Ruthenium Tris(pyrazolyl)borate Complexes. Part 20 [1]. Synthesis, Characterization, and Reactivity of Neutral Trispyrazolylborate Ruthenium Vinylidene Complexes

The reaction of RuTp(COD)Cl (1) with PPh₂Prⁱ and terminal alkynes HCCR (R=C₆H₅, C₄H₃S, C₆H₄OMe, Fc, C₆H₄–Fc, C₆H₉) affords the neutral vinylidene complexes RuTp(PPh₂Prⁱ) (Cl)(=C=CHR) (2a–2f) in high yields. These complexes do not react with MeOH to give methoxy carbene complexes of the type RuTp(PPh₂Prⁱ)(Cl)(=C(OMe)CH₂R), but react with oxygen to yield the CO complex RuTp(PPh₂R)(Cl)(CO) (3). The structures of 2b, 2f, and 3 have been determined by X-ray crystallography.     

Ruthenium Tris-pyrazolylborate Complexes XVII [1]. Structure and Bonding in a Series of Ruthenium Hydrido-tris-(pyrazolyl)-borate Cyclooctadiene Complexes

Summary.  The complexes RuTp(cod)X (X = Br⁻ (2), I⁻ (3), CN⁻ (4)) have been obtained by the reaction of RuTp(cod)Cl (1) with KX in boiling MeOH in high yields. The cationic complexes [RuTp(cod)(py)]⁺ (5), [RuTp(cod)(dmso)]⁺ (6), and [RuTp(cod)(CH₃CN)]⁺ (7) were prepared as the CF₃SO₃ ⁻ salts by reacting 1 with 1 equivalent of AgCF₃SO₃ in the presence of the respective co-ligand in CH₂Cl₂. The crystal structures of 1, 3, 4, 5, 6, and 7 are reported. Structural features are discussed in conjunction with ¹H, ¹³C, and ¹⁵N NMR spectroscopic data revealing a linear correlation of ¹⁵N chemical shifts and Ru-N (trans to X(L)) bond distances. Received August 31, 2000. Accepted (revised) October 23, 2000     

Immobilization, Characterization, and Preliminary Reactivity Studies of Halfsandwich Ruthenium Complexes on Silica

Summary. The complexes [RuCp(CH₃CN)₂(Ph₂PCH₂CH₂Si(OMe)₃)]PF₆ and [RuCp(CH₃CN) (Ph₂PCH₂CH₂Si(OMe)₃)₂]PF₆ were obtained in good yields by treatment of [RuCp(CH₃CN)₃]PF₆ with 1 and 2 equivs of Ph ₂PCH₂CH₂Si(OMe)₃. Both free Ph ₂PCH₂CH₂Si(OMe)₃ and the two complexes were grafted onto the surface of powdered silica. The surface coverage was determined independently by ³¹P solid state NMR and IR spectroscopy. IR data revealed that for Ph ₂PCH₂CH₂Si(OMe)₃ and the complexes 52, 52, and 18 molecules, respectively, were immobilized per 100nm² of SiO₂ surface. Similar values were obtained from ³¹P MAS NMR measurements. With the immobilized first complex the catalytic redox isomerization of allyl alcohol to propanal has been studied by means of IR spectroscopy and ¹H NMR spectroscopy showing the quantitative formation of aldehyde. While in the first cycle satisfactory turnover numbers were achieved, the subsequent cycles showed only low conversions to aldehyde presumably due to decomposition of the complex. The immobilized second complex was catalytically inactive.Received February 25, 2003; accepted March 24, 2003 Published online August 18, 2003     

Charge Effects in PCP Pincer Complexes of NiII bearing Phosphinite and Imidazol(i)ophosphine Coordinating Jaws: From Synthesis to Catalysis through Bonding Analysis

