Hybridization of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine) aggregates in dioxane/water solution

Self-assembly of binary blends of two triblock copolymers of poly(4-vinyl pyridine)-b-polystyrene-b-poly(4-vinyl pyridine), i.e., P4VP₄₃-b-PS₂₆₀-b-P4VP₄₃ (P1) and P4VP₄₃-b-PS₃₆₆-b-P4VP₄₃ (P2), in dioxane/water solution was studied. These two triblock copolymers individually tend to form vesicles (P2) and cylindrical micelles (P1) in dilute solution. It was found that copolymer components in the blend, sample preparation method, and annealing time had significant effect on hybridization aggregate morphology. By increasing P1 content in the copolymer blends, fraction of looped and stretched cylinders increased, while fraction of bilayers decreased. Nearly no bilayer was observed when P1 content was above 85 wt%. On the other hand, fraction of cylinders decreased while fraction of bilayers increased with the increase of P2 content in copolymer blends. Lamellar structures were obtained, when P2 content was 60 wt% in the copolymer blends, whereas cylinders were seldom found when P2 content was above 80 wt%. These results indicate that P1 and P2 copolymer molecules cooperatively participate in the formation of cylinders and vesicles. Some exotic structures, such as lamellae with protruding cylinders (LPC), incomplete vesicles with protruding cylinders (VPC), and cylindrical bilayers, have been kinetically trapped. These structures may result from intramicellar fusion processes in cylindrical micelles. The striking structures represent a compromise between bilayer and cylindrical geometries.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

SAXS/WAXS/DSC studies on crystallization of a polystyrene-b-poly(ethylene oxide)-b-polystyrene triblock copolymer with lamellar morphology and low glass transition temperature

Crystallization of a polystyrene-b-poly(ethylene oxide)-b-polystyrene (S-EO-S) triblock copolymer, S₄₀EO₁₃₆S₄₀, with lamellar morphology in the melt and low glass transition temperature (T_g=47 °C) of the S block was studied. The triblock copolymer was cooled from ordered melt and isothermal crystallization was conducted at crystallization temperatures (T_c) near the T_g of the S block. It is found that crystallization behavior of S₄₀EO₁₃₆S₄₀ strongly depends on T_c. When T_c is far below T_g, an Avrami exponent n=0.5 is observed, which is attributed to diffusion-controlled confined crystallization. As T_c slightly increases, the Avrami exponent is 1.0, indicating that crystallization is confined and crystallization rate is determined by the rate of homogeneous nucleation. When T_c is just below the T_g of the S block, crystallization tends to become breakout and accordingly Avrami exponent changes from 1.0 to 3.2. Crystallinity and melting temperature of the EO block in breakout crystallization are slightly higher than those in confined crystallization. Time-resolved small and wide angle X-ray scattering (SAXS/WAXS) were used to monitor isothermal crystallization of S₄₀EO₁₃₆S₄₀. It shows that the long period is constant in confined crystallization, but it gradually increases during breakout crystallization. WAXS result reveals that confined or breakout crystallization has no effect on the crystal structure of the EO block.     

Synthesis of poly(vinyl acetate)-b-poly(dimethylsiloxane)-b-poly(vinyl acetate) triblock copolymers by iodine transfer polymerization

Iodine transfer polymerization of vinyl acetate in bulk, initiated by α,α′-azobisisobutyronitrile at 80 °C, has been successfully performed in the presence of an α,ω-diiodo-poly(dimethylsiloxane) macrotransfer agent. The formation of a triblock copolymer PVAc-b-PDMS-b-PVAc has been proved by ¹H NMR and size exclusion chromatography analyses. The analysis of the chain-ends has been performed using ¹H NMR. It was found that a large amount of inverse chain-ends is present at the end of the polymerization. Moreover, the formation of several other side products by degradation of the functional chain-ends has been evidenced.     

聚苯乙烯-b-聚氧乙烯-b-聚苯乙烯三嵌段共聚物的自组装

小分子表面活性剂、磷脂、接枝及嵌段共聚物等两亲分子在选择性介质中能够自组装形成特定的分子聚集体 [1,2 ] .嵌段共聚物自组装的某些行为具有生物膜模拟性 ,如最近发现的嵌段共聚物自组装囊泡 [3～ 5] .诸多因素影响着嵌段共聚物在稀溶液中的自组装行为 [6] .对于 ABA型三嵌     

Preparation of organic/inorganic hybrid nanomaterials using aggregates of poly(stearyl methacrylate)-b-poly(3-(trimethoxysilyl) propyl methacrylate) as precursor

A novel brush-type amphiphilic copolymer of PSMA-b-PTMSPMA was synthesized via ATRP technique. As-synthesized polymer was characterized by GPC and ¹H NMR. It was of interest that the resultant polymer could self-assemble into micelles with different morphologies and sizes in selective solvents by adjusting the copolymer concentrations. These aggregates could be prepared into novel stable organic/inorganic hybrid nanomaterials by the gelation process. The size and structure of these aggregates and the corresponding hybrid nanomaterials were observed by TEM.     

