Simultaneous Determination of Aromatic Amines by Liquid Chromatography Coupled with Carbon Nanotubes/Poly (3-methylthiophene) Modified Dual-Electrode

Liquid chromatography with amperometric detection (LC-AD) is developed and applied to simultaneously determine five aromatic amines. In the LC-AD, a new carbon nanotubes/poly(3-methylthiophene) modified dual-electrode is fabricated and then used as the working electrode. It is found that this chemically modified electrode (CME) exhibits efficiently electrocatalytic oxidation for aromatic amines with relatively high sensitivity, stability and long-life. Thus, lower detection in LC-AD can be achieved, which are 4.0 × 10^–8 mol L^–1 for aniline, 1.6 ×10^–7 mol L^–1 for 4-nitroaniline, 1.0 × 10^–7 mol L^–1 for 4-chloroaniline, 1.5 × 10^–7 mol L^–1 for 1-naphthylamine, 1.7 × 10^–7 mol L^–1 for 2-bromoaniline. The recoveries of the five analytes are also determined, which range between 0.95 and 1.05 for drinking water, 0.86 and 1.10 for the LiWa River water.     

Electroanalytical chemistry of metal complexes with S-containing ligands

Summary The main types of electrochemical reactions of complexes in organic and mixed solvents are considered. Fast electrochemical reactions (k _s=n×10^–2 cm · s^–1) were used to reduce the minimal concentrations (c _min) in a.c. voltammetry. The role of pre- and post-chemical reactions in the formation of the analytical signal in extraction voltammetry is elucidated. The principles of the influence of the special structure of the complexes on their redox properties are determined using complexes of the transition metals with phosphorus dithioacids and bidentate heterocyclic amines. The features of the electrooxidation and electroreduction of inert complexes of the platinum metals with heterocyclic dithioacids and organic sulphides in nonaqueous media are discussed. The products of the electrochemical reaction of these compounds in protic media catalyze the hydrogen evolution on the mercury electrode. Kinetic data of the chelate formation are used for developing highly selective methods for the determination of the platinum metals with c _min=2×10^–9–5×10^–8 mol/l.

---

Elektrochemische Reaktionen von Komplexen mit S-haltigen Liganden

     

Kinetics of Chlorohydrination of Allyl Chloride

The chlorohydrination of allyl chloride with chlorine in water was studied at 20–80°C. The effect of the concentration of chloride ions within the range 0–3.6 mol/l on the selectivity of formation of glycerol dichlorohydrins was studied. An equation that relates the selectivity and the concentration of Cl^–was derived, which adequately describes experimental data. The schemes of parallel and consecutive reactions occurring in the system were suggested. The ratios between the rate constants of the following reactions were found: the reactions of chlorine with water and allyl chloride dissolved in water (k ₁/k ₄= 4.1 × 10^–4), the reaction of allyl chloride with hypochlorous acid and the decomposition of hypochlorous acid (k ₂/k ₃= 1.7 × 10³), and the reactions of the allyl chloride–chlorine complex with a water molecule and Cl^–(k ₅/k ₆= 2.9 × 10^–2).     

Primary amine drug sensitive electrodes based on macrocyclic polyethers with 2,2′-dinaphthyl subunits

Dinaphthyl macrocyclic polyethers were synthesized and used as neutral carriers for preparing primary amine drug sensitive PVC membrane electrodes. Contrary to the ion-associate based electrodes, which show an excellent potentiometric response to quaternary ammonium ions and the like, but a very poor response to primary amines, the macrocyclic polyether-based electrodes showed potentiometric response characteristics with primary amines preferred. Dinaphthyl macrocyclic polyether-based electrodes are superior to those based on common macrocyclic polyethers for their potentiometric selectivity coefficients much lower than those of the latter. The main characteristics of a dinaphthyl-20-crown-6-based benzyl amine sensitive electrode are as follows: linear response range, 4.2 × 10^–5 – 1.0 ×10^–1 M; slope, 51.3 mV/decade; and detection limit, 4.6 × 10^–6 M. A mexiletine sensitive electrode was prepared using dinaphthyl-23-crown-7 with following performance features: linear response range, 2.0 × 10^–5 – 1.0 ×10^–1 M; slope, 52.1mV/decade; and detection limit, 5.0 × 10^–6 M.     