This contribution reports on a new family of Ni^II pincer complexes featuring phosphinite and functional imidazolyl arms. The proligands ^RPIMC^HOP^R′ react at room temperature with Ni^II precursors to give the corresponding complexes [(^RPIMCOP^R′)NiBr], where ^RPIMCOP^R=κ^P,κ^C,κ^P‐{2‐(R′₂PO),6‐(R₂PC₃H₂N₂)C₆H₃}, R=iPr, R′=iPr ( 3 b , 84 %) or Ph ( 3 c , 45 %). Selective N‐methylation of the imidazole imine moiety in 3 b by MeOTf (OTf=OSO₂CF₃) gave the corresponding imidazoliophosphine [(^iPrPIMIOCOP^iPr)NiBr][OTf], 4 b , in 89 % yield (^iPrPIMIOCOP^iPr=κ^P,κ^C,κ^P‐{2‐(iPr₂PO),6‐(iPr₂PC₄H₅N₂)C₆H₃}). Treating 4 b with NaOEt led to the NHC derivative [(NHCCOP^iPr)NiBr], 5 b , in 47 % yield (NHCCOP^iPr=κ^P,κ^C,κ^C‐{2‐(iPr₂PO),6‐(C₄H₅N₂)C₆H₃)}). The bromo derivatives 3–5 were then treated with AgOTf in acetonitrile to give the corresponding cationic species [(^RPIMCOP^R)Ni(MeCN)][OTf] [R=Ph, 6 a (89 %) or iPr, 6 b (90 %)], [(^RPIMIOCOP^R)Ni(MeCN)][OTf]₂ [R=Ph, 7 a (79 %) or iPr, 7 b (88 %)], and [(NHCCOP^R)Ni(MeCN)][OTf] [R=Ph, 8 a (85 %) or iPr, 8 b (84 %)]. All new complexes have been characterized by NMR and IR spectroscopy, whereas 3 b , 3 c , 5 b , 6 b , and 8 a were also subjected to X‐ray diffraction studies. The acetonitrile adducts 6 – 8 were further studied by using various theoretical analysis tools. In the presence of excess nitrile and amine, the cationic acetonitrile adducts 6 – 8 catalyze hydroamination of nitriles to give unsymmetrical amidines with catalytic turnover numbers of up to 95.     

Platinum Indolylphosphine Fluorido and Polyfluorido Complexes: An Interplay between Cyclometallation,Fluoride Migration,and Hydrogen Bonding

The reaction of [PtCl₂(COD)] (COD=1,5-cyclooctadiene) with diisopropyl-2-(3-methyl)indolylphosphine (iPr₂P(C₉H₈N)) led to the formation of the platinum(ii ) chlorido complexes, cis-[PtCl₂{iPr₂P(C₉H₈N)}₂] ( 1 ) and trans-[PtCl₂{iPr₂P(C₉H₈N)}₂] ( 2 ). The cis-complex 1 reacted with NEt₃ yielding the complex cis-[PtCl{κ²-(P,N)-iPr₂P(C₉H₇N)}{iPr₂P(C₉H₈N)}] ( 3 ) bearing a cyclometalated κ²-(P,N)-phosphine ligand, while the isomer 2 with a trans-configuration did not show any reactivity towards NEt₃. Treatment of 1 or 3 with (CH₃)₄NF (TMAF) resulted in the formation of the twofold cyclometalated complex cis-[Pt{κ²-(P,N)-iPr₂P(C₉H₇N)}₂] ( 4 ). The molecular structures of the complexes 1–4 were determined by single-crystal X-ray diffraction. The fluorido complex cis-[PtF{κ²-(P,N)-iPr₂P(C₉H₇N)}{iPr₂P(C₉H₈N)}] ⋅ (HF)₄ ( 5 ⋅ (HF)₄) was formed when complex 4 was treated with different hydrogen fluoride sources. The Pt(ii ) fluorido complex 5 ⋅ (HF)₄ exhibits intramolecular hydrogen bonding in its outer coordination sphere between the fluorido ligand and the NH group of the 3-methylindolyl moiety. In contrast to its chlorido analogue 3 , complex 5 ⋅ (HF)₄ reacted with CO or the ynamide 1-(2-phenylethynyl)-2-pyrrolidinone to yield the complexes trans-[Pt(CO){κ²-(P,C)-iPr₂P(C₉H₇NCO)}{iPr₂P(C₉H₈N)}][F(HF)₄] ( 7 ) and a complex, which we suggest to be cis-[Pt{C=C(Ph)OCN(C₃H₆)}{κ²-(P,N)-iPr₂P(C₉H₇N)}{iPr₂P(C₉H₈N)}][F(HF)₄] ( 9 ), respectively. The structure of 9 was assigned on the basis of DFT calculations as well as NMR and IR data. Hydrogen bonding of HF and NH to fluoride was proven to be crucial for the existence of 7 and 9 .     

