Disulfides of manganese carbonyl. Synthesis of Mn(2)(CO)(7)(mu-S2) and its reactions with tertiary phosphines and arsines

The reaction of Mn(2)(CO)(9)(NCMe) with thiirane yielded the sulfidomanganese carbonyl compounds Mn(2)(CO)(7)(mu-S(2)), 2, Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)), 3, and Mn(4)(CO)(14)(NCMe)(mu(3)-S(2))(mu(4)-S(2)), 4, by transfer of sulfur from the thiirane to the manganese complex. Compound 3 was obtained in better yield from the reaction of 2 with CO, and compound 4 is obtained from the reaction of 2 with NCMe. The reaction of 2 with PMe(2)Ph yielded the tetramanganese disulfide Mn(4)(CO)(15)(PMe(2)Ph)(2)(mu(3)-S)(2), 5, and S=PMe(2)Ph. The reaction of 5 with PMe(2)Ph yielded Mn(4)(CO)(14)(PMe(2)Ph)(3)(mu(3)-S)(2), 6, by ligand substitution. The reaction of 2 with AsMe(2)Ph yielded the new complexes Mn(4)(CO)(14)(AsMe(2)Ph)(2)(mu(3)-S(2))(2), 7, Mn(4)(CO)(14)(AsMe(2)Ph)(mu(3)-S(2))(mu(4)-S(2)), 8, Mn(6)(CO)(20)(AsMe(2)Ph)(2)(mu(4)-S(2))(3), 9, and Mn(2)(CO)(6)(AsMe(2)Ph)(mu-S(2)), 10. Reaction of 2 with AsPh(3) yielded the monosubstitution derivative Mn(2)(CO)(6)(AsPh(3))(mu-S(2)), 11. Reaction of 7 with PMe(2)Ph yielded Mn(4)(CO)(15)(AsMe(2)Ph)(2)(mu(3)-S)(2), 12. The phosphine analogue of 7, Mn(4)(CO)(14)(PMe(2)Ph)(2)(mu(3)-S(2))(2), 13, was prepared from the reaction of Mn(2)(CO)(9)(PMe(2)Ph) with Me(3)NO and thiirane. Compounds 2-9 and 11-13 were characterized by single-crystal X-ray diffraction. Compound 2 contains a disulfido ligand that bridges two Mn(CO)(3) groups that are joined by a Mn-Mn single bond, 2.6745(5) A in length. A carbonyl ligand bridges the Mn-Mn bond. Compounds 3 and 4 contain four manganese atoms with one triply bridging and one quadruply bridging disulfido ligand. Compounds 5 and 6 contain four manganese atoms with two triply bridging sulfido ligands. Compound 9 contains three quadruply bridging disulfido ligands imbedded in a cluster of six manganese atoms.     

Mechanistic analysis of reductive nitrosylation on water-soluble cobalt(III)-porphyrins

The reactions of NO and/or NO2- with three water-soluble cobalt porphyrins [Co(III)(P)(H2O)2]n, where P = TPPS, TCPP, and TMPyP, were studied in detail. At pH < 3, the reaction with NO proceeds through a single reaction step. From the kinetic data and activation parameters, the [Co(III)(P)(NO)(H2O)]n complex is proposed to be the primary product of the reaction with NO. This complex reacts further with a second NO molecule through an inner-sphere electron-transfer reaction to generate the final product, [Co(III)(P)(NO-)](n-1). At pH > 3, although a single reaction step is also observed, a systematic study as a function of the NO and NO2- concentrations revealed that two reaction steps are operative. In the first, NO2- and NO compete to substitute coordinated water in [Co(III)(P)(H2O)2]n to yield [Co(III)(P)(NO)(H2O)]n and [Co(III)(P)(NO2-)(H2O)](n-1) as the primary reaction products. Only the nitrite complex could be detected and no final product formation was observed during the reaction. It is proposed that [Co(III)(P)(NO)(H2O)]n rapidly reacts with NO2- to form the nitrite complex, which in the second reaction step reacts with another NO molecule to generate the final product through an inner-sphere electron-transfer reaction. The reported results are relevant for the interaction of vitamin B(12a) with NO and NO2-.     