Micellization of triblock copoly(ethyleneoxide/tetrahydrofuran/ ethylene oxide)

 The association behaviour of triblock copoly(ethylene oxide/tetrahydrofuran/ethylene oxide), in particular E₁₀₀T₂₇E₁₀₀, in aqueous solutions has been investigated by means of static and dynamic light scattering, nuclear magnetic reso-nance (NMR) and surface tension techniques. On raising the polymer concentration at room temperature, the copolymer aggregates to form micelles with an aggregation number of about 105 (R _G, mic≈15 nm and R _H, mic≈13 nm, as revealed by light scattering and FT-PGSE NMR measurements, respectively). The micelles are kinetically quite stable, the micellar lifetime is shown to be more than 1 h. The residence time of a single unimer in a micelle is more than 140 ms. The apparent radius of gyration R _G, mic is fairly independent of concentration, but large effects are observed on varying the temperature. Raising the temperature initially results in an increase of the apparent micellar size, followed by a maximum at an intermediate temperature (≈45 °C). At higher temperatures a contraction of the micelles is observed. The shape of the micelles also appear to vary in this temperature interval. The interactions responsible for these phenomena are discussed in terms of, e.g., the temperature-dependent solubility of the alkylene oxide segments in water and polydispersity effects. Received: 29 January 1996 acccepted : 4 November 1996     

Micellar characteristics of diblock polyacrylate-polyethylene oxide copolymers in aqueous media

The formation and structural features of micelles from low molecular weight diblock copolymers of poly(methylmethacrylate-b-ethylene oxide) PMMA-PEO (varying in total molecular weight) and poly(butylmethacrylate-b-ethylene oxide) PBMA-PEO in water, aqueous NaCl and urea solutions were examined by surface tension, dye spectral, cloud point, viscosity and small angle neutron scattering (SANS) measurements. The increasing concentrations of NaCl reduce the onset concentration of micellization and phase separation, while urea has reverse effect. The analysis of the SANS curves revealed the presence of prolate ellipsoidal micelles in diblock copolymers at various experimental concentrations and temperatures studied. The effect of temperature, NaCl and urea on the neutron scattering profiles are more or less the same which is well supported by viscosity and surface tension measurements. The diblock copolymers form spherical micelles of aggregation number in the range of 522-664. The micelles are very temperature stable.     

ATRP of 3-(triethoxysilyl)propyl methacrylate and preparation of “stable” gelable block copolymers

ATRP of a gelable monomer, 3-(triethoxysilyl)propyl methacrylate (TESPMA), mediated by CuBr/N,N,N’,N’’,N”-pentamethyldiethylenetriamine (PMDETA) using ethyl 2-bromoisobutyrate (2-EBiB) as initiator was studied. The results indicate that polymerization follows the first-order kinetic. PolyTESPMA (PTESPMA) is much more stable to moisture which is important for exploring the properties of its block copolymer. A series of PEO-b-PTESPMA block copolymers with different composition were prepared. Self-assembly of PEO-b-PTESPMA has also been explored in a mixture of methanol and water and polymeric vesicles have been obtained. By introducing the gelation catalyst, the block copolymer vesicles can be stabilized by the silica networks.     

Phase behavior of biodegradable amphiphilic poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide)

This study describes the miscibility phase behavior in two series of biodegradable triblock copolymers, poly(l-lactide)-block-poly(ethylene glycol)-block-poly(l-lactide) (PLLA-PEG-PLLA), prepared from two di-hydroxy-terminated PEG prepolymers (M_n = 4000 or 600 g mol⁻¹) with different lengths of poly(l-lactide) segments (polymerization degree, DP = 1.2-145.6). The prepared block copolymers presented wide range of molecular weights (800-25,000 g mol⁻¹) and compositions (16-80 wt.% of PEG). The copolymer multiphases coexistance and interaction were evaluated by DSC and TGA. The copolymers presented a dual stage thermal degradation and decreased thermal stability compared to PEG homopolymers. In addition, DSC analyses allowed the observation of multiphase separation; the melting temperature, T_m, of PLLA and PEG phases depended on the relative segment lengths and the only observed glass transition temperature (T_g) in copolymers indicated miscibility in the amorphous phase.     

