Cucurbit[7]uril: A High‐Affinity Host for Encapsulation of Amino Saccharides and Supramolecular Stabilization of Their α‐Anomers in Water

Cucurbit[7]uril (CB[7]), an uncharged and water‐soluble macrocyclic host, binds protonated amino saccharides (D ‐glucosamine, D ‐galactosamine, D ‐mannosamine and 6‐amino‐6‐deoxy‐D ‐glucose) with excellent affinity (K_a=10³ to 10⁴ M ^?1). The host–guest complexation was confirmed by NMR spectroscopy, isothermal titration calorimetry (ITC), and MALDI‐TOF mass spectral analyses. NMR analyses revealed that the amino saccharides, except D ‐mannosamine, are bound as α‐anomers within the CB[7] cavity. ITC analyses reveal that CB[7] has excellent affinity for binding amino saccharides in water. The maximum affinity was observed for D ‐galactosamine hydrochloride (K_a=1.6×10⁴ M ^?1). Such a strong affinity for any saccharide in water using a synthetic receptor is unprecedented, as is the supramolecular stabilization of an α‐anomer by the host.     

Host‐Guest Complexes of [TriPip222], the Piperazine Analogue of [2.2.2]: Prediction of Ion Selectivity by Quantum Chemical Calculations VIII[#]

The selectivity of the cryptand [TriPip222], a per‐aza analogue of cryptand [2.2.2], in which each of the linking arms contains a piperazine ring for the endohedral complexation of metal cations of the I, II, and III main groups and group 12 of the periodic table of elements, was predicted on the basis of DFT [B3LYP/LANL2DZp (LANL2DZp = LANL2DZ augmented with polarization functions on non‐hydrogen atoms)] calculated structures and complex‐formation energies. The cavity size of the studied cryptand is similar to that of [bpy.bpy.bpy], [2.bpy.bpy] and [2.phen.phen], such that the complexation of K⁺ > Na⁺ and of Sr²⁺ ≈ Ca²⁺ > Ba²⁺ are most favorable. The essential flexibility for achieving the selectivity of the cryptand is mainly associated with a twist of the CH₂–N_bridgehead ··· N_bridgehead–CH₂ angle and not with the piperazine moiety.     

Host–Guest Chemistry of a Water‐Soluble Pillar[5]arene: Evidence for an Ionic‐Exchange Recognition Process and Different Complexation Modes

The complexation of an anionic guest by a cationic water‐soluble pillararene is reported. Isothermal titration calorimetry (ITC), ¹H NMR, ¹H and ¹⁹F DOSY, and STD NMR experiments were performed to characterize the complex formed under aqueous neutral conditions. The results of ITC and ¹H NMR analyses showed the inclusion of the guest inside the cavity of the pillar[5]arene, with the binding constant and thermodynamic parameters influenced by the counter ion of the macrocycle. NMR diffusion experiments showed that although a fraction of the counter ions are expelled from the host cavity by exchange with the guest, a complex with both counter ions and the guest inside the pillararene is formed. The results also showed that at higher concentrations of guest in solution, in addition to the inclusion of one guest molecule in the cavity, the pillararene can also form an external complex with a second guest molecule.     

A Cryptate Reference Electrode for Ionic Liquids

The cryptate electrode (Ag/Ag⁺222), prepared by immersing silver wire in a solution of silver(I) salt and the cryptand 222 (4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo[8.8.8]hexacosane) in ionic liquids have been studied. The potential of the electrode is stabilized by the equilibrium of the Ag⁺ ion complexation by the cryptand, similarly to the potential stabilization by the ionic product of slightly soluble salts, used in aqueous electrodes of the second kind. The Ag/Ag⁺222 cryptate electrode (concentration of the cryptate was much higher than the silver(I) cation concentration, [222]>[Ag⁺]) may be used as a reference electrode in room temperature ionic liquids. The potential of the Ag/Ag⁺222 electrode is less sensitive to the presence of impurities, such as halides or water, in comparison to the Ag/Ag⁺ electrode. After anodic or cathodic polarization, the potential of the Ag/Ag⁺222 electrode comes back to the initial open circuit potential quickly. Preparation of the Ag/Ag⁺222 reference electrode is very easy: a silver wire is immersed in a solution of Ag⁺ salt and cryptand 222 (both available commercially) in the ionic liquid under study.     

