Critical Evaluation of Adsorption–Desorption Hysteresis of Heavy Metal Ions from Carbon Nanotubes: Influence of Wall Number and Surface Functionalization

Single‐, double‐, and multi‐walled carbon nanotubes (SWCNTs, DWCNTs, and MWCNTs), and two oxidized MWCNTs with different oxygen contents (2.51 wt % and 3.5 wt %) were used to study the effect of the wall number and surface functionalization of CNTs on their adsorption capacity and adsorption–desorption hysteresis for heavy metal ions (Ni^II, Cd^II, and Pb^II). Metal ions adsorbed on CNTs could be desorbed by lowering the solution pH. Adsoprtion of heavy metal ions was not completely reversible when the supernatant was replaced with metal ion‐free electrolyte solution. With increasing wall number and amount of surface functional groups, CNTs had more surface defects and exhibited higher adsorption capacity and higher adsorption–desorption hysteresis index (HI) values. The coverage of heavy metal ions on the surface of CNTs, solution pH, and temperature affect the metal ion adsorption–desorption hysteresis. A possible shift in the adsorption mechanism from mainly irreversible to largely reversible processes may take place, as the amount of metal ions adsorbed on CNTs increases. Heavy metal ions may be irreversibly adsorbed on defect sites.     

Ultrafast Removal of Cadmium(II) by Green Cyclodextrin Metal–Organic‐Framework‐Based Nanoporous Carbon: Adsorption Mechanism and Application

Water contaminated with heavy metals has been identified as a significant threat to human health. Therefore, the development of safe and rapid water‐treatment techniques is necessary. We have synthesized an eco‐friendly γ‐cyclodextrin metal–organic framework (MOF)‐based nanoporous carbon (γ‐CD MOF‐NPC) material, conducted a comprehensive characterization of it, and found its rapid and effective Cd^II‐removal capacity. The γ‐CD MOF‐NPC could effectively sequester a majority of cadmium ions within one minute, and it still demonstrated excellent adsorption ability under various conditions, including different pH, adsorbent dosage, and coexistent ions. The maximum adsorption capacity was calculated to be 140.85 mg g^?1 by means of the Langmuir model. The adsorption was primarily due to the effect of ion exchange of oxygen‐containing functional groups, as determined by studying the ζ potential and Fourier transform infrared spectroscopy. Flow‐through experiments further proved the rapid Cd^II‐removal capacity and potential of the practical application of γ‐CD MOF‐NPC in water treatment according to the cytotoxic data.     

CC Bonding of Graphene Oxide on 4‐Aminophenyl Modified Gold Electrodes towards Simultaneous Detection of Heavy Metal Ions

This paper studied the electrochemical sensors based on C? C bonding of graphene oxide (GO) on π‐conjugated aromatic group modified gold electrodes for simultaneous detection of heavy metal ions. For comparison, another sensing interface Au‐Ph‐NH‐CO‐GO, in which GO was modified to Au‐Ph‐NH₂ interfaces by amide bonding. On the basis of the principle of heavy metal ions complexation with oxygenated species on GO, the fabricated sensing interfaces were used for the simultaneous determination of Pb²⁺, Cu²⁺ and Hg²⁺. The performance of two sensing interfaces for simultaneous detection of three metal ions was compared. Au‐Ph‐GO sensing interface demonstrated higher sensitivity and better repeatability than Au‐Ph‐NH‐CO‐GO sensing interface.     

Nanoscale Zero‐Valent Iron Particles Supported on Reduced Graphene Oxides by Using a Plasma Technique and Their Application for Removal of Heavy‐Metal Ions

Nanoscale zero‐valent iron particles supported on reduced graphene oxides (NZVI/rGOs) from spent graphene oxide (GO)‐bound iron ions were developed by using a hydrogen/argon plasma reduction method to improve the reactivity and stability of NZVI. The NZVI/rGOs exhibited excellent water treatment performance with excellent removal capacities of 187.16 and 396.37 mg g^?1 for chromium and lead, respectively. Moreover, the NZVI/rGOs could be regenerated by plasma treatment and maintained high removal ability after four cycles. X‐ray photoelectron spectroscopy analysis results implied that the removal mechanisms could be attributed to adsorption/precipitation, reduction, or both. Such multiple removal mechanisms by the NZVI/rGOs were attributed to the reduction ability of the NZVI particles and the role of dispersing and stabilizing abilities of the rGOs. The results indicated that the NZVI/rGOs prepared by a hydrogen/argon plasma reduction method might be an effective composite for heavy‐metal‐ion removal.     

