Wide‐Range Light‐Harvesting Donor–Acceptor Assemblies through Specific Intergelator Interactions via Self‐Assembly

We have synthesized two new low‐molecular‐mass organogelators based on tri‐p‐phenylene vinylene derivatives, one of which could be designated as the donor whereas the other one is an acceptor. These were prepared specifically to show the intergelator interactions at the molecular level by using donor–acceptor self‐assembly to achieve appropriate control over their macroscopic properties. Intermolecular hydrogen‐bonding, π‐stacking, and van der Waals interactions operate for both the individual components and the mixtures, leading to the formation of gels in the chosen organic solvents. Evidence for intergelator interactions was acquired from various spectroscopic, microscopic, thermal, and mechanical investigations. Due to the photochromic nature of these molecules, interesting photophysical properties, such as solvatochromism and J‐type aggregation, were clearly observed. An efficient energy transfer was exhibited by the mixture of donor–acceptor assemblies. An array of four chromophores was built up by inclusion of two known dyes (anthracene and rhodamine 6G) for the energy‐transfer studies. Interestingly, an energy‐transfer cascade was observed in the assembly of four chromophores in a particular order (anthracene‐donor‐acceptor‐rhodamine 6G), and if one of the components was removed from the assembly the energy transfer process was discontinued. This allowed the build up of a light‐harvesting process with a wide range. Excitation at one end produces an emission at the other end of the assembly.     

Metal–Organic Frameworks as a Versatile Tool To Study and Model Energy Transfer Processes

Development of materials with efficient and directional energy transfer (ET) could significantly modify the existing energy and material landscape. Metal–organic frameworks (MOFs) are a unique tool to address the upcoming challenges related to the enhancement of ET efficiency and directional energy transport. To harness MOFs as a versatile platform, mechanistic and structural aspects governing ET efficiency should be elucidated. In this context, we review ET mechanisms and structural motifs based on the recent advances achieved in MOF chemistry and also highlight the possible practical applications that are enabled by these studies.     

Light‐Harvesting Hybrid Assemblies

Light‐harvesting hybrids have gained much importance as they are considered as potential mimics for photosynthetic systems. In this Concept article we introduce the design concepts involved in the building up of light‐harvesting hybrids; these resemble the well‐studied organic‐based assemblies for energy transfer. We have structured this article into three parts based on the strategies adopted in the synthesis of hybrid assemblies, as covalent, semicovalent, and noncovalent procedures. Furthermore, the properties and structural features of the hybrids and analogous organic assemblies are compared. We also emphasize the challenges involved in the processability of these hybrid materials for device applications and present our views and results to address this issue through the design of soft‐hybrids by a solution‐state, noncovalent, self‐assembly process.     

A Supramolecular Artificial Light‐Harvesting System with Two‐Step Sequential Energy Transfer for Photochemical Catalysis

An artificial light‐harvesting system with sequential energy‐transfer process was fabricated based on a supramolecular strategy. Self‐assembled from the host–guest complex formed by water‐soluble pillar[5]arene (WP5), a bola‐type tetraphenylethylene‐functionalized dialkyl ammonium derivative (TPEDA), and two fluorescent dyes, Eosin Y (ESY) and Nile Red (NiR), the supramolecular vesicles achieve efficient energy transfer from the AIE guest TPEDA to ESY. ESY can function as a relay to further transfer the energy to the second acceptor NiR and realize a two‐step sequential energy‐transfer process with good efficiency. By tuning the donor/acceptor ratio, bright white light emission can be successfully achieved with a CIE coordinate of (0.33, 0.33). To better mimic natural photosynthesis and make full use of the harvested energy, the WP5?TPEDA‐ESY‐NiR system can be utilized as a nanoreactor: photocatalyzed dehalogenation of α‐bromoacetophenone was realized with 96 % yield in aqueous medium.     