Synthesis and Anticancer Activity of Long-Chain Isonicotinic Ester Ligand-Containing Arene Ruthenium Complexes and Nanoparticles

Arene ruthenium complexes containing long-chain N-ligands L¹ = NC₅H₄–4-COO–C₆H₄–4-O–(CH₂)₉–CH₃ or L² = NC₅H₄–4-COO–(CH₂)₁₀–O–C₆H₄–4-COO–C₆H₄–4-C₆H₄–4-CN derived from isonicotinic acid, of the type [(arene)Ru(L)Cl₂] (arene = C₆H₆, L = L¹: 1; arene = p-MeC₆H₄Pr ⁱ , L = L¹: 2; arene = C₆Me₆, L = L¹: 3; arene = C₆H₆, L = L²: 4; arene = p-MeC₆H₄Pr ⁱ , L = L²: 5; arene = C₆Me₆, L = L²: 6) have been synthesized from the corresponding [(arene)RuCl₂]₂ precursor with the long-chain N-ligand L in dichloromethane. Ruthenium nanoparticles stabilized by L¹ have been prepared by the solvent-free reduction of 1 with hydrogen or by reducing [(arene)Ru(H₂O)₃]SO₄ in ethanol in the presence of L¹ with hydrogen. These complexes and nanoparticles show a high anticancer activity towards human ovarian cell lines, the highest cytotoxicity being obtained for complex 2 (IC₅₀ = 2 μM for A2780 and 7 μM for A2780cisR).     

Bimetallic Rare Earth Alkyl Complexes Bearing Bridged Amidinate Ligands: Synthesis and Activity for L-Lactide Polymerization

Four novel bridged‐amidines H₂L {1,4‐R¹[C(=NR²)(NHR²)]₂ [R¹=C₆H₄, R²=2,6‐ⁱPr₂C₆H₃ (H₂L¹); R¹=C₆H₄, R²=2,6‐Me₂C₆H₃ (H₂L²); R¹=C₆H₁₀, R²=2,6‐ⁱPr₂C₆H₃ (H₂L³); R¹=C₆H₁₀, R²=2,6‐Me₂C₆H₃ (H₂L⁴)]} were synthesized in 65%–78% isolated yields by the condensation reaction of dicarboxylic acid with four equimolar amounts of amines in the presence of PPSE at 180°C. Alkane elimination reaction of Ln(CH₂SiMe₃)₃(THF)₂ (Ln=Y, Lu) with 0.5 equiv. of amidine in THF at room temperature afforded the corresponding bimetallic rare earth alkyl complexes (THF)(Me₃SiCH₂)₂LnL¹Ln(CH₂SiMe₃)₂(THF) [Ln=Y ( 1 ), Lu ( 2 )], (THF)(Me₃SiCH₂)₂LnL²Ln‐ (CH₂SiMe₃)₂(THF) [Ln=Y ( 3 ), Lu ( 4 )], (THF)(Me₃SiCH₂)₂YL³Y(CH₂SiMe₃)₂(THF) ( 5 ), (THF)(Me₃SiCH₂)₂YL⁴‐ Y(CH₂SiMe₃)₂(THF) ( 6 ) in 72% –80% isolated yields. These neutral complexes showed activity towards L‐lactide polymerization in toluene at 70°C to give high molecular weight (M>10⁴) and narrow molecular weight distribution (M_w/M_n≦1.40) polymers     

Synthese,Struktur und Photochemie von Olefiniridium(I)‐Komplexen mit Acetylacetonatoliganden