A 1D Schiff base zinc polymer as a versatile metallo-ligand for the synthesis of polynuclear zinc cages

The 1D polymeric Schiff base zinc complex, [LZn(2)Et(2)](n), where LH(2) = (NN'-ethylene-bis(4-iminopentan-2-one)) has been demonstrated as a useful synthetic metallo building block for the synthesis of homo and heteronuclear zinc cages. The reaction of [LZn(2)Et(2)](n) with CdI(2) afforded the hetero-nuclear cage, 1, [L(2)Zn(4)(Et)(2)CdI(4)], while reaction with HgI(2) afforded a hexanuclear zinc cage, [L(2)Zn(6)(Et)(4)(μ(4)O)(μ(3)OEt)I], 2. The versatility of [LZn(2)Et(2)](n) as a metallo building block is demonstrated through the reaction with ferrocenyl carboxylic acid, affording the ferrocenyl supported zinc cage, [L(2)Zn(8)(FcCO(2))(4)(Et)(2)(OEt)(2)(μ(4)O)(2)], 3, while the reaction with Er(III) acetate afforded the decanuclear zinc cage, [L(3)Zn(10)(μ(4)O)(4)(Et)(6)], 4.     

Dinuclear ruthenium and iron complexes containing palladium and platinum with tri-tert-butylphosphine ligands: synthesis, structures, and bonding

The reaction of Pd(PBu(t)(3))(2) with Ru(CO)(5) yielded the dipalladium-diruthenium cluster complex Ru(2)(CO)(9)[Pd(PBu(t)(3))](2), 10. The reaction of Pt(PBu(t)(3))(2) with Ru(CO)(5) at room temperature afforded the diplatinum-diruthenium cluster complex Ru(2)(CO)(9)[Pt(PBu(t)(3))](2), 12, and the monoplatinum-diruthenium cluster PtRu(2)(CO)(9)(PBu(t)(3)), 11. All three complexes contain a diruthenium group with bridging Pd(PBu(t)(3)) or Pt(PBu(t)(3)) groups. Compound 11 can be converted to 12 by reaction with an additional quantity of Pt(PBu(t)(3))(2). The reaction of 12 with hydrogen at 68 degrees C yielded the dihydrido complex Pt(2)Ru(2)(CO)(8)(PBu(t)(3))(2)(micro-H)(2), 13. This complex contains a Ru(2)Pt(2) cluster with hydride ligands bridging two of the Ru-Pt bonds. The reaction of Fe(2)(CO)(9) with Pt(PBu(t)(3))(2) yielded the platinum-diiron cluster complex PtFe(2)(CO)(9)(PBu(t)(3)), 14, which is analogous to 11. All new complexes were characterized crystallographically. Molecular orbital calculations of 10 reveal an unusual delocalized metal-metal bonding system involving the Pd(PBu(t)(3)) groups and the Ru(2)(CO)(9) group.     

Nickel-manganese sulfido carbonyl cluster complexes. synthesis, structure, and properties of the unusual paramagnetic complexes Cp2Ni2Mn(CO)3(mu 3-E)2, E = S, Se

