Ruthenium- and rhodium-catalyzed direct carbonylation of the ortho C-H bond in the benzene ring of N-arylpyrazoles

The direct carbonylation of C-H bonds in the benzene ring of N-phenylpyrazoles via catalysis by ruthenium or rhodium complexes is described. The reaction of N-phenylpyrazoles with carbon monoxide and ethylene in the presence of Ru(3)(CO)(12) or Rh(4)(CO)(12) resulted in the site-selective carbonylation of the ortho C-H bonds in the benzene ring to give the corresponding ethyl ketones. A variety of functional groups on the benzene ring can be tolerated. N-Phenylpyrazoles have higher reactivities than would be expected, based on the pK(a) values of the conjugate acid of pyrazole. The choice of solvent for this reaction is significant, and N, N-dimethylacetamide (DMA) gives the best result.     

Scope and mechanistic study of the ruthenium-catalyzed ortho-C-H bond activation and cyclization reactions of arylamines with terminal alkynes

The cationic ruthenium hydride complex [(PCy(3))(2)(CO)(CH(3)CN)(2)RuH](+)BF(4)(-) was found to be a highly effective catalyst for the C-H bond activation reaction of arylamines and terminal alkynes. The regioselective catalytic synthesis of substituted quinoline and quinoxaline derivatives was achieved from the ortho-C-H bond activation reaction of arylamines and terminal alkynes by using the catalyst Ru(3)(CO)(12)/HBF(4).OEt(2). The normal isotope effect (k(CH)/k(CD) = 2.5) was observed for the reaction of C(6)H(5)NH(2) and C(6)D(5)NH(2) with propyne. A highly negative Hammett value (rho = -4.4) was obtained from the correlation of the relative rates from a series of meta-substituted anilines, m-XC(6)H(4)NH(2), with sigma(p) in the presence of Ru(3)(CO)(12)/HBF(4).OEt(2) (3 mol % Ru, 1:3 molar ratio). The deuterium labeling studies from the reactions of both indoline and acyclic arylamines with DCCPh showed that the alkyne C-H bond activation step is reversible. The crossover experiment from the reaction of 1-(2-amino-1-phenyl)pyrrole with DCCPh and HCCC(6)H(4)-p-OMe led to preferential deuterium incorporation to the phenyl-substituted quinoline product. A mechanism involving rate-determining ortho-C-H bond activation and intramolecular C-N bond formation steps via an unsaturated cationic ruthenium acetylide complex has been proposed.     

Ru3(CO)12-catalyzed silylation of benzylic C-H bonds in arylpyridines and arylpyrazoles with hydrosilanes via C-H bond cleavage

Ruthenium-catalyzed silylation of sp3 C-H bonds at a benzylic position with hydrosilanes gave benzylsilanes. For this silylation reaction, Ru3(CO)12 complex showed high catalytic activity. This silylation proceeded at the methyl C-H bond selectively. For this silylation reaction, pyridyl and pyrazolyl groups, and the imino group in hydrazones, can function as a directing group. Several hydrosilanes involving triethyl-, dimethylphenyl-, tert-butyldimethyl-, and triphenylsilanes can be used as a silylating reagent. Coordination of an sp2 nitrogen atom to the ruthenium complex is important for achieving this silylation reaction.     

Activation of two C-H bonds of NHC N-methyl groups on triosmium and triruthenium carbonyl clusters

The thermolysis of the NHC triosmium cluster [Os3(Me2Im)(CO)11] (1a; Me2Im = 1,3-dimethylimidazol-2-ylidene) in toluene at reflux temperature sequentially affords the edge-bridged cluster [Os3(micro-H)(micro-kappa2-MeImCH2)(CO)10] () and the face-capped derivative [Os3(micro-H)2(micro3-kappa2-MeImCH)(CO)9] (3a). These products result from the sequential oxidative addition of one (2a) and two (3a) N-methyl C-H bonds of the original NHC ligand. The related face-capped triruthenium cluster [Ru3(micro-H)2(micro3-kappa2-MeImCH)(CO)9] (3b) has been prepared by heating the NHC triruthenium cluster [Ru3(Me2Im)(CO)11] (1b) in THF at reflux temperature. In this case, the pentanuclear derivatives [Ru5(Me2Im)(micro4-kappa2-CO)(CO)14] (4b) and [Ru5(Me2Im)2(micro4-kappa2-CO)(CO)13] (5b) are minor reaction products, but a ruthenium cluster analogous to has not been obtained. The face-capped oxazole-derived NHC triruthenium cluster [Ru3(micro-H)2(micro3-kappa2-OxCH)(CO)9] (3c; MeOx = N-methyloxazol-2-ylidene) is the only isolated product of the thermolysis of [Ru3(MeOx)(CO)11] (1c) in THF at reflux temperature.     

