Palladium bipyridyl complex anchored on nanosized MCM-41 as a highly efficient and recyclable catalyst for Heck reaction

Palladium bipyridyl complex anchored inside the channels of nanosized MCM-41 silicas was found to be a highly efficient and recyclable catalyst for the Heck reaction with a turnover number up to 10⁶ for each cycle.     

Pd/MCM-41催化碘苯Ullmann偶合制备联苯

联苯是一种重要的有机合成中间体,广泛应用于超分子、高性能染料和药物活性剂以及有机导体和半导体的生产中。目前,联苯的合成方法主要有Ullmann偶合反应、Stille反应、Heek反应、Suzuk反应和Sonogashira反应等。其中,Ullmann偶合反应由于成本低且简单易操作而倍受青睐。最早采用Cu-基催化剂,但需要在高温下进行,反应条件相当苛刻。采用Pd-基均相催化剂可大大降低反应温度,     

无溶剂高度分散Ni/MCM-41催化剂的制备及其萘加氢性能

分别用机械研磨无溶剂法、添加柠檬酸无溶剂法制备了Ni/MCM-41催化剂,对所制催化剂进行了分析表征,探究其萘加氢反应性能并与常规浸渍法进行了对比。与常规浸渍法相比,机械研磨无溶剂法所制催化剂的物理性质相近,金属镍分散度和萘加氢性能略有提高;添加柠檬酸无溶剂法则显著提升了催化剂的分散度和萘加氢性能,金属镍分散度由6.9%大幅提高至67.9%,萘加氢性能提高了近1倍。通过红外光谱、紫外光谱和热重分析,提出了添加柠檬酸对无溶剂法制备催化剂性能的促进作用机制。     

Immobilization of palladium in mesoporous silica matrix: preparation, characterization, and its catalytic efficacy in carbon-carbon coupling reactions

Palladium(0) has been immobilized into the silica-based mesoporous material to develop catalyst Pd(0)-MCM-41, which is found to be highly active in carbon-carbon coupling reactions. [Pd(NH3)4]2+ ions have been incorporated into the mesoporous material during synthesis of MCM-41 and subsequently upon treatments with hydrazine hydrate Pd2+ ions present in mesoporous silica matrix were reduced to Pd(0) almost instantaneously. The catalyst has been characterized by small-angle X-ray diffraction, N2 sorption, and transmission electron microscopy (TEM). TEM and surface area measurements clearly demonstrate that the immobilization of Pd(0) into the mesoporous silica has a significant effect on pore structure of the catalyst. Nevertheless, after immobilization of palladium the meso-porosity of the material is retained, as evidenced in the nitrogen sorption measurement. The TEM micrograph shows that both MCM-41 and Pd(0)-MCM-41 have similar types of external surface morphology; however, Pd(0)-MCM-41 was less ordered. Pd(0)-MCM-41 showed high catalytic activity toward carbon-carbon bond formation reactions like Heck and Sonogashira coupling, as evidenced in high turn-over numbers. In contrast to many other Pd-based catalysts reported so far, Pd(0)-MCM-41 acts as a truly heterogeneous catalyst in C-C coupling reactions. Notably, the new heterogeneous catalyst is found to be efficient in the activation of arylchloride to give impressive conversion in cross coupling (15-45% for Heck and 30% for Sonogashira) reactions under mild conditions.     

Anchored palladium bipyridyl complex in nanosized MCM-41: a recyclable and efficient catalyst for the Kumada-Corriu reaction

A palladium bipyridyl complex anchored onto nanosized mesoporous silica MCM-41 catalyzed the cross-coupling of aryl iodides or bromides with Grignard reagents to provide the corresponding biaryls in high yields. The reaction proceeded smoothly with an equal molar amount of substrate and Grignard reagent in the presence of 0.2-0.02 mol % of catalyst in THF at 50 °C or under refluxing conditions. The catalyst prepared may be used in a very low percentage, recovered after reaction, and re-used.     