The reaction of Mn(2)(CO)(7)(mu-S(2)) with [CpNi(CO)](2) yielded the paramagnetic new compound Cp(2)Ni(2)Mn(CO)(3)(mu(3)-S)(2) (1) and a new hexanuclear metal product Cp(2)Ni(2)Mn(4)(CO)(14)(mu(6)-S(2))(mu(3)-S)(2) (2). Structurally, compound 1 contains two triply bridging sulfido ligands on opposite sides of an open Ni(2)Mn triangular cluster. EPR and temperature-dependent magnetic susceptibility measurements of 1 show that it contains one unpaired electron. The electronic structure of 1 was determined by Fenske-Hall molecular orbital calculations which show that the unpaired electron occupies a low lying antibonding orbital delocalized unequally across the three metal atoms. The selenium homologue Cp(2)Ni(2)Mn(CO)(3)(mu(3)-Se)(2) (3) was obtained from the reaction of a mixture of Mn(2)(CO)(10) and [CpNi(CO)](2) with elemental selenium and Me(3)NO.2H(2)O. It also has one unpaired electron. Compound 1 reacted with elemental sulfur to yield the dinickeldimanganese compound, Cp(2)Ni(2)Mn(2)(CO)(6)(mu(4)-S(2))(mu(4)-S(5)), 4, which can also be made from the reaction of Mn(2)(CO)(7)(mu-S(2)) with [CpNi(CO)](2) and sulfur. Compound 4 was converted back to 1 by sulfur abstraction using PPh(3). The reaction of Mn(2)(CO)(10) with [CpNi(CO)](2) in the presence of thiirane yielded the ethanedithiolato compound CpNiMn(CO)(3)(mu-SCH(2)CH(2)S) (5), which was also obtained from the reaction of Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)) with [CpNi(CO)](2) in the presence of thiirane. Compound 5 reacted with additional quantities of thiirane to yield the new compound CpNiMn(CO)(3)[mu-S(CH(2)CH(2)S)(2)], 6, which contains a 3-thiapentanedithiolato ligand that bridges the two metal atoms. Compound 6 was also obtained from the reaction of Mn(2)(CO)(10) with [CpNi(CO)](2) and thiirane. The molecular structures of the new compounds 1-6 were established by single-crystal X-ray diffraction analyses.     

The reactivity of N-heterocyclic carbenes and their precursors with [Ru(3)(CO)(12)

The ambient temperature reaction of the N-heterocyclic carbenes (NHCs) 1,3-dimesitylimidazol-2-ylidene (IMes) and 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IDipp) with the triruthenium cluster [Ru(3)(CO)(12)], in a 3 : 1 stoichiometric ratio, results in homolytic cleavage of the cluster to quantitatively afford the complexes [Ru(CO)(4)(NHC)] (; NHC = IMes, ; NHC = IDipp). Reaction of the 2-thione or hydrochloride precursors to IMes, i.e. S[double bond, length as m-dash]IMes and IMes.HCl, with the same triruthenium cluster affords the complexes [Ru(4)(mu(4)-S)(2)(CO)(9)(IMes)(2)] () and [Ru(4)(mu(4)-S)(CO)(10)(IMes)(2)] () (3 : 1 and 2 : 1 reaction), and [{Ru(mu-Cl)(CO)(2)(IMes)}(2)] () (3 : 1 reaction) respectively. By contrast, the complex [Ru(3)(mu(3)-S)(2)(CO)(7)(IMeMe)(2)] (), where IMeMe is 1,3,4,5-tetramethylimidazol-2-ylidene, is the sole product of the 2 : 1 stoichiometric reaction of S[double bond, length as m-dash]IMeMe with [Ru(3)(CO)(12)]. Compounds -, and have been structurally characterised by single crystal X-ray diffraction.     

Catalytic and enantioselective aza-ene and hetero-Diels-Alder reactions of alkenes and dienes with azodicarboxylates

Lewis acids such as Cu(OTf)(2), Zn(OTf)(2), Yb(OTf)(3) and Nd(OTf)(3) catalyze the aza-ene reaction of alkenes with azodicarboxylates, giving the allylic amination adducts. The use of bis(2,2,2-trichloroethyl)azodicarboxylate as the amination reagent and Cu(OTf)(2) and Yb(OTf)(3) as the catalysts gave the aza-ene reaction of different alkenes, leading to the corresponding allyl amines in high yields. Chiral copper complexes prepared from Cu(OTf)(2) and chiral bisoxazoline ligands were found to catalyze the enantioselective aza-ene reaction of azodicarboxylates with alkenes and the hetero-Diels-Alder reaction with cyclopentadiene, giving the corresponding aza-ene- and hetero-Diels-Alder adducts, respectively, in good yields and moderate enantioselectivities.     

