Selective degradation of lignin and elimination of HO radicals in pulps by O<Subscript>3</Subscript> and UV laser flash irradiation

HO^. radical is an aggressive reagent to abstract hydrogen from diverse substitutes and lead them to degradation, however, in reaction of active oxygen species with lignins, complex phenolic polymers, in dispersed lignocellulose such as pulp for environment-benign delignification, HO^. radicals should be eliminated as more as possible to prevent cellulose from unfavorably concomitant degradation. A reaction system of O₃ is constructed under UV laser flash irradiation, and HO^. radicals are controlled efficiently by it. A new mechanism is proposed, for the first time, that O^. radicals generated from reaction of O₃ with UV laser flash irradiation might be the contributor to scavenge HO^. radicals.     

Electrochemical synthesis of PEDOT derivatives bearing imidazolium‐ionic liquid moieties

Novel poly(3,4‐ethylenedioxythiophene) (PEDOT) polymers bearing imidazolium‐ionic liquid moieties were synthesized by electrochemical polymerizations. For this purpose, new functional monomers were synthesized having an 3,4‐ethylenedioxythiophene (EDOT) unit and an imidazolium‐ionic liquid with different anions such as tetrafluoroborate (BF), bis(trifluoromethane)sulfonimide ((CF₃SO₂)₂N^?), and hexafluorophosphate (PF). Next, polymer films were obtained by electrochemical synthesis in dicholoromethane solutions. Obtained polymers were characterized, revealing the characteristics of PEDOT in terms of electrochemical and spectroelectrochemical properties, FTIR, ¹H NMR, and AFM microscopy. Interestingly, the hydrophobic character of electropolymerized films could be modified depending on the anion type. The hydrophobicity followed the trend PF > (CF₃SO₂)₂N^? > BF > pure PEDOT as determined by water contact angle measurements. Furthermore, the polymers could be dissolved in a range of polar organic solvents such as dimethylformamide, propylene carbonate, and dimethyl sulfoxide making these polymers interesting candidates for wet processing methods. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3010–3021, 2009     

High‐performance Flexible Complementary Electrochromic Device Based on Plasma Modified WO3 Nano Hybrids and V2O5 Nanofilm with Low Operation Voltages

Tungsten trioxide‐poly(3,4‐ethylenedioxythiophene) (WO₃‐PEDOT) and tungsten trioxide‐polyfuran (WO₃‐PFu) were prepared by rf rotating plasma polymerization. Electrochromic hybrid thin films were fabricated onto flexible polyethylene terephthalate (PET)/ indium tin oxide (ITO) film using electron beam evaporation method. In order to deeply characterize all films, scanning electron microscopy‐energy dispersive X‐ray spectroscopy (SEM‐EDS) and electrochemical impedance spectroscopy (EIS) techniques were used. The counter electrode effect on plasma modified WO₃ nano hybrids‐based electrochromic devices (ECDs) was evaluated. By incorporating flexible vanadium pentoxide (V₂O₅) film as counter electrode, complementary ECDs were constructed through combining the hybrid flexible films (WO₃‐PEDOT, WO₃‐PFu) as working electrodes, which exhibit highly efficient electrochromic performance with low voltage operation. Especially, WO₃‐PEDOT/V₂O₅‐based ECD owns a high optical modulation of 61.5 % at 750 nm driven by −1.0 V (coloration) and +1 V (bleaching) with fast response times (coloration time: 13.58 s, bleaching time: 8.07 s) and a high coloration efficiency of 527 cm² C⁻¹. This study can supply useful and efficient avenue for designing flexible complementary electrochromic device for energy‐saving flexible electronics.     