Synthesis, Structure, and Photochemical Behavior of Olefine Iridium(I) Complexes with Acetylacetonato Ligands The bis(ethene) complex [Ir(κ²‐acac)(C₂H₄)₂] ( 1 ) reacts with tertiary phosphanes to give the monosubstitution products [Ir(κ²‐acac)(C₂H₄)(PR₃)] ( 2 – 5 ). While 2 (R = iPr) is inert toward PiPr₃, the reaction of 2 with diphenylacetylene affords the π‐alkyne complex [Ir(κ²‐acac)(C₂Ph₂)(PiPr₃)] ( 6 ). Treatment of [IrCl(C₂H₄)₄] with C‐functionalized acetylacetonates yields the compounds [Ir(κ²‐acacR^1,2)(C₂H₄)₂] ( 8 , 9 ), which react with PiPr₃ to give [Ir(κ²‐acacR^1,2)(C₂H₄)(PiPr₃)] ( 10 , 11 ) by displacement of one ethene ligand. UV irradiation of 5 (PR₃ = iPr₂PCH₂CO₂Me) and 11 (R² = (CH₂)₃CO₂Me) leads, after addition of PiPr₃, to the formation of the hydrido(vinyl)iridium(III) complexes 7 and 12 . The reaction of 2 with the ethene derivatives CH₂=CHR (R = CN, OC(O)Me, C(O)Me) affords the compounds [Ir(κ²‐acac)(CH₂=CHR)(PiPr₃)] ( 13 – 15 ), which on photolysis in the presence of PiPr₃ also undergo an intramolecular C–H activation. In contrast, the analogous complexes [Ir(κ²‐acac)(olefin)(PiPr₃)] (olefin = (E)‐C₂H₂(CO₂Me)₂ 16 , (Z)‐C₂H₂(CO₂Me)₂ 17 ) are photochemically inert.     

A Nickel Complex Containing a Pyramidalized,Ambiphilic Pincer Germylene Ligand

Reaction of N-heterocyclic carbene (NHC)-stabilized PGeP-type germylene Ge{o-(PiPr₂)C₆H₄}₂⋅^MeIiPr ( 1 ) (^MeIiPr=1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene) with Ni(cod)₂ gave pincer germylene complex Ni[Ge{o-(PiPr₂)C₆H₄}₂](^MeIiPr) ( 2 ), in which the Ge center of 2 is significantly pyramidalized. Theoretical calculation on 2 predicted the ambiphilicity of the germanium center, which was confirmed by reactivity studies. Thus, complex 2 reacted with both Lewis base ^MeIMe (^MeIMe=1,3,4,5-tetramethylimidazol-2-ylidene) and Lewis acid BH₃⋅SMe₂ at the germanium center to afford the adducts Ni[Ge{o-(PiPr₂)C₆H₄}₂⋅^MeIMe](^MeIiPr) ( 3 ) and Ni[Ge{o-(PiPr₂)C₆H₄}₂⋅BH₃](^MeIiPr) ( 4 ), respectively. Furthermore, the former was slowly converted to dinuclear complex Ni₂[Ge{o-(PiPr₂)C₆H₄}₂]₂(^MeIMe)₂ ( 5 ) at room temperature. Complex 5 can be regarded as a dimer of the ^MeIMe analog of 2 with a Ni-Ge-Ge-Ni linkage.     

A Capped Octahedral MHC6 Compound of a Platinum Group Metal

A MHC₆ complex of a platinum group metal with a capped octahedral arrangement of donor atoms around the metal center has been characterized. This osmium compound OsH{κ²‐C,C‐(PhBIm‐C₆H₄)}₃, which reacts with HBF₄ to afford the 14 e^? species [Os{κ²‐C,C‐(PhBIm‐C₆H₄)}(Ph₂BIm)₂]BF₄ stabilized by two agostic interactions, has been obtained by reaction of OsH₆(PiPr₃)₂ with N,N′‐diphenylbenzimidazolium chloride ([Ph₂BImH]Cl) in the presence of NEt₃. Its formation takes place through the C,C,C‐pincer compound OsH₂{κ³‐C,C,C‐(C₆H₄‐BIm‐C₆H₄)}(PiPr₃)₂, the dihydrogen derivative OsCl{κ²‐C,C‐(PhBIm‐C₆H₄)}(η²‐H₂)(PiPr₃)₂, and the five‐coordinate osmium(II) species OsCl{κ²‐C,C‐(PhBIm‐C₆H₄)}(PiPr₃)₂.     