Hydrothermal syntheses, crystal structures and magnetic properties of two copper(II) complexes involved in situ ligand synthesis

The hydrothermal reaction of Cu(NO(3))(2), isophthalate (ip) and 2,2'-bipyridine (2,2'-bpy) without or with K(2)Cr(2)O(7) affords different complexes, whose structures are controlled only by the addition of the K(2)Cr(2)O(7). The reaction of Cu(NO(3))(2), isophthalate and 2,2'-bipyridine yields a novel one-dimensional double-chain coordination polymer [Cu(3)(ip)(2)(Hipa)(2)(bpy)(2)](n) (1). However, with the addition of K(2)Cr(2)O(7) in the above reaction at the same hydrothermal conditions, a discrete hexanuclear Cu(II) complex [Cu(6)(ipO)(4)(2,2'-bpy)(2)(H(2)O)(2)].6H(2)O (2) (ipOH = 2-hydroxyisophthalate) was isolated. It is interesting to find that the in situ reaction of isophthalate (ip) oxidized to 2-hydroxyisophthalate (ipOH) occurs. K(2)Cr(2)O(7) acts as an oxidant. The magnetic properties of 1 and 2 have been investigated by variable-temperature magnetic susceptibility and magnetization measurements, and the results reveal that intramolecular ferromagnetic interactions exist with weak intermolecular antiferromagnetic interactions at very low temperature in 1 and weak antiferromagnetic interactions admixture with strong ferromagnetic interactions in 2.     

Theoretical study of O--O single bond formation in the oxidation of water by the ruthenium blue dimer

The first key step in the oxidation of water to O(2) by the oxidized species [(bpy)(2)(O)Ru(V)ORu(V)(O)(bpy)(2)](4+) of the Ru blue dimer is studied using density functional theory (DFT) and an explicit solvent treatment. In the model reaction system [L(2)(O)Ru(V)ORu(V)(O)L(2)](4+)·(H(2)O)(4)·W(76), the surrounding water solvent molecules W are described classically while the inner core reaction system is described quantum mechanically using smaller model ligands (L). The reaction path found for the O--O single bond formation involves a proton relay chain: direct participation of two water molecules in two proton transfers to yield the product [L(2)(HOO)Ru(IV)ORu(IV)(OH)L(2)](4+)·(H(2)O)(3)·W(76). The calculated ～3 kcal/mol reaction free energy and ～15 kcal/mol activation free energy barrier at 298 K are consistent with experiment. Structural changes and charge flow along the intrinsic reaction coordinate, the solvent's role in the reaction barrier, and their significance for water oxidation catalysis are examined in detail.     

Influence of Cu(II) on the interaction of sulfite with DNA

The quantitative influence of Cu(II) on the interaction of eukaryotic DNA with sulfite (SO(3)(2-)), which is a derivative of sulfur dioxide in the human body, was studied using ultraviolet (UV) absorption spectrometry. The results showed that under physiological pH conditions, SO(3)(2-) reacted weakly with DNA at concentrations of up to 10(-1)M, at which point a rapid increase in the reaction constant and the reaction number of SO(3)(2-) with DNA was observed. The addition of Cu(II) at concentrations ranging from 6.67 x 10(-4) to 3.33 x 10(-3)M to DNA-SO(3)(2-) binary systems increased the reaction constant of SO(3)(2-) with DNA 41- to 115-fold at a low concentration of SO(3)(2-) (10(-3)M), and 4- to 84-fold at an intermediate concentration of SO(3)(2-) (10(-2)M), but had little influence on the reaction number of SO(3)(2-) with DNA compared with the absence of Cu(II). When the concentration of SO(3)(2-) reached 10(-1)M, the presence of Cu(II) reduced the reaction number but had no effect on the reaction constant of SO(3)(2-) with DNA. These results show that the efficiency of SO(3)(2-) is increased in the presence of Cu(II) at high concentrations of SO(3)(2-).     

Mechanistic studies on the reactions of cyanide with a water-soluble Fe(III) porphyrin and their effect on the binding of NO