A platform to synthesize a soluble poly(3,4‐ethylenedioxythiophene) analogue

Alkyl‐substituted polyhedral oligomeric silsesquioxane (POSS) cage is combined with 3,4‐ethylenedioxythiophene under the same roof. The corresponding monomer called EDOT‐POSS is used to get soluble poly(3,4‐ethylenedioxythiophene) (PEDOT‐POSS) analogue. Both chemically and electrochemically obtained polymers are soluble in common organic solvents like dichloromethane, chloroform, tetrahydrofuran, and so forth. The PEDOT‐POSS has somewhat higher band gap (1.71 eV at 618 nm) than its parent PEDOT (1.60 eV at 627 nm) and as expected the PEDOT‐POSS exhibits higher optical contrast (74% at 618 nm) and coloration efficiency (582 cm²/C for 100% switching), lower switching time (0.9 s), higher electrochemical stability (93% of its electroactivity retains after 5000 cycles under ambient conditions) when compared to the PEDOT. A number of advantages of the PEDOT‐POSS over the PEDOT can make it a promising material in the areas of electro‐optical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3935–3941     

Room temperature polymerization of poly(3,4‐ethylenedioxythiophene) as transparent counter electrodes for dye‐sensitized solar cells

Poly(3,4‐ethylenedioxythiophene) (PEDOT) counter electrode is prepared with in situ polymerization of 3,4‐ethylenedioxythiophene on a fluorine‐doped tin oxide over‐layer glass at room temperature. The cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization are measured to evaluate the catalytic activity of PEDOT counter electrode for I₃^?/I^? redox couple. Comparing the data with that of traditional thermal decomposed Pt counter electrode, it is found that PEDOT has higher catalytic activity than that of Pt counterpart. Power conversion efficiency of the dye‐sensitized solar cell (DSC) with PEDOT counter electrode can attain to 7.713%, a little higher than that of the cell with Pt counter electrode (7.300%). Taking the advantage of high transparency of PEDOT counter electrode, an Ag mirror is put on the back side of PEDOT counter electrode of the DSC to reflect light back for power conversion. Power conversion efficiency of the DSC with this special structure can be further enhanced to 8.359%, which mainly stems from the improved short‐circuit current density by the increased irradiated light intensity. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of additives and post‐treatment on the thermoelectric performance of vapor‐phase polymerized PEDOT films

Vapor‐phase polymerization (VPP) is an important method for the fabrication of high‐quality conducting polymers, especially poly(3,4‐ethylenedioxythiophene) (PEDOT). In this work, the effects of additives and post‐treatment solvents on the thermoelectric (TE) performance of VPP‐PEDOT films were systematically investigated. The use of 1‐butyl‐3‐menthylinidazolium tetrafluoroborate ([BMIm][BF₄], an ionic liquid) was shown to significantly enhance the electrical conductivity of VPP‐PEDOT films compared with other additives. The VPP‐PEDOT film post‐treated with mixed ethylene glycol (EG)/[BMIm][BF₄] solvent displayed the high power factor of 45.3 μW m^?1 K^?2 which is 122% higher than that prepared without any additive or post‐treatment solvent, along with enhanced electrical conductivity and Seebeck coefficient. This work highlighted the superior effect of the [BMIm][BF₄] additive and the EG/[BMIm][BF₄] solvent post‐treatment on the TE performance of the VPP‐PEDOT film. These results should help with developing the VPP method to fabricate high‐performance PEDOT films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1738–1744     

Enzymatic‐catalyzed polymerization of water‐soluble electrically conductive polymer PEDOT:PSS

Water‐soluble electrically conductive polymer poly(3,4‐ethylenedioxythiophene) (PEDOT) was synthesized by the enzymatic‐catalyzed method using 3,4‐ethylenedioxythiophene (EDOT) as monomer, poly(styrenesulfonate) (PSS) as water‐soluble polyelectrolyte, horseradish peroxidase enzyme as catalyst, and hydrogen peroxide (H₂O₂) as oxidant. Fourier transform infrared spectra and UV–vis absorption spectra confirm the successful enzymatic‐catalyzed polymerization of PEDOT. Dynamic light scattering data confirm the formation of a stable PEDOT:PSS aqueous dispersion. The thermo gravimetric data show that the obtained PEDOT is stable over a fairly high range of temperatures. The atomic force microscopy height images show that the PEDOT:PSS aqueous dispersion can form excellent homogeneous and smooth films on various substrates by conventional solution processing techniques, which renders this PEDOT:PSS aqueous dispersion a very promising candidate for various application in electronic devices. This enzymatic polymerization is a new approach for the synthesis of optical and electrical active PEDOT polymer, which benefits simple setting, high yields, and environmental friendly route. Copyright © 2014 John Wiley & Sons, Ltd.     

