共查询到19条相似文献,搜索用时 93 毫秒
1.
聚对甲苯胺修饰电极的研制及其PH特性的研究 总被引:2,自引:0,他引:2
本文叙述了聚对甲苯胺修饰电极的制备及其电化学响应特性。在PH2-13范围内电极电位与PH有良好的线性关系,电极响应应快,导电性能良好,抗干扰性能强,不受氧化还原物物质影响。用于测定饮料、湖水的PH值,结果与玻璃电极测定值基本相符。 相似文献
2.
一种新的适合低pH范围的中性载体PVC膜电极的研究 总被引:2,自引:0,他引:2
设计并合成了N-十八烷基水杨醛亚胺(ODSAI),N-十八烷基苯甲醛亚胺(ODBAI)两种新的亚胺化合物,并以此为中性载体,制成了PVC膜PH电极。此电极在PH0.6-8.5的范围内,对氢离子呈现很的能斯响应,电极斜率为52mV/pH。 相似文献
3.
以超细MnO2粉末为敏感材料制备了两种固体PH电极,涂层电极可以在水溶液中呈现出快速稳定的PH响应。响应的线性范围为PH2-12,响应灵敏度为-81.5mV/pH。印刷电极的一性响应范围要略窄于涂层电极,但响应灵敏度近似。 相似文献
4.
铅基磷酸铅化学修饰电极的研究 总被引:3,自引:0,他引:3
本研制了铅基磷酸铅化学饰电极,并研究了该CME的性能。实验发现,该CME是一种磷酸根离子敏感电极。电极对磷酸盐有类能斯特响应,在PH4.0和6.0下,其线性范围分别为1×10^-3-1×10^-1和1×10^-4-1×10^-2mol/L磷酸盐,电极响应斜率为23-27mV/dec.电极有较好的稳定性重现性,可望用于磷酸盐的实际分析。 相似文献
5.
由电聚合法用聚苯胺修饰碳纤维电极作为PH敏感电极。 把K3Fe(CN)6/K4Fe(CN)6体系填入医用注射针头内成为参比电极。把经聚苯胺修饰的碳纤维电极安置入该针型参比电极内构成复合针型微PH传感器。该传感器成功地应用于在体PH测定以及水果内微区PH测定。 相似文献
6.
用聚吲哚乙酸修饰电极测定肾上腺素 总被引:10,自引:0,他引:10
报道了聚吲哚乙酸修饰电极的制备,并研究了肾上腺素在该修饰电极上的循环伏安特性及测定方法。实验表明,在PH7.0的磷酸盐缓冲溶液中,用该电极测定肾上腺素的线性范围为1.0*10^-7-6.0*10^-6mol/L,检出限为4.0*10^T-8mol/L。将此法用于药剂中肾上腺素的测定,结果满意。 相似文献
7.
混合型中性载体PVC膜pH电极的研究 总被引:1,自引:1,他引:1
本文以菸酸十八烷基酯和二辛基十八胺两性载体混合研制成PVC膜PH电极,采用正交实验设计优化了电极的膜组成,测得电极的PH线性响应范围为1.8-12.1,秦为55.6mV/pH(18℃),获得满意结果。 相似文献
8.
醋酸纤维素为母体的稀土离子选择电极,制备容易,使用方便,可以测定混合稀土,电极的线性范围为1.2×10^-1~1×10^-5mol/L,适宜的PH范围较宽,测定结果令人满意。 相似文献
9.
10.
合成了二硫化二(N,N-1,4-亚丁基)秋兰姆,以此为载体,制备了PVC膜铜离子敏感电极。结果表明,电极对铜离子具有好的选择性和灵敏度。线性范围为8.0×10^-^7-1.0×10^-^2mol/L。实验发现有选定的底液条件下此电极对蛋白质蛮具有较好的响应,线性范围为12.5-200mg/L。讨论了电极有关性能。 相似文献
11.
采用木犀草素为pH值选择性试剂,石墨粉为导电基质,PVC为成膜材料,自制无毒无害的pH柔性膜电极(pH flexible electrode,pH/FE)。该电极有一个氧化峰,它的峰电位对2.00~9.00范围内的pH值有线性响应,并且具有弯曲度好、抗拉伸性强、溶胀性能稳定、准确度高,选择性好等性能。此电极有望作为柔性检测器件用于非平面介质表面液层pH值的测定。 相似文献
12.
