共查询到20条相似文献,搜索用时 31 毫秒
1.
S. M. Ahmed 《Chemical Papers》2007,61(6):464-471
The incorporation of 9,10-anthraquinone-1,5-disulfonate (AQS2) into the protonated form of poly(o-toluidine) (POT), produced by oxidative polymerization of the cationic form of the monomer or by doping the basic form (POT-EB)
by anion-exchange has been studied by FTIR and UV-VIS spectroscopy and mass spectrometry. The presence of sulfur and the absence
of chlorine proven by elemental analysis of the polymer product confirmed the substitution of the chloride anion with AQS2 in the matrix. Molecular mechanics (MM+) calculations suggest that the optimal geometric structure (OMG) of AQS2-doped POT is at least three (3.92) times more stable than that of the parent chloride-doped POT (HCl-doped POT). The increase
of the absorbance at about 840 nm associated with the increasing concentration of AQS2 revealed the insertion of AQS2 into the POT chain. This observation could be explained by the diffusion of AQS2 in the polymer chain. Kinetic parameters of the oxidative polymerization of the cationic form of o-toluidine (o-T-HClO4) in the presence of different amounts of AQS2 were deduced on the basis of absorbance variations. The results of computer-oriented kinetic analysis indicate that the rate-controlling
step of the o-T polymerization is governed by the Ginstling-Bronstein equation representing the three-dimensional diffusion (D4). Activation
parameters of the oxidative polymerization of protonated o-T in the presence of varying amount of AQS2 were computed and discussed. 相似文献
2.
Milind V Kulkarni 《European Polymer Journal》2004,40(2):379-384
Polyaniline and poly(o-toluidine) doped with p-toluene sulphonic acid (p-TSA) were synthesized by in situ chemical polymerization method using ammonium per sulphate as an oxidizing agent. This is a novel polymerization process for the direct synthesis of emeraldine salt phase of the polymer. The polymers were characterized by using UV-Vis and FT-IR spectroscopy, SEM, elemental analyzer, TGA/DSC and conductivity measurements. Thermal analysis shows that poly(o-toluidine) is less thermally stable compared to polyaniline. The less conductivity in poly(o-toluidine) is due to the cumulative steric as well as electronic effect of the bulky methyl substituent present on the benzene ring. High temperature conductivity measurements show ‘thermal activated behavior’. 相似文献
3.
We report here a novel in situ synthetic method for the preparation of poly(o-toluidine) and copper nanoparticle composite material. In this experiment, o-toluidine and cupric sulfate were used as the precursor; during the reaction o-toluidine was oxidized and forms poly(o-toluidine), while on the other hand cupric sulfate gets reduced and forms copper nanoparticle. IR, UV-vis and Raman spectra provide the information on the structure of the polymer. The TEM and SEM show the size of the nanoparticles and the morphology of the polymer, respectively. 相似文献
4.
Glucose oxidase electrodes of a terpolymer poly(aniline-co-o-anisidine-co-o-toluidine) as biosensors
A simple technique is described for constructing a glucose sensor by the entrapment of glucose oxidase (GOD) in a poly (aniline-co-o-anisidine-co-o-toluidine) [P(A-co-o-A-co-o-T)] thin films, which were electrochemically deposited on a platinum plate in phosphate and acetate buffer. The maximum current response was observed for the said electrodes at pH 5.5 and potential 0.60 V (versus Ag/AgCl). The phosphate buffer gives high stability and fast response as compared to acetate buffer in amperometric measurements. 相似文献
5.
Poly(o-toluidine) (sodium dodecyl sulfate) (POT(SDS)) film was electrosynthesized on carbon paste electrode (CPE) by using the cyclic voltammetry technique in aqueous solution containing o-toluidine (OT), sulfuric acid and SDS. Then, copper oxide was incorporated by immersion of POT(SDS)/CPE in a solution of copper sulfate and using constant potential method. Then, the electrochemical characterization of the modified electrode is presented in alkaline solution. For the first time, electrochemical behaviour of amoxicillin (AMX) at the Cu/POT(SDS)/CPE has been investigated using cyclic voltammetry (CV) and chronoamperometric method. The experimental results suggest that the modified electrode exhibits electrocatalytic effect on the oxidation of AMX resulting in a marked enhancement of the anodic peak current response. Under the selected conditions, the anodic peak current was linearly dependent on the concentration of AMX in the range 80–200 and 5–150 μM with CV and amperometric method, respectively. The detection limits (2δ) were also estimated to be 60 and 3 μM. Some kinetic parameters such as the transfer second-order rate constant (k = 4.9 × 106 cm3 mol–1 s–1) of AMX was calculated. Therefore, this modified electrode was a simple, rapid and new electrode to determine AMX in pharmaceutical preparations. 相似文献
6.