Plasma Modified V2O5/PEDOT Hybrid Based Flexible Electrochromic Devices

Vanadium oxide/poly (3,4‐ ethylenedioxythiophene)(V₂O₅‐PEDOT) hybrid materials were prepared in a rotating quartz plasma reactor via capacitively coupled radio frequency (RF 13.56 MHz) plasma. Thin films of V₂O₅‐PEDOT hybrid and V₂O₅ were obtained by electron beam evaporation technique onto flexible PET substrate for electrochromic devices (ECDs) applications. As a counter electrode, both RF magnetron sputtered MoO₃ onto ITO coated PET and only ITO coated PET electrodes were used. Characterizations of the films were carried out via using scanning electron microscopy‐energy dispersive X‐ray spectroscopy (SEM‐EDX) and X‐ray diffraction (XRD). Hybrid ECDs results showed that synergistic effect depending on improved stability between V₂O₅ and PEDOT. As a result, we developed all solid complementary electrochromic devices including V₂O₅, V₂O₅‐PEDOT and MoO₃ films. The electrochromic device characteristics such as electrochromic contrast, coloration efficiency, switching time were calculated from optical and electrochemical measurements. The highest coloration efficiency and optical contrast were obtained as 53 cm²/C and 17 % for V₂O₅‐PEDOT/MoO₃‐based ECD.     

Synthesis of electro‐active membranes by chemical vapor deposition (CVD) process

In the past two decades, many research is being carried out on coating of textile membranes with conductive polymers. In order to functionalize the textile membranes, coating of different intrinsically conductive polymers can be applied on these membranes through appropriate coating techniques like electrochemical polymerization, wet chemical oxidation and chemical vapor deposition (CVD). Noticeably, CVD process is one of the most suitable and environment friendly technique. In this research, microporous polyester and polytetrafluoroethylene (PTFE) membranes were coated with conductive poly(3,4‐ethylenedioxythiophene) (PEDOT) by CVD process in the presence of ferric(III)chloride (FeCl₃) used as an oxidant. Polymerization of PEDOT on the surface of membranes and pore size was examined by optical microscope and scanning electron microscopy (SEM). Structural analysis investigated with ATR‐FTIR, which revealed the successful deposition of PEDOT on membranes without damaging their parent structures. The amount of PEDOT in PEDOT‐coated polyester and PTFE membranes was explored with the help of thermogravimeteric analysis. Electrical resistance values of PEDOT‐coated membranes were measured by two probe method. The effect of different electrolyte solutions such as, distilled H₂O, Na₂SO₄, HCl, and H₂SO₄ on electrical properties of produced conductive membranes was investigated after dipping for certain period of time. It was found that membranes dipped in H₂SO₄ show very low electrical resistance values, i.e. 0.85 kΩ for polyester membrane and 1.17 kΩ for PTFE membrane. The obtained PEDOT‐coated electro‐active membranes may find their possible utility in fuel cells, enzymatic fuel cells, and antistatic air filter applications. Copyright © 2014 John Wiley & Sons, Ltd.     

