmethyl chloride (TPMCl) was employed for the first time as the initiator of atom transfer radical polymerization (ATRP) of styrene in the presence of CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst and cyclohexanone as solvent. The kinetic plot was first-order with respect to monomer. A linear increase of number average molecular weight (M_n) vs. monomer conversion was observed, and the molecular weight distribution (MWD) was relatively narrow (M_w/M_n = 1.2-1.5). ¹H NMR spectra revealed the ω-Cl group at the chain end. Another two initiators, benzyl chloride (BzCl) and diphenylmethyl chloride (DPMCl), were also employed in contrast with triphenylmethyl chloride to investigate the influence of phenyl numbers on the polymerization.