Tetrahydroxy‐Perylene Bisimide Embedded in a Zinc Oxide Thin Film as an Electron‐Transporting Layer for High‐Performance Non‐Fullerene Organic Solar Cells

By introduction of four hydroxy (HO) groups into the two perylene bisimide (PBI) bay areas, new HO‐PBI ligands were obtained which upon deprotonation can complex Zn^II ions and photosensitize semiconductive zinc oxide thin films. Such coordination is beneficial for dispersing PBI photosensitizer molecules evenly into metal oxide films to fabricate organic–inorganic hybrid interlayers for organic solar cells. Supported by the photoconductive effect of the ZnO: HO‐PBI hybrid interlayers, improved electron collection and transportation is achieved in fullerene and non‐fullerene polymer solar cell devices, leading to remarkable power conversion efficiencies of up to 15.95 % for a non‐fullerene based organic solar cell.     

Efficient Removal of Cobalt(II) and Strontium(II) Metals from Water using Ethylene Diamine Tetra‐acetic Acid Functionalized Graphene Oxide

Graphene oxide (GO) with high specific surface area was prepared and functionalized with ethylene diamine tetra‐acetic acid (EDTA). The as‐prepared GO and the functionalized one (GO‐EDTA) were characterized using high resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), and Raman spectroscopy. The as‐prepared and EDTA funcationalized GO were applied as adsorbent to remove strontium(II) and cobalt(II) from water. The results indicated that the prepared materials are efficient adsorbents for strontium(II) and cobalt(II) removal. The adsorption of Co^II and Sr^II under effects of contact time, temperature, and pH was investigated It is concluded that the maximum adsorption capacities of GO for Co^II and Sr^II were about 168 and 140 mg · g^–1, whereas of GO‐EDTA the values were about 197 and 158 mg · g^–1, respectively. It is indicated that pH 6 and temperature 40 °C are the best condition for Co^II and Sr^II removal from water. The application of Langmuir and Freundlich isotherms indicated that Langmuir isotherm is best fit for Co^II and Sr^II equilibrium adsorption. Adsorption kinetics were studied by applying pseudo first‐order, pseudo second‐order, and intraparticle diffusion models on the experimental data. The results proved that pseudo second‐order model is the best represented adsorption kinetics. Appling the intraparticle diffusion regressions on the experimental data indicated that intraparticle diffusion involved in adsorption process, which was not the only rate‐controlling step.     

Structural Adaptability of Zinc Binding Sites: Different Structures in Partially,Fully, and Heavy‐Metal Loaded States

The present study demonstrates that both the nature (Zn^II, Cd^II or Hg^II) and supply of metal ions determine whether zinc fingers fold into the well‐known, fully loaded structures or alternatively populate a variety of structural states under substoichiometric conditions. Metal‐bridged species are observed by perturbed angular correlation (PAC), EXAFS, UV spectroscopy, and stopped‐flow kinetics. Transitions between structural states as adaptive reactions to changed metal‐ion supply might represent intelligent system changes in zinc homeostasis, trafficking and signalling, and reflect features of heavy‐metal toxicity at the molecular level. Because the zinc fingers exist in structural states that are different from the metal‐free and fully loaded species, the prevailing view on metal‐mediated molecular regulation in terms of “on and off control” might be oversimplified.     

A Dinuclear Mercury(II)‐Mediated Base Pair in DNA

The first dinuclear metal‐mediated base pair containing divalent metal ions has been prepared. A combination of the neutral bis(monodentate) purine derivative 1,N⁶‐ethenoadenine (ϵA), which preferentially binds two metal ions with a parallel alignment of the N−M bonds, and the canonical nucleobase thymine (T), which readily deprotonates in the presence of Hg^II and thereby partially compensates the charge accumulation due to the two closely spaced divalent metal ions, yields the dinuclear T‐Hg^II₂‐ϵA base pair. This metal‐mediated base pair stabilizes the DNA oligonucleotide duplex as shown by an increase of 8 °C in its melting temperature. Formation of the base pair was demonstrated by temperature‐dependent UV spectroscopy as well as by titration experiments monitored by UV and CD spectroscopy.     