Selective Electroanalysis of Ascorbic Acid Using a Nickel Hexacyanoferrate and Poly(3,4‐ethylenedioxythiophene) Hybrid Film Modified Electrode

The mixed‐valent nickel hexacyanoferrate (NiHCF) and poly(3,4‐ethylenedioxythiophene) (PEDOT) hybrid film (NiHCF‐PEDOT) was prepared on a glassy carbon electrode (GCE) by multiple scan cyclic voltammetry. The films were characterized using atomic force microscopy, field emission scanning electron microscopy, energy dispersive spectroscopy, X‐ray diffraction, and electrochemical impedance spectroscopy (AC impedance). The advantages of these films were demonstrated for the detection of ascorbic acid (AA) using cyclic voltammetry and amperometric techniques. The electrocatalytic oxidation of AA at different electrode surfaces, such as the bare GCE, the NiHCF/GCE, and the NiHCF‐PEDOT/GCE modified electrodes, was determined in phosphate buffer solution (pH 7). The AA electrochemical sensor exhibited a linear response from 5×10⁻⁶ to 1.5×10⁻⁴ M (R²=0.9973) and from 1.55×10⁻⁴ to 3×10⁻⁴ M (R²=0.9983), detection limit=1×10⁻⁶ M, with a fast response time (3 s) for AA determination. In addition, the NiHCF‐PEDOT/GCE was advantageous in terms of its simple preparation, specificity, stability and reproducibility.     

Electrochromic enhancement of poly(3,4‐ethylenedioxythiophene) films functionalized with hydroxymethyl and ethylene oxide

2‐((2,3‐Dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane (EDOT‐MO) was successfully synthesized by the reaction of epichlorohydrin with hydroxymethylated‐3,4‐ethylenedioxylthiophene (EDOT‐MeOH), which was synthesized via a simple four‐step sequence. Poly(hydroxymethylated‐3,4‐ethylenedioxylthiophene) (PEDOT‐MeOH) and poly(2‐((2,3‐dihydrothieno[3,4‐b]dioxin‐2‐yl)methoxy)methyl oxirane) (PEDOT‐MO) were electrosynthesized through electropolymerization of EDOT‐MeOH and EDOT‐MO, respectively. Structural, electrochemical, optical, and thermal properties of as‐formed polymers were investigated by FTIR, cyclic voltammetry, UV–vis, and thermogravimetry. Spectroelectrochemistry studies demonstrated that PEDOT‐MeOH and PEDOT‐MO could be reversibly oxidized and reduced accompany with obvious color changes. Further kinetic studies demonstrated that the introduction of hydroxymethyl or ethylene oxide group significantly improved electrochromic properties of 3,4‐ethylenedioxythiophene (PEDOT) and resulted in high contrast ratios (57.3% at 585 nm) and coloration efficiencies (338.5 cm² C^?1), low switching voltages, and fast response time. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1989–1999     

Preparation and Characterization of Carbon Nano‐Onion/PEDOT:PSS Composites

Composites of unmodified or oxidized carbon nano‐onions (CNOs/ox‐CNOs) with poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are prepared with different compositions. By varying the ratio of PEDOT:PSS relative to CNOs, CNO/PEDOT:PSS composites with various PEDOT:PSS loadings are obtained and the corresponding film properties are studied as a function of the polymer. X‐ray photoelectron spectroscopy characterization is performed for pristine and ox‐CNO samples. The composites are characterized by scanning and transmission electron microscopy and differential scanning calorimetry studies. The electrochemical properties of the nanocomposites are determined and compared. Doping the composites with carbon nanostructures significantly increases their mechanical and electrochemical stabilities. A comparison of the results shows that CNOs dispersed in the polymer matrices increase the capacitance of the CNO/PEDOT:PSS and ox‐CNO/PEDOT:PSS composites.     

Biomimetic Synthesis of Water Soluble Conductive Polypyrrole and Poly(3,4‐Ethylenedioxythiophene)

Abstract

A novel biomimetic method for the synthesis of conducting molecular complexes of polypyrrole (PPYR) and poly(3,4‐ethylenedioxythiophene) (PEDOT) in the presence of a polyelectrolyte, such as polystyrene sulfonate (SPS) is presented. A poly(ethylene glycol) modified hematin (PEG‐Hematin) was used to catalyze the polymerization of pyrrole (PYR) and 3,4‐ethylenedioxythiophene (EDOT) in the presence of SPS to form PPYR/SPS and PEDOT/SPS complexes. UV‐VIS, FT‐IR, and electrical conductivity studies for all complexes indicated the presence of a stable and electrically conductive form of these polymers. Furthermore, the presence of SPS in this complex provides a unique combination of properties such as processability and water‐solubility.     