Syntheses and Molecular Structure of Dinuclear Transition Metal Complexes Bridged by Dipyridylamine Derivative Ligands

Stable dinuclear transition metal complexes,[(η⁶‐C₆H₆)₂Ru₂(L1)Cl₂]²⁺ ( 1 ), [(η⁶‐p‐iPrC₆H₄Me)₂Ru₂(L1)Cl₂]²⁺ ( 2 ), [(η⁶‐C₆Me₆)₂Ru₂(L1)Cl₂]²⁺ ( 3 ), [(η⁶‐C₆H₆)₂Ru₂(L2)Cl₂]²⁺ ( 4 ),[(η⁶‐p‐iPrC₆H₄Me)₂Ru₂(L2)Cl₂]²⁺ ( 5 ), [(η⁶‐C₆Me₆)₂Ru₂(L2)Cl₂]²⁺ ( 6 ), [(η⁵‐C₅Me₅)₂Rh₂(L1)Cl₂]²⁺ ( 7 ), [(η⁵‐C₅Me₅)₂Ir₂(L1)Cl₂]²⁺ ( 8 ),[(η⁵‐C₅Me₅)₂Rh₂(L2)Cl₂]²⁺ ( 9 ), and [(η⁵‐C₅Me₅)₂Rh₂(L2)Cl₂]²⁺ ( 10 ), with the bis‐bidentate ligands 1,3‐bis(di‐2‐pyridylaminomethyl)benzene (L1) and 1,4‐bis(di‐2‐pyridylaminomethyl)benzene (L2), which contain two chelating dipyridylamine units connected by an aromatic spacer, were synthesized. The cationic dinuclear complexes were isolated as their hexafluorophosphate salts and characterized by using a combination of NMR, IR, and UV/Vis spectroscopic methods and mass spectrometry. The solid‐state structure of complex 8 as a representative was determined by X‐ray structure analysis.     

The Synthesis,Characterization and Dehydrogenation of Sigma‐Complexes of BN‐Cyclohexanes

The coordination chemistry of the 1,2‐BN‐cyclohexanes 2,2‐R₂‐1,2‐B,N‐C₄H₁₀ (R₂=HH, MeH, Me₂) with Ir and Rh metal fragments has been studied. This led to the solution (NMR spectroscopy) and solid‐state (X‐ray diffraction) characterization of [Ir(PCy₃)₂(H)₂(η²η²‐H₂BNR₂C₄H₈)][BAr^F₄] (NR₂=NH₂, NMeH) and [Rh(iPr₂PCH₂CH₂CH₂PiPr₂)(η²η²‐H₂BNR₂C₄H₈)][BAr^F₄] (NR₂=NH₂, NMeH, NMe₂). For NR₂=NH₂ subsequent metal‐promoted, dehydrocoupling shows the eventual formation of the cyclic tricyclic borazine [BNC₄H₈]₃, via amino‐borane and, tentatively characterized using DFT/GIAO chemical shift calculations, cycloborazane intermediates. For NR₂=NMeH the final product is the cyclic amino‐borane HBNMeC₄H₈. The mechanism of dehydrogenation of 2,2‐H,Me‐1,2‐B,N‐C₄H₁₀ using the {Rh(iPr₂PCH₂CH₂CH₂PiPr₂)}⁺ catalyst has been probed. Catalytic experiments indicate the rapid formation of a dimeric species, [Rh₂(iPr₂PCH₂CH₂CH₂PiPr₂)₂H₅][BAr^F₄]. Using the initial rate method starting from this dimer, a first‐order relationship to [amine‐borane], but half‐order to [Rh] is established, which is suggested to be due to a rapid dimer–monomer equilibrium operating.     

Synthesis,Characterization and Crystal Structures of New Difurylphosphido-bridged Dinuclear Ruthenium Carbonyl Complexes Derived from Ferrocenylacetylene Ligands

The difurylphosphido-bridged dinuclear complex [Ru₂(CO)₆(μ-PFu₂)(μ-η¹,η²-Fu)] (Fu = 2-furyl) 1 readily reacts with two equivalents of each of the terminal alkynes HC≡CR (R = Fc, p-C₆H₄Fc, p-C₆H₄NO₂, Fc = Fe(η⁵-C₅H₅)(η⁵-C₅H₄)) by an interesting head-to-tail ynyl coupling with a furan group to form a series of phosphido-bridged diruthenium compounds containing a novel furyl-substituted C₄ hydrocarbyl chain of stoichiometry [Ru₂(CO)₄(μ-PFu₂){μ-η¹,η¹,η²,η³-RCC(H)C(R)C(H)Fu}] (R = Fc 2, p-C₆H₄Fc 3, p-C₆H₄NO₂ 4) in moderate to good yields. Reaction of 1 with an equimolar amount of HC≡CFc and HC≡C(p-C₆H₄NO₂) afforded a pair of isomers of [Ru₂(CO)₄(μ-PFu₂){μ-η¹,η¹,η²,η³-R¹CC(H)C(R²)C(H)Fu}] (R¹ = Fc, R² = p-C₆H₄NO₂ 5a; R¹ = p-C₆H₄NO₂, R² = Fc 5b) together with a small mixture of 4. X-ray crystal structures of 2, 3, 5a and 5b are reported. All of these new alkyne-derived dinuclear complexes are electron precise with 34 cluster valence electrons in which the μ-η¹,η²-furyl ligand acts as a three-electron donor and the μ-phosphido Ru₂ framework is retained in the products upon alkyne coupling reactions. The resulting organic fragment of each complex is coordinated to the Ru atoms via a π, a π-allyl and two σ bonds, and donates seven electrons to the metal core. Dedicated to the memory of Professor F. Albert Cotton.     

