Synthesis of AB2 miktoarm star-shaped copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with two initiating groups for atom transfer radical polymerization (ATRP), 4-(2,2-bis-(methyl 2-bromo isobutyrate)-propionyloxy)-2,2,6,6-tetramethyl-1-piperidinyloxy (Br₂-TEMPO), was synthesized by reacting 4-hydroxyl-2,2,6,6-tetramethyl-1-piperidinyloxy with 2,2-bis-(methyl 2-bromo isobutyrate) propanoic acid. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br₂-TEMPO. The obtained polystyrene had two active bromine atoms for ATRP at the ω-end of the chain and was further used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare AB₂-type miktoarm star-shaped copolymers. The molecular weights of the resulting miktoarm star-shaped copolymers at different monomer conversions shifted to higher molecular weights without any trace of the macroinitiator, and increased with monomer conversion.     

Kinetics of free radical polymerization—XXXI. Solvent effect on the polymerization rate of ethyl acrylate

The free radical polymerization of ethyl acrylate was investigated in benzene and dimethyl formamide solutions at 50°. The effects of initiator and monomer concentration were studied over a wide range. The overall rate of polymerization was proportional to (initiator concentration)^{$\text{1}\text{2}$} but not to the concentration of the monomer. We attempted to interpret this solvent effect on the basis of (i) the diffusion theory, (ii) the theory of charge transfer complexes and (iii) the theory of hot radicals. Our experimental results could only be explained quantitatively in terms of hot radicals.     

Comparative study of the absolute reactivity of vinyl monomers: Kinetics of polymerization of vinyl monomers initiated by Mn3+–thiodiglycolic acid redox system

The kinetics and mechanism of polymerization of methacrylic acid (MAA) and ethyl acrylate (EA) initiated by the redox system, Mn³⁺–thiodiglycolic acid (TDGA) were investigated in the 15–35°C temperature range. The polymerization kinetics of both the monomers followed the same mechanism, viz., initiation by primary radical and termination by Mn³⁺–thiodiglycolic acid complex. The rate coefficients k_i/k₀ and k_p/k_t were related to the monomer reactivity and polymer radical reactivity, respectively. It was observed that both monomer reactivity and polymer radical reactivity followed the same order, viz., EA > MAA. The polymer radical reactivity varied inversely with the Q values of the monomers.     

Acyclic diene metathesis polymerization of tailor-made monomers towards sequence-regulated vinyl copolymers

 Acyclic diene metathesis polymerization (ADMET) enables convenient transfer of sequential information of the designed monomers to the corresponding sequence-regulated copolymers. In this study, two structurally symmetric monomers, M1 and M2, were synthesized via atom transfer radical addition (ATRA) of diethyl meso-2,5-dibromohexanedioate with 1,5-hexadiene and 1,7-octadiene, respectively. Thus, sequenced segment of VB-EA-EA-VB (VB and EA represent vinyl bromide and ethyl acrylate, respectively) was incorporated into the ADMET diene monomers. ADMET polymerization of these two monomers with Grubbs first generation catalyst (Grubbs-I) was performed in CH₂Cl₂ at 40℃ for 5 days under nitrogen purge. Effects of catalyst amount, monomer concentration and methanol precipitation on the M_p and PDI of polymers were investigated by GPC, and the structures of the formed polymers were characterized by NMR. Our results indicate that using 3.0 mol% of Grubbs-I to monomer can afford polymers with high M_p. Moreover, selective precipitation in methanol enables complete removal of low molecular weight components from the crude products. Meanwhile, M2 exhibits higher ADMET polymerization reactivity than M1 due to its capability of suppressing negative neighboring group effect.     

Synthesis of diblock copolymers by combining stable free radical polymerization and atom transfer radical polymerization

A stable nitroxyl radical functionalized with an initiating group for atom transfer radical polymerization (ATRP), 4‐(2‐bromo‐2‐methylpropionyloxy)‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy (Br‐TEMPO), was synthesized by the reaction of 4‐hydroxyl‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy with 2‐bromo‐2‐methylpropionyl bromide. Stable free radical polymerization of styrene was then carried out using a conventional thermal initiator, dibenzoyl peroxide, along with Br‐TEMPO. The obtained polystyrene had an active bromine atom for ATRP at the ω‐end of the chain and was used as the macroinitiator for ATRP of methyl acrylate and ethyl acrylate to prepare block copolymers. The molecular weights of the resulting block copolymers at different monomer conversions shifted to higher molecular weights and increased with monomer conversion. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2468–2475, 2006     

Synthesis of poly(ethyl acrylate) by single electron transfer‐degenerative chain transfer living radical polymerization in water catalyzed by Na2S2O4