Reversible interconversion between a supramolecular polymer and a discrete octameric species from a guanosine derivative by dynamic cation binding and release

[reaction: see text] The tunable interconversion between two highly ordered supramolecular motifs (G-quartet K(+)-templated column and G-ribbon) of a lipophilic guanosine derivative fueled by cation complexation and release in a cryptand [2.2.2] containing guanosine solution is reported. The process is controlled by the sequential addition of acid and base.     

Properties and Applications of Cryptand‐22 Surfactant for Ion Transport and Ion Extraction

A non‐ionic cryptand‐22 surfactant consisting of a macrocyclic cryptand‐22 polar head and a long paraffinic chain (C₁₀H₂₁‐Cryptand‐22) was synthesized and characterized. The critical micellar concentration (CMC) of the cryptand surfactant in ROH/H₂O mixed solvent was determined by the pyrene fluorescence probe method. In general, the cmc of the cryptand surfactant increased upon decreasing the polarity of the surfactant solution. The cryptand surfactant also can behave as a pseudo cationic surfactant by protonation of cryptand‐22 or complexation with metal ions. Effects of protonation and metal ions on the cmc of the cryptand surfactant were investigated. A preliminary application of the cryptand surfactant as an ion‐transport carrier for metal ions, e.g., Li⁺, Na⁺, K⁺ and Sr²⁺, through an organic liquid‐membrane was studied. The transport ability of the cryptand surfactant for these metal ions was in the order: K⁺ ≥ Na⁺ < Li⁺ < Sr²⁺. A comparison of the ion‐transport ability of the cryptand surfactant with other macrocyclic polyethers, e.g., dibenzo‐18‐crown‐6, 18‐crown‐6 and benzo‐15‐crown‐5, was studied and discussed. Among these macrocyclic polyethers, the cryptand surfactant was the best ion‐transport carrier for Na⁺, Li⁺ and Sr²⁺ ions. Furthermore, a foam extraction system using the cryptand surfactant to extract the cupric ion was also investigated.     

Hydrogen Bonding in Phosphine Oxide/Phosphate–Phenol Complexes

To develop a new solvent‐impregnated resin (SIR) system for the removal of phenols and thiophenols from water, complex formation by hydrogen bonding of phosphine oxides and phosphates is studied using isothermal titration calorimetry (ITC) and quantum chemical modeling. Six different computational methods are used: B3LYP, M06‐2X, MP2, spin component‐scaled (SCS) MP2 [all four with 6‐311+G(d,p) basis set], a complete basis set extrapolation at the MP2 level (MP2/CBS), and the composite CBS‐Q model. This reveals a range of binding enthalpies (ΔH) for phenol–phosphine oxide and phenol–phosphate complexes and their thio analogues. Both structural (bond lengths/angles) and electronic elements (charges, bond orders) are studied. Furthermore, solvent effects are investigated theoretically by the PCM solvent model and experimentally via ITC. From our calculations, a trialkylphosphine oxide is found to be the most promising extractant for phenol in SIRs, yielding ΔH=?14.5 and ?9.8 kcal mol^?1 with phenol and thiophenol, respectively (MP2/CBS), without dimer formation that would hamper the phenol complexation. In ITC measurements, the ΔH of this complex was most negative in the noncoordinating solvent cyclohexane, and slightly less so in π–π interacting solvents such as benzene. The strongest binding is found for the dimethyl phosphate–phenol complex [?15.1 kcal mol^?1 (MP2/CBS)], due to the formation of two H‐bonds (P?O???H‐O‐ and P‐O‐H???O‐H); however, dimer formation of these phosphates competes with complexation of phenol, and would thus hamper their use in industrial extractions. CBS‐Q calculations display erroneous trends for sulfur compounds, and are found to be unsuitable. Computationally relatively cheap SCS‐MP2 and M06‐2X calculations did accurately agree with the much more elaborate MP2/CBS method, with an average deviation of less than 1 kcal mol^?1.     