A one-pot method to prepare the carbene complex [TpRhCl2(CHNiPr2)] from [TpRh(CO)2], CHCl3, and NHiPr2

The complex [Tp^Me₂,ClRh(CO)₂] reacts with chloroform to give quantitatively the rhodium(III) complex [Tp^Me₂,ClRhCl(CHCl₂)(CO)] resulting from the oxidative addition of a C-Cl bond. Further reaction with diisopropylamine gives the aminocarbene complex [Tp^Me₂,ClRhCl₂(CHNiPr₂)], whose X-ray crystal structure has been solved. Addition of an excess of diisopropylamine to [Tp^Me₂,ClRh(CO)₂] in chloroform provides directly [Tp^Me₂,ClRhCl₂(CHNiPr₂)].     

Bis(β‐diketiminato) lanthanide amides: synthesis,structure and catalysis for the polymerization of l‐lactide and ε‐caprolactone

Treatment of the chlorides (L^2,6‐iPr2_Ph)₂LnCl (L^2,6‐iPr2_Ph = [(2,6‐ⁱPr₂C₆H₃)NC(Me)CHC(Me)N(C₆H₅)]^?) with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃) afforded the monoamides (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Y ( 1 ), Yb ( 2 )) in good yields. Anhydrous LnCl₃ reacted with 2 equiv. of NaL^2,6‐iPr2_Ph in THF, followed by treatment with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃), giving the analogues (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Sm ( 3 ), Nd ( 4 )). Two monoamido complexes stabilized by two L^2‐Me ligands, (L^2‐Me)₂LnNH(2,6‐ⁱPr₂C₆H₃) (L^2‐Me = [N(2‐MeC₆H₄)C(Me)]₂CH)^?; Ln = Y ( 5 ), Yb ( 6 )), were also synthesized by the latter route. Complexes 1 , 2 , 3 , 4 , 5 , 6 were fully characterized, including X‐ray crystal structure analyses. Complexes 1 , 2 , 3 , 4 , 5 , 6 are isostructural. The central metal in each complex is ligated by two β‐diketiminato ligands and one amido group in a distorted trigonal bipyramid. All the complexes were found to be highly active in the ring‐opening polymerization of L‐lactide (L‐LA) and ε‐caprolactone (ε‐CL) to give polymers with relatively narrow molar mass distributions. The activity depends on both the central metal and the ligand (Yb < Y < Sm ≈ Nd and L^2‐Me < L^2,6‐iPr2_Ph). Remarkably, the binary 3/benzyl alcohol (BnOH) system exhibited a striking ‘immortal’ nature and proved able to quantitatively convert 5000 equiv. of L‐LA with up to 100 equiv. of BnOH per metal initiator. All the resulting PLAs showed monomodal, narrow distributions (M_w/M_n = 1.06 ? 1.08), with molar mass (M_n) decreasing proportionally with an increasing amount of BnOH. The binary 4/BnOH system also exhibited an ‘immortal’ nature in the polymerization of ε‐CL in toluene. Copyright © 2014 John Wiley & Sons, Ltd.     