The reaction of the water-soluble Fe(III)(TMPS) porphyrin with CN(-) in basic solution leads to the stepwise formation of Fe(III)(TMPS)(CN)(H(2)O) and Fe(III)(TMPS)(CN)(2). The kinetics of the reaction of CN(-) with Fe(III)(TMPS)(CN)(H(2)O) was studied as a function of temperature and pressure. The positive value of the activation volume for the formation of Fe(III)(TMPS)(CN)(2) is consistent with the operation of a dissociatively activated mechanism and confirms the six-coordinate nature of the monocyano complex. A good agreement between the rate constants at pH 8 and 9 for the formation of the dicyano complex implies the presence of water in the axial position trans to coordinated cyanide in the monocyano complex and eliminates the existence of Fe(III)(TMPS)(CN)(OH) under the selected reaction conditions. Both Fe(III)(TMPS)(CN)(H(2)O) and Fe(III)(TMPS)(CN)(2) bind nitric oxide (NO) to form the same nitrosyl complex, namely, Fe(II)(TMPS)(CN)(NO(+)). Kinetic studies indicate that nitrosylation of Fe(III)(TMPS)(CN)(2) follows a limiting dissociative mechanism that is supported by the independence of the observed rate constant on [NO] at an appropriately high excess of NO, and the positive values of both the activation parameters ΔS(?) and ΔV(?) found for the reaction under such conditions. The relatively small first-order rate constant for NO binding, namely, (1.54 ± 0.01) × 10(-2) s(-1), correlates with the rate constant for CN(-) release from the Fe(III)(TMPS)(CN)(2) complex, namely, (1.3 ± 0.2) × 10(-2) s(-1) at 20 °C, and supports the proposed nitrosylation mechanism.     

Heterolytic activation of hydrogen as a trigger for iridium complex promoted activation of carbon-fluorine bonds

The cationic iridium(III) complex [IrCF(3)(CO)(dppe)(DIB)][BARF](2) where DIB = o-diiodobenzene, dppe = 1,2-bis(diphenylphosphino)ethane, and BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-) undergoes reaction in the presence of dihydrogen to form [IrH(2)(CO)(2)(dppe)](+) as the major product. Through labeling studies and (1)H and (31)P[(1)H] NMR spectroscopies including parahydrogen measurements, it is shown that the reaction involves conversion of the coordinated CF(3) ligand into carbonyl. In this reaction sequence, the initial step is the heterolytic activation of dihydrogen, leading to proton generation which promotes alpha-C-F bond cleavage. Polarization occurs in the final [IrH(2)(CO)(2)(dppe)](+) product by the reaction of H(2) with the Ir(I) species [Ir(CO)(2)(dppe)](+) that is generated in the course of the CF(3) --> CO conversion.     

Syntheses and chemistry of hypervalent cyclo-R4Sb4, cyclo-(RSbE)n[R = 2-(Me2NCH2)C6H4, E = O, S] and precursors

The cyclostibane R(4)Sb(4)(1)(R = 2-(Me(2)NCH(2))C(6)H(4)) was synthesized by reduction of RSbCl(2) with Mg in THF or with Na in liquid NH(3). The reaction of 1 with [W(CO)(5)(THF)] gives the stibinidene complex RSb[W(CO)(5)](2)(2). RSbCl(2) and (RSbCl)(2)E [E = O (6), E = S (8)] react with KOH or Na(2)S in toluene/water to give the heterocycles (RSbE)(n)[E = O, n= 3 (3); E = S, n= 2 (4)]. The chalcogeno-bridged compounds of the type (RSbCl)(2)E [E = O (6), E = S (8)] were synthesized by reaction of RSbCl(2) with KOH or Na(2)S in toluene/water, but also by reaction of RSbCl(2) with the heterocycles (RSbE)(n). The compounds (RSbI)(2)O (7) and (RSbBr)(2)S (9) were prepared via halogen-exchange reactions between (RSbCl)(2)E and NaI (E = O) or KBr (E = S) or by reactions between RSbI(2) and KOH or RSbBr(2) and Na(2)S. The reaction of cyclo-(RSbS)(2) with W(CO)(5)(THF) in THF results in trapping of the cis isomer in cyclo-(RSbS)(2)[W(CO)(5)](5). The solution behaviour of the compounds was investigated by (1)H and (13)C NMR spectroscopy. The molecular structures of compounds 1-7 and 9 were determined by single-crystal X-ray diffraction.     