Kinetics and mechanism of ligand substitution of mono(polyamine)-nickel(II) complexes with 4-(2-pyridylazo)resorcinol

Summary The kinetics and mechanism of ligand substitution reactions of tetraethylenepentamine nickel(II), Ni (Teren), and triethylenetetraamine nickel(II), Ni(Trien), with 4-(2-pyridylazo)resorcinol (parH₂) have been studied spectrophotometrically at I=0.1 M (NaClO₄) at 25°C. In both systems two distinct reaction steps are observed. The rapid first step follows the rate law d[Ni(Polyamine)(ParH₂)]/dt=k₁ [Ni(Polyamine)] [ParH₂]. The formation of ternary complexes of Ni (Polyamine) with ParH₂ has been investigated under second order equal concentration conditions. The values of second order rate constants for the Trien and Teren reactions are (2.1±0.2)×10⁴ M^–1s^–1 and (7.8±0.6)×10³ M^–1s^–1 respectively at pH=9.0, I=0.1 M and 25°C.The rate law for the second step may be written as d[Ni(Par)₂]/dt=k₂[Ni(Polyamine)(ParH₂)]. Values of k₂ for the Trien and Teren systems are (2.5±0.1)×10^–4 s^–1 and (4.76±0.3)×10^–5 s^–1 respectively.     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.     

Preparation and characterization of a codeine responsive electrode

Summary The behaviour of codeine reineckate and codeine tetraphenylborate membrane electrodes has been observed with a respectiveNernstian response of 58 and 56 mV/decade for 9.3×10^–5–1.3×10^–3 M codeine sulfate solutions. The workingpH ranges were 5–8 and 4–8, respectively. The selectivity towards sugars, amines, amino acids, cations, and some pharmaceutical compounds was found to be satisfactory. The isothermal temperature coefficient was 0.0014 V/°C. The electrodes were applied successfully for the determination of codeine in some pharmaceutical dosage forms with a relative standard deviation range of 0.16–0.30% and an average recovery of 98.6±0.6%.

---

Herstellung und Charakterisierung einer codeinselektiven Elektrode

Zusammenfassung Das Verhalten von Codeinreineckat- und Codeintetraphenylboratmembranelektroden in 9.3×10^–5–1.3×10^–3 M Codeinsulfatlösungen wurde untersucht (Nernstscher Response: 58 bzw. 56 mV/Dekade). Der verwendetepH-Bereich für die beiden Elektroden war 5–8 bzw. 4–8. Ihre Selektivität gegenüber Zuckern, Aminen, Aminosäuren, Kationen und einigen pharmazeutisch aktiven Verbindungen ist zufriedenstellend. Der isotherme Temperaturkoeffizient beträgt 0.0014V/°C. Die Elektroden wurden erfolgreich zur Bestimmung von Codein in einigen pharmazeutischen Präparaten eingesetzt (relative Standardabweichung: 0.16–0.30%).

     

The effect of high pressure on the ion pair equilibrium constant of alkali metal fluorides: A spectrophotometric study

Bromophenol blue indicator was used in UV-visible spectrophotometric measurements to study ion association constants of alkali metal fluorides. The equilibrium constants for the ion pair formation of the alkali metal fluorides were determined as a function of ionic strength at one atmosphere pressure and 25°C. The effect of pressure on these association constants was measured at a constant total ionic strength of 1.0 mol-kg^–1 over a pressure range of 1 to 2000 atmospheres at 25°C. The pressure dependences of the stoichiometric association constants of the alkali metal fluorides are given by: lnK _LiF ^* =0.77–2.47×10^–4P–2.12×10^–8P²; lnK _NaF ^* =0.53–1.08×10^–4P–1.66×10^–8P²; lnK _KF ^* =0.24–4.41×10^–5P–7.15×10^–8P²; lnK _RbF ^* =–0.17–8.65×10^–5P–4.51×10^–8P²; and lnK _CsF ^* = –0.37–1.14×10^–4P–6.82×10^–8P², where P is the pressure in atmospheres. The stoichiometric molar volume and compressibility changes for ion pair formation of the alkali metal fluorides were evaluated from the pressure dependence of K _MF ^* data. The thermodynamic association constants were also calculated making use of activity coefficient data from the Pitzer equations. The partial molal volume and compressibility changes for ion pair formation of each alkali metal fluoride are reported.     