Lewis acid-base interactions between metal atoms and their applications for the synthesis of bimetallic cluster complexes

A series of new palladium-ruthenium cluster complexes have been prepared by adding Pd(PBu(t)(3)) fragments to the ruthenium-ruthenium bonds of ruthenium carbonyl complexes. Reaction of Pd(PBu(t)(3))(2) with Ru(3)(CO)(12) yielded the tripalladium adduct Ru(3)(CO)(12)[Pd(PBu(t)(3))](3) 1. Compound 1 contains three Pd(PBu(t)(3)) groups symmetrically disposed with each one acting as a bridge across one Ru-Ru bond of the former Ru(3)(CO)(12) molecule. Reaction of Pd(PBu(t)(3))(2) with Ru(6)(CO)(17)(C) yielded the dipalladium adduct Ru(6)(CO)(17)(C)[Pd(PBu(t)(3))](2) 2. Compound 2 exists as two isomers in the solid state. One isomer has Pd(PBu(t)(3)) groups bridging two edges of the Ru(6) octahedron. The other isomer has a Pd(PBu(t)(3)) group bridging one edge of the Ru(6) octahedron, and the other is a triple bridge. The reaction of Pd(PBu(t)(3))(2) with Ru(CO)(5) yielded the dipalladium-diruthenium complex Ru(2)(CO)(9)[Pd(PBu(t)(3))](2) 3, a dipalladium adduct of the unstable molecule Ru(2)(CO)(9).     

Ruthenium-cluster-mediated activation of all bonds of a methyl group of 6,6'-dimethyl-2,2'-bipyridine and 2,9-dimethyl-1,10-phenanthroline: transformation of the latter into a 2-alkenyl-9-methyl-1,10-phenanthroline ligand

The treatment of [Ru3(CO)12] with 6,6'-dimethyl-2,2'-bipyridine (Me2bipy) or 2,9-dimethyl-1,10-phenanthroline (Me2phen) in THF at reflux temperature gives the trinuclear dihydride complexes [Ru3(mu-H)2(mu3-L1)(CO)8] (L1 = HCbipyMe 1 a, HCphenMe 1 b), which result from the activation of two C-H bonds of a methyl group. The hexa-, hepta-, and pentanuclear derivatives [Ru6(mu3-H)(mu5-L2)(mu-CO)3(CO)13] (L2 = CbipyMe 2 a, CphenMe 2 b), [Ru7(mu3-H)(mu5-L2)(mu-CO)2(CO)16] (L2 = CbipyMe 3 a, CphenMe 3 b), and [Ru5(mu-H)(mu5-C)(mu-L3)(CO)13] (L3 = bipyMe 4 a, phenMe 4 b) can also be obtained by treating 1 a and 1 b with [Ru3(CO)12]. Compounds 2 a and 2 b have a basal edge-bridged square-pyramidal metallic skeleton with a carbyne-type C atom capping the four Ru atoms of the pyramid base. The structures of 3 a and 3 b are similar to those of 2 a and 2 b, respectively, but an additional Ru atom now caps a triangular face of the square-pyramidal fragment of the metallic skeleton. The most interesting feature of 2 a, 2 b, 3 a, and 3 b is that their carbyne-type C atoms were originally bound to three hydrogen atoms in Me2bipy or Me2phen and, therefore, they arise from the unprecedented activation of all three C-H bonds of C-bound methyl groups. The pentanuclear compounds 4 a and 4 b contain a carbide ligand surrounded by five Ru atoms in a distorted trigonal-bipyramidal environment. They are the products of a series of processes that includes the activation of all bonds (three C-H and one C-C) of organic methyl groups, and are the first examples of complexes having carbide ligands that arise from C-bonded methyl groups. The alkenyl derivatives [Ru5(mu5-C)(mu-p-MeC6H4CHCHphenMe)(CO)13] (5 b), [Ru5(mu-H)(mu5-C)(mu-p-MeC6H4CHCHphenMe)(p-tolC2)(CO)12] (6 b), and [Ru5(mu-H)(mu5-C)(mu-PhCHCHphenMe)(PhC2)(CO)12] (7 b) have been obtained by treating 4 b with p-tolyl- and phenylacetylene, respectively. Their heterocyclic ligands contain an alkenyl fragment in the position that was originally occupied by a methyl group. Therefore, these complexes are the result of the formal substitution of an alkenyl group for a methyl group of 2,9-dimethyl-1,10- phenanthroline.     

