Electric field-induced cubic phase in 4'-n-docosyloxy-3'-nitrobiphenyl-4-carboxylic acid

We examine the influence of an alternating-current electric field on the lamellar smectic C (SmC) phase of 4'-n-docosyloxy-3'-nitrobiphenyl-4-carboxylic acid, and the formation of a field-induced cubic (Cub) phase with optical isotropy was observed for the first time. The induction was realized down to a temperature 10 K below the zero-field SmC to Cub phase transition temperature (TSmC-Cub). The formation of the induced Cub phase gave rise to a gradual increase of the shear storage modulus, and the modulus recovered quickly in response to the removal of the field, which is of interest as future applications to the stress transferring device.     

Further evidence for phase transitions in biphenyl near 40 K and 16 K

Phase transitions have been detected in biphenyl at about 42 and 17 K by noting changes in the transmitted light intensity when the crystal is placed at extinction between crossed polaroids and the crystal temperature slowly varied. The phase transition at 42 K is gradual (i.e. it occurs over a range of temperature) while the 17 K transition is abrupt. The effect is observed only for light propagating normal to an a*b section which implies that the atomic displacements at the phase changes are largely restricted to this plane. An analogous behaviour is observed for biphenyl-d₁₀ except that the onset of the gradual transition on cooling is at 38 K and the abrupt transition is at 24 K.     

Orientational phase transition in a charge-transfer crystal: Triplet excitons as probes for lattice dynamics

The orientational phase transition in the charge-transfer (CT) crystal anthracene-TCNB (s-tetracyanobenze) is investigated by ESR and by Raman spectroscopy. ESR spectra of triplet excitons are observed and analysed with respect to orientational changes during the transition between two different phases. The data yield the mean molecular orientations fx (relative to a crystal fixed axis) as a function of temperature. Besides a gradual orientational change with temperature there is also an abrupt change (Δ fx ≈ 5° within 1 K) at the transition temperature suggesting a first order phase transition. A model is presented that uses exciton dynamics as a probe for lattice dynamics. The size of domains of equally oriented molecules is obtained as a function of temperature. The phase transition is also detected from the appearance of different phonon lines in the Raman spectra. These spectra gain their special value from a comparison with the behaviour of an order parameter fx, characterizing the phase transition.     

Ferroelectric properties of smectic C liquid crystals with induced helical structure

Ferroelectricity has been observed in liquid crystalline mixtures of chiral smectic C type with a helical structure induced by chiral guest molecules (pitch p ≈ 100 μm). Samples of thickness d?p form monodomains with finite zero-field electric polarization because the spontaneous polarization of the smectic layers is not compensated by the helical twist. The temperature dependence of the spontaneous polarization has been studied near the phase transition smectic C→ smectic A.     

Dependence of thermal stability and thermomechanical characteristics of non-crystalline chalcogenides in the Cu-As-Se system on copper content

We have developed a modified power-compensation DSC to evaluate the electrocaloric properties of ferroelectrics. With this apparatus, latent heat of electric-field-induced phase transition in Ba_0.73Sr_0.27TiO₃ (BST) ferroelectric ceramics has been investigated in detail. It varies with temperature and reaches its climax at 25°C, close to the ferroelectric-paraelectric phase transition temperature, when induced by the same electric field of 15 kV cm^-1. The theoretical saturated endothermicity induced by enough high electric field at 25°C is expected to 0.59 J g^-1, which is 84% of the total phase transition latent heat of BST. At last the origins of difference between exothermicity and endothermicity are discussed.     

Synthesis and characterization of thermoresponsive hydrogels cross-linked with acryloyloxyethylaminopolysuccinimide

Biodegradable cross-linkers acryloyloxyethylaminopolysuccinimide (AEA-PSI) were obtained by microwave irradiation using maleic anhydride as materials. With AEA-PSI cross-linker, cross-linked poly(N-isopropylacrylamide-co-acrylic acid) [P(NIPAAm-co-AAc)] hydrogels were prepared, and their phase transition behavior, lower critical solution temperature (LCST), water content, thermodynamics stability, and enzymatic degradation properties were investigated. By alternating the NIPAAm/AAc molar ratio, hydrogels were synthesized to have LCST in the vicinity of 37 °C. The LCST of AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was significantly influenced by monomer ratio of the NIPAAm/AAc but not by the cross-linking density within the polymer network. The water content of AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was more than 90% even at 37 °C, which was controlled by the monomer molar ratio of NIPAAm/AAc, swelling media, and the cross-linking density. The thermodynamics stability was also characterized by thermogravimetry. In enzymatic degradation studies, breakdown of the AEA-PSI-cross-linked P(NIPAAm-co-AAc) hydrogels was dependent on the cross-linking density. Submitted to Colloid and Polymer Science, 2007-1-28.     