Pulsed Corona Discharge-Induced Reactions of Acetophenone in Water

The reactions of acetophenone in water by pulsed corona discharges have been investigated to provide fundamental information concerning the reactions of acetophenone in water. Experimental results indicated that photolysis of acetophenone did not involve a hydroxyl radical mechanism and the majority flux of hydroxyl radicals originated from the dissociation of gas-phase oxygen in the plasma channels. The rate constants for photolysis and pyrolysis were determined to be 1.5×10^–7 M-s^–1, 2.2×10^–4 s^–1, respectively. The rate constant for the oxidative reactions was measured as 1.2×10^–7 M-s^–1. Results from this study support the proposal that acetophenone degradation reaction proceed through the oxidative reaction pathway, where molecular oxygen accelerates acetophenone degradation, photolysis, and pyrolysis pathways.     

The kinetics and mechanism of the oxidation of DL ethionine and thiourea by potassium ferrate

The kinetics of the reaction between ethionine and thiourea were investigated under pseudo and non-pseudo-first-order conditions. Ethionine was oxidized to the sulfoxide within 500 s and thiourea was oxidized to urea within 10 s. Above a pH of ca. 8.5 the reaction was first-order in the concentration of the organosulfur compound, the hydrogen ions and the ferrate ions, whereas, below this pH, the kinetics were independent of the hydrogen ion concentration. A possible mechanism for both compounds is initial protonation of the ferrate ion followed by the two electron rate-determining step of addition of oxygen to the organosulfur compound. The kinetic parameters for ethionine compare favorably with those for similar compounds, whereas thiourea tends to be more active. The rate constant for the rate-determining step is 4.1 × 10² M^–1 s^–1 for ethionine and 4.1 × 10³ M^–1 s^–1 for thiourea.     

Spectrophotometric determination of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3- H-indol-2-ylidene)propenyl]-3 H-indolium

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of manganese in sewage. The method is based on the reaction of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3-H-indol-2-ylidene)propenyl]-3H-indolium to form a colored ion associate with a sensitive absorption maximum at 560 nm. The appropriate reaction conditions have been established: pH 8.5–10.0, 1.25–2.3×10^–3 mol L^–1 1-nitroso-2-naphthol, and 1.6–2.4×10^–4 mol L^–1 dye reagent. Beer's law is obeyed for manganese concentrations up to 4.2 mg L^–1. The limit of detection is 0.01 mg L^–1 Mn²⁺; the molar absorptivity of the ion associate was 7.5×10⁴ L mol^–1 cm^–1. The effect of various foreign ions was examined. A reaction mechanism is suggested. The developed procedure was tested for determination of manganese in sewage with satisfactory precision and accuracy.     

A flow-injection ultrafiltration sampling chemiluminescence system for on-line determination of drug–protein interaction

A flow-injection ultrafiltration sampling chemiluminescence system for on-line determination of cimetidine–bovine serum albumin (BSA) interaction is proposed in this paper. Cimetidine can be oxidized by N-bromosuccinimide (NBS) and sensitized by fluorescein to produce high chemiluminescence emission in basic media. The concentration of cimetidine is linear with the CL intensity in the range 3×10^–7–1×10^–4 mol L^–1 with a detection limit of 1×10^–7 mol L^–1 (3). The drug and protein were mixed in different molar ratios in 0.067 mol L^–1 phosphate buffer, pH 7.4, and incubated at 37 °C in a water bath. The ultrafiltration probe was utilized to sample the mixed solution at a flow rate of 5 µL min^–1. The data obtained by the proposed ultrafiltration flow-injection chemiluminescence method was analyzed with Scrathard analysis and a Klotz plot. The estimated association constant (K) and the number of the binding site (n) on one molecule of BSA by Scrathard analysis and Klotz plot were 3.15×10⁴ L mol^–1 and 0.95, 3.25×10⁴ L mol^–1 and 0.92, respectively. The proposed system proved that flow-injection chemiluminescence analysis coupled with on-line ultrafiltration sampling is a simple and reliable technique for the study of drug–protein interaction.     