Electrochemical Polymerization of 3,4‐Ethylenedioxythiophene from Aqueous Solution Containing Hydroxypropyl‐β‐cyclodextrin and the Electrocatalytic Behavior of Modified Electrode Towards Oxidation of Sulfur Oxoanions and Nitrite

Poly(3,4‐ethylenedioxythiophene) (PEDOT) film was prepared on glassy carbon electrode from 0.1 M LiClO₄ aqueous solution containing 3,4‐ethylenedioxythiophene (EDOT) monomer and hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), by multiple scan cyclic voltammetry. The effect of oxidation potentials on electropolymerization of EDOT was examined by chronoamperometry and cyclic voltammetric techniques. The results of potentiostatic experiments show that optimum potential range to obtain compact stable film was 0.9 to 1.05 V (vs. Ag/AgCl). At higher positive potential, i.e. above 1.05 V, polymer growth was hindered by passivation effect. The PEDOT film exhibited a strong absorption at 550 nm in the UV‐vis region and also a multicolor electrochromism in different buffer solutions (sky blue‐purple red). Cyclic voltammetric features of PEDOT‐coated electrode in pure supporting electrolyte suggested that charge transfer of the film resembles that of surface‐confined redox species. Finally, the electrocatalytic behavior of PEDOT‐modified electrode was tested towards oxidation of sulfur oxoanions and nitrite using cyclic voltammetry.     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

Thermoelectric properties of PEDOT films prepared by electrochemical polymerization

Thermoelectric (TE) properties of flexible and free‐standing poly(3,4‐ethylenedioxythiophene) (PEDOT) films synthesized via galvanostatic polymerization of 3,4‐ethylenedioxythiophene in propylene carbonate containing sulfated poly(β‐hydroxyethers) (S‐PHE) as polymer electrolyte were elaborately studied. Both electrical conductivities (σ ) and Seebeck coefficients (S ) of the PEDOT:S‐PHE films were increased by decreasing the temperature (T ) or by increasing the current density (J ) during electrosynthesis. Possible reasons for the lack of a trade‐off relation commonly observed between σ and S are discussed on the basis of SEM and oxidation‐level measurements. Preparation of the PEDOT:S‐PHE films was optimized with respect to T and J . In addition, the oxidation level of the PEDOT:S‐PHE films was controlled by potential and the change of their TE performances was discussed in conjunction with the change of chemical species involved. The power factor (PF = σS ²) of the PEDOT:S‐PHE films reached 7.9 μW m^?1 K^?2, leading to a dimensionless TE figure‐of‐merit (ZT ) of 0.013. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 524–531     

Highly enhanced thermoelectric performance of WS2 nanosheets upon embedding PEDOT:PSS

Two‐dimensional (2D) WS₂ nanosheets (NSs) as a promising thermoelectric (TE) material have gained great concern recently. The low electrical conductivity significantly limits its further development. Herein, we reported an effective method to enhance the TE performance of WS₂ NSs by combining poly(3,4‐ethylenedioxythiophene):poly(4‐styrenesulfonate) (PEDOT:PSS). The restacked WS₂ NSs thin film with 1T phase structure obtained by a common chemical lithium intercalation show a high Seebeck coefficient of 98 μV K^?1 and a poor electrical conductivity of 12.5 S cm^?1. The introduction of PEDOT:PSS with different contents obviously improve the electrical conductivity of WS₂ NSs thin films. Although a declining Seebeck coefficient was observed, an optimized TE power factor of 45.2 μW m^?1 k^?1 was achieved for WS₂/PEDOT:PSS composite thin film. Moreover, the as‐prepared WS₂/PEDOT:PSS thin film can be easily peeled off and transferred to other substrate leading to a more promising application. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 997–1004     