Host‐Guest Complexes of Dodeka(ethylene)octamine: Prediction of Ion Selectivity by Quantum Chemical Calculations IX

In this contribution we investigated the ion complexation of Bühl's cryptand, dodeka(ethylene)octamine by quantum chemical methods (B3LYP/LANL2DZp). This cryptand is an isomer of a well‐known Lehn‐type cryptand [TriPip222]. The ion selectivity was determined based on the energetic criteria derived by model reactions starting from solvated metal ions and empty dodeka(ethylene)octamine, and by comparing the M–N bond length in [M ? dodeka(ethylene)octamine]^m+ and [M(NH₃)₆]^m+. We calculated that Bühl's cryptand will complex best Na⁺ followed by Li⁺ as alkaline cations and Ca²⁺ followed by Mg²⁺ as alkaline earth metal ions. Based on this data we conclude that Bühl's cryptand offers a smaller cavity to nest ions than the Lehn‐type [TriPip222].     

2]Pseudorotaxanes based on the recognition of cryptands to vinylogous viologens

Host-guest complexation between two crown ether-based cryptands and two vinylogous viologens has been studied. Formation of [2]pseudorotaxanes from a dibenzo-24-crown-8-based cryptand and these vinylogous viologens can be reversibly controlled by adding and removing potassium cation in acetone. Furthermore, the complexation between a bis(m-phenylene)-32-crown-10-based cryptand and a vinylogous viologen exhibits a high association constant, 1.18 × 10(6) M(-1) in acetone, and leads to the formation of a supramolecular poly[2]pseudorotaxane in the solid state.     

Cooperative binding of calix[4]pyrrole-anion complexes and alkylammonium cations in halogenated solvents

Calix[4]pyrrole-chloride interactions are affected not only by the choice of countercation in halogenated solvents, but show a specific dependence on the way in which these cations are bound within the electron rich, bowl-like calix[4]pyrrole cavity formed upon chloride anion complexation. In dichloromethane, the affinities of simple meso-octamethylcalix[4]pyrrole (1) for methyl-, ethyl-, and n-butylammonium chlorides are on the order of 10(5), 10(4), and 10(2) M(-1), respectively, as determined from isothermal titration calorimetry (ITC) analyses. These cation-dependent anion affinity effects, while clearly evident, are less pronounced in other halogenated solvents, such as 1,2-dichloroethane. Support for the proposed cation complexation selectivity is provided by solid state X-ray crystallographic analyses.     

Thermodynamic origins of selective binding affinity between p-sulfonatocalix[4,5]arenes with biguanidiniums

The binding geometries, abilities and thermodynamic parameters for the intermolecular complexation of two water-soluble calixarenes, p-sulfonatocalix[4]arene (SC4A) and p-sulfonatocalix[5]arene (SC5A), with biguanidinium guests, metformin (MFM) and phenformin (PFM), were investigated by (1)H and 2D NMR spectroscopy, X-ray crystallography, and isothermal titration calorimetry (ITC). The obtained results show that biguanidinium guests are captured by calixarenes with the alkyl or aromatic portion immersed into the cavities and the guanidinium portion fixed at the upper-rims. At both acidic and neutral conditions, SC4A always presents stronger binding affinities to biguanidinium guests than SC5A. Moreover, SC4A prefers to include MFM rather than PFM. As a result, the binding selectivity of MFM is up to 44.7 times for the SC4A/SC5A hosts. The intrinsic relationship between binding structures and selectivities were comprehensively analyzed and discussed from the viewpoint of thermodynamics. Finally, the ITC measurements were further performed in phosphate buffer instead of aqueous solution, to examine the buffer effects, counterion effect, and the differences between thermodynamic and apparent association constants.     