Formation of a ruthenium(IV)-oxo complex by electron-transfer oxidation of a coordinatively saturated ruthenium(II) complex and detection of oxygen-rebound intermediates in C-H bond oxygenation

A coordinatively saturated ruthenium(II) complex having tetradentate tris(2-pyridylmethyl)amine (TPA) and bidentate 2,2'-bipyridine (bpy), [Ru(TPA)(bpy)](2+) (1), was oxidized by a Ce(IV) ion in H(2)O to afford a Ru(IV)-oxo complex, [Ru(O)(H(+)TPA)(bpy)](3+) (2). The crystal structure of the Ru(IV)-oxo complex 2 was determined by X-ray crystallography. In 2, the TPA ligand partially dissociates to be in a facial tridentate fashion and the uncoordinated pyridine moiety is protonated. The spin state of 2, which showed paramagnetically shifted NMR signals in the range of 60 to -20 ppm, was determined to be an intermediate spin (S = 1) by the Evans' method with (1)H NMR spectroscopy in acetone-d(6). The reaction of 2 with various oraganic substrates in acetonitrile at room temperature afforded oxidized and oxygenated products and a solvent-bound complex, [Ru(H(+)TPA)(bpy)(CH(3)CN)], which is intact in the presence of alcohols. The oxygenation reaction of saturated C-H bonds with 2 proceeds by two-step processes: the hydrogen abstraction with 2, followed by the dissociation of the alcohol products from the oxygen-rebound complexes, Ru(III)-alkoxo complexes, which were successfully detected by ESI-MS spectrometry. The kinetic isotope effects in the first step for the reaction of dihydroanthrathene (DHA) and cumene with 2 were determined to be 49 and 12, respectively. The second-order rate constants of C-H oxygenation in the first step exhibited a linear correlation with bond dissociation energies of the C-H bond cleavage.     

Reactivity of diaminogermylenes with ruthenium carbonyl: Ru3Ge3 and RuGe2 derivatives

The nature of the products of the reactions of [Ru(3)(CO)(12)] with diaminogermylenes depends upon the volume and the cyclic or acyclic structure of the latter. Thus, the triruthenium cluster [Ru(3){μ-Ge(NCH(2)CMe(3))(2)C(6)H(4)}(3)(CO)(9)], which has a planar Ru(3)Ge(3) core and an overall C(3h) symmetry, has been prepared in quantitative yield by treating [Ru(3)(CO)(12)] with an excess of the cyclic 1,3-bis(neo-pentyl)-2-germabenzimidazol-2-ylidene in toluene at 100 °C, but under analogous reaction conditions, the acyclic and bulkier Ge(HMDS)(2) (HMDS = N(SiMe(3))(2)) quantitatively leads to the mononuclear ruthenium(0) derivative [Ru{Ge(HMDS)(2)}(2)(CO)(3)]. Mixtures of products have been obtained from the reactions of [Ru(3)(CO)(12)] with the cyclic and very bulky 1,3-bis(tert-butyl)-2-germaimidazol-2-ylidene under various reaction conditions. The Ru(3)Ge(3) and RuGe(2) products reported in this paper are the first ruthenium complexes containing diaminogermylene ligands.     

Ruthenium-catalyzed C-H/CO/Olefin coupling reaction of N-arylpyrazoles. Extraordinary reactivity of N-arylpyrazoles toward carbonylation at C-H bonds

The reaction of 1-arylpyrazoles with CO and ethylene in the presence of Ru(3)(CO)(12) resulted in regioselective carbonylation at the ortho C-H bonds. While it is found that the pyrazole ring also functions as the directing group for C-H bond cleavage, the efficiency of the reaction depends on the position of the pyrazole ring.     

