Properties of polyethylene modified with phosphonate side groups. I. Thermal and mechanical properties

Low-density polyethylene was modified by the inclusion of phosphonate ester pendent groups by using an oxidative chlorophosphonylation reaction followed by esterification of the polyethylene poly(phosphonyl chloride) with an alcohol. Two different types of phosphonate esters were prepared: dimethyl phosphonate from the reaction with methanol and a phosphonate graft copolymer from the reaction with hydroxy-terminated poly(ethylene oxide) (PEO). For the latter, oligomers with molecular weights of 350 and 750 were used. For each type of phosphonate, a series of polymers were prepared with pendent group concentrations ranging from 0 to 9.1 substituents per 100 carbon atoms. The modified polymers were characterized by infrared spectroscopy, differential scanning calorimetry, and by measurement of the tensile modulus. Infrared spectroscopy proved to be useful for determining if the polymer modification reaction resulted in entirely phosphonate ester pendent group substitutions or if unesterified phosphonic acid groups were also present. The polymers prepared in this investigation exhibited no infrared absorbances arising from phosphonic acid groups. The presence of phosphonate ester groups resulted in a decrease of crystallinity with increasing phosphonate concentration and with the exception of the polymers containing 9.1 PEO–phosphonate grafts per 100 carbon atoms, the effect of phosphonylation on the melting temperature of the polymers was consistent with Flory's theory for the melting point depression of random copolymers. The tensile modulus measured from a constant uniaxial elongation experiment decreased with increasing phosphonylation. The behavior of all three phosphonate series was identical and could be attributed to the effect of decreasing polymer crystallinity.     

Transesterification of oligomeric dialkyl phosphonates,leading to the high‐molecular‐weight poly‐H‐phosphonates

Polycondensation of 1,10‐decanediol with dimethyl‐H‐phosphonate taken in excess leads to oligomers with methyl‐H‐phosphonate end groups. The polytransesterification of the resulting oligomer as well as the related model reactions were studied. The synthesis of poly(decamethylene‐H‐phosphonate) was analyzed and the final product had M̄_n = 1.4–1.9 10⁴ (from end groups, vpo, and M̄_n of the derived polymers). The exchange of the ester groups between two homoesters (dimethyl and diethyl phosphonates) used as models, conducted at r.t. and catalyzed by metal alkoxide provides mixed (hetero) ester in a few minutes. If the concentration of the catalyst is not high enough, then the reaction does not go to equilibrium, because the alcoholate anions are converted into the anions of monoesters of the H‐phosphonic acid, catalytically inactive at this temperature. However, these monoesters become catalytically active at higher temperature, i.e., at the conditions used for preparing higher molecular‐weight products by transesterification. The apparent rate constants (k̄) of the ester exchange catalyzed by monoester salt (modeling the propagation step in polytransesterification) were determined by two independent methods; at 130°C k̄ ∼ 1.0 · 10⁻² mol⁻¹ · L · s⁻¹. The detailed study of the model polytransesterification, and particularly of the polymer end groups appearance and disappearance (studied by ¹H‐, ¹³C‐, and ³¹P‐NMR) allowed postulation of the reaction mechanism and confirmed our previous work, describing formation at these conditions of polymers with M̄_n > 10⁴. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1365–1381, 1999     

New mixed phosphonate esters by transesterification of pinacol phosphonates and their use in aldehyde and ketone coupling reactions with nonstabilized phosphonates

Alkylpinacol phosphonates were prepared by rhodium-catalyzed olefin hydrophosphorylation, and attempted alpha-deprotonation of the pinacol derived alkyl phosphonates resulted in ring cleavage. The propensity of the alkylpinacol phosphonates to undergo ring opening was exploited to prepare phosphonic acid monomethyl esters in high yield by transesterification in acidulated methanol. Esterification and alkylation with aldehydes or ketones gave beta-hydroxy mixed phosphonate esters. tert-Butyl and benzylic phosphonate ester protective groups were introduced to improve the efficiency and functional group compatibility of beta-hydroxy phosphonate saponification. The beta-hydroxy phosphonic acid monomethyl esters were dehydrated with diisopropylcarbodiimide, which gave oxaphosphetane intermediates that collapse to an olefin. The overall reaction sequence complements the arsenal of Horner-Wadsworth-Emmons-type coupling reactions.     