Van der Waals interactions dominate ligand-protein association in a protein binding site occluded from solvent water

In the present study we examine the enthalpy of binding of 2-methoxy-3-isobutylpyrazine (IBMP) to the mouse major urinary protein (MUP), using a combination of isothermal titration calorimetry (ITC), NMR, X-ray crystallography, all-atom molecular dynamics simulations, and site-directed mutagenesis. Global thermodynamics data derived from ITC indicate that binding is driven by favorable enthalpic contributions, rather than a classical entropy-driven signature that might be expected given that the binding pocket of MUP-1 is very hydrophobic. The only ligand-protein hydrogen bond is formed between the side-chain hydroxyl of Tyr120 and the ring nitrogen of the ligand in the wild-type protein. ITC measurements on the binding of IBMP to the Y120F mutant demonstrate a reduced enthalpy of binding, but nonetheless binding is still enthalpy dominated. A combination of solvent isotopic substitution ITC measurements and all-atom molecular dynamics simulations with explicit inclusion of solvent water suggests that solvation is not a major contributor to the overall binding enthalpy. Moreover, hydrogen/deuterium exchange measurements suggest that there is no significant contribution to the enthalpy of binding derived from "tightening" of the protein structure. Data are consistent with binding thermodynamics dominated by favorable dispersion interactions, arising from the inequality of solvent-solute dispersion interactions before complexation versus solute-solute dispersion interactions after complexation, by virtue of poor solvation of the binding pocket.     

Investigation of the inclusion of the herbicide cycluron in native cyclodextrins by X-ray diffraction,nuclear magnetic resonance spectroscopy and isothermal titration calorimetry

The formation of inclusion complexes between the native cyclodextrins (CDs) and the urea herbicide cycluron has been investigated both in solution and in the solid state. Single-crystal X-ray structures of both the uncomplexed guest and the β-CD·cycluron complex were determined while powder X-ray diffraction was used to confirm complexation between γ-CD and cycluron in the solid state. Solution-state complexation between the herbicide and α-, β- and γ-CD was established using ¹H NMR spectroscopy and isothermal titration calorimetry (ITC). From the ¹H NMR spectroscopic studies 1:1 complex stoichiometry was indicated in all cases and association constant values (K) were determined as 228, 3254 and 155 for the complexes α-CD·cycluron, β-CD·cycluron and γ-CD·cycluron, respectively. Assigning a 1:1 host–guest ratio, the ITC technique produced K values of the same order as those determined using the spectroscopic method. The thermodynamic parameters ΔH, ΔS and ΔG obtained using ITC provide insights into the driving forces involved during complex formation.     

Thermodynamics of Micellization from Heat‐Capacity Measurements

Differential scanning calorimetry (DSC), the most important technique for studying the thermodynamics of structural transitions of biological macromolecules, is seldom used in quantitative thermodynamic studies of surfactant micellization/demicellization. The reason for this could be ascribed to an insufficient understanding of the temperature dependence of the heat capacity of surfactant solutions (DSC data) in terms of thermodynamics, which leads to problems with the design of experiments and interpretation of the output signals. We address these issues by careful design of DSC experiments performed with solutions of ionic and nonionic surfactants at various surfactant concentrations, and individual and global mass‐action model analysis of the obtained DSC data. Our approach leads to reliable thermodynamic parameters of micellization for all types of surfactants, comparable with those obtained by using isothermal titration calorimetry (ITC). In summary, we demonstrate that DSC can be successfully used as an independent method to obtain temperature‐dependent thermodynamic parameters for micellization.     