Jayashree Anand S. Palaniappan D. N. Sathyanarayana 《Journal of polymer science. Part A, Polymer chemistry》1998,36(13):2291-2299
Conducting poly(o-toluidine) (POT) and poly(m-toluidine) (PMT) blends containing 10, 30, 50, 70, and 90 % wt/wt of polystyrene (PSt) were prepared by employing a two-step emulsion pathway. The bands characteristic of both polystyrene and POT/PMT are present in the IR spectra of POT–PSt and PMT–PSt blends. The UV-visible spectra of POT–PSt and PMT–PSt blends exhibit two bands around 313 and 610 nm, confirming that some amount of POT/PMT base is present in the blends. The EPR parameters such as line width and spin concentration reveal the presence of POT/PMT salt in the respective blends. The TGA, DTA, and DSC results suggest a higher thermal stability for the POT and PMT blends than that for the respective salts. The conductivity values of POT(70)–PSt(30) and POT(90)–PSt(10) blends are almost the same (1.1 × 10−2 and 1.3 × 10−2 S cm−1, respectively) and these values are very close to that of pure POT salt, suggesting that POT can be blended with up to 30% wt/wt of PSt to improve its mechanical properties without a significant drop in its conductivity. The conductivity values of PMT–PSt blends are lower than those of the corresponding POT–PSt blends by two to three orders of magnitude, indicating that POT is a better system than PMT to prepare blends by this method. The dielectric constant and tan δ values of the blends increase with the amount POT/PMT and are greater than that of polystyrene. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2291–2299, 1998 相似文献
7.
A simple technique is described for constructing a glucose sensor by the entrapment of glucose oxidase (GOD) in a polyaniline (PA), poly(o‐toluidine) (POT) and their copolymer poly(aniline‐co‐o‐toluidine) (PA‐co‐POT) thin films, which were electrochemically deposited on a platinum plate in phosphate and acetate buffer. The maximum current response was observed for PA, POT, and PA‐co‐POT GOD electrodes at pH 5.5 and potential 0.60 V (v. Ag/AgCl). The phosphate buffer gives fast response as compared to acetate buffer in amperometric measurements. PA GOD electrode shows the fastest response followed by PA‐co‐POT and POT GOD electrodes. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
8.
Mohammad Kashif Nazir Ahmad Sharif Ahmad 《Journal of Solid State Electrochemistry》2014,18(7):1855-1867
The corrosion resistance performance of poly (otoluidine) (POT)-dispersed castor oil-polyurethane, (COPU) nanocomposite coatings, POT/COPU, with three different compositions (i.e. 0.25, 0.5 and 1.0 wt%) in alkaline medium is studied. The coatings are applied on mild steel specimens by brushing. Corrosion resistance behaviour of these coatings is investigated using potentiodynamic polarization measurements, electrochemical impedance spectroscopy (EIS) and by weight loss. The morphological behaviour of corroded and uncorroded coated specimens is investigated by scanning electron microscopy (SEM). It is interesting to report that the presence of conducting polymer nanoparticles in POT/COPU coatings suppresses the saponification of COPU in an alkaline environment. These investigations show that the dispersion of POT in COPU remarkably improves the corrosion resistance performance of COPU in alkaline media. POT/COPU (1.0 wt%) coatings have potential as anticorrosive-coating materials in alkaline media at higher pH. These coatings have a higher resistance to alkaline medium in comparison to other compositions. 相似文献
9.
IR spectra of soluble poly-o-toluidine (POT) and poly-m-toluidine (PMT) have been studied. Preliminary assignment of their IR spectra is given by comparing their spectra in HCl and I2, doped states and in subsequently NH3 dedoped state with that in intrinsic state. 相似文献
10.