Synthesis and characterization of phosphonate‐containing polysiloxanes

Phosphonate‐functionalized polysiloxanes have been prepared with a new siloxane/phosphonate monomer. The reaction of 3‐chloropropylmethyldimethoxysilane with trimethylphosphite or triethylphosphite produces several new monomers containing pendant phosphonate groups. Copolymerization with dimethyldimethoxysilane has produced polymers soluble in most organic solvents. The acid hydrolysis of the phosphoryl esters has produced hydrophilic siloxane polymers containing phosphonic acid groups. The thermal properties of the polymers and several related small molecules have been compared with thermogravimetric analysis. Both the monomers and the resulting polymers have been characterized with ¹H, ¹³C, ³¹P, and ²⁹Si NMR. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 48–59, 2003     

SYNTHESIS, CHARACTERIZATION AND RING-OPENING POLYMERIZATION OF CYCLIC (ARYLENE PHOSPHONATE) OLIGOMERS

INTRODUCTIONThe use of cyclic oligomers as macrocyclic precursors for the preparation of high performance polymers byring-opening polymerization (ROP) has sparked much interest in recent years. It could produce a revolutionarychange in the preparation of advanced composite materials, and is of great importance in the polymerizationprocess yielding polymers such as the reinforced reactive injection model (RRIM) and the resin transfer model(RTM) etc. Within the last 10 years, the synthes…     

Synthesis of ω‐phosphonated poly(ethylene oxide)s through the combination of kabachnik–fields reaction and “click” chemistry

The synthesis of new ω‐phosphonic acid‐terminated poly(ethylene oxide) (PEOs) monomethyl ethers was investigated by the combination of Atherton–Todd or Kabachnik–Fields reactions and the “click” copper‐catalyzed 1,3‐dipolar cycloaddition of azides and terminal alkynes. The Atherton–Todd route fails to give the corresponding phosphonic acid‐terminated PEOs due to competitive cleavage of the P? N bond during the dealkylation step. In contrast, the Kabachnik–Fields route leads with very good yields to ω‐phosphonic acid‐PEO through “click” reaction of azido‐PEO onto dimethyl aminopropargyl phosphonate prepared by Kabachnik–Fields reaction between propargylbenzylimine and dimethyl phosphonate, followed by acidic hydrolysis. The reported methodology, precluding the use of anionic polymerization of ethylene oxide, leads to novel well‐defined phosphonic acid‐terminated PEOs from commercially available products in good yields. Moreover, such a strategy can be adapted to anchor phosphonic acid functionality onto a wide range of polymers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Microwave‐Assisted Single‐Step Synthesis of Poly(alkylene hydrogen phosphonate)s by Transesterification of Dimethyl Hydrogen Phosphonate with Poly(ethylene glycol)

Summary: Poly(alkylene hydrogen phosphonate)s with a number‐average molecular weight of about 3 000 Da were obtained by a transesterification of dimethyl hydrogen phosphonate with poly(ethylene glycol) (PEG 400) under microwave irradiation with a very short reaction time (55 min) relative to that of classical thermal heating (9 h). The structure of the resulting polymer was confirmed by ¹H, ³¹P, and ¹³C NMR spectroscopy. The molecular weight was determined by ¹H, ³¹P{H} NMR spectroscopy, MALDI‐TOF, and GPC.

The transesterification of dimethyl hydrogen phosphonate with poly(ethylene glycol).     

A Straightforward Synthesis of Six‐Membered‐Ring Heterocyclic α‐Aminophosphonic Acids from N‐Acyliminium Ions

A convenient synthesis of phosphonic analogues of pipecolic acid and its heterocyclic analogues is reported. The major step of the elaborated procedure is the introduction of the phosphonate group into the skeleton of the appropriate cyclic amide through N‐acyliminium ions. The former ones were obtained by preparation of the hemiaminals or their methyl ethers from the N‐protected cyclic amides. Finally, the reaction with trimethyl phosphite in the presence of BF₃·OEt₂ afforded the desired phosphonates, which were converted into phosphonic acids by the hydrolysis of phosphonate moiety with simultaneous cleavage of the nitrogen protecting groups.     

Synthesis of Polycarbonate Diols(PCDLs) via Two-step Process Using CH3COONa as an Effective Catalyst

Polycarbonate diols(PCDLs) with a number average molecular weight(M_n) of 2800 and a narrow polydispersity index(PDI=1.33) were synthesized from dimethyl carbonate(DMC) and 1,4-butanediol(BD) via a two-step process. The influences of the molar ratios of DMC to BD in the feedstock, polycondensation temperature and polycondensation time on the PCDLs preparation were studied. CH₃COONa showed the best catalytic performance among the catalysts studied. The highest BD conversion of 73.8% and PCDLs yield of 64.7% were achieved under its optimum reaction conditions. Furthermore, based on the results of ¹H NMR, the relationships between the ratio of end groups (-OCH₃/-OH) of oligomers, the M_n and chain-end constitute of resultant polycarbonates were also investigated. The results indicate that PCDLs can be synthesized when the oligomers mostly bear hydroxyl end groups. In contrast, it was impossible to prepare PCDLs when the oligomers were enriched with methyl carbonate end groups.     

