Shape‐controlled synthesis of cerium oxide nanoparticles for efficient dye photodegradation and antibacterial activities

Herein, two‐shaped cerium oxide nanoparticles (NPs), that is, spherical and cubical, were synthesized through hydrothermal approach by tuning reaction temperatures. The morphology and structural and chemical composition of both samples were characterized by transmission electron microscopy (TEM), high‐resolution TEM (HRTEM), X‐ray diffraction (XRD), and X‐ray photoelectron spectroscopy (XPS), respectively. Both types of NPs were subjected to photodegradation of industrial dye, methylene blue, under dark, sunlight, and UV irradiation, and their recyclability and reusability were also assessed. Besides, the effect of pH, concentration of NPs, and dye on degradability was also analyzed. The cubical‐shaped NPs demonstrated superior degradation of ~70% under UV irradiation than the spherical ones (<50%). The antibacterial activities of both NPs were also examined, and cubical‐shaped NPs were found to exhibit superior antimicrobial potential (zone of inhibition [ZOI]: 25.75 ± 0.25, 18.83 ± 0.76, 15.75 ± 0.66, and 15.75 ± 0.25 mm) in comparison with the spherical ones (ZOI: 19.41 ± 0.94, 14.25 ± 0.66, 12.58 ± 1.01, and 9.91 ± 1.01 nm) for Escherichia coli, Pseudomonas aeruginosa, Bacillus subtilis, and Staphylococcus aureus respectively with reduced growth and viable count. This difference in performance may be attributed to the higher surface areas of cubical‐shaped NPs and higher content of oxygen vacancies. The results presented in this study suggest that cubical NPs are excellent candidates for treating industrial wastewater with greater reproducibility. Moreover, they can be used as active growth inhibitors against different microorganisms and thus can be extremely useful in developing medical devices and to design various antimicrobial systems.     

Performance of hematite particles as an Iron source for the degradation of ornidazole in photo-fenton process

Journal of Sol-Gel Science and Technology - Hematite (α-Fe2O3) particles with varying morphology (rods, spherical, and cubical shapes) were synthesized using sol–gel procedure by...     

Star‐like polyfluorenes based on 2,4,6,8, 10,12‐hexabenzyl‐2,4,6,8,10,12‐hexaazaisowurtzitane caged‐core: toward non‐aggregating,blue‐light‐emitting polymers

Multi‐functionality compound 2,4,6,8,10,12‐hexa(p‐bromo)‐benzyl‐2,4,6,8,10,12‐hexaazaiso‐wurtzitane (Br‐HBIW) was synthesized and used for the core of star‐like polymers. Star‐like polyfluorene based on 2,4,6,8,10,12‐hexabenzyl‐2,4,6,8,10,12‐hexaazaisowurtzitane (HBIW) caged‐core was synthesized by Suzuki coupling method. The comparative studies between the star‐like polyfluorene and the linear polyfluorene based on UV–Vis and photoluminescence (PL) spectra revealed that the bulky HBIW cage could reduce the chain aggregation and π–π interaction, so brought about improved PL quantum efficiency and annealing PL stability. Such results could be owed to the successful suppression of excimers formation, which originated from the incorporation of the HBIW cage and star‐like architecture. Copyright © 2009 John Wiley & Sons, Ltd.     

Preparation of polymeric vesicles through ultrasonic treatment of poly(styrene‐block‐2‐vinylpyridine) micelles under alkaline conditions

An approach for the preparation of block copolymer vesicles through ultrasonic treatment of polystyrene‐block‐poly(2‐vinyl pyridine) (PS‐b‐P2VP) micelles under alkaline conditions is reported. PS‐b‐P2VP block copolymers in toluene, a selective solvent for PS, form spherical micelles. If a small amount of NaOH solution is added to the micelles solution during ultrasonic treatment, organic‐inorganic Janus‐like particles composed of the PS‐b‐P2VP block copolymers and NaOH are generated. After removal of NaOH, block copolymer vesicles are obtained. A possible mechanism for the morphological transition from spherical micelles to vesicles or Janus‐like particles is discussed. If the block copolymer micelles contain inorganic precursors, such as FeCl₃, hybrid vesicles are formed, which may be useful as biological and chemical sensors or nanostructured templates. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 953–959     