Complexes of Click‐Derived Bistriazolylpyridines: Remarkable Electronic Influence of Remote Substituents on Thermodynamic Stability as well as Electronic and Magnetic Properties

2,6‐Bis(1,2,3‐triazol‐4‐yl)pyridine (btp) ligands with substitution patterns ranging from strongly electron‐donating to strongly electron‐accepting groups, readily prepared by means of Cu‐catalyzed 1,3‐dipolar cycloaddition (the “click” reaction), were investigated with regard to their complexation behavior, and the properties of the resulting transition‐metal compounds were compared. Metal–btp complexes of 1:1 stoichiometry, that is, [Ru(btp)Cl₂(dmso)] and [Zn(btp)Br₂], could be isolated and were crystallographically characterized: they display octahedral and trigonal‐bipyramidal coordination geometries, respectively, and exhibit high aggregation tendencies due to efficient π–π stacking leading to low solubilities. Metal–btp complexes of 1:2 stoichiometry, that is, [Fe(btp)₂]²⁺ and [Ru(btp)₂]²⁺, could also be synthesized and their metal centers show the expected octahedral coordination spheres. The iron compounds exhibit quite a complex magnetic behavior in the solid state including spin crossover near room temperature, and hysteresis and locking into high‐spin states on tempering at 400 K, depending on the substituents on the btp ligands. Cyclic voltammetry studies of [Ru(btp)₂]²⁺ reveal strong modulation of the oxidation potentials by more than 0.6 V and a clear linear correlation to the Hammett constant (σ_para) of the substituent at the pyridine core. Isothermal titration calorimetry was used to measure the thermodynamics of the Fe^II–btp complexation process and enabled accurate determination of the complexation enthalpies, which display a linear relationship with the σ_para values for the terminal phenyl substituents. Detailed NMR spectroscopic studies finally revealed that in the case of Fe^II complexation, dynamics are rapid for all investigated btp derivatives in acetonitrile, while replacing Fe^II by Ru^II or changing the solvent to dichloromethane effectively slows down ligand exchange. The results nicely demonstrate the utility of substituent parameters, originally developed for linear free‐energy relationships to explain reactivity in organic reactions, in coordination chemistry, and to illustrate the potential to custom‐design btp ligands and complexes thereof with predictable properties. The fast equilibration of the [Fe(btp)₂]²⁺ complexes together with their tunable stability and interesting magnetic properties should enable the design of dynamic metallosupramolecular materials with advantageous properties.     

Thermodynamics of interactions of vancomycin and synthetic surrogates of bacterial cell wall

Glycopeptide antibiotics, including vancomycin, form complexes via a set of five hydrogen bonds with the acyl-l-Lys-d-Ala-d-Ala portion of the peptidyl stems of the bacterial cell wall peptidoglycan. This complexation deprives the organism from the ability to cross-link peptidyl stems of the peptidoglycan, leading to bacterial cell death. Four synthetic fragments as surrogates of the components of the bacterial cell wall have been prepared in our lab in multistep syntheses. These synthetic samples were used in investigations of the thermodynamics properties (DeltaG degrees , DeltaH degrees , and TDeltaS degrees ) for the complexation with vancomycin by isothermal titration calorimetry (ITC). Complexation with the glycopeptide analogues is largely enthalpy-driven (formation of five hydrogen bonds), and in the analogues with a single peptidyl stem, the complexation is 1:1. The complexation is more complicated with an approximately 2 kDa cell wall surrogate (compound 4), which possesses two peptidyl stems. The data were suggestive of interactions between the two vancomycin molecules, with an entropic penalty attributable to restriction of molecular movements within the complex due to restriction of motion of the highly mobile acyl-d-Ala-d-Ala moiety of the peptidyl stems. These data were reconciled with the recently determined NMR solution structure for the peptidoglycan fragment 4 and its implications for the larger cell wall.     