The electrochemistry and determination of Ligustrazine hydrochloride

Ligustrazine is one of the active ingredients contained in Ligusticum chuanxiong Hort. (Umbelliferae), which is widely used in traditional Chinese medicine for the treatment of cardiovascular problems. In this work, the electrochemistry of Ligustrazine hydrochloride (LZC) and its determination are investigated. The detection limit is estimated to be 8.0×10^–8 M, with three linear ranges from 1.0×10^–6 to 1.0×10^–4 M, 1.0×10^–4 to 5.0×10^–4 M, and 6.5×10^–4 to 1.6×10^–3 M. The method has been proved to be highly sensitive, selective, and stable, and has been successfully applied to determining LZC in LZC injections.     

Enhancing effect of DNA on chemiluminescence from the decomposition of hydrogen peroxide catalyzed by copper(II)

In the absence of any special luminescence reagent, emission of weak chemiluminescence has been observed during the decomposition of hydrogen peroxide catalyzed by copper(II) in basic aqueous solution. The intensity of the chemiluminescence was greatly enhanced by addition of DNA and was strongly dependent on DNA concentration. Based on these phenomena, a flow-injection chemiluminescence method was established for determination of DNA. The chemiluminescence intensity was linear with DNA concentration in the range 2×10^–7–1×10^–5 g L^–1 and the detection limit was 4.1×10^–8 g L^–1 (S/N=3). The relative standard deviation was less than 3.0% for 4×10^–7 g L^–1 DNA (n=11). The proposed method was satisfactorily applied for determination of DNA in synthetic samples. The possible mechanism of the CL reaction is discussed.     

Transference numbers for ultra concentrated solutions of aqueous hydrochloric acid at 25°C

Transference numbers of HCl(aq) solutions at 25°C, from 0.01 to 13.6 mol-kg^–1(m) have been obtained by measuring the emf of cells with transference using hydrogen gas/platinum electrodes. Good agreement is obtained at concentrations up to 1 m with all previous data, and our results strongly corroborate those of King and Spiro over the 2–8m concentration range. The transference numbers of the hydronium ion fit the empirical equation, _H ^HCl = 0.821 + 0.0457m ^1/2 – 2.476×10^–2m – 1.90×10^–4 m ² – 1.45×10^–5 m ³ the maximum deviation in T _H ^HCl being 0.003.     

Effect of using mixed ion-pairs on PVC-membrane electrodes for ephedrine

Mixed ion-pairs based on the use of ephedrinium (EPH)-TPB plus EPH-reineckate (II) and phenylephrine-TPB plus EPH-reineckate (III) were tried for use in plastic membranes. The results were compared to those of an EPH-reineckate (I) single ion-pair electrode. The Nernstian slopes were 50, 49 and 55 mV decade^–1 for membranes I, II and III, respectively. The linear concentration ranges were 10^–5–10^–1, 4.0 × 10^–5–10^–1 and 6.3 ×^–5–10^–1 M ephedrine. The detection limits were 4 ×^–6,10^–5 and 1.2 × 10^–5 M ephedrine for membranes I, II and III, respectively. The pH ranges were 4–9, 3–9 and 2–8 for I, II and III-membranes, respectively. Selectivity coefficient values for membrane II were better than those for membranes I and III. The effects of increasing KC1 concentration and temperature changes were explained for the three electrodes. The isothermal temperature coefficients were 0.00145, 0.0007 and 0.00055 V/ °C for electrodes I, II and III. Electrode III was applied for the determination of ephedrine in its pharmeaceutical preparations with an overall relative standard deviation range of 1.3–2.4% and an overall mean recovery value of 98.1%.     