Catalytic activity of nanosized Co-Cu oxide systems in the deep oxidation of methane

The effect of the composition of nanosized catalysts, produced by thermal decomposition of Co(II) and Cu(II) formates deposited on ZrO₂, SBA-15, and MCM-41, on their activity in the deep oxidation of methane was investigated. It was shown that the activity of the catalyst depends on the nature of the support and on the Co/Cu ratio. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 41, No. 6, pp. 331–335, November–December, 2005.     

PtSn/Al2O3/MCM-41催化剂的丙烷脱氢催化性能

用微型催化反应装置评价, 并结合X射线粉末衍射(XRD)、表面积和孔结构测试、程序升温还原(TPR)、氢化学吸附和热重分析等方法研究了负载型PtSn/γ-Al2O3, PtSn/MCM-41和PtSn/Al2O3/MCM-41催化剂的丙烷脱氢反应催化性能. 发现PtSn/Al2O3/MCM-41催化剂具有较PtSn/MCM-41催化剂高的丙烷脱氢反应活性和较PtSn/γ-Al2O3催化剂高的反应稳定性. 实验结果表明, 纯硅MCM-41载体表面的锡物种因与载体相互作用较弱故易被还原, 导致铂金属分散度和催化剂的丙烷脱氢活性较低. 用Al2O3修饰MCM-41可以增强Sn物种与Al2O3/MCM-41载体之间的相互作用, 提高PtSn/Al2O3/MCM-41催化剂铂金属分散度和丙烷脱氢催化活性. 并且, 积炭后的PtSn/Al2O3/MCM-41催化剂具有较高的铂金属表面裸露度, 故具有较高的丙烷脱氢反应稳定性. PtSn/Al2O3/MCM-41催化剂优良的丙烷脱氢催化性能可能不仅与Sn-载体Al2O3/MCM-41较强的相互作用有关, 而且与Al2O3/MCM-41载体的介孔结构有关.     

Heterogeneous Suzuki and Stille coupling reactions using highly efficient palladium(0) immobilized MCM-41 catalyst

An efficient palladium(0) immobilized MCM-41 catalytic system for C-C cross-coupling reaction has been developed. Ligand-free Pd(0)-MCM-41 catalyst can be successfully used in coupling reaction between various aryl halides including deactivated chlorobenzene with aryl borane and organotin to give biaryls in excellent yields with high turnover frequency (TOF) (the maximal TOFs are up to 6990 for the reaction of bromobenzene with phenylboronic acid). The catalyst can be recycled and reused without any loss of catalytic activity.     

负载型磷化镍催化剂的空气表面改性法制备及其加氢脱氧性能

以MCM-41为载体,采用先前驱体氢气低温(673 K)还原、空气表面改性的方法制备了高活性的Ni2P/M CM-41催化剂,并采用XRD、BET、SEM、TEM、XPS和CO吸附等手段对催化剂进行了表征。以苯并呋喃(BF)加氢脱氧(HDO)为探针反应,考察了空气表面改性对Ni2P/M CM-41催化剂结构和HDO性能的影响。结果表明,空气表面改性得到的催化剂,活性相为单一的Ni2P;空气表面改性能够降低催化剂表面P物种的集聚,有助于小尺寸、高分散的Ni2P活性相的生成。在573 K、3.0 M Pa、质量空速为4.0 h-1、H2/油体积比为500的条件下,Ni2P/M CM-41催化剂上BF转脱氧产物收率高达88%,较程序升温还原法制备的催化剂高50%。     

Preparation and Acid Catalytic Activity of TiO2 Grafted Silica MCM-41 with Sulfate Treatment

TiO2 grafted silica MCM-41 catalyst with and without sulfate treatment were prepared. The structural and acid properties of these materials were investigated by XRD, N2 adsorption-desorption, element analysis, thermal analysis, Raman and FTIR measurements. Their acid-catalytic activities were evaluated using the cyclization reaction of pseudoionone. It was found that the obtained materials possess well-ordered mesostructure, and the grafted TiO2 components were in highly dispersed amorphous form. T/MCM41 without sulfation contained only Lewis acid sites, while Br?nsted and Lewis acidities were remarkably improved for the sulfated materials ST/MCM41 and d-ST/MCM41. T/MCM-41 was not active for the cyclization reaction of pseudoionone, but ST/MCM-41 and d-ST/MCM-41 possessed favorable catalytic activities. The catalytic performance of ST/MCM-41 was comparable with that of the commercial solid acid catalyst of Amberlyst-15, and better than that of d-ST/MCM-41, although the latter underwent a second TiO2 grafting process and accordingly had higher Ti and S content. The specific surface structure of Si-O-Ti-O-S=O in ST/MCM-41 and the bilateral induction effect of Si and S=O on Si-O-Ti bonds were speculated to account for its higher acid catalytic activity.     