Crystallization and melting behaviors of polystyrene-b-poly(ethylene-co-butene) block copolymers

Non-isothermal and isothermal crystallization behaviors of polystyrene-b-poly(ethylene-co-butene) (PSt-b-PEB) block copolymers with different compositions and chain lengths were investigated by differential scanning calorimetry (DSC). The results show that crystallization of PEB block is strongly dependent on the composition. Crystallization temperature (T_c), melting temperature (T_m) and fusion enthalpy (ΔH_f) increase rapidly with PEB volume fraction (V_E) for block copolymers with V_E below 50%, but there is little change when PEB block becomes the major component. Glass transition temperature (T_g) of the PSt block and order-disorder transition temperature (T_ODT) of block copolymers also have a weak effect. The isothermal crystallization kinetics results show that Avrami exponent (n) was strongly dependent on the composition and crystallization temperature. For the block copolymers with V_E below 38.7 vol%, the values of n vary between 0.9 and 1.3, indicating that crystallization is confined. For the PSt-b-PEB block copolymers with V_E higher than 50%, fractionated crystallization behavior is usually observed. A two-step isothermal crystallization procedure is applied to these block copolymers. It is found that breakout crystallization occurs at higher T_c, but confined at lower T_c. Two overlapped melting peaks are observed for the block copolymers with fractionated crystallization behavior after two-step crystallization, and only the higher melting peak corresponding to breakout crystallization can be used to derive equilibrium melting temperature.     

Multiple morphological micelles formed from the self-assembly of poly(styrene)-b-poly(4-vinylpyridine) containing cobalt dodecyl benzene sulfonate

A series of supramolecular block copolymers were prepared using poly(styrene)-b-poly(4-vinylpyridine)(PS-b-P4VP) which coordinated with cobalt dodecyl benzene sulfonate (Co(DBS)₂) in tetrahydrofuran (THF). Fourier transformation infrared spectroscopy (FTIR), UV-vis absorption spectroscopy (UV) and differential scanning calorimetry (DSC) showed that Co(DBS)₂ coordinated to the lone electron pairs of the pyridine nitrogens in the P4VP block and leaded to complexes. The supramolecular block copolymers could self-assemble into nanosized micelles with different shapes and dimensions in THF, depending on the number of Co(DBS)₂ groups per 4-vinylpyridine (repeat unit was denoted by n) and the ratio between PS block length and P4VP block length. Transmission electron microscopy (TEM) results showed that when the number of repeat units of P4VP was more than that of PS, micelles with different interesting shapes such as spheres, rods, vesicles, large compound vesicles (LCVs) and the large compound micelles (LCMs) were observed if increasing the content of the Co(DBS)₂ in PS-b-P4VP copolymer/THF solution; When the number of repeat units of P4VP was less than that of PS, the micelle morphologies changed from spheres to rods, bi-layer, and LCMs if the Co(DBS)₂ content was increased progressively.     

Novel organic/inorganic hybrid self-assembly aggregates of ferrocene-poly(styrene)-b-poly[3-(trimethyoxysilyl)propyl methacrylate]

Ferrocene-poly(styrene)-b-poly[3-(trimethyoxysilyl)propyl methacrylate] (Fc-PS₂₁₂-PTMSPMA₁₂) was synthesized via atom transfer radical polymerization (ATRP) and characterized. The self-assembly of the resultant polymer was investigated. The organic/inorganic hybrid nanoparticles from self-assembly aggregates of Fc-PS₂₁₂-PTMSPMA₁₂ including spheres, vesicles, and large compound vesicles (LCVs) were obtained and the morphologies were fixed by a gelation process.     

Advanced analytical methods for the structure elucidation of polystyrene-b-poly(n-butyl acrylate) block copolymers prepared by reverse iodine transfer polymerisation

Reverse iodine transfer polymerisation (RITP) is a living radical polymerisation technique that has shown to be feasible in synthesising segmented styrene-acrylate copolymers. Polymers synthesised via RITP are typically only described regarding their bulk properties using nuclear magnetic resonance spectroscopy and size exclusion chromatography. To fully understand the complex composition of the polymerisation products and the RITP reaction mechanism, however, it is necessary to use a combination of advanced analytical methods. In the present RITP procedure, polystyrene was synthesised first and then used as a macroinitiator to synthesise polystyrene-block-poly(n-butyl acrylate) (PS-b-PBA) block copolymers. For the first time, these PS-b-PBA block copolymers were analysed by a combination of SEC, in situ¹H NMR and HPLC. ¹H NMR was used to determine the copolymer composition and the end group functionality of the samples, while SEC and HPLC were used to confirm the formation of block copolymers. Detailed information on the living character of the RITP process was obtained.     