Reaction paths of tautomerization between hydroxypyridines and pyridones

Tautomerization paths of 2(and 4)-hydroxypyridine (called here HP) to 2(and 4)-pyridone (called here PY) with water molecules were investigated by the use of density functional theory calculations. Potential energies were compared for a number of water molecules. The 2-HP molecule was found to be isomerized most readily and concertedly to the 2-PY one via proton relays with two water molecules. The reaction pattern is invariant even when outer water molecules are added. The 4-HP(H(2)O)(n) --> 4-PY(H(2)O)(n) reaction model did not give small activation energies. However, a reaction of (4-HP)(2)(H(2)O)(2) --> (4-PY)(2)(H(2)O)(2) was found to occur readily through a transient ion-pair intermediate. The conversion processes of (2-PY)(2) to the tautomerization reacting system were discussed. The hydrogen-bond directionality regulates the tautomerization paths.     

Syntheses and structures of dinuclear gold(I) dithiophosphonate complexes and the reaction of the dithiophosphonate complexes with phosphines: diverse coordination types

The dinuclear gold(I) dithiophosphonate complex, [Au(2)(dtp)(2)] (1), where dtp = [S(2)P(R)(OR')](-) with R = p-C(6)H(4)OCH(3); R'= c-C(5)H(9), has been synthesized and its reaction studied with the phosphine ligands PPh(3) and Ph(2)P(CH(2))(n)PPh(2) (n = 1-4). Compound 1 contains two gold atoms homobridged by the anionic dithiophosphonate ligand, forming an eight-membered ring complex in a chair form. After the reaction of 1 with diphosphine ligands, the dinuclear open-ring complexes Au(2)(dppm)(dtp)(2) (2), Au(2)(dppe)(dtp)(2) (3), Au(2)(dppp)(dtp)(2) (4), Au(2)(dppb)(dtp)(2) (5) were formed (dppm = diphenylphosphinomethane; dppe = diphenylphosphinoethane; dppp = diphenylphosphinopropane; dppb = diphenylphosphinobutane). The reaction with dppm is stoichiometry-dependent. Thus, when 1 reacts with 2 equiv of dppm, the ionic complex [Au(2)(dppm)(2)(dtp)]dtp forms. This dtp counterion was exchanged with tetrafluoroborate to yield [Au(2)(dppm)(2)(dtp)]BF(4), the crystallization of which afforded two interconvertible isomers, 6-yellow and 7-white. Reaction of 1 with PPh(3) affords the tetracoordinate mononuclear complex [Au(dtp)(PPh(3))(2)] (8). The molecular structures of 1-8 were confirmed by X-ray crystallography and show multiple coordination modes and geometries. The crystal structures of 1 and its reaction products with dppm (2, 6, 7) show short intramolecular Au.Au aurophilic bonding interactions of 2.95-3.10 A while no intermolecular interactions were discernible. However, reaction products of 1 with longer-chain Ph(2)P(CH(2))(n)PPh(2) ligands, n = 2-4, exhibit structures that lack both intra- and intermolecular Au.Au interactions.     

Diphosphines possessing electronically different donor groups: synthesis and coordination chemistry of the unsymmetrical Di(N-pyrrolyl)phosphino-functionalized dppm analogue Ph2PCH2P(NC4H4)2

The unsymmetrical diphosphinomethane ligand Ph(2)PCH(2)P(NC(4)H(4))(2) L has been prepared from the reaction of Ph(2)PCH(2)Li with PCl(NC(4)H(4))(2). The diphenylphosphino group can be selectively oxidized with sulfur to give Ph(2)P(S)CH(2)P(NC(4)H(4))(2) 1. The reaction of L with [MCl(2)(cod)] (M = Pd, Pt) gives the chelate complexes [MCl(2)(L-kappa(2)P,P')] (2, M = Pd; 3, M = Pt) in which the M-P bond to the di(N-pyrrolyl)phosphino group is shorter than that to the corresponding diphenylphosphino group. However, the shorter Pd-P bond is cleaved on reaction of 2 with an additional 1 equiv of L to give [PdCl(2)(L-kappa(1)P)(2)] 4. Complex 4 reacts with [PdCl(2)(cod)] to regenerate 2, and with [Pd(2)(dba)(3)].CHCl(3) to give the palladium(I) dimer [Pd(2)Cl(2)(mu-L)(2)] 5, which exists in solution and the solid state as a 1:1 mixture of head-to-head (HH) and head-to-tail (HT) isomers. The palladium(II) dimer [Pd(2)Cl(2)(CH(3))(2)(mu-L)(2)] 6, formed by the reaction of [PdCl(CH(3))(cod)] with L, also exists in solution as a mixture of HH and HT isomers, although in this case the HT isomer prevails at low temperature and crystallizes preferentially. Complex 6 reacts with TlPF(6) to give the A-frame complex [Pd(2)(CH(3))(2)(mu-Cl)(mu-L)(2)]PF(6) 7. The reaction of L with [RuCp*(mu(3)-Cl)](4) leads to the dimer [Ru(2)Cp*(2)(mu-Cl)(2)(mu-L)] 8, for which the enthalpy of reaction has been measured. The reaction of L with [Rh(mu-Cl)(cod)](2) gives a mixture of compounds from which the dimer [Rh(2)(mu-Cl)(cod)(2)(mu-L)]PF(6) 9 can be isolated. The crystal structures of 2.CHCl(3), 3.CH(2)Cl(2), 4, 5.(1)/(4)CH(2)Cl(2), 6, 7.2CH(2)Cl(2), 8, and 9.CH(2)Cl(2) are reported.     