Reactions of 2-indolylphosphines with Ru3(CO)12: cluster capping with mu 3,eta 2-indolylphosphine as an anionic six-electron P,N-donor ligand

Stepwise bidentate coordination of the novel indolylphosphine ligands HL (1, HL = P(C(6)H(5))(2)(C(9)H(8)N)(diphenyl-2-(3-methylindolyl)phosphine); 2, HL = P(C(6)H(5))(C(9)H(8)N)(2)(phenyldi-2-(3-methylindolyl)phosphine); and 3, HL = P(C(6)H(5))(C(17)H(12)N(2))(di(1H-3-indolyl)methane-(2,12)-phenylphosphine)) to the ruthenium cluster Ru(3)(CO)(12) is demonstrated. Reactions of 1-3 with Ru(3)(CO)(12) led to the formation of Ru(3)(CO)(11)(HL) (4-6), in which HL is mono-coordinated through the phosphorus atom. The X-ray structures of 4-6 show that the phosphorus atom is equatorially coordinated to the triruthenium core. In all cases, gentle heating of Ru(3)(CO)(11)(HL) resulted in the formation of Ru(3)(CO)(9)(mu-H)(mu(3),eta(2)-L)(7-9) in which the NH proton of the indolyl substituent had migrated to the ruthenium core to form a bridging hydride ligand. The X-ray structure of Ru(3)(CO)(9)(mu-H)[mu(3),eta(2)-P(C(6)H(5))(2)(C(9)H(7)N)] (7) shows the deprotonated nitrogen atom of the indolyl moiety bridging over the face of the triruthenium core, bonding to the two ruthenium metal centers to which the phosphorus atom is not bound. The phosphorus atom is forced to adopt an axial bonding mode due to the geometry of the indolylphosphine ligand. Cluster electron counting and X-ray data suggest that the indolylphosphine behaves as a six-electron ligand in this mode of coordination. Compounds 4-9 have been characterized by IR, (1)H, (13)C and (31)P NMR spectroscopy.     

Catalytic addition of C-H bonds to multiple bonds with the aid of ruthenium complexes

Ruthenium complexes, e.g., RuH2(CO)(PPh3)3, have been found to catalyze the direct addition of ortho carbon-hydrogen bonds of aromatic ketones to olefins and acetylenes with high efficiency and selectivity. The C-H/olefin coupling reaction is applicable to not only C-H bonds in aromatic ketones but also to those in a,b-enones and aro-matic esters. Catalytic addition of ortho carbon-hydrogen bonds of aromatic imines to olefins is found to be catalyzed by Ru3(CO)12.     

Room-temperature regioselective C-H/olefin coupling of aromatic ketones using an activated ruthenium catalyst with a carbonyl ligand and structural elucidation of key intermediates

Mechanistic studies of the ruthenium-catalyzed reaction of aromatic ketones with olefins are presented. Treatment of the original catalyst, RuH(2)(CO)(PPh(3))(3), with trimethylvinylsilane at 90 °C for 1-1.5 h afforded an activated ruthenium catalyst, Ru(o-C(6)H(4)PPh(2))(H)(CO)(PPh(3))(2), as a mixture of four geometric isomers. The activated complex showed high catalytic activity for C-H/olefin coupling, and the reaction of 2'-methylacetophenone with trimethylvinylsilane at room temperature for 48 h gave the corresponding ortho-alkylation product in 99% isolated yield. The activated catalyst was thermally robust and showed excellent catalytic activity under refluxing toluene conditions. (1)H and (31)P NMR studies of the C-H/olefin coupling at room temperature suggested that an ortho-ruthenated complex, P,P'-cis-C,H-cis-Ru(2'-(6'-MeC(6)H(4)C(O)Me))(H)(CO)(PPh(3))(2), participated in the reaction as a key intermediate. Isotope labeling studies using acetophenone-d(5) indicated that the rate-limiting step was the C-C bond formation, not the C-H bond cleavage, and that each step prior to the reductive elimination was reversible. The rate of C-H/olefin coupling was found to exhibit pseudo first-order kinetics and to show first-order dependence on the ruthenium complex concentration.     