Three‐arm star block copolymers of aromatic polyether and polystyrene from chain‐growth condensation polymerization,atom transfer radical polymerization,and click reaction

Well‐defined (AB)₃ type star block copolymer consisting of aromatic polyether arms as the A segment and polystyrene (PSt) arms as the B segment was prepared using atom transfer radical polymerization (ATRP), chain‐growth condensation polymerization (CGCP), and click reaction. ATRP of styrene was carried out in the presence of 2,4,6‐tris(bromomethyl)mesitylene as a trifunctional initiator, and then the terminal bromines of the polymer were transformed to azide groups with NaN₃. The azide groups were converted to 4‐fluorobenzophenone moieties as CGCP initiator units by click reaction. However, when CGCP was attempted, a small amount of unreacted initiator units remained. Therefore, the azide‐terminated PSt was then used for click reaction with alkyne‐terminated aromatic polyether, obtained by CGCP with an initiator bearing an acetylene unit. Excess alkyne‐terminated aromatic polyether was removed from the crude product by means of preparative high performance liquid chromatography (HPLC) to yield the (AB)₃ type star block copolymer (M_n = 9910, M_w/M_n = 1.10). This star block copolymer, which contains aromatic polyether segments with low solubility in the shell unit, exhibited lower solubility than A₂B or AB₂ type miktoarm star copolymers. In addition, the obtained star block copolymer self‐assembled to form spherical aggregates in solution and plate‐like structures in film. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of Sheet‐like Polymer‐Encapsulated Composite Particles by Seeded Polymerization from Sub‐micrometer Sheets

Seeded polymerization has been widely used to fabricate polymer‐encapsulated inorganic particles (IPs). The most frequently used seeds are spherical, whereas nonspherical particles are not well documented. Recently, sheet‐like IPs have attracted much attention in the context of polymer composites. This article is therefore dedicated to understanding seeded polymerization from submicron sheets and focuses on the control of the overall morphology of the composite particles obtained. However, it was found that the composite particles only maintained the sheet‐like morphology of the seeds at a low polymer content, whereas they became hamburger‐like at a high polymer content owing to minimization of the interfacial energy. Interestingly, when cross‐linked, the sheet‐like morphology could be well preserved, even at a rather high polymer content. With the encapsulating polymer layer, the obtained sheet‐like composite particles showed improved compatibility with the polymer matrix and could be well dispersed in polymer matrix when simply blended.     

“Schizomorphic” Emulsion Copolymerization Particles

Cryo‐electron microscopy, atomic force microscopy, and light microscopy investigations provide experimental evidence that amphiphilic emulsion copolymerization particles change their morphology in dependence on concentration. The shape of the particles is spherical at solids content above 1%, but it changes to rod‐like, ring‐like, and web‐like structures at lower concentrations. In addition, the shape and morphology of these particles at low concentrations are not fixed but very flexible and vary with time between spheres, flexible pearl–necklace structures, and stretched rods.     

Synthesis,characterization, and fluorescence of pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer with pentaerythritol core