Kinetics and mechanisms of bromine chloride reactions with bromite and chlorite ions

Chloride ion catalyzes the reactions of HOBr with bromite and chlorite ions in phosphate buffer (p[H(+)] 5 to 7). Bromine chloride is generated in situ in small equilibrium concentrations by the addition of excess Cl(-) to HOBr. In the BrCl/ClO(2)(-) reaction, where ClO(2)(-) is in excess, a first-order rate of formation of ClO(2) is observed that depends on the HOBr concentration. The rate dependencies on ClO(2)(-), Cl(-), H(+), and buffer concentrations are determined. In the BrCl/BrO(2)(-) reaction where BrCl is in pre-equilibrium with the excess species, HOBr, the loss of absorbance due to BrO(2)(-) is followed. The dependencies on Cl(-), HOBr, H(+), and HPO(4)(2)(-) concentrations are determined for the BrCl/BrO(2)(-) reaction. In the proposed mechanisms, the BrCl/ClO(2)(-) and BrCl/BrO(2)(-) reactions proceed by Br(+) transfer to form steady-state levels of BrOClO and BrOBrO, respectively. The rate constant for the BrCl/ClO(2)(-) reaction [k(Cl)(2)]is 5.2 x 10(6) M(-1) s(-1) and for the BrCl/BrO(2)(-) reaction [k(Br)(2)]is 1.9 x 10(5) M(-1) s(-1). In the BrCl/ClO(2)(-) case, BrOClO reacts with ClO(2)(-) to form two ClO(2) radicals and Br(-). However, the hydrolysis of BrOBrO in the BrCl/BrO(2)(-) reaction leads to the formation of BrO(3)(-) and Br(-).     

Laser photolysis studies of the photochemical reactions of chromium(III) octaethylporphyrin and tetramesitylporphyrin complexes in toluene solution

A nanosecond laser photolysis study was carried out for the Cr(III) porphyrin complexes of 2,3,7,8,12,13,17,18-octaethylporphyrin, [Cr(OEP)(Cl)(L)], and of 5,10,15,20-tetramesitylporphyrin, [Cr(TMP)(Cl)(L)], in toluene containing water and an excess amount of L (L = axial ligand). The laser photolysis generates the triplet excited state of the parent complex as well as a five-coordinate complex, [Cr(porphyrin)(Cl)], produced by the photodissociation of the axial ligand L. The yields for the formation of the triplet state and the photodissociation of L are found to markedly depend on the nature of both L and porphyrin ligand. The five-coordinate [Cr(porphyrin)(Cl)] readily reacts with both H(2)O and L in the bulk solution to give [Cr(porphyrin)(Cl)(H(2)O)] and [Cr(porphyrin)(Cl)(L)], respectively. The axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] is then substituted by the ligand L to regenerate the original complex [Cr(porphyrin)(Cl)(L)]. In principle, the substitution reaction takes place by the dissociative mechanism: the first step is the dissociation of H(2)O from [Cr(porphyrin)(Cl)(H(2)O)], followed by the reaction of the five-coordinate [Cr(porphyrin)(Cl)] with the ligand L to regenerate [Cr(porphyrin)(Cl)(L)]. The rate constants for this ligand substitution reaction are found to exhibit bell-shaped ligand concentration dependence. The detailed kinetic analysis revealed that both ligands L and H(2)O in toluene make a hydrogen bond with the axial H(2)O ligand in [Cr(porphyrin)(Cl)(H(2)O)] to yield dead-end complexes for the substitution reaction. The reaction mechanisms are discussed on the basis of the substituent effects of the porphyrin peripheral groups and the kinetic parameters determined from the temperature dependence of the rate constants.     