Synthesis of Poly(3,4‐ethylenedioxythiophene) latexes using poly(N‐vinylpyrrolidone)‐based copolymers as reactive stabilizers

The synthesis by oxidative polymerization of well‐defined poly(3,4‐ethylenedioxythiophene) (PEDOT) nano‐objects in the presence of modified and unmodified poly(N‐vinylpyrrolidone)‐based copolymers used as stabilizers in aqueous media is reported. Ammonium persulfate or a mixture of ammonium persulfate with CuCl₂ or CuBr₂ was used as oxidants. The effects of several parameters such as the molar mass and the concentration of the stabilizer as well as the nature of the oxidants on the size, morphology, and the conductivity of the PEDOT particles have been investigated. The distribution of the reactive moieties along the copolymer stabilizer backbone was shown to be crucial to get well‐defined PEDOT nano‐objects. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3841–3855, 2010     

Synthesis of highly conductive EDOT copolymer films via oxidative chemical in situ polymerization

Poly(3,4‐ethylenedioxythiophene)s (PEDOT) represent a class of conjugated polymers that can be potentially used as an electrode material for flexible organic electronics due to their superior conductivity and transparency. In this study, we demonstrate that the conductivity of a PEDOT containing copolymer film can be further enhanced by the oxidative chemical in situ copolymerization of a liquid film spun coated from monomer mixture (3,4‐ethylenedioxythiophene (EDOT) and 3‐thienyl ethoxybutanesulfonate (TEBS)), oxidant (iron(III) p‐toluenesulfonate (Fe(OTs)₃)), weak base (imidazole), and solvent (methanol). We investigated that the effect of the processing parameters such as the molar ratios TEBS/EDOT, IM/EDOT, and Fe(OTs)₃/EDOT on the surface morphology, optical property, and the conductivity of the resulting copolymer films. These parameters have been optimized to achieve conductivities for the copolymer films as high as 170 S/cm compared with a conductivity of 30 S/cm for the pure PEDOT film synthesized using the same fabrication method. This conductivity enhancement for the copolymer films was found to be resulted from the fact that the addition of TEBS monomer reduces the copolymerization rate, leading to the formation of much more uniform film surface without defects and copolymers of higher molecular weight which increase the conductivity of the resulting copolymer film. The composition of two monomers in the copolymer film is not related to the variation of conductivity. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1662–1673, 2008     

Amperometric Detection and Quantification of Nitrate Ions Using a Highly Sensitive Nanostructured Membrane Electrocodeposited Biosensor Array

In the past few decades, there has been a steady rise in the release of nitrate (NO₃^?), a prominent water soluble contaminant associated with the increasing use of nitrate based fertilizers. In this study, we suggest the use of a highly sensitive, enzymatic biosensor capable of quantifying minute concentrations of nitrate. The disposable nitrate biosensor consists of a sensing element in the form of nitrate reductase which is immobilized within a conductive polymer matrix to generate a quantifiable amperometric response. In this work, nanoarrays of co‐immobilized nitrate reductase and poly(3,4‐ethylenedioxythiophene) (PEDOT), were grown using a template assisted electropolymerization route. The performance of the biosensor is a strong function of electropolymerization conditions and the morphology of the PEDOT nanostructures. The electropolymerized biosensor displays excellent specificity w.r.t other interfering ions as evidenced from the initial rate kinetics. With a response time of a few seconds, limit of detection (LOD) as low as 0.16 ppm and sensitivity of about 92 µA/mM , the one‐step electropolymerized nanostructured nitrate biosensor developed in this study shows improved performance compared to similar electrochemical sensors reported in literature. The PEDOT/nitrate reductase nanowire sensor developed in this work shows superior attributes compared to a flat 2D nitrate reductase‐co‐immobilized PEDOT film grown using similar electropolymerization conditions. This combined with easy and fast fabrication technique opens up exciting opportunities for developing high accuracy PEDOT based nanobiosensors for field testing of nitrate contaminants in the future.