链式与面式两种不对称疏水结构表面活性剂之间的相互作用热力学

本文通过等温滴定量热法(ITC)、电导法和浊度法研究了阴离子生物表面活性剂脱氧胆酸钠(NaDC)及其与相反电荷的十二烷基三甲基溴化铵(DTAB)在水溶液中的自组装热力学.ITC结果支持了NaDC在水溶液中先生成预胶束再形成稳定胶束的分步聚集模型,由此得到了NaDC的预胶束和胶束化过程的一系列热力学参数,并讨论了它们形成的热力学机理.进一步研究了具有头-尾链式和疏水-亲水刚性面式非对称结构的DTAB/NaDC混合体系的聚集热力学行为,得到了富NaDC临界混合胶束浓度(cmcmix)、富DTAB临界胶束浓度(CM)及对应过程的转变焓.结果表明,NaDC面式结构与DTAB链式结构的对称性差异以及相反电荷的相互作用,导致混合体系有别于单一表面活性剂或头-尾链式结构的混合体系的聚集行为.混合溶液的聚集行为受控于表面活性剂浓度和摩尔分数的变化.富NaDC胶束化过程为熵驱动,而富DTAB的两种胶束形态转变过程为熵焓共同驱动的热力学机理.这些结果对于从热力学角度认识胆汁酸盐的自组装机理以及与传统的头-尾链式结构的表面活性剂相互作用机理和相行为有重要的意义.     

Solution thermodynamics of Lanthanide–Cryptand 222 complexation processes

The thermodynamics of trivalent cations (Y³⁺, La³⁺, Pr³⁺, Nd³⁺, Eu³⁺, Gd³⁺, Tb³⁺, Ho³⁺, Er³⁺, Yb³⁺) and cryptand 222 in acetonitrile at 298.15?K is discussed. Recent reports regarding the behavior of lanthanide(III) trifluoromethane sulfonate salts in acetonitrile are considered. Thus, the experimental work was carried out under conditions in which ions (M³⁺) are predominantly in solution. Therefore, conductiometric titrations were carried out to establish the composition of the cation–cryptand 222 complexes and their ionic behavior in solution. Stability constants and derived standard Gibbs energies, enthalpies and entropies were determined by competitive titration microcalorimetry. Previously reported thermodynamic data for the complexation of cryptand 222 and a few lanthanide cations (La³⁺, Pr³⁺ and Nd³⁺) in acetonitrile are revisited. The medium effect on the stability of complex formation in acetonitrile relative to N,N-dimethylformamide is demonstrated. Thus, a drop in stability by a factor of 8 × 10¹⁰ is observed for the latter relative to the former solvent. The selectivity of cryptand 222 for these cations relative to La³⁺ in acetonitrile is discussed.     

Synthesis and Characterization of Cationic Low‐Valent Gallium Complexes of Cryptand[2.2.2]

The synthesis and characterization of two bimetallic, cationic low‐valent gallium–cryptand[2.2.2] complexes is reported. The reaction of cryptand[2.2.2] with Ga₂Cl₄ gave two different cations, [Ga₃Cl₄(crypt‐222)]⁺ ( 1 ) or [Ga₂Cl₂(crypt‐222)]²⁺ ( 2 ), depending on whether or not trimethylsilyl triflate (Me₃SiOTf) was added as a co‐reagent. Complexes 1 and 2 are the first examples of bimetallic cryptand[2.2.2] complexes, as well as the first low‐valent gallium–cryptand[2.2.2] complexes. Computational methods were used to evaluate the bonding in the gallium cores.     

Thallium pi-cation complexation by calix[4]tubes: (205)Tl NMR and x-ray evidence

Thallium cation complexation by calix[4]tubes has been investigated by a combination of (205)Tl, (1)H NMR and ES MS demonstrating the solution formation of a dithallium complex in which the cations are held in the calix[4]arene cavities. In addition, the structure of the complex has been determined in the solid state revealing the cations to be held exclusively by pi-cation interactions. Furthermore, this crystal structure has been used as the basis for molecular dynamics simulations to confirm that binding of the smaller K(+) cation in the calix[4]tube cryptand like array occurs via the axial route featuring a pi-cation intermediate.