Pd(II)‐catalyzed polymerization of optically active norbornene carboxylic acid esters

(?)‐(1S,2R)‐Norbornene‐2‐carboxylic acid alkyl esters (alkyl = Me, Bz, L ‐menthyl, or D ‐menthyl) were successfully prepared by the Diels–Alder reaction of cyclopentadiene with (R)‐(?)‐pantolactone‐O‐yl acrylate followed by epimerization and column chromatography. The enantiomeric excess was 99.9%. These monomers were polymerized by Pd(II)‐based catalysts, and high yields of the polymers were obtained. The methyl ester gave an optically active polymer of high optical rotation (monomer [α]_D = ?24.7, polymer [α]_D = ?98.5). This high rotation value of the polymer was attributed to the isotactic chain regulation of the polymer. This high rotation was not observed with methyl esters prepared by the transesterification of menthyl esters. The stereoregular polymer exhibited notable resonance peaks at 39 ppm in ¹³C NMR spectra. No crystallinity was observed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1263–1270, 2006     

Preparation and properties of dimethyl phosphonomethyl methylsiloxane dimethylsiloxane copolymers

Dimethyl phosphonomethylheptamethylcyclotetrasiloxane (II) and 1, 3-bis(dimethyl phosphonomethyl)tetramethyldisiloxane (III) have been prepared by Arbuzov reaction of trimethyl phosphite with bromomethylheptamethylcyclotetrasiloxane (I) and 1, 3-bis(bromomethyl)tetramethyldisiloxane, respectively. Dimethyl phosphonomethylmethylsiloxane dimethylsiloxane copolymers have been prepared by acid-catalyzed ring-opening polymerization of II with hexamethyldisiloxane (MM) as an end-capping reagent and by reaction of II with III as an end-capping reagent. Dimethylsiloxane polymers with dimethyl phosphonomethyldimethylsiloxy end groups have been prepared by acid-catalyzed polymerization of octamethylcyclotetrasiloxane (D₄) and III. Under these conditions hydrolysis of the dimethyl phosphonate ester groups was a problem. On the other hand Arbuzov reaction of trimethyl phosphite with bromomethylmethylsiloxane dimethylsiloxane copolymer gave a dimethyl phosphonomethylmethylsiloxane dimethylsiloxane copolymer with uniform properties. These polymers have been characterized by ¹H-, ¹³C-, ²⁹Si-, and ³¹P-NMR spectroscopy. Their molecular weight distributions have been determined by gel permeation chromatography (GPC) and their thermal stability measured by TGA.     

Phosphorus-containing oligoamides obtained by a novel one-pot degradation of polyamide-6

This paper describes a novel strategy for the recycling of polyamide materials and their transformation into functional reactive oligomers with new properties. The method is illustrated by the heating of polyamide-6 (20,000 Da) in the presence of diesters of the phosphonic acid, (RO)₂P(O)H, where R could be -CH₃, -C₂H₅ or -C₆H₅. It is found that the reaction proceeds in several parallel processes: (i) phosphorylation of the amide group by the alkyl esters of the phosphonic acids and (ii) degradation of the main chain through an exchange reaction between the amide and phosphonic acid ester groups. Alternatively the depolymerization could be induced via a radical reaction with the participation of the polyamide moieties and the P-H group. The proceeding of the abovementioned reactions and the structure of the phosphorus-containing oligoamides are confirmed by ³¹P, ¹H and ¹³C NMR spectroscopy. Their molecular weights are determined by size exclusion chromatography.     

Synthesis of Block Copolymers Modified with Phosphonate Ester Groups Using Nitroxide‐Mediated Radical Polymerization

Summary: Phosphonate groups were introduced into block copolymers of styrene derivatives either as single end‐groups or as small blocks using nitroxide‐mediated radical polymerization. In order to combine the hydrophobic and hydrophilic segments, block copolymers with N,N‐dimethyl acrylamide were synthesized. After hydrolysis to phosphonic acid groups, adsorption of the polymer onto metal oxides was possible.

Conversion of the phosphonate groups by transesterification with trimethylbromosilane (TMBS), followed by hydrolysis of the silylester group.     

A new Horner-Wadsworth-Emmons type coupling reaction between nonstabilized beta-hydroxy phosphonates and aldehydes or ketones

Treatment of nonstabilized beta-hydroxy phosphonic acid mono methyl esters with diisopropyl carbodiimide at ambient temperature leads to clean stereospecific elimination. The phosphonic acid mono alkyl esters are accessible by the selective partial saponification of dimethyl or diethyl alkyl phosphonates with NaOH or MgBr(2). Isolated yields over both hydrolysis and elimination steps average 55-75%.     