Glucosamine-carrying temperature- and pH-sensitive microgels: preparation, characterization, and in vitro drug release studies

Glucosamine-carrying temperature- and pH-sensitive microgels with an average diameter of about 100 nm were successfully prepared by free radical precipitation polymerization. The thermo- and pH-responsive properties of the microgels were designed by the incorporation of N-isopropylacrylamide (NIPAM) and acrylic acid (AAc) to copolymerize with acrylamido-2-deoxyglucose (AADG). The stimuli sensitivity of the microgels was studied by the measurement of their sizes and volume phase transition temperature (VPTT) under different surrounding conditions. The results showed that the microgels were responsive to temperature, pH, and ionic strength, and could have a desired VPTT by modifying AADG and AAc contents. The effect of temperature and pH on insulin release from the microgels was also investigated. The release of drug at the tumor-surrounding environment is faster than that under normal physiological conditions. A preliminary in vitro cell study showed that the glucosamine-carrying microgels are more biocompatible to mouse fibroblast cells, compared to the microgels without glucosamine. These glucosamine-carrying dual-sensitive microgels may be promising carriers for targeted drug delivery to tumors.     

Effect of electric field on phase separation of polymer dispersed liquid crystal

The kinetics of the polymerization induced phase separation of liquid crystal (LC)/monomer mixture has been investigated by means of depolarized light intensity technique and polarized light microscope (PLM). To examine the effect of the electric field, a DC electric field was applied across the mixtures during the phase separation process. The kinetic study indicates that the phase separation process is accelerated when the electric field is applied. The morphologies of the formed polymer dispersed liquid crystal (PDLC) films were observed by PLM. The electric field applied during the phase separation process yields the PDLC with small LC domains and fine morphologies. The clearing temperature (T_NI) of the formed PDLC films was measured by the PLM and it is found that the T_NI increases with the applied electric field intensity.     

Crystal phase transformations within propylene/hexene-1 copolymers films as induced by direct current discharge treatment

The effect of a direct current discharge on the films of polypropylene and copolymers of propylene and hexene-1 synthesized with an isospecific catalytic system, rac-Me₂SiInd₂ZrCl₂-polymethylaluminoxane, was investigated. The treatment of isotactic polypropylene films by the discharge did not affect the ratio of crystalline phases in the polymer to a measurable extent. However, for the plasma treated films of copolymers of propylene and hexene-1 (the hexene-1 content of 1-2 mol%), a structural transformation of γ-modification into α-modification has been noticed. The observed phase transition has no apparent relation to any changes in microstructure of the copolymer chain because melting temperature values and the stereoregularity parameters of the samples remained practically unchanged. An experimental investigation of the specific influence exerted by individual components of a direct current discharge on the crystalline structure of copolymers has been undertaken. The exposure to a quantum component of the discharge did not induce any changes in the phase composition of the irradiated samples. The heating of the samples led to a negligible change of their phase composition. It has been determined that the surface of polypropylene and propylene/hexene-1 copolymer films facing the cathode in the course of the direct current discharge treatment had an accumulated negative charge Q > 10 nC/cm² which persisted for a long time afterwards. It has been suggested that the electrical field of a negative discharge may be the main cause of the γ-into α-phase transition in propylene/hexene-1 copolymers under the plasma effect. To verify this assumption, a propylene/hexene-1 copolymer film was charged under electron beam with energy of 4 keV. The electron beam treatment of the film resulted to the negative charge value of 11 nC/cm². The electron beam irradiation has induced the phase transition which was quite similar to the transition observed as the result of plasma treatment. So, it may be concluded that the phase transition from crystal γ-modification to α-modification under the effect of direct current discharge which has been investigated for copolymers of propylene and hexene-1 is induced by electric field of the negative charge accumulated at the surface layers of the films of the copolymers.     

The effect of concentration of acrylic acid,dose rates and temperature on preirradiated graft of natural rubber-based thermoplastic elastomer

Grafting acrylic acid (AAc) onto thermoplastic elastomer (TE) films, a kind of product from natural rubber latex block-grafted by methyl methacrylate monomer was investigated. The preirradiated dose from a gamma Co-60 source for TE at 75 kGy was considered to be useful. Significant concentration of AAc aqueous solution for the grafting process is 20% (vol%). Dose rate of about 3.4 kGy/h is more effective for the graft. The temperature of around 90°C is suitable for obtaining a higher degree of graft. It is observed that the rate of grafting of AAc onto TE is proportional to 0.48 power of dose rate and 1.9 power of AAc concentration. The rate of grafting can be expressed as R_g=k·I^0.48·M^1.9. On the other hand, overall activation energy of the graft is estimated about 7.2 Kcal/mol. The FTIR spectrum analysis of TE and TE-g-AAc films was proceeded.     