CaII Binding Regulates and Dominates the Reactivity of a Transition‐Metal‐Ion‐Dependent Diesterase from Mycobacterium tuberculosis

The diesterase Rv0805 from Mycobacterium tuberculosis is a dinuclear metallohydrolase that plays an important role in signal transduction by controlling the intracellular levels of cyclic nucleotides. As Rv0805 is essential for mycobacterial growth it is a promising new target for the development of chemotherapeutics to treat tuberculosis. The in vivo metal‐ion composition of Rv0805 is subject to debate. Here, we demonstrate that the active site accommodates two divalent transition metal ions with binding affinities ranging from approximately 50 nm for Mn^II to about 600 nm for Zn^II. In contrast, the enzyme GpdQ from Enterobacter aerogenes, despite having a coordination sphere identical to that of Rv0805, binds only one metal ion in the absence of substrate, thus demonstrating the significance of the outer sphere to modulate metal‐ion binding and enzymatic reactivity. Ca^II also binds tightly to Rv0805 (K_d≈40 nm ), but kinetic, calorimetric, and spectroscopic data indicate that two Ca^II ions bind at a site different from the dinuclear transition‐metal‐ion binding site. Ca^II acts as an activator of the enzymatic activity but is able to promote the hydrolysis of substrates even in the absence of transition‐metal ions, thus providing an effective strategy for the regulation of the enzymatic activity.     

Formation and Dynamic Behavior of Mono‐ and Bimetallic Cadmium(II) Porphyrin Complexes: Allosteric Control of Coupled Intraligand Metal Migrations

The complexation behavior of a bis‐strapped porphyrin ligand ( 1 ) towards Cd^II has been investigated by ¹H and ¹¹³Cd NMR spectroscopy with the help of X‐ray diffraction structures. The presence of an overhanging carboxylic acid group on each side of the macrocycle is responsible for the instantaneous insertion of the metal ion(s) at room temperature, and allows the formation of bimetallic species with unusual coordination modes at the origin of unique dynamic behaviors. In the absence of base, a C₂‐symmetric bimetallic complex ( 1Cd₂ ) is readily formed, in which the porphyrin acts as a bridging ligand. Both Cd^II ions are bound to the N core and to a COO^? group of a strap. In contrast, the presence of a base induces a two‐step binding process with the successive formation of mono and bimetallic species ( 1^Cd and 1_Cd?CdOAc ). Formally, a Cd^II ion is first inserted into the N core and experiences a strong out‐of‐plane (OOP) displacement due to the binding of an overhanging carbonyl group in an apical position. A second Cd^II ion then binds exclusively to the strap on the opposite side, in a so‐called hanging‐atop (HAT) coordination mode. These two complexes display a fluxional behavior that relies on intraligand migration processes of the metal ion(s). In 1^Cd , the Cd^II ion exchanges between the two equivalent overhanging apical ligands by funneling through the porphyrin ring. In 1_Cd?CdOAc , the two Cd^II ions exchange their coordination mode (HAT?OOP) in a concerted way while staying on their respective side of the macrocycle, in a so‐called Newton’s cradle‐like motion. The intramolecular pathway was notably evidenced by variable temperature ¹¹³Cd heteronuclear NMR experiments. This coupled motion of the Cd^II cations is under allosteric control; the addition of an acetate anion (the allosteric effector) to the “resting” C₂‐symmetric complex 1Cd₂ affords the dissymmetric complex 1_Cd?CdOAc and triggers equilibrium between its two degenerate states. The rate of the swinging motion further depends on the concentration of AcO^?, with a higher concentration leading to a slower motion. As compared with the related Pb^II and Bi^III bimetallic complexes, the Newton’s cradle‐like motion proceeds faster with the smaller Cd^II ion. These results open the way to novel multistable devices and switches.     