Highly-efficient and recyclable nanosized MCM-41 anchored palladium bipyridyl complex-catalyzed coupling of acyl chlorides and terminal alkynes for the formation of ynones

A highly-efficient and practical method for the formation of ynones from a variety of acyl chlorides and terminal alkynes catalyzed by a nanosized MCM-41 anchored palladium bipyridyl complex is described herein. Aroyl, heteroaroyl, and alkyl acyl chlorides were easily coupled with terminal alkynes, giving good to high isolated yields in the presence of a very low catalyst loading (0.002-0.1 mol % Pd) in Et₃N or diisopropylethylamine at 50 °C. Furthermore, the reaction scale was up to 150 mmol for a single batch reaction, providing the potential for practically synthetic application. After centrifugation, the supported catalyst was able to be recycled and reused several times with only a slight decrease in activity.     

Ni-SiW12／MCM-41催化剂的制备与催化性能研究

加氢转化是石油炼制工业中的一项重要工艺,近年来,随着石油工业对中间馏分油需求的持续增长和环保要求的日益苛刻,加氢转化技术面临着巨大挑战。目前对C6以下正构庚烷异构化反应的研究较多,对庚烷等长链正构烷烃异构化研究在国外已有报道,在国内对长链烷烃异构化的研究刚处于起     

高酸度和高水热稳定性MCM-41的合成及萘加氢催化性能

以十六烷基三甲基溴化铵为模板剂,以具有Y沸石次级结构单元的水凝胶为前驱体,在pH=10左右的条件下合成了与MCM-41相类似的介孔分子筛。同时利用各种表征手段对合成的样品进行了一系列的表征。结果表明，所合成的样品具有六方规整结构和较厚的孔壁，并具有较强酸强度和水热稳定性。同时，考察了其负载Pd-Pt活性组分后的萘加氢反应活性和抗硫性,并与常规法合成的具有相同硅铝比的MCM-41载体进行了比较。     

MCM-41-HY复合分子筛的合成及其在深度加氢脱硫中的应用

在水热条件下合成了包覆型MCM-41-HY复合分子筛.采用XRD、N2气吸附和SEM等方法对其进行了表征.结果表明,MCM-41-HY复合分子筛和MCM-41与H型Y沸石(HY)的机械混合物明显不同,在复合分子筛MCM-41-HY中,中孔相MCM-41附晶生长在HY沸石上,将HY包覆起来.以二苯并噻吩为模型化合物,考察了该材料担载NiMo催化剂的加氢脱硫活性.结果表明,MCM-41-HY复合分子筛与MCM-41和HY的机械混合物担载NiMo催化剂的加氢脱硫(HDS)活性相当,但MCM-41-HY复合分子筛担载NiMo催化剂的裂化活性较低.其裂化活性不同的原因在于其载体孔道结构和酸性位的分布不同.     

镍(II)配合物官能化的MCM-41催化分子氧环氧化苯乙烯

制备了镍(II)席夫碱配合物官能化的MCM-41多相催化剂MCM-41-Ni.利用X射线粉末衍射、氮气物理吸附脱附、红外光谱、热重、电感耦合等离子体原子发射光谱、元素分析和透射电镜等方法对催化剂进行了表征.以氧气为氧化剂,MCM-41-Ni在催化环氧化苯乙烯的反应中表现出较高的催化活性;苯乙烯的转化率为95.2%,环氧苯乙烷的选择性为66.7%.系统地研究了反应温度、催化剂用量、溶剂以及反应时间对反应性能的影响.催化剂经过4次循环仍然表现出较好的稳定性和催化活性.     