Ruthenium(II)–Polyimine–Coumarin Light‐Harvesting Molecular Arrays: Design Rationale and Application for Triplet–Triplet‐Annihilation‐Based Upconversion

Ru^II–bis‐pyridine complexes typically absorb below 450 nm in the UV spectrum and their molar extinction coefficients are only moderate (ε<16 000 M ^?1 cm^?1). Thus, Ru^II–polyimine complexes that show intense visible‐light absorptions are of great interest. However, no effective light‐harvesting ruthenium(II)/organic chromophore arrays have been reported. Herein, we report the first visible‐light‐harvesting Ru^II–coumarin arrays, which absorb at 475 nm (ε up to 63 300 M ^?1 cm^?1, 4‐fold higher than typical Ru^II–polyimine complexes). The donor excited state in these arrays is efficiently converted into an acceptor excited state (i.e., efficient energy‐transfer) without losses in the phosphorescence quantum yield of the acceptor. Based on steady‐state and time‐resolved spectroscopy and DFT calculations, we proposed a general rule for the design of Ru^II–polypyridine–chromophore light‐harvesting arrays, which states that the ¹IL energy level of the ligand must be close to the respective energy level of the metal‐to‐ligand charge‐transfer (M LCT) states. Lower energy levels of ¹IL/³IL than the corresponding ¹M LCT/³M LCT states frustrate the cascade energy‐transfer process and, as a result, the harvested light energy cannot be efficiently transferred to the acceptor. We have also demonstrated that the light‐harvesting effect can be used to improve the upconversion quantum yield to 15.2 % (with 9,10‐diphenylanthracene as a triplet‐acceptor/annihilator), compared to the parent complex without the coumarin subunit, which showed an upconversion quantum yield of only 0.95 %.     

Light‐Harvesting Three‐Chromophore Systems Based on Biphenyl‐Bridged Periodic Mesoporous Organosilica

Three‐chromophore systems with light‐harvesting behavior were prepared, which are based on periodic mesoporous organosilica (PMO) with crystal‐like ordered structure. The organic bridges of biphenyl‐PMO in the pore walls act as donors and two types of dye are incorporated in the one‐dimensional channels. Consecutive two‐step‐Förster resonance energy transfer is observed from the biphenyl moieties to mediators (diethyl‐aminocoumarin or aminoacridone), followed by energy transfer from mediators to acceptors (dibenzothiacarbocyanine, indodicarbocyanine, sulforhodamine G). High energy‐transfer efficiencies ranging from 70 to 80 % are obtained for two‐step‐FRET, indicating that the mesochannel structure with one‐dimensional ordering provides spatial arrangement of chromophore pairs for an efficient direct energy transfer. The emission wavelength can be tuned by a choice of acceptor dye: 477 nm (diethylaminocoumarin), 519 nm (aminoacridone), 567 nm (sulforhodamine G), 630 nm (dibenzothiacarbocyanine), and 692 nm (indodicarbocyanine).     

Long‐Distance Electronic Energy Transfer in Light‐Harvesting Supramolecular Polymers

The efficient collection of solar energy relies on the design and construction of well‐organized light‐harvesting systems. Herein we report that supramolecular phenanthrene polymers doped with pyrene are effective collectors of light energy. The linear polymers are formed through the assembly of short amphiphilic oligomers in water. Absorption of light by phenanthrene residues is followed by electronic energy transfer along the polymer over long distances (>100 nm) to the accepting pyrene molecules. The high efficiency of the energy transfer, which is documented by large fluorescence quantum yields, suggests a quantum coherent process.     

Light‐Harvesting Photocatalysis for Water Oxidation Using Mesoporous Organosilica

An organic‐based photocatalysis system for water oxidation, with visible‐light harvesting antennae, was constructed using periodic mesoporous organosilica (PMO). PMO containing acridone groups in the framework (Acd‐PMO), a visible‐light harvesting antenna, was supported with [Ru^II(bpy)₃²⁺] complex (bpy=2,2′‐bipyridyl) coupled with iridium oxide (IrO_x) particles in the mesochannels as photosensitizer and catalyst, respectively. Acd‐PMO absorbed visible light and funneled the light energy into the Ru complex in the mesochannels through excitation energy transfer. The excited state of Ru complex is oxidatively quenched by a sacrificial oxidant (Na₂S₂O₈) to form Ru³⁺ species. The Ru³⁺ species extracts an electron from IrO_x to oxidize water for oxygen production. The reaction quantum yield was 0.34 %, which was improved to 0.68 or 1.2 % by the modifications of PMO. A unique sequence of reactions mimicking natural photosystem II, 1) light‐harvesting, 2) charge separation, and 3) oxygen generation, were realized for the first time by using the light‐harvesting PMO.     