Spectroscopic studies on the effect of field strength upon the curie transition of a VDF/TrFE copolymer

Infrared spectroscopic studies of the effects of field strength upon the ferroelectric phase transition behavior of a VDF/TrFE (75/25) copolymer upon heating and cooling in an electric field have revealed new findings. The paraelectric phase in the absence of an electric field resembles the α phase of PVDF with a trace of short trans sequences distributed randomly along the chain axis. The paraelectric phase in a high electric field is very different from that in the absence of an electric field. The paraelectric phase under an electric field has much longer trans sequences. The Curie transition temperature upon heating is a first-order transition temperature (T^↑_c) and is dramatically elevated from 120 to 135°C under the field of more than 0.4 MV/cm. Upon cooling, the paraelectric phase in an electric field does not show a clear transition. The field-induced phase transition and the loss of dipole switchability observed below a cooling temperature of 120°C, and their dependence on time and filed strength when exposed to a cyclic bipolar electric field are discussed. © 1993 John Wiley & Sons, Inc.     

Prewetting transition induced by an external bulk field

The Landau-de Gennes model of the boundary layer phase transition in nematic liquid crystals is extended to include electric field effects. Calculations are performed in the case of a semi-infinite nematic sample bounded by a solid wall. The phase diagrams presented show that the prewetting transition can be induced by the electric field. The transition moves to higher temperature with increasing field and disappears above the prewetting critical point. A system exhibiting partial wetting should transit to complete wetting under a high enough electric field. These predictions are confirmed within the actual experimental limits.     

Deformation temperature and lamellar thickness dependency of Form I to Form III phase transition in syndiotactic polypropylene during tensile stretching

Phase transition from form Ⅰ to form Ⅲ in syndiotactic polypropylene crystallized at different conditions during tensile deformation at different temperatures was investigated by using in situ synchrotron wide angle X-ray diffraction technique. In all cases, the occurrence of this phase transition was observed. The onset strain of this transition was found to be crystalline thickness decided by crystallization temperature and drawing temperature dependent. The effect of drawing temperature on this phase transition is understood by the changes in mechanical properties with temperature. Moreover, crystalline thickness dependency of the phase transition reveals that this form Ⅰ to from Ⅲ phase transition occurs first in those lamellae with their normal along the stretching direction which have not experienced stress induced melting and recrystallization.     

A comparison of the swelling behaviour of copolymer and interpenetrating network microgel particles

 A comparison of the swelling behaviour of two types of hydrogel particles, namely, random poly[(acrylic acid)-co-(acrylamide)] [P(AAc-co-AAm)] particles and PAAc/PAAm interpenetrating network (IPN) particles, has been made using temperature and pH as the triggers. Both types of particles were synthesised by inverse microemulsion polymerisation. The conversion yield of AAc was found to be around 60 wt% due to the partition of this monomer between the aqueous and organic phases. The AAc content was thus lower in the final particles than in the initial composition. Both types of hydrogel particle exhibit an upper critical solution temperature associated with the breakage of the polymer–polymer hydrogen bonds. The maximum swelling ratio occurred in both cases at approximately equimolar AAc and AAm content of the particles. A sharper swelling transition was observed for the PAAc/PAAm IPN particles. This is because of the co-operative nature of the interactions between the PAAc and PAAm chains, the so-called “zipper effect”. A very much higher swelling ratio was obtained using pH as the trigger compared to using temperature. This difference in behaviour is related to the relative strengths of the forces involved in the particle swelling. Electrostatic repulsion forces, associated with the AAc dissociation with increasing pH, are much stronger than the hydrogen bonds. Received: 18 August 1999/Accepted: 28 August 1999     

Graft copolymerization kinetics of acrylic acid onto the poly(ethylene terephthalate) surface by atmospheric pressure plasma inducement