Living radical polymerization of ethyl acrylate was achieved by single‐electron‐transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionite. The plots of number‐average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This method leads to the preparation of α,ω‐di(iodo)poly(ethyl acrylate) (α,ω‐di(iodo)PEtA) macroinitiator that can be further functionalized. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering, a differential viscometer and refractive index. The method studied in this work represents a possible route to prepare well‐tailored macromolecules made of ethyl acrylate in environmental friendly reaction medium. To the best of our knowledge there is no previous report dealing with the synthesis of PEtA by any LRP approach in aqueous medium. Furthermore, the method described in this article was successfully applied in pilot scale reactions under industrial production conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 421–432, 2008     

Preparation of polyethylene block copolymers by a combination of postmetallocene catalysis of ethylene polymerization and atom transfer radical polymerization

The synthesis of block copolymers consisting of a polyethylene segment and either a poly(meth)acrylate or polystyrene segment was accomplished through the combination of postmetallocene-mediated ethylene polymerization and subsequent atom transfer radical polymerization. A vinyl-terminated polyethylene (number-average molecular weight = 1800, weight-average molecular weight/number-average molecular weight =1.70) was synthesized by the polymerization of ethylene with a phenoxyimine zirconium complex as a catalyst activated with methylalumoxane (MAO). This polyethylene was efficiently converted into an atom transfer radical polymerization macroinitiator by the addition of α-bromoisobutyric acid to the vinyl chain end, and the polyethylene macroinitiator was used for the atom transfer radical polymerization of n-butyl acrylate, methyl methacrylate, or styrene; this resulted in defined polyethylene-b-poly(n-butyl acrylate), polyethylene-b-poly(methyl methacrylate), and polyethylene-b-polystyrene block copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 496–504, 2004     

Functionalized latexes as substrates for atom transfer radical polymerization

The application of atom transfer radical polymerization (ATRP) to the homopolymerization of 2‐hydroxyethyl acrylate and 2‐(methacryloyloxy) ethyl trimethylammonium chloride at the surface of a crosslinked polystyrene latex functionalized with alkyl bromide groups is reported. Polymerization was carried out using the surface groups of the dialyzed latex as initiators. The resulting hydrophobic core, hydrophilic shell latexes, were analyzed by FTIR, ¹³C‐NMR spectroscopy, and dynamic light scattering.     

Atom transfer radical polymerization of 2-methoxy ethyl acrylate and its block copolymerization with acrylonitrile

2-Methoxy ethyl acrylate (MEA), a functional monomer was homopolymerized using atom transfer radical polymerization (ATRP) technique with methyl 2-bromopropionate (MBP) as initiator and CuBr/N,N,N′,N′,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system; polymerization was conducted in bulk at 60 °C and livingness was established by chain extension reaction. The kinetics as well as molecular weight distribution data indicated towards the controlled nature of polymerization. The initiator efficiency and the effect of initiator concentration on the rate of polymerization were investigated. The polymerization remained well-controlled even at low catalyst concentration of 10% relative to initiator. The influence of different solvents, viz. ethylene carbonate and toluene on the polymerization was investigated. End-group analysis for the determination of high degree of functionality of PMEA was determined with the help of ¹³C{¹H} NMR spectra. Chain extension experiment was conducted with PMEA macroinitiator for ATRP of acrylonitrile (AN) in ethylene carbonate at 70 °C using CuCl/bpy as catalyst system. The composition of individual blocks in PMEA-b-PAN copolymers was determined using ¹H NMR spectra.     

Evidence for chain transfer in the atom transfer radical polymerization of butyl acrylate

Poly(butyl acrylate) (PBuA) of high molecular weight was synthesized by atom transfer radical polymerization (ATRP) in ethyl acetate. Whereas for low molecular weight polymers, a linear increase of the number‐average molecular weight, M_n, versus conversion and narrow molecular weight distributions indicate the suppression of side reactions, a downward curvature in the plot of M_n versus conversion was observed for high molecular weights (M_n > 50 000). This effect is explained by chain transfer reactions, leading to branched polymers. GPC measurements with a viscosity detector give evidence for the branched structure of high molecular weight polymers obtained in ATRP. In addition, transfer to solvent or monomer is likely to occur.     