Novel and well‐defined pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymers were successfully achieved by combination of esterification, atom transfer radical polymerization (ATRP), divergent reaction, ring‐opening polymerization (ROP), and coupling reaction on the basis of pentaerythritol. The reaction of pentaerythritol with 2‐bromopropionyl bromide permitted ATRP of styrene (St) to form four‐arm star‐shaped polymer (PSt‐Br)₄. The molecular weights of these polymers could be adjusted by the variation of monomer conversion. Eight‐hydroxyl star‐shaped polymer (PSt‐(OH)₂)₄ was produced by the divergent reaction of (PSt‐Br)₄ with diethanolamine. (PSt‐(OH)₂)₄ was used as the initiator for ROP of ε‐caprolactone (CL) to produce eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL)₂)₄. The molecular weights of (PSt‐b‐(PCL)₂)₄ increased linearly with the increase of monomer. After the coupling reaction of hydroxyl‐terminated (PSt‐b‐(PCL)₂)₄ with 1‐pyrenebutyric acid, pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer (PSt‐b‐(PCL‐pyrene)₂)₄ was obtained. The eight‐arm star‐shaped dendrimer‐like copolymers presented unique thermal properties and crystalline morphologies, which were different from those of linear poly(ε‐caprolactone) (PCL). Fluorescence analysis indicated that (PSt‐b‐(PCL‐pyrene)₂)₄ presented slightly stronger fluorescence intensity than 1‐pyrenebutyric acid when the pyrene concentration of them was the same. The obtained pyrene‐containing eight‐arm star‐shaped dendrimer‐like copolymer has potential applications in biological fluorescent probe, photodynamic therapy, and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2788–2798, 2008     

纳米硫化铜颗粒自组装为球、空心球和线形结构

用水和乙二醇混合物为溶剂,应用溶剂热合成方法制备了由纳米颗粒自组装的球、空心球和线形结构的铜的硫化物,如 Cu7S4, Cu1.8S, Cu1.81S 和 Cu2S。 考查了溶剂组成（水含量的变化）、反应时间、实验温度的变化对所制备样品的形貌和物相结构的影响。研究了其形成机理。结果表明,随着反应时间的变化,首先形成纳米颗粒的铜的硫化物。通过自组装形成线形结构。最后转化为球形或空心球形结构。     

The polymerization of acrylonitrile in miniemulsions: “Crumpled latex particles” or polymer nanocrystals

Stable dispersions of polyacrylonitrile (PAN) nanoparticles in the size range between 100 nm < d < 180 nm were made by polymerization in miniemulsion and characterized by dynamic light scattering, transmission electron microscopy (TEM), and wide angle X‐ray scattering (WAXS). Due to the insolubility of the polymer in its monomer, such particles are not accessible by classical emulsion polymerization. The pure PAN particles are composed of ca. 10 nm large polymer nanocrystals, i. e., the formed polymer precipitates and crystallizes direct after formation. As a consequence, the final latexes do not adopt spherical shape, but show a well defined, narrowly distributed boulder‐like phenotype which is called “crumpled latexes”. Copolymerization with styrene results in a continuous transition between the crumpled and a smooth spherical morphology, which is again related to a decreased degree of crystallinity.     

Synthesis,self‐assembly and recognition properties of biomimetic star‐shaped poly(ε‐caprolactone)‐b‐glycopolymer block copolymers

Biomimetic star‐shaped poly(ε‐caprolactone)‐b‐poly(gluconamidoethyl methacrylate) block copolymers (SPCL‐PGAMA) were synthesized from the atom transfer radical polymerization (ATRP) of unprotected GAMA glycomonomer using a tetra(2‐bromo‐2‐methylpropionyl)‐terminated star‐shaped poly(ε‐caprolactone) (SPCL‐Br) as a macroinitiator in NMP solution at room temperature. The block length of PGAMA glycopolymer within as‐synthesized SPCL‐PGAMA copolymers could be adjusted linearly by controlling the molar ratio of GAMA glycomonomer to SPCL‐Br macroinitiator, and the molecular weight distribution was reasonably narrow. The degree of crystallization of PCL block within copolymers decreased with the increasing block length ratio of outer PGAMA to inner PCL. Moreover, the self‐assembly properties of the SPCL‐PGAMA copolymers were investigated by NMR, UV‐vis, DLS, and TEM, respectively. The self‐assembled glucose‐installed aggregates changed from spherical micelles to worm‐like aggregates, then to vesicles with the decreasing weight fraction of hydrophilic PGAMA block. Furthermore, the biomolecular binding of SPCL‐PGAMA with Concanavalin A (Con A) was studied by means of UV‐vis, fluorescence spectroscopy, and DLS, which demonstrated that these SPCL‐PGAMA copolymers had specific recognition with Con A. Consequently, this will not only provide biomimetic star‐shaped SPCL‐PGAMA block copolymers for targeted drug delivery, but also improve the compatibility and drug release properties of PCL‐based biomaterials for hydrophilic peptide drugs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 817–829, 2008     