Rare‐Earth‐Metal Methyl,Amide, and Imide Complexes Supported by a Superbulky Scorpionate Ligand

The reaction of monomeric [(Tp^tBu,Me)LuMe₂] (Tp^tBu,Me=tris(3‐Me‐5‐tBu‐pyrazolyl)borate) with primary aliphatic amines H₂NR (R=tBu, Ad=adamantyl) led to lutetium methyl primary amide complexes [(Tp^tBu,Me)LuMe(NHR)], the solid‐state structures of which were determined by XRD analyses. The mixed methyl/tetramethylaluminate compounds [(Tp^tBu,Me)LnMe({μ₂‐Me}AlMe₃)] (Ln=Y, Ho) reacted selectively and in high yield with H₂NR, according to methane elimination, to afford heterobimetallic complexes: [(Tp^tBu,Me)Ln({μ₂‐Me}AlMe₂)(μ₂‐NR)] (Ln=Y, Ho). X‐ray structure analyses revealed that the monomeric alkylaluminum‐supported imide complexes were isostructural, featuring bridging methyl and imido ligands. Deeper insight into the fluxional behavior in solution was gained by ¹H and ¹³C NMR spectroscopic studies at variable temperatures and ¹H–⁸⁹Y HSQC NMR spectroscopy. Treatment of [(Tp^tBu,Me)LnMe(AlMe₄)] with H₂NtBu gave dimethyl compounds [(Tp^tBu,Me)LnMe₂] as minor side products for the mid‐sized metals yttrium and holmium and in high yield for the smaller lutetium. Preparative‐scale amounts of complexes [(Tp^tBu,Me)LnMe₂] (Ln=Y, Ho, Lu) were made accessible through aluminate cleavage of [(Tp^tBu,Me)LnMe(AlMe₄)] with N,N,N′,N′‐tetramethylethylenediamine (tmeda). The solid‐state structures of [(Tp^tBu,Me)HoMe(AlMe₄)] and [(Tp^tBu,Me)HoMe₂] were analyzed by XRD.     

Cycloadditionsreaktionen von Organometall-Komplexen : XV. [2 + 31- und [2 + 1]-Cycloadditionsreaktionen von Carbonylrhodium- und Carbonylcobalt-Komplexen mit Nitriloxiden und Aziden. Die Kristall- und Molekülstruktur von C5H5(PPr3) (C6H5)

The reaction of C₅H₅Rh(CO)(PⁱPr₃) (1] which is prepared from C₅H₅Rh(CO)₂ and neat P¹Pr₃, with the nitriloxides 2-RC₆H₄CNO (R = H, Cl) leads to the formation of the metallaheterocycles C₅H₅(P¹Pr₃) ) (2, 3) in 90–95% yield. Compound 1 reacts with tosylazide to give the C,N-bound isocyanate complex C₅ H₅(PⁱPr₃)Rh(η²-TosN=C=O) (6). Analogously, on treatment of C₅Me₅Co(CO)(PMe₃) with phenylazide the phenylisocyanate derivative C₅Me₅(PMe₃)Co(η²-PhN=C=O) (7) is formed. Protonation of 7 with CF₃CO ₂H affords the non-ionic carbamoylcobalt complex C₅Me₅(PMe₃)Co[C(O)NHPh](O₂CCF₃) (8). The X-ray structural analysis of 2 reveals the presence of an almost planar heterocycle in which the two Rh-C distances differ by 0.045 Å     

Der Dihydridoiridium(III)‐Komplex [IrH2Cl(PiPr3)2] als Molekülbaustein für unsymmetrische Rhodium–Iridiumund Iridium–Iridium‐Zweikernverbindungen

The Dihydridoiridium(III) Complex [IrH₂Cl(P i Pr₃)₂] as a Molecular Building Block for Unsymmetrical Binuclear Rhodium–Iridium and Iridium–Iridium Compounds The title compound [IrH₂Cl(PiPr₃)₂] ( 3 ) reacts with the chloro‐bridged dimers [RhCl(PiPr₃)₂]₂ ( 1 ) and [IrCl(C₈H₁₄)(PiPr₃)]₂ ( 5 ) by cleavage of the Cl‐bridges to give the unsymmetrical binuclear complexes 4 and 6 with Rh(μ‐Cl)₂Ir and Ir(μ‐Cl)₂Ir as the central building block. The reactions of 3 with the bis(cyclooctene) and (1,5‐cyclooctadiene) compounds [MCl(C₈H₁₄)₂]₂ ( 7 , 8 ) and [MCl(η⁴‐C₈H₁₂)]₂ ( 9 , 10 ) (M = Rh, Ir) occur analogously and afford the rhodium(I)‐iridium(III) and iridium(I)‐iridium(III) complexes 11 – 14 in 70–80% yield. Treatment of [(η⁴‐C₈H₁₂)M(μ‐Cl)₂IrH₂(PiPr₃)₂] ( 13 , 14 ) with phenylacetylene leads to the formation of the substitution products [(η⁴‐C₈H₁₂)M(μ‐Cl)₂IrH(C≡CPh)(PiPr₃)₂] ( 15 , 16 ) without changing the central molecular core. Similarly, the compound [(η⁴‐C₈H₁₂)Rh(μ‐Br)₂IrH(C≡CPh)(PiPr₃)₂] ( 18 ) has been prepared; it was characterized by X‐ray crystallography.     