Positive-ion fragmentation mechanisms of some organophosphorus esters

The mass spectra of the dimethyl and diethyl esters of phosphonic, phosphorochloridic and phosphorochloridothioic acid have been obtained, and the main paths of decomposition of their positiveions have been compared. Losses of formaldehyde occur from positive ions of all the methyl esters. Losses of C₂H₃˙ radicals occur consistently from the positive ions of the ethyl esters, but diethyl phosphorochloridothioate differs in showing a principal decomposition path involving initial loss of acetaldehyde. Other details are discussed.     

Synthesis of o-Carboranyl Containing Esters of Pentavalent Phosphorus Acids

Abstract

A new method for the synthesis of o-carboranyl containing phosphoric, phosphonic and phosphinic acid esters, where the o-carboranil group is in the ester group, has been developed. The propargyl esters of these acids were prapared in two ways: by the reaction of phosphorus acid salts with propargyl chlorid and by interaction of propargyl alcohol with acid chlorides in the presence of Et₃N. The propargyl esters have been converted into carboranyl containing compounds upon treatment with decaborane and dimethyl aniline     

Synthesis and antimicrobial activity of tris phosphonates

Syntheses of novel [{(3‐dialkoxy‐phosphoryl)‐(substituted‐phenyl‐methyl)‐2‐oxo‐2‐phenyl‐2,3‐dihydro‐2λ⁵–benzo [1,3,2] diazaphosphol‐1‐yl}‐(substituted‐phenyl)‐methyl]‐phosphonic acid diethyl/dimethyl esters ( 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j ) were conveniently accomplished by cyclocondensation of [(2‐{(dimethoxy‐phosphoryl)‐phenyl‐methyl)‐amino}‐phenyl amino)‐phenyl‐methyl]phosphonic acid diethyl/dimethyl esters ( 2a , 2b , 2c , 2d , 2e , 2f , 2g , 2h , 2i , 2j ) with phenyl phosphonic dichloride in dry toluene in the presence of triethylamine at 40°C. The title compounds were characterized by physicospectral techniques. All the synthesized compounds were found to possess antimicrobial properties. J. Heterocyclic Chem., 2011.     

Preparation of polymer electrolyte membranes based on poly(phenylene oxide) with different side chain lengths of phosphonic acid

A series of poly(phenylene oxide) (PPO) polymers bearing phosphonic acid groups on the methyl group and on the phenyl ring are synthesized as membrane materials for fuel cell applications. These phosphonic acid‐based PPO membranes exhibited high chemical resistance, dimensional stability, and good proton conductivity even under low humidity condition. Among the membranes, the one in which the phosphonic acid moiety is attached to the polymer main chain with ? CO(CH₂)₅? shows highest proton conductivity under overall conditions even though it has the lowest water uptake and IEC value. A well‐defined separation of the hydrophilic and hydrophobic phases suggests the phosphonic acid groups to form proton conduction channels via interchain hydrogen bonding. A high storage modulus of the membranes in various temperature ranges indicates that the membranes are suitable for use under a high temperature and low humidity conditions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Mass spectrometric characterization of telechelic prepolymers and addition polymers of DGEBA–aliphatic amines

Plasma desorption (PD) mass spectra of high molecular weight addition polymers of 2.2-bis-[4-(2.3-epoxypropoxy)phenyl]propane (DGEBA) and benzylamine show protonated molecular ions of the intact polymers and oligomer molecules. In the spectrum of a DGEBA/N,N′-dibenzyl-5-oxanonanediamine-1.9 addition polymer only fragments of the oligomers and a cyclic oligomer are observed. In both polymer spectra there is no indication for side reactions during the addition polymerization such as ether formation. Fast-atom bombardment (FAB) spectra of telechelic prepolymers having amino end groups show the regular oligomers with increasing degree of polymerization and the expected fragmentation products. Only prepolymers with epoxide end groups contain the regular prepolymers as well as side reaction products which are formed by reactions of the telechelics and DGEBA or by reaction of themselves. © 1996 John Wiley & Sons, Inc.     

Synthesis of new α-aminophosphonates containing sterically hindered phenol fragments based on the reaction of 3,5-di(tert-butyl)-4-oxo-2,5-cyclohexadienylidenemethylphosphonates with aliphatic amines

A reaction of aliphatic amines (n-butylamine, sec-butylamine, tert-butylamine, dodecylamine, 1,12-diaminododecane) with α-phosphorylated methylenequinones (dimethyl {[3,5-di-(tert-butyl)-4-oxo-2,5-cyclohexadienylidene]methyl}phosphonate and diphenyl {[3,5-di(tertbutyl)-4-oxo-2,5-cyclohexadienylidene]methyl}phosphonate)) to form 1,6-nucleophilic addition products was studied. This approach was used to obtain a-aminophosphonates containing sterically hindered phenol fragments in high yields.