Design of Ratiometric Fluorescent Probes Based on Arene–Metal‐Ion Interactions and Their Application to CdII and Hydrogen Sulfide Imaging in Living Cells

Non‐coordinative interactions between a metal ion and the aromatic ring of a fluorophore can act as a versatile sensing mechanism for the detection of metal ions with a large emission change of fluorophores. We report the design of fluorescent probes based on arene–metal‐ion interactions and their biological applications. This study found that various probes having different fluorophores and metal binding units displayed significant emission redshift upon complexation with metal ions, such as Ag^I, Cd^II, Hg^II, and Pb^II. X‐ray crystallography of the complexes confirmed that the metal ions were held in close proximity to the fluorophore to form an arene–metal‐ion interaction. Electronic structure calculations based on TDDFT offered a theoretical basis for the sensing mechanism, thus showing that metal ions electrostatically modulate the energy levels of the molecular orbitals of the fluorophore. A fluorescent probe was successfully applied to the ratiometric detection of the uptake of Cd^II ions and hydrogen sulfide (H₂S) in living cells. These results highlight the utility of interactions between arene groups and metal ions in biological analyses.     

Synthesis,Characterization, Crystal Structure,and Biological Activities of Transition Metal Complexes with 1‐Phenyl‐3‐methyl‐5‐hydroxypyrazole‐4‐methylene‐8′‐quinolineimine

The Schiff base ligand, 1‐phenyl‐3‐methyl‐5‐hydroxypyrazole‐4‐methylene‐8′‐quinolineimine, and its Cu^II, Zn^II, and Ni^II complexes were synthesized and characterized. The crystal structure of the Zn^II complex was determined by single‐crystal X‐ray diffraction, indicating that the metal ions and Schiff base ligand can form mononuclear six‐coordination complexes with 1:1 metal‐to‐ligand stoichiometry at the metal ions as centers. The binding mechanism and affinity of the ligand and its metal complexes to calf thymus DNA (CT DNA) were investigated by UV/Vis spectroscopy, fluorescence titration spectroscopy, EB displacement experiments, and viscosity measurements, indicating that the free ligand and its metal complexes can bind to DNA via an intercalation mode with the binding constants at the order of magnitude of 105–106 M ^–1, and the metal complexes can bind to DNA more strongly than the free ligand alone. In addition, antioxidant activities of the ligand and its metal complexes were investigated through scavenging effects for hydroxyl radical in vitro, indicating that the compounds show stronger antioxidant activities than some standard antioxidants, such as mannitol. The ligand and its metal complexes were subjected to cytotoxic tests, and experimental results indicated that the metal complexes show significant cytotoxic activity against lung cancer A 549 cells.     

Removal of Toxic Metal‐Ion Pollutants from Water by Using Chemically Modified Carbon Powders

The thermodynamics of and the kinetic parameters controlling the sequestration of the toxic heavy‐metal ion Cd^II from aqueous media by using a novel material consisting of glassy carbon microspheres (10–20 μm in diameter) chemically modified with L ‐cysteine methyl ester are presented. In an effort to reduce the cost and increase the efficiency of toxic‐metal‐ion removal, this modification strategy was expanded to attach L ‐cysteine methyl chemically ester to less‐expensive graphite powders (2–20 μm in diameter), and the thermodynamic and kinetic parameters of the sequestration of Cd^II, Cu^II, and As^III toxic metal ions are presented. It was found that the use of chemically modified graphite powder greatly increased both the rate and the amount of metal ions removed from aqueous media. This work has important potential applications to filtration of drinking water and environmental remediation.     

Metal(II) Ion Complexes with 5‐(Pyrazin‐2‐yl)‐2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thione; Synthesis,Structural Characterization,Acid‐base,and Complexing Properties in Solution