Acylation of five-membered N-heteroaromatic compounds by ruthenium carbonyl-catalyzed direct carbonylation at a C-H bond

The ruthenium-catalyzed carbonylation at the C-H bond of five-membered N-heteroaromatic compounds is described. The reaction of imidazoles with CO and olefins in toluene in the presence of a catalytic amount of Ru(3)(CO)(12) results in carbonylation of the C-H bond at the 4-position (adjacent to the sp(2)-nitrogen) of the imidazole ring to give acylated imidazoles in good to high yields. A wide range of olefins can be utilized in the carbonylation reaction, and a variety of functional groups are compatible under the reaction conditions. Other five-membered N-heteroaromatic compounds, such as pyrazoles, oxazoles, and thiazoles, can also be used for the carbonylation reaction, and in all cases, carbonylation takes place exclusively at a C-H bond alpha to the sp(2) nitrogen. The reactivity of the five-membered heterocycles corresponds to the pK(a) of the conjugate acid of these heterocycles. The higher the pK(a) of the substrate, the higher is the reactivity. This indicates that the pK(a) values are related to the ability of the nitrogen atom in the substrates to coordinate to a ruthenium center. The coordination of the substrates to the ruthenium center in the catalyst complex is a necessary prerequisite for the carbonylation to proceed.     

Metalloporphyrin-mediated asymmetric nitrogen-atom transfer to hydrocarbons: aziridination of alkenes and amidation of saturated C-H bonds catalyzed by chiral ruthenium and manganese porphyrins

Chiral metalloporphyrins [Mn(Por*)(OH)(MeOH)] (1) and [Ru(Por*)(CO)(EtOH)] (2) catalyze asymmetric aziridination of aromatic alkenes and asymmetric amidation of benzylic hydrocarbons to give moderate enantiomeric excesses. The mass balance in these nitrogen-atom-transfer processes has been examined. With PhI=NTs as the nitrogen source, the aziridination of styrenes, trans-stilbene, 2-vinylnaphthalene, indene, and 2,2-dimethylchromene catalyzed by complex 1 or 2 resulted in up to 99 % substrate conversions and up to 94 % aziridine selectivities, whereas the amidation of ethylbenzenes, indan, tetralin, 1-, and 2-ethylnaphthalene catalyzed by complex 2 led to substrate conversions of up to 32 % and amide selectivities of up to 91 %. Complex 1 or 2 can also catalyze the asymmetric amidation of 4-methoxyethylbenzene, tetralin, and 2-ethylnaphthalene with "PhI(OAc)(2) + NH(2)SO(2)Me", affording the N-substituted methanesulfonamides in up to 56 % ee with substrate conversions of up to 34 % and amide selectivities of up to 92 %. Extension of the "complex 1 + PhI=NTs" or "complex 1 + PhI(OAc)(2) + NH(2)R (R=Ts, Ns)" amidation protocol to a steroid resulted in diastereoselective amidation of cholesteryl acetate at the allylic C-H bonds at C-7 with substrate conversions of up to 49 % and amide selectivities of up to 90 % (alpha:beta ratio: up to 4.2:1). An aziridination- and amidation-active chiral bis(tosylimido)ruthenium(VI) porphyrin, [Ru(Por*)(NTs)(2)] (3), and a ruthenium porphyrin aziridine adduct, [Ru(Por*)(CO)(TsAz)] (4, TsAz=N-tosyl-2- (4-chlorophenyl)aziridine), have been isolated from the reaction of 2 with PhI=NTs and N-tosyl-2-(4-chlorophenyl)aziridine, respectively. The imidoruthenium porphyrin 3 could be an active species in the aziridination or amidation catalyzed by complex 2 described above. The second-order rate constants for the reactions of 3 with styrenes, 2-vinylnaphthalene, indene, ethylbenzenes, and 2-ethylnaphthalene range from 3.7-42.5x10(-3) dm(3) mol(-1) s(-1). An X-ray structure determination of complex 4 reveals an O- rather than N-coordination of the aziridine axial ligand. The fact that the N-tosylaziridine in 4 does not adopt an N-coordination mode disfavors a concerted pathway in the aziridination by a tosylimido ruthenium porphyrin active species.     