Synthesis of linear and star‐like poly(ε‐caprolactone)‐b‐poly{γ‐2‐[2‐(2‐methoxy‐ethoxy)ethoxy]ethoxy‐ε‐caprolactone} amphiphilic block copolymers using zinc undecylenate

Linear and star‐like amphiphilic diblock copolymers were synthesized by the ring‐opening polymerization of ε‐caprolactone and γ‐2‐[2‐(2‐methoxyethoxy)ethoxy]ethoxy‐ε‐caprolactone monomers using zinc undecylenate as a catalyst. These polymers have potential applications as micellar drug delivery vehicles, therefore the properties of the linear and 4‐arm star‐like structures were examined in terms of their molecular weight, viscosity, thermodynamic stability, size, morphology, and drug loading capacity. Both the star‐like and linear block copolymers showed good thermodynamic stability and degradability. However, the star‐like polymers were shown to have increased stability at lower concentrations with a critical micelle concentration (CMC) of 5.62 × 10^?4 g L^?1, which is less than half the concentration of linear polymer needed to form micelles. The star‐like polymeric micelles showed smaller sizes when compared with their linear counterparts and a higher drug loading capacity of doxorubicin, making them better suited for drug delivery purposes. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3601–3608     

Synthesis,characterization, and properties of tunable thermosensitive amphiphilic dendrimer‐star copolymers with Y‐shaped arms

Novel and well‐defined amphiphilic dendrimer‐star copolymer poly(ε‐caprolactone)‐block‐(poly(2‐(2‐methoxyethoxy)ethylmethacrylate‐co‐oligo(ethylene glycol) methacrylate))₂ with Y‐shaped arms were synthesized by the combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The investigation of thermal properties and the analysis of crystalline morphology indicate that the high‐branched structure of dendrimer‐star copolymers with Y‐shaped arms and the presence of amorphous P(MEO₂MA‐co‐OEGMA) segments together led to the complete destruction of crystallinity of the PCL segments in the dendrimer‐star copolymer. In addition, the hydrophilicity–hydrophobicity transition of the dendrimer‐star copolymer film can be achieved by altering the external temperatures. The amphiphilic copolymers can self‐assemble into spherical nanomicelles in water. Because the lower critical solution temperature of the copolymers can be adjusted by varying the ratio of MEO₂MA and OEGMA, the tunable thermosensitive properties can be observed by transmittance, dynamic laser light scattering, and transmission electron microscopy (TEM). The release rate of model drug chlorambucil from the micelles can be effectively controlled by changing the external temperatures, which indicates that these unique high‐branched amphiphilic copolymers have the potential applications in biomedical field. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Anionic surfactant-templated mesoporous silica (AMS) nano-spheres with radially oriented mesopores

Mesoporous silica nano-spheres with pore size larger than 3 nm were synthesized using an anionic surfactant as the template. These nano-spheres possess centrosymmetric radial mesopores (emanating from the spherical center to the exterior surface) and form stable suspension. The spherical size and mesostructure can be finely tuned by changing the pH value of the synthetic system in the range of 8.8 to 6.4. In addition, when the pH value was decreased to 5.8, instead of spheres, anisotropic morphologies such as elliptical, peanutlike and trifurcate particles were obtained, exhibiting core/shell structure due to the different orientations of the mesopores in the core and the shell of the particles. It is proposed that the evolution of the morphologies and mesostructures of the products templated by anionic surfactants strongly depend on the pH value of the synthetic system.     