After one atmospheric pressure plasma treatment of poly(ethylene terephthalate) (PET) film, acrylic acid (AAc) in aqueous solution was successfully graft‐copolymerized onto PET films. The effects of reaction time, AAc monomer concentration and reaction temperature on grafting behavior of AAc were systematically studied. Possible reaction kinetics of plasma‐induced graft copolymerization, starting from initial hydroperoxide decomposition, were proposed. Through the Arrhenius analysis about graft copolymerization kinetics of AAc monomers on PET surface, it was revealed that the activation energies of decomposition, propagation and termination were 98.4, 63.5, and 17.5 kJ/mol, respectively. The temperature around 80 °C was favorable not only for the formation of oxide radicals through the thermal decomposition of hydroperoxide on PET surface but also for the extension of graft copolymer chain through direct polymer grafting. Poly(acrylic acid) (PAAc) grains grafted onto PET surfaces possessed relatively uniform size and both PAAc grain size and surface roughness increased with increasing the grafting degree of AAc. The increase of grain size with increasing grafting degree results from the possibility of forming long chain graft copolymers and their shielding of reactive sites. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1594–1601, 2008     

A bent-shape liquid crystal compound with antiferroelectric triclinic-monoclinic phase transition

Electro-optical and polarization current measurements on 1,3-phenylene-bis[4-(3-fluoro-4-decyloxyphenyliminomethyl) benzoate] (3F-10-O-PIMB) revealed a second order phase transition between two antiferroelectric ‘smectic banana’ phases. The observations show that the switching between the ferroelectric states in the higher temperature (HT) phase requires higher thresholds than in the lower temperature (LT) phase. It is hypothesized that the HT phase has a lower (triclinic, C₁) symmetry, than that of the LT phase (monoclinic, C₂). It is also shown that electric fields can induce transitions between different ‘smectic banana’ phases.     

Sign of the electric field gradient tensor and the nature of the low temperature phase transition in Fe(pyridine)2Cl2

Mossbauer spectra of Fe(pyridine)₂Cl₂ have been determined in large external magnetic fields at room temperature and 78 K. The principal component of the electric field gradient tensor is positive and consistent with an electron in the d_xy orbital. The results indicate no change in orbital ground state for the low temperature phase transition of this material.     

Synthesis and characterization of thermosensitive copolymers for oral controlled drug delivery

Poly(N-isopropylacrylamide) (PNIPAAm) copolymers were synthesized in order to obtain co-polymers with a phase transition temperature slightly higher than the physiological temperature, as required by a new drug delivery concept described in a previous paper. Six hydrophilic comonomers bringing about a rise of the phase transition temperature were evaluated. The synthesized copolymers were characterized and the influence of the type and of the amount of the used comonomer on the phase transition temperature was discussed. Among the comonomers, Acrylamide (AAm), N-methyl-N-vinylacetamide (MVA), N-vinylacetamide (NVA), and N-vinyl-2-pyrrolidinone (VPL) were found to be capable to raise the phase transition temperature to a value slightly higher than 37 °C and to have adequate phase transition behavior. The selected four copolymers were subjected to an additional purification step that should make them fit to use as a controlling agent in drug delivery systems.     

Thermoresponsive conductivity of poly(N‐isopropylacrylamide)/potassium chloride gel electrolytes

A series of thermoresponsive polymer gel electrolytes (PGEs) based on poly(N‐isopropylacrylamide) in aqueous potassium chloride was synthesized by radiation‐induced polymerization and gelation using γ rays from a ⁶⁰Co source. The electric conductivity and swelling properties of the PGE were determined as a function of temperature. It was found that the electric conductivity of the PGE depended strongly on the swelling ratio; most notably, it changed drastically near the volume phase‐transition temperature of the PGE. The temperature/conductivity profile of the PGE exhibits a maximum peak at a certain temperature that is defined as the maximum conductivity temperature (T_max). The T_max of all of the PGEs prepared by low‐dose irradiation agreed with the temperature, near the end of the volume phase transition, where the PGE was completely shrunken. Consequently, the conductivity of gels should provide a good method with which the totally shrunken temperature of the thermoresponsive gels can be monitored with good temperature precision. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 134–141, 2002     

Aam/Aac水凝胶对碱性藏花红染料的吸附特性研究

以丙烯酰胺(AAm)、丙烯酸(AAc)合成了单体配比分别为1，2、1／1、2，1的AAm/AAcc水凝胶，采用分光光度计法研究了此水凝胶对水溶性单价阳离子染料碱性藏花红的吸附特性，测定了它们的吸附动力学曲线和吸附等温线：探讨了水凝胶单体组成对该染料吸附性能的影响：并且用静电场理论解释了解吸后水凝胶更优的再吸附特性，研究表明，AAm，AAc水凝胶可作为染料污水处理中一种良好的吸附剂。