Novel miktofunctional initiator for the preparation of an ABC‐type miktoarm star polymer via a combination of controlled polymerization techniques

An ABC‐type miktoarm star polymer was prepared with a core‐out method via a combination of ring‐opening polymerization (ROP), stable free‐radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, ROP of ϵ‐caprolactone was carried out with a miktofunctional initiator, 2‐(2‐bromo‐2‐methyl‐propionyloxymethyl)‐3‐hydroxy‐2‐methyl‐propionic acid 2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yl oxy)‐ethyl ester, at 110 °C. Second, previously obtained poly(ϵ‐caprolactone) (PCL) was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PCL–polystyrene (PSt) precursor with a bromine functionality in the core was used as a macroinitiator for ATRP of tert‐butyl acrylate in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 100 °C. This produced an ABC‐type miktoarm star polymer [PCL–PSt–poly(tert‐butyl acrylate)] with a controlled molecular weight and a moderate polydispersity (weight‐average molecular weight/number‐average molecular weight < 1.37). The obtained polymers were characterized with gel permeation chromatography and ¹H NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4228–4236, 2004     

Tailor‐made poly(ethyl acrylate) by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of ethyl acrylate (EA) was carried out using different initiators, CuBr or CuCl as catalyst in combination with different ligands e.g., 2,2′‐bipyridine (bpy) and N,N,N′,N″N″‐pentamethyl diethylenetriamine (PMDETA). Use of PMDETA as ligand resulted in faster polymerization rate (95% conversion in 15 min) than those using bipyridine (～58% conversion in 10.5 h). This is due to the lower reduction potential of copper‐amine than that of copper‐bpy complex, resulting in higher rates of activation of dormant halides. Use of ethylene carbonate as solvent lead to faster polymerization rate and better control in polymerization when compared with p‐xylene as solvent. The reaction temperature had a positive effect on polymerization rate and the optimum reaction temperature was found to be 90 °C. An apparent enthalpy of activation of ～85 kJ/mol was determined for the ATRP of ethyl acrylate, corresponding to an enthalpy of equilibrium of ～64 kJ/mol. By judicious choice of the reaction parameters it was possible to tailor the end group of the final polymer. MALDI‐TOF‐MS analysis and the chain extension experiment of poly(ethyl acrylate) (PEA) prepared using bpy as ligand showed the presence of ? Br as the end group. On the contrary, when PMDETA was used as the ligand, the mass spectra analysis showed hydrogen terminated polymer as the major species towards the end of polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1661–1669, 2007     

Electron spin resonance studies of propagating radicals in polymerization. II. Acrylate propagating radicals

Ferric chloride-photosensitized free-radical initiation was used to generate propagating radicals in polymerization of acrylic acid (AA), methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), acrylamide (A), and diacetone acrylamide (DAA) in rigid glasses of methanol, ethanol, n-propanol, isopropanol, or acetone at near liquid nitrogen temperatures. When the temperatures of the glasses were increased, primary radicals derived from the solvents reacted with the monomers to yield propagating radicals. Formation and conformational changes of the propagating radicals at different temperatures were studied by electron spin resonance (ESR) spectroscopy. It was concluded that one type of propagating radical was formed in all cases. However, when the temperature of the rigid glass was increased, the structural conformation of the radical that initially allowed the near-equivalent interaction of the α-hydrogen and one of the β-hydrogens with the unpaired electron generated a three-line spectrum.     

Reverse atom transfer radical polymerization of methyl acrylate using AIBN as the initiator under heterogeneous conditions

Reverse atom transfer radical polymerization of methyl acrylate in the presence of a conventional radical initiator (2,2′-azoisobutyronitrile, AIBN) in bulk was successfully implemented via a new polymerization procedure. The system first reacts at 65–70°C for ten hours, then polymerizes at 100°C. Various mole ratios of AIBN to Cu^IICl₂ were used in this work, all of which result in a well-controlled radical polymerization with high initiation efficiency and narrow molecular weight distribution, i.e., the polydispersity is as low as M̄_w/M̄_n = 1.36.     

Polymerization Kinetics of n-Lauryl Acrylate

The polymerization kinetics of n-lauryl acrylate have been investigated in ethyl acetate and n-heptane at 40°C. A high monomer order, 1.6(5), was found in both solvents. Corresponding initiator orders, determined using Azdn and lauroyl peroxide, were slightly less than the usual value of 0.5. Although the chain termination reaction is undoubtedly diffusion controlled from the start of polymerization, diffusion effects dependent on monomer concentration only partly account for the high monomer order. Other possible explanations based on primary radical termination, “cage-effects,” degradative chain transfer, and radical complexing are also not applicable. Contrary to observations with lower acrylate esters, autoacceleration effects do not occur in the high conversion polymerization of n-lauryl acrylate. Ths probably reflects the reduced importance of radical branching reactions with this monomer.     