The study reports the synthesis of complexes Co(HL)Cl₂ ( 1 ), Ni(HL)Cl₂ ( 2 ), Cu(HL)Cl₂ ( 3 ), and Zn(HL)₃Cl₂ ( 4 ) with the title ligand, 5‐(pyrazin‐2‐yl)‐1,2,4‐triazole‐5‐thione (HL), and their characterization by elemental analyses, ESI‐MS (m/z), FT‐IR and UV/Vis spectroscopy, as well as EPR in the case of the Cu^II complex. The comparative analysis of IR spectra of the metal ion complexes with HL and HL alone indicated that the metal ions in 1 , 2 , and 3 are chelated by two nitrogen atoms, N(4) of pyrazine and N(5) of triazole in the thiol tautomeric form, whereas the Zn^II ion in 4 is coordinated by the non‐protonated N(2) nitrogen atom of triazole in the thione form. pH potentiometry and UV/Vis spectroscopy were used to examine Co^II, Ni^II, and Zn^II complexes in 10/90 (v/v) DMSO/water solution, whereas the Cu^II complex was examined in 40/60 (v/v) DMSO/water solution. Monodeprotonation of the thione triazole in solution enables the formation of the L:M = 1:1 species with Co^II, Ni^II and Zn^II, the 2:1 species with Co^II and Zn^II, and the 3:1 species with Zn^II. A distorted tetrahedral arrangement of the Cu^II complex was suggested on the basis of EPR and Vis/NIR spectra.     

改性氧化石墨烯去除重金属离子的分子动力学模拟

通过硅烷化反应在氧化石墨烯(Graphene oxide, GO) 表面嫁接螯合官能团N-(三甲氧基硅丙烷)乙二胺三酸(EDTA-Si), 得到改性氧化石墨烯(GO-EDTA), 采用分子动力学模拟在分子水平上研究了Pb²⁺在GO-EDTA 表面的动态吸附分布、 构象及动力学性质, 比较了Pb²⁺和单价Na⁺离子在氧化石墨烯上的吸附行为, 模拟了GO-EDTA与Ca²⁺相互作用, 与Pb²⁺的吸附行为进行了对比. 模拟结果表明, Pb²⁺和Na⁺的吸附位点是GO-EDTA 体系中的羧基, 而非氧化石墨烯表面的羟基; Pb²⁺和 Na⁺ 与羧基的吸附构象不同, 前者吸附构象以摩尔比2:1为主, 即两个羧基对一个Pb²⁺离子, 而后者更多倾向于摩尔比1:1的吸附模式, 即一个羧基对一个Na⁺离子; Pb²⁺离子相对于Ca²⁺和Na⁺离子, 形成的COO^--Pb²⁺离子对构象越过的能垒最低, 但是破坏该离子对构象时能垒较高, 表明Pb²⁺离子在氧化石墨烯膜上表现出良好的吸附性.     

Fluorescence chemical sensor based on water‐soluble poly(p‐phenylene ethynylene)–graphene oxide composite for Cu2+

A chemical sensor for metal ions was fabricated based on a water‐soluble conjugated polymer–graphene oxide (GO) composite. Water‐soluble poly(p‐phenylene ethynylene) (PPE) with sulfonic acid side chain groups was used to prepare a very stable water‐soluble PPE–GO composite with strong π–π interactions in water. The relationship between the optical properties and metal ion sensing capability of the PPE–GO composite in aqueous solution was investigated. Addition of metal ions enhanced the fluorescence intensity of the composite, and, in particular, the composite enabled the fluorescence detection of Cu²⁺ in aqueous solutions with high selectivity and sensitivity. Therefore, this conjugated polymer–GO composite sensor system was found to be an effective turn‐on type chemical sensor for metal ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of LnII‐in‐Cryptand Complexes by Chemical Reduction of LnIII‐in‐Cryptand Precursors: Isolation of a NdII‐in‐Cryptand Complex

Lanthanide triflates have been used to incorporate Nd^III and Sm^III ions into the 2.2.2‐cryptand ligand (crypt) to explore their reductive chemistry. The Ln(OTf)₃ complexes (Ln=Nd, Sm; OTf=SO₃CF₃) react with crypt in THF to form the THF‐soluble complexes [Ln^III(crypt)(OTf)₂][OTf] with two triflates bound to the metal encapsulated in the crypt. Reduction of these Ln^III‐in‐crypt complexes using KC₈ in THF forms the neutral Ln^II‐in‐crypt triflate complexes [Ln^II(crypt)(OTf)₂]. DFT calculations on [Nd^II(crypt)]²⁺], the first Nd^II cryptand complex, assign a 4f⁴ electron configuration to this ion.     