Accessing Cationic α-Silylated and α-Germylated Phosphorus Ylides

The synthesis and full characterization of α-silylated (α-SiCPs; 1 – 7 ) and α-germylated (α-GeCPs; 11 – 13 ) phosphorus ylides bearing one chloride substituent R₃PC(R¹)E(Cl)R²₂ (R=Ph; R¹=Me, Et, Ph; R²=Me, Et, iPr, Mes; E=Si, Ge) is presented. The molecular structures were determined by X-ray diffraction studies. The title compounds were applied in halide abstraction studies in order to access cationic species. The reaction of Ph₃PC(Me)Si(Cl)Me₂ ( 1 ) with Na[B(C₆F₅)₄] furnished the dimeric phosphonium-like dication [Ph₃PC(Me)SiMe₂]₂[B(C₆F₅)₄]₂ ( 8 ). The highly reactive, mesityl- or iPr-substituted cationic species [Ph₃PC(Me)SiMes₂][B(C₆F₅)₄] ( 9 ) and [Ph₃PC(Et)SiiPr₂][B(C₆F₅)₄] ( 10 ) could be characterized by NMR spectroscopy. Carrying out the halide abstraction reaction in the sterically demanding ether iPr₂O afforded the protonated α-SiCP [Ph₃PCH(Et)Si(Cl)iPr₂][B(C₆F₅)₄] ( 6 dec ) by sodium-mediated basic ether decomposition, whereas successfully synthesized [Ph₃PC(Et)SiiPr₂][B(C₆F₅)₄] ( 10 ) readily cleaves the F−C bond in fluorobenzene. Thus, the ambiphilic character of α-SiCPs is clearly demonstrated. The less reactive germanium analogue [Ph₃PC(Me)GeMes₂][B{3,5-(CF₃)₂C₆H₃}₄] ( 14 ) was obtained by treating 11 with Na[B{3,5-(CF₃)₂C₆H₃}₄] and fully characterized including by X-ray diffraction analysis. Structural parameters indicate a strong C_Ylide−Ge interaction with high double bond character, and consequently the C−E (E=Si, Ge) bonds in 9 , 10 and 14 were analyzed with NBO and AIM methods.     

[Ni(NHC)2] as a Scaffold for Structurally Characterized trans [H−Ni−PR2] and trans [R2P−Ni−PR2] Complexes

The addition of PPh₂H, PPhMeH, PPhH₂, P(para-Tol)H₂, PMesH₂ and PH₃ to the two-coordinate Ni⁰ N-heterocyclic carbene species [Ni(NHC)₂] (NHC=IiPr₂, IMe₄, IEt₂Me₂) affords a series of mononuclear, terminal phosphido nickel complexes. Structural characterisation of nine of these compounds shows that they have unusual trans [H−Ni−PR₂] or novel trans [R₂P−Ni−PR₂] geometries. The bis-phosphido complexes are more accessible when smaller NHCs (IMe₄>IEt₂Me₂>IiPr₂) and phosphines are employed. P−P activation of the diphosphines R₂P−PR₂ (R₂=Ph₂, PhMe) provides an alternative route to some of the [Ni(NHC)₂(PR₂)₂] complexes. DFT calculations capture these trends with P−H bond activation proceeding from unconventional phosphine adducts in which the H substituent bridges the Ni−P bond. P−P bond activation from [Ni(NHC)₂(Ph₂P−PPh₂)] adducts proceeds with computed barriers below 10 kcal mol⁻¹. The ability of the [Ni(NHC)₂] moiety to afford isolable terminal phosphido products reflects the stability of the Ni−NHC bond that prevents ligand dissociation and onward reaction.