Premamoy Ghosh Samir K. Siddhanta 《Journal of polymer science. Part A, Polymer chemistry》1999,37(16):3243-3256
Polymerization of o-methylaniline or o-toluidine (OT) was studied in aqueous acidic (HCl) medium with or without the use of the support of a water soluble polymer, polyacrylamide (PAAm). Poly(o- toluidine) (POT) produced with PAAm support was in the form of aqueous solution or dispersion that showed high stability and good processibility. High degree of dispersion or near solubility and storage stability of POT thus prepared are explained on the basis of establishment of hydrogen bonding between segments of POT being formed and the PAAm present in the medium thus resulting in a template effect. Studies by UV-visible spectroscopy and FTIR spectroscopy lend support to this view. POT-PAAm composites commonly show higher thermal stability than POT and the composites show DC-electrical conductivities in the range of 10−9–10−1 S · cm−1 depending on the POT content. Morphological analysis of the optically clear aqueous POT-PAAm solution by transmission electron microscopy (TEM) shows the presence of large clusters of PAAm-supported near-spherical POT nanoparticles in the aqueous PAAm solution. Scanning electron microscopic (SEM) analysis of isolated POT-PAAm composites shows a cocontinuous phase morphology without any trend of gross phase separation. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3243–3256, 1999 相似文献
11.
《高分子科学杂志,A辑:纯化学与应用化学》2013,50(12):1327-1333
Abstract A novel biomimetic method for the synthesis of conducting molecular complexes of polypyrrole (PPYR) and poly(3,4‐ethylenedioxythiophene) (PEDOT) in the presence of a polyelectrolyte, such as polystyrene sulfonate (SPS) is presented. A poly(ethylene glycol) modified hematin (PEG‐Hematin) was used to catalyze the polymerization of pyrrole (PYR) and 3,4‐ethylenedioxythiophene (EDOT) in the presence of SPS to form PPYR/SPS and PEDOT/SPS complexes. UV‐VIS, FT‐IR, and electrical conductivity studies for all complexes indicated the presence of a stable and electrically conductive form of these polymers. Furthermore, the presence of SPS in this complex provides a unique combination of properties such as processability and water‐solubility. 相似文献
12.
Bakhshali Massoumi Fatemeh Ghashangpour Peivasti Mahnaz Saraei Ali Akbar Entezami 《Polymer Science Series B》2011,53(11-12):586-594
Terpolymerization of aniline, o-anisidine and o-toluidine was carried out by electrochemical and interfacial chemical polymerization. All homopolymers and terpolymer thin films have been synthesized through electropolymerization at room temperature in aqueous solutions containing 0.5 M of organic sulfonic acid, such as p-toluene sulfonic acid, methane sulfonic acid, sulfosalicylic acid, dodecylbenzene sulfonic acid, and 0.1 M of aniline, o-anisidine and o-toluidine monomers, using cyclic voltammetry method, applying a sequential linear potential scan at a rate of 25 mV s?1 between ?0.1 and 0.9 V. The electrochemical terpolymerization has been performed at various mole ratios of monomers. Nanoparticles obtained from conjugation of homo- and terpolymer with organic sulfonic acids, were prepared by a chemical oxidation via interfacial chemical polymerization. SEM micrographs, FTIR spectra and conductivity measurements using four-probe method were applied for the characterization of the products. Terpolymer was characterized by higher conductivity than poly-o-toluidine and lesser than polyaniline and poly-o-anisidine. The solubility of terpolymers was dependent on the monomers mole ratio. 相似文献
13.
The enzyme horseradish peroxidase (HRP) was used to polymerize acid‐functionalized anilines to make self‐doped polymer in the presence of a polycationic template. Anionic templates such as sulfonated polystyrene (SPS) could not function as a suitable template for the polymerization of acid‐functionalized aniline derivatives. Several types of polyelectrolytes were used as templates to observe the structural effects and doping behavior of polyaniline/template complexes. The synthesis is straightforward and the conditions are mild in that the polymerization of conducting polyanilines may be carried out in buffered solutions as high as pH 6, with a stoichiometric amount of hydrogen peroxide and catalytic amount of enzyme. The conductivity of these enzymatically synthesized self‐doped polymers was relatively high without additional doping due to the self‐doping of the acid moieties. The conductivity did not decrease dramatically at pH 3 as is the usual case of unsubstituted HCl‐doped polyaniline and maintained good conductivity even at pH 6. The measured conductivity at pH 4~pH 6 is around 10?4 S/cm to 10?6 S/cm. 相似文献
14.
Thermokinetic parameters of the solid-state of poly(o-toluidine) (POT) doped with perchloric (HClO4) acid was studied by thermogravimetric analysis (TG) and differential thermal analysis (DTA) under non-isothermal conditions.