Development of a Metal‐Ion‐Mediated Base Pair for Electron Transfer in DNA

A new C‐nucleoside structurally based on the hydroxyquinoline ligand was synthesized that is able to form stable pairs in DNA in both the absence and the presence of metal ions. The interactions between the metal centers in adjacent Cu^II‐mediated base pairs in DNA were probed by electron paramagnetic resonance (EPR) spectroscopy. The metal–metal distance falls into the range of previously reported values. Fluorescence studies with a donor–DNA–acceptor system indicate that photoinduced charge‐transfer processes across these metal‐ion‐mediated base pairs in DNA occur more efficiently than over natural base pairs.     

Acid–Base‐Controlled Stereoselective Metalation of Overhanging Carboxylic Acid Porphyrins: Consequences for the Formation of Heterobimetallic Complexes

Overhanging carboxylic acid porphyrins have revealed promising ditopic ligands offering a new entry in the field of supramolecular coordination chemistry of porphyrinoids. Notably, the adjunction of a so‐called hanging‐atop (HAT) Pb^II cation to regular Pb^II porphyrin complexes allowed a stereoselective incorporation of the N‐core bound cation, and an allosterically controlled Newton’s cradle‐like motion of the two Pb^II ions also emerged from such bimetallic complexes. In this contribution, we have extended this work to other ligands and metal ions, aiming at understanding the parameters that control the HAT Pb^II coordination. The nature of the N‐core bound metal ion (Zn^II, Cd^II), the influence of the deprotonation state of the overhanging COOH group and the presence of a neutral ligand on the opposite side (exogenous or intramolecular), have been examined through ¹H NMR spectroscopic experiments with the help of radiocrystallographic structures and DFT calculations. Single and bis‐strap ligands have been considered. They all incorporate a COOH group hung over the N‐core on one side. For the bis‐strap ligands, either an ester or an amide group has been introduced on the other side. In the presence of a base, the mononuclear Zn^II or Cd^II complexes incorporate the carbonyl of the overhanging carboxylate as apical ligand, decreasing its availability for the binding of a HAT Pb^II. An allosteric effector (e.g., 4‐dimethylaminopyridine (DMAP), in the case of a single‐strap ligand) or an intramolecular ligand (e.g., an amide group), strong enough to compete with the carbonyl of the hung COO^?, is required to switch the N‐core bound cation to the opposite side with concomitant release of the COO^?, thereby allowing HAT Pb^II complexation. In the absence of a base, Zn^II or Cd^II binds preferentially the carbonyl of the intramolecular ester or amide groups in apical position rather than that of the COOH. This better preorganization, with the overhanging COOH fully available, is responsible for a stronger binding of the HAT Pb^II. Thus, either allosteric or acid–base control is achieved through stereoselective metalation of Zn^II or Cd^II. In the latter case, according to the deprotonation state of the COOH group, the best electron‐donating ligand is located on one or the other side of the porphyrin (COO^?>CONHR>COOR>COOH): the lower affinity of COOH for Zn^II and Cd^II, the higher for a HAT Pb^II. These insights provide new opportunities for the elaboration of innovative bimetallic molecular switches.     

L‐lysine and EDTA polymer mimics as resins for the quantitative and reversible removal of heavy metal ion water pollutants

Traditional precipitation methods for inorganic micropollutant removal from waters are increasingly being replaced by sorption methods based on both natural and synthetic materials. In this context, two novel effective heavy metal ions absorbers are presented. These resins, LYMA and LMT85, were crosslinked poly(amidoamine)s carrying amine and carboxyl groups in their repeating units. In particular, the LYMA‐repeating unit contains one carboxyl and two amine groups and is a mimic of L ‐lysine, whereas LMT85 contains two amine and five carboxyl groups and is a mimic of EDTA. Both resins were prepared at moderate cost by simple eco‐friendly procedures. The heavy metal ion set adopted as benchmark was Cu²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Ni²⁺, and Co²⁺. LYMA proved selective for Cu²⁺ and Ni²⁺, the other ions tested being negligibly absorbed, whereas LMT85 proved capable of rapidly and quantitatively absorbing all the ions tested either singly or in mixed solution. The absorption process was reversible, and the resins were easily regenerated by acidification. The absorption of several metal ions imparted intense coloring to the resins, a feature possibly exploitable for analytical purposes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012