Synthesis and characterization of novel resorcinarene‐centered amphiphilic star‐block copolymers consisting of eight ABA triblock arms by combination of ROP,ATRP, and click chemistry

Novel amphiphilic eight‐arm star triblock copolymers, star poly(ε‐caprolactone)‐block‐poly(acrylic acid)‐block‐poly(ε‐caprolactone)s (SPCL‐PAA‐PCL) with resorcinarene as core moiety were prepared by combination of ROP, ATRP, and “click” reaction strategy. First, the hydroxyl end groups of the predefined eight‐arm SPCLs synthesized by ROP were converted to 2‐bromoesters which permitted ATRP of tert‐butyl acrylate (tBA) to form star diblock copolymers: SPCL‐PtBA. Next, the bromide end groups of SPCL‐PtBA were quantitatively converted to terminal azides by NaN₃, which were combined with presynthesized alkyne‐terminated poly(ε‐caprolactone) (A‐PCL) in the presence of Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine in DMF to give the star triblock copolymers: SPCL‐PtBA‐PCL. ¹H NMR, FTIR, and SEC analyses confirmed the expected star triblock architecture. The hydrolysis of tert‐butyl ester groups of the poly(tert‐butyl acrylate) blocks gave the amphiphilic star triblock copolymers: SPCL‐PAA‐PCL. These amphiphilic star triblock copolymers could self‐assemble into spherical micelles in aqueous solution with the particle size ranging from 20 to 60 nm. Their micellization behaviors were characterized by dynamic light scattering and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2905–2916, 2009     

Preparation of poly(ethylene oxide) star polymers and poly(ethylene oxide)–polystyrene heteroarm star polymers by atom transfer radical polymerization

Poly(ethylene oxide) (PEO) star polymer with a microgel core was prepared by atom transfer radical poylmerization (ATRP) of divinyl benzene (DVB) with mono‐2‐bromoisobutyryl PEO ester as a macroinitiator. Several factors, such as the feed ratio of DVB to the initiator, type of catalysts, and purity of DVB, play important roles during star formation. The crosslinked poly(divinyl benzene) (PDVB) core was further obtained by the hydrolysis of PEO star to remove PEO arms. Size exclusion chromatography (SEC) traces revealed the bare core has a broad molecular weight distribution. PEO–polystyrene (PS) heteroarm star polymer was synthesized through grafting PS from the core of PEO star by another ATRP of styrene (St) because of the presence of initiating groups in the core inherited from PEO star. Characterizations by SEC, ¹H NMR, and DSC revealed the successful preparation of the target star copolymers. Scanning electron microscopy images suggested that PEO–PS heteroarm star can form spherical micelles in water/tetrahydrofuran mixture solvents, which further demonstrated the amphiphilic nature of the star polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2263–2271, 2004     

Exploring Redox States,Doping and Ordering of Electroactive Star‐Shaped Oligo(aniline)s

We have prepared a simple star‐shaped oligo(aniline) ( TDPB ) and characterised it in detail by MALDI‐TOF MS, UV/Vis/NIR spectroscopy, time‐dependent DFT, cyclic voltammetry and EPR spectroscopy. TDPB is part of an underdeveloped class of π‐conjugated molecules with great potential for organic electronics, display and sensor applications. It is redox active and reacts with acids to form radical cations. Acid‐doped TDPB shows behaviour similar to discotic liquid crystals, with X‐ray scattering investigations revealing columnar self‐assembled arrays. The combination of unpaired electrons and supramolecular stacking suggests that star‐shaped oligo(aniline)s like TDPB have the potential to form conducting nanowires and organic magnetic materials.     