Molecular mechanics (MM) calculations suggest that the optimal geometric structure (OMG) of the HClO4-doped POT is at least four orders of magnitude more stable than the molecular geometric (MG) structure. These calculations
indicate that the potential energy (PE/kJ mol−1) of the OMG is about four (1.09·104) orders of magnitude lower than the MG structure of the same matrix. The empirical formula of the doped polymer is best represented
by [POT-2HClO4·2H2O]n as substantiate by elemental analysis and MM calculations. The full polymer decomposition and degradation were found to occur
in three stages during the temperature increase. The decomposition activation energy (E
d) of HClO4-doped POT matrix was calculated by employing different approximations. The heating rate (α) of the decomposition and the
frequency factor (K
o) were calculated. A number of equations were used to evaluate the kinetic parameters. The mechanism of the degradation of
the conducting polymer is explained on the basis of their kinetic parameters. A remarkable heating rate dependence of the
decomposition rate was observed. 相似文献
15.
Two methods (spectrophotometric and HPLC) have been developed and validated for the analysis of alendronate sodium in tablet dosage form. Both methods depend on the ability of alendronate sodium to react with o-phthalaldehyde (OPA) at basic pH to produce a light-absorbing derivative. The derivative was found to possess absorption maximum at 330 nm where neither the derivatizing agent nor the analyte had any absorption. Thus, spectroscopic method was based on the derivatization-induced absorption of alendronate sodium at 333 nm. The HPLC method was based on separation of the formed derivative from other ingredients in tablets with detection at 333 nm. Both methods were satisfactory with regard to accuracy, prescion and linearity. Moreover, a HPLC method with fluorescence detection (HPLC-FD) was developed for the quantification of alendronate sodium in urine. The method was also based on the derivatization of alendronate with OPA, but fluorescence detection was employed. Linearity, recovery, selectivity, prescision and sensitivity were satisfactory for the proposed HPLC-FD method. Yet a new quantification limit (0.6 ng ml−1) for alendronate in urine was achieved. 相似文献
16.
Manojit Pal 《Tetrahedron letters》2003,44(45):8221-8225
An efficient synthesis of 2-alkyl/aryl substituted benzo[b]furans/nitrobenzo[b]furans in water has been accomplished via Pd/C catalyzed reaction of o-iodophenols with terminal alkynes in the presence of PPh3, CuI and prolinol. This method can tolerate a variety of functional groups present in the alkynes as well as base labile nitro group in the o-iodophenols. The protocol does not require the use of a phase transfer catalyst or water-soluble phosphine ligands and is free from the use of any organic co-solvent. 相似文献
17.
Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
18.
In this paper we present the study of the electrochemical properties of the following conducting polymers: poly(o-anisidine), polyaniline and copolymers of aniline and o-anisidine obtained by a new synthetic method. The polymers are synthesized in free-of-acid conditions, using an activated montmorillonitic clay catalyst, known as Maghnite-H+ (Mag-H) as proton source. The electrochemical behaviour of poly(o-anisidine) created using Mag-H (PoANI-MagH) and their copolymers with aniline is quite different of those polymers created in HCl solution. In situ Raman data suggest that the structure of PoANI-MagH is a mixture of conducting (polyaniline-type) and redox (phenoxazine or phenazine-type) segments. 相似文献
19.
The adsorption isotherm for the alumina-3-nitro-o-toluidine— benzene system was measured by the chromatographic and the batch methods. The chromatographic method gave a much higher value for the amount of solute adsorbed than the batch method. The isotherm of the alumina— trans-p-methoxyazobenzene— benzene system was also measured chromatographically; it was confirmed that this isotherm is concave to the C-axis. The proposed f(1) method for standardizing adsorbents was thus confirmed. 相似文献
20.
An organic-inorganic hybrid poly-o-toluidine Th(IV) phosphate was chemically synthesized by mixing ortho-tolidine into the gel of Th(IV) phosphate in different mixing volume ratios, concentration of inorganic reactant with a fixed mixing volume ratios of organic polymer. The physico-chemical characterization was carried out by elemental analysis, TEM, SEM, XRD, FTIR and simultaneous TGA-DTA studies. The ion-exchange capacity, chemical stability, effect of eluant concentration, elution behavior and pH titration studies were also carried out to understand the ion-exchange capabilities. The distribution studies revealed that the cation-exchange material is highly selective for Hg2+, which is an important environmental pollutant. Due to selective nature of the cation-exchanger ion-selective membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The analytical utility of this electrode was established by employing it as an indicator electrode in electrometric titrations. 相似文献