Highly Efficient Artificial Light‐Harvesting Systems Constructed in Aqueous Solution Based on Supramolecular Self‐Assembly

Highly efficient light‐harvesting systems were successfully fabricated in aqueous solution based on the supramolecular self‐assembly of a water‐soluble pillar[6]arene (WP6), a salicylaldehyde azine derivative (G), and two different fluorescence dyes, Nile Red (NiR) or Eosin Y (ESY). The WP6‐G supramolecular assembly exhibits remarkably improved aggregation‐induced emission enhancement and acts as a donor for the artificial light‐harvesting system, and NiR or ESY, which are loaded within the WP6‐G assembly, act as acceptors. An efficient energy‐transfer process takes place from the WP6‐G assembly not only to NiR but also to ESY for these two different systems. Furthermore, both of the WP6‐G‐NiR and WP6‐G‐ESY systems show an ultrahigh antenna effect at a high donor/acceptor ratio.     

Synthesis and Photoinduced Intramolecular Processes of Light‐Harvesting Silicon Phthalocyanine–Naphthalenediimide–Fullerene Connected Systems

Fast moving : A new pentad (see figure) composed of silicon phthalocyanine (SiPc), as electron donor, that is connected with two units of naphthalenediimide (NDI) and fullerene C₆₀, as electron acceptors, undergoes fast and efficient charge‐separation processes via the NDI and SiPc singlet excited states.

     

Long‐Lived Room‐Temperature Near‐IR Phosphorescence of BODIPY in a Visible‐Light‐Harvesting N^C^N PtII–Acetylide Complex with a Directly Metalated BODIPY Chromophore

Room‐temperature long‐lived near‐IR phosphorescence of boron‐dipyrromethene (BODIPY) was observed (λ_em=770 nm, Φ_P=3.5 %, τ_P=128.4 μs). Our molecular‐design strategy is to attach Pt^II coordination centers directly onto the BODIPY π‐core using acetylide bonds, rather than on the periphery of the BODIPY core, thus maximizing the heavy‐atom effect of Pt^II. In this case, the intersystem crossing (ISC) is facilitated and the radiative decay of the T₁ excited state of BODIPY is observed, that is, the phosphorescence of BODIPY. The complex shows strong absorption in the visible range (ε=53800 M ^?1 cm^?1 at 574 nm), which is rare for Pt^II–acetylide complexes. The complex is dual emissive with ³M LCT emission at 660 nm and the ³IL emission at 770 nm. The T₁ excited state of the complex is mainly localized on the BODIPY moiety (i.e. ³IL state, as determined by steady‐state and time‐resolved spectroscopy, 77 K emission spectra, and spin‐density analysis). The strong visible‐light‐harvesting ability and long‐lived T₁ excite state of the complex were used for triplet‐triplet annihilation based upconversion and an upconversion quantum yield of 5.2 % was observed. The overall upconversion capability (η=ε×Φ_UC) of this complex is remarkable considering its strong absorption. The model complex, without the BODIPY moiety, gives no upconversion under the same experimental conditions. Our work paves the way for access to transition‐metal complexes that show strong absorption of visible light and long‐lived ³IL excited states, which are important for applications in photovoltaics, photocatalysis, and upconversions, etc.     

Highly Branched Polymers with Layered Structures that Mimic Light‐Harvesting Processes

Hyperbranched polymers (HBPs) with decorated donor and acceptor chromophores in different domains were constructed to demonstrate the function of light harvesting in a polymeric nanostructure. Taking advantage of our recently developed chain‐growth copper‐catalyzed azide–alkyne cycloaddition polymerization, two structural parameters in the HBPs, for example, the molar ratio of the acceptor Coumarin 343 in the core to the donor Coumarin 2 on the periphery, and the average distance between these two layers, could be independently varied in a one‐pot synthesis. The results demonstrated an efficient energy transfer from the excited Coumarin 2 to the ground‐state Coumarin 343 in the core, with the efficiency of the energy transfer reaching as high as 98 %. The excited Coumarin 343, after receiving energy from donor Coumarin 2 emitted higher fluorescence intensity than when directly excited, indicating an observed light concentration effect from the periphery dye to the central dye in one polymer structure.     

DNA‐Based Oligochromophores as Light‐Harvesting Systems

The chromophores ethynyl pyrene as blue, ethynyl perylene as green and ethynyl Nile red as red emitter were conjugated to the 5‐position of 2′‐deoxyuridine via an acetylene bridge. Using phosphoramidite chemistry on solid phase labelled DNA duplexes were prepared that bear single chromophore modifications, and binary and ternary combinations of these chromophore modifications. The steady‐state and time‐resolved fluorescence spectra of all three chromophores were studied in these modified DNA duplexes. An energy‐transfer cascade occurs from ethynyl pyrene over ethynyl perylene to ethynyl Nile red and subsequently an electron‐transfer cascade in the opposite direction (from ethynyl Nile red to ethynyl perylene or ethynyl pyrene, but not from ethynyl perylene to ethynyl pyrene). The electron‐transfer processes finally provide charge separation. The efficiencies by these energy and electron‐transfer processes can be tuned by the distances between the chromophores and the sequences. Most importantly, excitation at any wavelength between 350 and 700 nm finally leads to charge separated states which make these DNA samples promising candidates for light‐harvesting systems.     