Researches on 1, 2, 4-triazoles

Determination of the acidity constants of 1-aryltetrazolinethiones-5, 4-aryl-1, 2, 4-triazolinethiones-3, 1-aryltetrazolinones-5, 4-aryl-1, 2, 4-triazolinones-3 shows that carbonyl compounds are 10^–1–10^–2 times less acid than compounds with a thione group. Acidities are found to increase considerably, 10³–10⁴ times, on passing from triazole compounds to tetrazole ones. 4-Aryl-1, 2, 4-triazolinones-3 and 1-aryl-tetrazolinones-5 are aminomethylated and cyanoethylated and the reactions found to take place at the amide nitrogen atom.For Part VI see [1].     

Gas-phase reactions in plasmas of SF6 with O2 in He

Processes which occur in microwave discharges of dilute mixtures of SF₆ and O₂ in He have been examined using a flow reactor sampled by a mass spectrometer. Two classes of experiments were performed. In the first set of experiments, mixtures containing 6×10¹¹ cm^–3 SF₆, 6×10¹⁶ cm^–3 He, and O₂ in the range (0–3.6)×10¹³ cm^–3 were passed through a 20-W 2450-MHz microwave discharge. The gas mixtures arriving at a sample point downstream from the discharge were examined for SF₆, SF₄, SOF₂, SOF₄, SO₂F₂, SO₂, F, and O. In the second class of experiments, rate coefficients were measured for the reactions of SF₄ with O and O₂ and for the reaction of SF with O. The rate coefficient for the reaction of SF with O was found to be (4.2±1.5)×10^–11 cm^–3 s^–1. SF₄ was found to react so slowly with both oxygen atoms and oxygen molecules that only upper limits could be placed on the rate coefficients for these reactions. These values were 2×10^–14 cm³ s^–1 and 5×10^–15 cm³ s^–1 for reactions with O and O₂ respectively. The observed distribution of products from the discharged mixtures is discussed in terms of the measured rate coefficients.     

Gas-phase reactions of SF5, SF2, and SOF with O(3 P): Their significance in plasma processing

Reactions of both SF₅ and SF₂ with O(³ P) and molecular oxygen have been studied at 295 K in a gas flow reactor sampled by a mass spectrometer. For reactions with O(³ P), rate coefficients of (2.0±0.5)×10^–11 cm³ s^–1 and (10.8±2.0)×10^–11 cm³ s^–1 were obtained for SF₅ and SF₂ respectively. The rate coefficients for reactions with O₂ are orders of magnitude lower, with an estimated upper limit of 5×10^–16 cm³ s^–1 for both SF₅ and SF₂. Reaction of SF₂ with O(³ P) leads to the production of SOF which then reacts with O(³ P) with a rate coefficient of (7.9±2.0)×10^–11 cm³ s^–1. Both SO and SO₂ are products in the reaction sequence initiated by reaction between SF₂ and O(³ P). Although considerable uncertainty exists for the heat of formation of SOF, it appears that SO arises only from reaction between SOF and O atoms which is also the source of SO₂. These results are discussed in terms of a reaction scheme proposed earlier to explain processes occurring during the plasma etching of Si in SF₆/O₂ plasmas. A comparison between the results obtained here and those reported earlier for reactions of both CF₃ and CF₂ with O and O₂ shows that there is a marked similarity in the free radical chemistry which occurs in SF₆/O₂ and CF₄/O₂ plasmas.     

Determination of Selenium(IV) by Stripping Voltammetry at a Mercury-Film Electrode

A procedure was proposed for the determination of selenium(IV) by stripping voltammetry on a mercury-film electrode at an electrolysis potential of +0.4 V versus the saturated silver–silver chloride reference electrode in a 1 M H₂SO₄ solution. The current of the cathodic peak is a linear function of the selenium(IV) concentration in the range from 5 × 10^–3 to 3 × 10^–1 mg/L (6.3 × 10^–8 to 3.8 × 10^–6 M) at a time of electrolysis of 30 s (t _el). The detection limit for selenium is 1 × 10^–4 mg/L (1.3 × 10^–9 M) at t _el = 300 s. It was shown that selenium(IV) can be determined in the presence of 10 mg/L Zn(II), 1 mg/L Cd(II), 0.5 mg/L Pb(II), and 0.2 mg/L Cu(II). A procedure for the determination of selenium in natural, mineral, and potable water was proposed.