Controlled/“living” atom transfer radical polymerization of methyl methacrylate in the synthesis of triblock copolymers from a poly(oxyethylene) macroinitiator

Atom transfer radical polymerization of methyl methacrylate initiated by a poly(oxyethylene) macroinitiator by the esterification of PEG 1500 with 2-chloro propionyl chloride was synthesized. These polymerization proceeds both in bulk and solution with a quantitative initiation efficiency, leading to A-B-A triblock copolymers. The macroinitiators and their block copolymers were characterized by FT-IR, FT-NMR and GPC analyses. In bulk polymerization, the kinetic study showed that the relationship between ln[M]₀/[M] vs time was linear showing that there is a constant concentration of active species throughout the polymerization and follow the first order kinetics with respect to monomer. Moreover, the experimental molecular weight of the block copolymers increased linearly with the monomer conversion and the polydispersity index remained between 1.3 and 1.5 throughout the polymerization. No formation of homo poly(methyl methacrylate) could also be detected, and all this confirms that the bulk polymerization proceeds in a controlled/“living” manner.     

Self-assembling of biocompatible BAB amphiphilic triblock copolymers PLL(Z)-PEG-PLL(Z) in aqueous medium

A novel biocompatible BAB amphiphilic triblock copolymers which consist of poly(ethylene glycol) (PEG) and poly(ε-benzyloxycarbonyl l-Lysine) (PLL(Z)) were synthesized by anion ring opening polymerization of N-carboxyanhydride of ε-benzyloxycarbonyl-l-Lysine (l-Lys(z)-NCA) using α-amino-ω-amino-poly(ethylene glycol) as initiator in DMF. The block copolymers were characterized by IR, ¹H-NMR, GPC, DSC. The results showed that the block copolymers were of narrow molecular distribution and well defined structure. The self-assembled behaviors of block copolymers in aqueous medium were investigated. The effects of various factors, such as cosolvents, initial concentration, temperature, annealing time and times of frozen-thaw cycle etc., on the aggregate morphologies were investigated by transmission electron microscopy (TEM). Different morphological aggregates such as sphere, rod and vesicle etc. could be obtained at controlled conditions, at the same time, a novel helical aggregate was observed. These regular nanometer structures have potential applications in biomedicine due to the biocompatibility of two blocks.     

Effect of phenol on the aggregation characteristics of an ethylene oxide-propylene oxide triblock copolymer P65 in aqueous solution

The effects of phenol on the micellization, micellar growth, and phase separation of a poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-PPO-PEO) amphiphilic copolymer (Pluronic P65: EO19 PO30 EO19) in aqueous solution have been studied by cloud point, viscosity, dynamic light scattering (DLS), differential scanning calorimetry (DSC), fluorescence spectroscopy, and small-angle neutron scattering (SANS). Various concentrations of P65 have been chosen to estimate the effect of phenol on different concentration regions of P65. Phenol interacts quite differently at low concentrations (0-2%) than at high concentrations (2-10%) of P65, as per the observation that phenol is more predominant at smaller concentrations of P65. A marked decrease in the cloud points of the P65 solutions is observed in presence of phenol. The critical micelle temperature (CMT) of P65 shows a synergistic effect of phenol on P65 aggregates. Micellar transitions, phase separation, and aggregation behaviours like micellization and micellar growth in the presence of phenol have been observed by combining viscometry, DLS, DSC, and CP. DLS shows that the effect of phenol is predominant at high temperatures. SANS shows a high increase in axial ratio and aggregation numbers in the presence of phenol at fixed concentrations of P65. Fluorescence data illustrate that addition of phenol makes micelles polar but at the same time its favours aggregation. Water-soluble phenol (present in low concentrations) forms aggregates with P65, which can be separated by cloud point extraction, making this study interesting for separation of phenol from the phenol-water system.     

Synthesis and crystallization behaviors of poly(styrene-b-isoprene-b-ε-caprolactone) triblock copolymers

The triblock copolymers, poly(styrene-b-isoprene-b-ε-caprolactone)s (PS-b-PI-b-PCL) have been synthesized successfully by combination of anionic polymerization and ring-opening polymerization. Diblock copolymer capped with hydroxyl group, PS-b-PI-OH was synthesized by sequential anionic polymerization of styrene and isoprene and following end-capping reaction of EO, and then it was used as macro initiator in the ring-opening polymerization of CL. The results of DSC and WAXD show big effect of amorphous PS-b-PI on the thermal behaviors of PCL block in the triblock copolymers and the lower degree of crystalline in the triblock copolymer with higher molecular weight of PS-b-PI was observed. The real-time observation on the polarized optical microscopy shows the spherulite growth rates of PCL₂₇, PCL₃₂₈ and PS-b-PI-b-PCL₃₄₄ are 0.71, 0.46 and 0.07 μm s⁻¹, respectively. The atomic force microscopy (AFM) images of the PS₉₀-b-PI₆₆-b-PCL₂₈ show the columns morphology formed by it’s self-assembling.