Aryl C-H amination by diruthenium nitrides in the solid state and in solution at room temperature: experimental and computational study of the reaction mechanism

Diruthenium azido complexes Ru(2)(DPhF)(4)N(3) (1a, DPhF = N,N'-diphenylformamidinate) and Ru(2)(D(3,5-Cl(2))PhF)(4)N(3) (1b, D(3,5-Cl(2))PhF = N,N'-bis(3,5-dichlorophenyl)formamidinate) have been investigated by thermolytic and photolytic experiments to investigate the chemical reactivity of the corresponding diruthenium nitride species. Thermolysis of 1b at ~100 °C leads to the expulsion of N(2) and isolation of Ru(2)(D(3,5-Cl(2))PhF)(3)NH(C(13)H(6)N(2)Cl(4)) (3b), in which a nitrogen atom has been inserted into one of the proximal aryl C-H bonds of a D(3,5-Cl(2))PhF ligand. A similar C-H insertion product is obtained upon thawing a frozen CH(2)Cl(2) solution of the nitride complex Ru(2)(DPhF)(4)N (2a), formed via photolysis at -196 °C of 1a to yield Ru(2)(DPhF)(3)NH(C(13)H(10)N(2)) (3a). Evidence is provided here that both reactions proceed via direct intramolecular attack of an electrophilic terminal nitrido nitrogen atom on a proximal aryl ring. Thermodynamic and kinetic data for this reaction are obtained from differential scanning calorimetric measurements and thermal gravimetric analysis of the thermolysis of Ru(2)(D(3,5-Cl(2))PhF)(4)N(3), and by Arrhenius/Eyring analysis of the conversion of Ru(2)(DPhF)(4)N to its C-H insertion product, respectively. These data are used to develop a detailed, experimentally validated DFT reaction pathway for N(2) extrusion and C-H functionalization from Ru(2)(D(3,5-Cl(2))PhF)(4)N(3). The diruthenium nitrido complex is an intermediate in the calculated reaction pathway, and the C-H functionalization event shares a close resemblance to a classical electrophilic aromatic substitution mechanism.     

Dinuclear ruthenium and iron complexes containing palladium and platinum with tri-tert-butylphosphine ligands: synthesis, structures, and bonding

The reaction of Pd(PBu(t)(3))(2) with Ru(CO)(5) yielded the dipalladium-diruthenium cluster complex Ru(2)(CO)(9)[Pd(PBu(t)(3))](2), 10. The reaction of Pt(PBu(t)(3))(2) with Ru(CO)(5) at room temperature afforded the diplatinum-diruthenium cluster complex Ru(2)(CO)(9)[Pt(PBu(t)(3))](2), 12, and the monoplatinum-diruthenium cluster PtRu(2)(CO)(9)(PBu(t)(3)), 11. All three complexes contain a diruthenium group with bridging Pd(PBu(t)(3)) or Pt(PBu(t)(3)) groups. Compound 11 can be converted to 12 by reaction with an additional quantity of Pt(PBu(t)(3))(2). The reaction of 12 with hydrogen at 68 degrees C yielded the dihydrido complex Pt(2)Ru(2)(CO)(8)(PBu(t)(3))(2)(micro-H)(2), 13. This complex contains a Ru(2)Pt(2) cluster with hydride ligands bridging two of the Ru-Pt bonds. The reaction of Fe(2)(CO)(9) with Pt(PBu(t)(3))(2) yielded the platinum-diiron cluster complex PtFe(2)(CO)(9)(PBu(t)(3)), 14, which is analogous to 11. All new complexes were characterized crystallographically. Molecular orbital calculations of 10 reveal an unusual delocalized metal-metal bonding system involving the Pd(PBu(t)(3)) groups and the Ru(2)(CO)(9) group.     

C-H activation reactions of ruthenium N-heterocyclic carbene complexes: application in a catalytic tandem reaction involving C-C bond formation from alcohols

A series of ruthenium hydride N-alkyl heterocyclic carbene complexes has been investigated as catalysts for a tandem oxidation/Wittig/reduction reaction to give C-C bonds from alcohols. The C-H-activated carbene complex Ru(IiPr(2)Me(2))'(PPh(3))(2)(CO)H (9) proves to be the most active precursor catalyzing the reaction of PhCH(2)OH and Ph(3)P=CHCN in 3 h at 70 degrees C. These results provide (a) a rare case in which N-alkyl carbenes afford higher catalytic activity than their N-aryl counterparts and (b) a novel example of the importance of NHC C-H activation in a catalytic cycle.     