Hierarchical Self‐Assembly of a Biomimetic Light‐Harvesting Antenna Based on DNA G‐Quadruplexes

A new modular approach to an artificial light‐harvesting antenna system is presented. The approach involves the hierarchical self‐assembly of porphyrin acceptor molecules to G‐quadruplexes tethered to coumarin donor moieties.     

Guest‐Induced Photophysical Property Switching of Artificial Light‐Harvesting Dendrimers

An artificial light‐harvesting multiporphyrin dendrimer ( 8P_ZnP_FB ) composed of a focal freebase porphyrin ( P_FB ) with eight zinc(II) porphyrin ( P_Zn ) wings exhibited unique photophysical property switching in response to specific guest molecule binding. UV/Vis titration studies indicated stable 1:2 host–guest complex formation between 8P_ZnP_FB and meso‐tetrakis(4‐pyridyl)‐porphyrin ( TPyP ) for which the first and second association constants were estimated to be >10⁸ M ^?1 and 3.0×10⁷ M ^?1, respectively. 8P_ZnP_FB originally shows 94 % energy transfer efficiency from P_Zn to the focal P_FB . By the formation of the host–guest complex ( 8P_ZnP_FB? 2 TPyP ) the emission intensity of 8P_ZnP_FB is significantly decreased, and an ultrafast charge separation state is generated. The energy transfer process from P_Zn wings to the P_FB core in 8P_ZnP_FB is almost entirely switched to an electron transfer process by the formation of 8P_ZnP_FB? 2 TPyP .     

Light harvesting and energy transfer within coumarin‐labeled polymers

Linear copolymers that have pendant coumarin‐2 and coumarin‐343 chromophores were prepared as analogues to previously synthesized light‐harvesting dendrimers. The chromophore ratios within these polymers were maintained similar to those of the various generation dendrimers to investigate the effect of polymer architecture on the energy‐transfer efficiency between the coumarin‐2 donors and coumarin‐343 acceptors. Both physical and photophysical properties of these polymers were analyzed and compared to those of the analogous dendrimers. Energy‐transfer efficiencies were relatively high in the polymers; however, deleterious excimer formation between the coumarin‐343 chromophores diminished the quantum yield of fluorescence of the polymers when compared to the analogous dendrimers. Overall, it was found that the ultimate performance of the dendritic light‐harvesting antennae was superior to that of the polymeric analogues, but the polymers were more practical in terms of synthetic accessibility. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1366–1373, 2001     

Versatile Bisethynyl[60]fulleropyrrolidine Scaffolds for Mimicking Artificial Light‐Harvesting Photoreaction Centers

Fullerene‐based tetrads, triads, and dyads are presented in which [60]fulleropyrrolidine synthons are linked to an oligo(p‐phenyleneethynylene) antenna at the nitrogen atom and to electron‐donor phenothiazine (PTZ) and/or ferrocene (Fc) moieties at the α carbon of the pyrrolidine cycle through an acetylene spacer. Cyclic voltammetry and UV/ Vis absorption spectra evidence negligible ground‐state electronic interactions among the subunits. By contrast, strong excited‐state interactions are detected upon selective light irradiation of the antenna (UV) or of the fullerene scaffold (Vis). When only PTZ is present as electron donor, photoinduced electron transfer to the fullerene unit is unambiguously detected in benzonitrile, but this is not the case when Fc is part of the multicomponent system. These results suggest that Fc is a formidable energy transfer quencher and caution should be used in choosing it as electron donor to promote efficient charge separation in multicomponent arrays.     

Light‐Driven Electron Accumulation in a Molecular Pentad

Accumulation and temporary storage of redox equivalents with visible light as an energy input is of pivotal importance for artificial photosynthesis because key reactions, such as CO₂ reduction or water oxidation, require the transfer of multiple redox equivalents. We report on the first purely molecular system, in which a long‐lived charge‐separated state (τ≈870 ns) with two electrons accumulated on a suitable acceptor unit can be observed after excitation with visible light. Importantly, no sacrificial reagents were employed.