13.
14.
纳米Co3O4型固体pH电极的响应及应用 总被引:2,自引:0,他引:2
测定酸度目前广泛采用玻璃电极 .然而 ,由于玻璃电极是采用极薄的玻璃膜作为 H+的敏感膜 ,致使电极极易破碎 ,亦难以用于对玻璃有腐蚀作用的体系 ,如含氟体系 .此外它还具有体积大、成本较高、膜阻抗高而难以实现微型化、以及使用前需活化处理等缺点 .多年来对非玻璃型 p H电极的研究一直是个热门的研究课题 .其中以金属 /金属氧化物型固体 p H电极倍受关注 [1~ 6 ] .本文对氧化钴 (Co3 O4 )型固体 p H印刷电极的响应性能、选择性、重现性以及在含氟腐蚀体系 p H测定中的应用进行了研究 .Ф1 2型 p H计 (BECKMAN公司 ) ,2 3 2型饱和… 相似文献
15.
《Electroanalysis》2006,18(15):1493-1498
Titanium nitride was used as pH‐sensitive material to fabricate all solid‐state pH electrode. The fabrication and the response performance of the pH electrode were described in the paper. The TiN film electrode showed a linear response in the pH range of 2–12 with a near‐Nenstian response (?55 mV/pH). The response time was within 1 min, and the electrode had good reproducibility, stability and low sensitivities for different species. Compared with the glass pH electrode, the electrode exhibited some advantages, for example, without activation, rapid response and high mechanical strength. In addition, the electrode performed excellently in a corrosion medium containing F?(1 M). Electrochemical behaviors of TiN electrode in Britton‐Robinson buffers were studied with Electrochemical Impedance Spectroscopy (EIS). 相似文献
16.
p H值是溶液化学中重要的检测指标 .在工业、农业、生物、医学及环境保护等各个领域都有着广泛应用 .目前 ,多采用玻璃 p H电极进行 p H值的测量 .然而 ,玻璃 p H电极也存在一定的不足 ,玻璃敏感膜阻抗高达 1 0 10 Ω,容易造成电磁干扰 ;玻璃 p H电极极易破碎 ,难以适用于强搅拌的工业过程体系 ;氢氟酸能强烈地浸蚀玻璃膜 .因此 ,玻璃 p H电极不能长时间地用于含氟腐蚀体系 p H的测量 ;另外 ,玻璃 p H电极在强碱性溶液测量时会产生“钠差”.因此 ,多年来对非玻璃型 p H电极的研究一直是化学传感器研究领域中的活跃课题之一 .目前常见的… 相似文献
17.
18.
A glassy carbon electrode has been coated by electrodeposition with a thin film of cobalt based layered double hydroxide (LDH) and used as a pH sensor. The developed electrode displays a linear super‐Nernstian response (?76.2±0.6 mV/pH) in the pH range between 2 and 14 and it is particularly suitable to operate in strongly alkaline solution. The reproducibility of the sensor construction is good with a relative standard deviation of the calibration curve slopes of±2.5 % (n=4). The electrode has a response time comparable to that exhibited by commercial glass electrodes in the pH range examined and is not affected by interference from the most common anions and cations. 相似文献
19.
A screen-printable method is proposed to prepare a ceramic carbon composite sensor for pH determination. The pH-sensing membrane of the sensor is prepared by sol-gel, graphite powder and zeolite, in which zeolite is used as a receptor of proton. The fabrication of this ceramic carbon sensor includes three steps: preparing electrode slides, making a pH-sensing composite ink and screen-printing the ink on electrode slides. Optimum conditions for the ceramic carbon composite film are established, and characters of the pH electrode (stability, reproducibility, lifetime and conductivity) are examined comparing with glass pH electrodes. The Nernst response to pH of the sensor is in the range of pH 1-12 with a slope of 60 mV per pH. The sensor has been applied to pH measurements of samples and satisfactory results were obtained with R.S.D. of 0.18-1.25%. 相似文献