Hβ/MCM-41复合分子筛催化剂上苯甲醚与乙酸酐酰化反应研究

以β沸石为硅源,制备了不同硅铝比的Hβ/MCM-41复合分子筛,考察了该复合分子筛对苯甲醚与乙酸酐酰化反应的催化效果,并与介孔MCM-41、微孔Hβ分子筛的催化效果进行了比较,研究了分子筛硅铝比、酸性及孔道结构对酰化反应催化性能的影响。结果表明,对于苯甲醚和乙酸酐酰化反应,Hβ/MCM-41复合分子筛具有较好的催化稳定性,反应过程中的积炭量较少,积炭的碳氢比较低。该复合分子筛不仅具有微孔沸石的强酸性,而且具有较大孔径的介孔,产物分子能及时从孔道中扩散出来,催化活性位不易中毒失活。     

MCM-41固载胺钯配合物的制备及对Heck反应催化性能的研究

以MCM-41分子筛作为固载材料, 经氨基功能化后与各种钯化合物形成一系列MCM-41载钯配合物, 采用XRD, XPS等技术对其结构及表面性能进行了表征, 研究了催化剂的制备条件等因素对催化Heck芳基化反应性能的影响; 以共轭烯烃和各种芳基碘的Heck芳基化反应考察了MCM～NH₂•Pd(0, II)配合物的催化性能. 结果表明, MCM-41的结构没有被破坏, MCM～NH₂载钯配合物具有较高的催化活性和立体选择性, 在较低的温度(70～90 ℃)下, 可高产率地生成一系列取代的反式产物.     

Oxime carbapalladacycle covalently anchored to high surface area inorganic supports or polymers as heterogeneous green catalysts for the Suzuki reaction in water

An oxime carbapalladacycle known as an extremely active homogeneous catalyst for the Suzuki coupling in water has been conveniently modified and anchored on high surface area SiO(2), MCM-41, and polystyrene-divinylbenzene and ethylenglycol dimethylacrylate polymers. The resulting solids were characterized by analytical and spectroscopic (UV-vis and IR) techniques and tested as catalysts for the reaction of 4-chloroacetophenone with phenylboronic acid in water, dioxane, and a mixture of both. Differences in activity depending on the support were remarkable, the palladium complex being more active for the reactions in water when supported on SiO(2) or MCM-41. The catalysts were truly heterogeneous (no leached palladium) and when anchored on SiO(2) were reused seven times without loosing activity. Palladium complex anchored in SiO(2) was also tested as Suzuki catalyst for a wide range of bromo-, chloro-, and even fluoroaromatics.     

Light olefins and light oil production from catalytic pyrolysis of waste tire

This paper investigates the catalytic activity of MCM-41 synthesized via silatrane route and Ru/MCM-41 in waste tire pyrolysis. The experimental results showed that the presence of catalysts strongly influenced the yield and nature of products. Namely, the gas yield increased at the expense of liquid yield. In addition, a considerable high yield of light olefins, 4 times higher than non-catalytic pyrolysis, can be achieved for Ru/MCM-41 catalyst. Furthermore, the uses of catalysts produced much lighter oil and there was a drastic increase in the concentration of single ring aromatics in accordance to a reduction in polycyclic aromatic compounds in the derived oils. Ru/MCM-41 produced the lightest oil and the oil has the highest concentration of mono-aromatics. The high activity of catalysts, particularly Ru/MCM-41 was discussed in relation with the catalyst characterization results obtained from various techniques including TPD-NH₃, H₂-chemisorption, XRD, N₂-adsorption/desorption analysis, and TPO.     

A facile synthesis of terminal arylacetylenes via Sonogashira coupling reactions catalyzed by MCM-41-supported mercapto palladium（0） complex

A variety of terminal arylacetylenes have been conveniently synthesized in good to high yields via Sonogashira coupling of aryl iodides with （trimethylsilyl）acetylene catalyzed by MCM-41-supported mercapto palladium（0） complex, followed by desilylation under mild conditions. This polymeric palladium catalyst can be reused many times without any decrease in activity.