Hierarchical Self‐Assembled Photo‐Responsive Tubisomes from a Cyclic Peptide‐Bridged Amphiphilic Block Copolymer

Typically, the morphologies of the self‐assembled nanostructures from block copolymers are limited to spherical micelles, wormlike micelles and vesicles. Now, a new generation of materials with unique shape and structures, cylindrical soft matter particles (tubisomes), are obtained from the hierarchical self‐assembly of cyclic peptide‐bridged amphiphilic diblock copolymers. The capacity of obtained photo‐responsive tubisomes as potential drug carriers is evaluated. The supramolecular tubisomes pave an alternative way for fabricating polymeric tubular structures, and will expand the toolbox for the rational design of functional hierarchical nanostructures.     

Multifunctional Cationic PeptoStars as siRNA Carrier: Influence of Architecture and Histidine Modification on Knockdown Potential

RNA interference provides enormous potential for the treatment of several diseases, including cancer. Nevertheless, successful therapies based on siRNA require overcoming various challenges, such as poor pharmacokinetic characteristics of the small RNA molecule and inefficient cytosolic accumulation. In this respect, the development of functional siRNA carrier systems is a major task in biomedical research. To provide such a desired system, the synthesis of 3‐arm and 6‐arm PeptoStars is aimed for. The different branched polypept(o)idic architectures share a stealth‐like polysarcosine corona for efficient shielding and a multifunctional polylysine core, which can be independently varied in size and functionality for siRNA complexation‐, transport and intra cellular release. The special feature of star‐like polypept(o)ides is in their uniform small size (<20 nm) and a core–shell structure, which implies a high stability and stealth‐like properties and thus, they may combine long circulation times and a deep penetration of cancerous tissue. Initial toxicity and complement studies demonstrate well tolerated cationic PeptoStars with high complexation capability toward siRNA (N/P ratio up to 3:1), which can lead to potent RNAi for optimized systems. Here, the synthetic development of 3‐arm and 6‐arm polypept(o)idic star polymers, their modification with endosomolytic moieties, and first in vitro insights on RNA interference are reported on.     

Phase behavior,crystallization, and nanostructures in thermoset blends of epoxy resin and amphiphilic star‐shaped block copolymers

This article reports thermoset blends of bisphenol A‐type epoxy resin (ER) and two amphiphilic four‐arm star‐shaped diblock copolymers based on hydrophilic poly(ethylene oxide) (PEO) and hydrophobic poly(propylene oxide) (PPO). 4,4′‐Methylenedianiline (MDA) was used as a curing agent. The first star‐shaped diblock copolymer with 70 wt % ethylene oxide (EO), denoted as (PPO‐PEO)₄, consists of four PPO‐PEO diblock arms with PPO blocks attached on an ethylenediamine core; the second one with 40 wt % EO, denoted as (PEO‐PPO)₄, contains four PEO‐PPO diblock arms with PEO blocks attached on an ethylenediamine core. The phase behavior, crystallization, and nanoscale structures were investigated by differential scanning calorimetry, transmission electron microscopy, and small‐angle X‐ray scattering. It was found that the MDA‐cured ER/(PPO‐PEO)₄ blends are not macroscopically phase‐separated over the entire blend composition range. There exist, however, two microphases in the ER/(PPO‐PEO)₄ blends. The PPO blocks form a separated microphase, whereas the ER and the PEO blocks, which are miscible, form another microphase. The ER/(PPO‐PEO)₄ blends show composition‐dependent nanostructures on the order of 10?30 nm. The 80/20 ER/(PPO‐PEO)₄ blend displays spherical PPO micelles uniformly dispersed in a continuous ER‐rich matrix. The 60/40 ER/(PPO‐PEO)₄ blend displays a combined morphology of worm‐like micelles and spherical micelles with characteristic of a bicontinuous microphase structure. Macroscopic phase separation took place in the MDA‐cured ER/(PEO‐PPO)₄ blends. The MDA‐cured ER/(PEO‐PPO)₄ blends with (PEO‐PPO)₄ content up to 50 wt % exhibit phase‐separated structures on the order of 0.5–1 μm. This can be considered to be due to the different EO content and block sequence of the (PEO‐PPO)₄ copolymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 975–985, 2006