Chemistry of palladium phosphinite (PPh(2)(OR)) and phosphonite (P(OPh)(2)(OH)) complexes: catalytic activity in methoxycarbonylation and Heck coupling reactions

The new phosphinite and phosphonite complexes (1-8) are very efficient catalysts for the methoxycarbonylation of iodobenzene and Heck cross-coupling of bromobenzene with butyl acrylate. High catalytic activity of these complexes can be explained by their in situ transformations during the reaction, stimulated by the presence of water, acid (HCl) or base (NEt(3)). Hydrolysis of phosphinite palladium complexes of the form trans-PdCl(2)[PPh(2)(OR)](2) (R = C(6)F(5), 2, (t)Bu 3, or O-menthyl 4) results in the formation of the dimeric complex [mu-ClPd(PPh(2)OH)(PPh(2)O)](2) 5, which is deprotonated by NEt(3), producing a polymeric complex of formula [Pd(P(O)PPh(2))(2)](n) 8. The reverse reaction, protonolysis of 8 with HCl, leads back to 5 and the monomeric complex 5a. The phosphinite complex PdCl(2)[PPh(2)(OBu)](2)1 with a more lipophilic ligand, PPh(2)(OBu), does not undergo hydrolysis under the same conditions. In the reaction of PdCl(2)(cod) with P(OPh)(2)(OH), the new dimer [mu-ClPd(P(OPh)(2)OH)(P(OPh)(2)O)](2) 6 was obtained, whereas reaction of Pd(OAc)(2) with P(OPh)(2)(OH) leads to the polymeric complex [Pd[P(O)(OPh)(2)](2)](n) 7. Protonolysis of 7 with HCl results in the formation of 6.     

The unprecedented bridging coordination mode of 1,1-cyclobutane dicarboxylate (mu-cbdc-O,O') stabilized by intramolecular hydrogen bonds in ruthenium(II) complexes

The 1,1-cyclobutane dicarboxylate ligand (cbdc), that normally binds to metal centres as a chelate (eta(2)-cbdc-O,O'), prefers to bind in an unprecedented bridging fashion (micro-cbdc-O,O') on cationic Ru(ii) centres bearing ancillary ligands (e.g. H(2)O, NH(3)) capable of making intramolecular H-bonds with the non-coordinated oxygen atoms of the carboxylate groups. Thus, the thermodynamic product of the reaction between cis,fac-[RuCl(2)(dmso-S)(3)(dmso-O)]() and cbdc in a number of different reaction conditions is the dinuclear species with two bridging cbdc units fac-[Ru(micro-cbdc-O,O')(dmso-S)(3)(H(2)O)](2) (2). Similarly, reaction of cis,fac-[RuCl(2)(dmso-S)(3)(NH(3))] (3) with cbdc yielded the corresponding dinuclear species fac-[Ru(micro-cbdc-O,O')(dmso-S)(3)(NH(3))](2) (4), in which ammonia occupies the position of the water molecule in 2. Both dinuclear species 2 and 4 were characterized by X-ray crystallography and have an anti geometry with respect to the H(2)O or NH(3) ligands. The results from the X-ray studies are consistent with the NMR spectroscopic data, indicating that the dinuclear structures observed in the solid state are maintained in solution. The mononuclear anionic complex with a chelating cbdc unit, K{fac-[RuCl(eta(2)-cbdc-O,O')(dmso-S)(3)]}(5), was isolated under appropriate conditions form the reaction of 1 with K(2)(cbdc) and was demonstrated to be an intermediate in the formation of 2.