Selective and catalytic arylation of N-phenylpyrrolidine: sp3 C-H bond functionalization in the absence of a directing group

We herein describe our studies on arylation of N-phenylpyrrolidine, which led to the development of a new transformation for the direct and selective arylation of sp3 C-H bonds in the absence of a directing group. In this method, Ru(H)2(CO)(PCy3)3 4 was used as the catalyst, and preliminary mechanistic studies suggested that Ru(Ph)(I)(CO)(PCy3)2 5 is the key intermediate of the catalytic cycle. A large kinetic isotope effect (kH/kD = 5.4) was observed, which supports the proposal that C-H bond metalation is the slow step. Preliminary examination of the substrate scope showed that in addition to N-phenylpyrrolidine, N-methyl- and N-benzylpyrrolidine, as well as N-benzoylpyrrolidine, were arylated under the reaction conditions.     

Bimetallic cluster complexes: the synthesis, structures, and bonding of ruthenium carbonyl cluster complexes containing palladium and platinum with the bulky tri-tert-butyl-phosphine ligand

The bis-phosphine compounds M(PBut3)2, M = Pd and Pt, readily eliminate one PBut3 ligand and transfer MPBut3 groups to the ruthenium-ruthenium bonds in the compounds Ru3(CO)12, Ru6(CO)17(micro6-C), and Ru6(CO)14(eta6-C6H6)(micro6-C) without displacement of any of the ligands on the ruthenium complexes. The new compounds, Ru3(CO)12[Pd(PBut3)]3, 10, and Ru6(CO)17(micro6-C)[Pd(PBut3)]2, 11, Ru6(CO)17(micro6-C)[Pt(PBut3)]n, n = 1 (12), n = 2 (13), and Ru6(CO)14(eta6-C6H6)(micro6-C)[Pd(PBut3)]n, n = 1 (15), n = 2 (16), have been prepared and structurally characterized. In most cases the MPBut3 groups bridge a pair of mutually bonded ruthenium atoms, and the associated Ru-Ru bond distance increases in length. Fenske-Hall calculations were performed on 10 and 11 to develop an understanding of the electron deficient metal-metal bonding. 10 undergoes a Jahn-Teller distortion to increase bonding interactions between neighboring Ru(CO)4 and Pd(PBut3) fragments. 11 has seven molecular orbitals important to cluster bonding in accord with cluster electron-counting rules.     

Synthesis, characterisation, crystal structures, reactivity, and electrochemistry of ruthenium-nitrido, ruthenium-cobalt-imido and ruthenapyrrolidone carbonyl clusters containing alkyne ligands

Thermolysis of [Ru3(CO)9(mu3-NOMe)(mu3-eta2-PhC2Ph)] (1) with two equivalents of [Cp*Co(CO)2] in THF afforded four new clusters, brown [Ru5(CO)8(mu-CO)3(eta5-C5Me5)(mu5-N)(mu4-eta2-PhC2Ph)] (2), green [Ru3Co2(CO)7(mu3-CO)(eta5-C5Me5)2(mu3-NH)[mu4-eta8-C6H4-C(H)C(Ph)]] (3), orange [Ru3(CO)7(mu-eta6-C5Me4CH2)[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (4) and pale yellow [Ru2(CO)6[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (5). Cluster 2 is a pentaruthenium mu5-nitrido complex, in which the five metal atoms are arranged in a novel "spiked" square-planar metal skeleton with a quadruply bridging alkyne ligand. The mu5-nitrido N atom exhibits an unusually low frequency chemical shift in its 15N NMR spectrum. Cluster 3 contains a triangular Ru2Co-imido moiety linked to a ruthenium-cobaltocene through the mu4-eta8-C6H4C(H)C(Ph) ligand. Clusters 4 and 5 are both metallapyrrolidone complexes, in which interaction of diphenylacetylene with CO and the NOMe nitrene moiety were observed. In 4, one methyl group of the Cp* ring is activated and interacts with a ruthenium atom. The "distorted" Ru3Co butterfly nitrido complex [Ru3Co(CO)5(eta5-C5Me5)(mu4-N)(mu3-eta2-PhC2Ph)(mu-I)2I] (6) was isolated from the reaction of 1 with [Cp*Co(CO)I2] heated under reflux in THF, in which a Ru-Ru wing edge is missing. Two bridging and one terminal iodides were found to be placed along the two Ru-Ru wing edges and at a hinge Ru atom, respectively. The redox properties of the selected compounds in this study were investigated by using cyclic voltammetry and controlled potential coulometry. 15N magnetic resonance spectroscopy studies were also performed on these clusters.