Aqueous polymerization of ethyl acrylate initiated by ceric ion-reducing agent system in sulphuric acid medium

Kinetic study of aqueous polymerization of ethyl acrylate (EA) is carried out at 30 °C in dilute sulphuric acid medium by employing ammonium ceric sulphate–methyl ethyl ketone (MEK) as redox initiator system. The ceric ion consumption is found to be first order with respect to ceric ion and half order with respect to reducing agent concentrations. No complex formation between ceric ion and reducing agent is observed. The orders with respect to ceric ion, reducing agent and monomer concentrations are evaluated for the aqueous polymerization of EA by Ce(IV)–MEK redox initiator system, and are found to be 0.5, 0.5 and 1.4, respectively . The overall activation energy, E _overall, for aqueous polymerization of EA in the temperature region of 27–40°C is found to be 20.27 kJ/mol. A kinetic scheme for the aqueous polymerization of EA initiated by Ce(IV)–MEK redox initiator system is presented.This revised version was published online in June 2005 with corrections to figure legends as well as small corrections within text.     

EPR study of the atom transfer radical polymerization (ATRP) of (meth)acrylates

Electron paramagnetic resonance (EPR) spectroscopy was applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and methyl acrylate (MA) in order to investigate the mechanism of the controlled/“living” radical polymerization system. Although initially only copper(I) species was added to the system as a catalyst, EPR signals of copper(II) species were observed during the polymerization of MMA initiated by ethyl 2-bromoisobutyrate and p-methylbenzenesulfonyl chloride, and polymerization of MA initiated by methyl 2-bromopropionate. As the polymerization proceeded, the concentration of copper(II) increased gradually until a steady state was reached. The EPR results indicate that 5–6% of copper(I) species converted to copper(II) species in polymerization of MMA and about 3% in polymerization of MA at 90°C.     

Synthesis of Graft Copolymers Based on Poly(2‐Methoxyethyl Acrylate) and Investigation of the Associated Water Structure

Graft copolymers composed of poly(2‐methoxyethyl acrylate) are prepared employing controlled radical polymerization techniques. Linear backbones bearing atom transfer radical polymerization (ATRP) initiating sites are obtained by reversible addition–fragmentation chain transfer copolymerization of 2‐methoxyethyl acrylate (MEA) and 2‐(bromoisobutyryloxy)ethyl methacrylate (BrⁱBuEMA) as well as 2‐hydroxyethyl methacrylate and BrⁱBuEMA in a controlled manner . MEA is then grafted from the linear macroinitiators by Cu (I)‐mediated ATRP. Fairly high molecular weights (>120 000 Da) and low polydispersity indices (1.17–1.38) are attained. Thermal investigations of the graft copolymers indicate the presence of the freezing bound water, and imply that the materials may exhibit blood compatibility.     

Atom transfer radical polymerization of hexyl acrylate and preparation of its “all‐acrylate” block copolymers

This investigation reports the polymerization of hexyl acrylate (HA) using atom transfer radical polymerization technique and subsequently the preparation of its di‐ and triblock copolymers with methyl methacrylate. Atom transfer radical polymerization of HA was investigated using different initiators and CuBr or CuCl as catalyst in combination with varying ligands, e.g., 2,2′‐bipyridine and N,N,N′,N″,N″‐pentamethyl diethylenetriamine. Reaction parameters were adjusted to successfully polymerize HA with well‐defined molecular weights and narrow polydispersity indices. The polymerization was better controlled by the addition of polar solvents, which created a homogeneous catalytic system. UV–vis analysis showed that the polar solvent, acetone coordinated with copper (I), changes the nature of the copper catalyst, thereby influencing the dynamic equilibrium of activation–deactivation cycle. This resulted in improved control over polymerization as well as in lowering the polydispersity indices, but at the cost of polymerization rate compared with the bulk process. The presence of ? Br end group in the polymer chains was confirmed by ¹H NMR as well as MALDI‐TOF mass analysis. In addition, poly(hexyl acrylate) was used as macroinitiator to prepare various “all‐acrylate” block (diblock, triblock) copolymers that were characterized by GPC and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3499–3511, 2008     

Synthesis of perfectly bifunctional polyacrylates by single‐electron‐transfer living radical polymerization

Poly(methyl acrylate)s, poly(ethyl acrylate)s, and poly(butyl acrylate)s with α,ω‐di(bromo) chain ends and M_n from 8500 to 35,000 were synthesized by single‐electron‐transfer living radical polymerization (SET‐LRP). The analysis of their chain ends by a combination of ¹H and 2D‐NMR, GPC, MALDI‐TOF MS, chain end functionalization, chain extension, and halogen exchange experiments demonstrated the synthesis of perfectly bifunctional polyacrylates by SET‐LRP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4684–4695, 2007