Hexane Cracking over Steamed Phosphated Zeolite H‐ZSM‐5: Promotional Effect on Catalyst Performance and Stability

The nature behind the promotional effect of phosphorus on the catalytic performance and hydrothermal stability of zeolite H‐ZSM‐5 has been studied using a combination of ²⁷Al and ³¹P MAS NMR spectroscopy, soft X‐ray absorption tomography and n‐hexane catalytic cracking, complemented with NH₃ temperature‐programmed desorption and N₂ physisorption. Phosphated H‐ZSM‐5 retains more acid sites and catalytic cracking activity after steam treatment than its non‐phosphated counterpart, while the selectivity towards propylene is improved. It was established that the stabilization effect is twofold. First, the local framework silico‐aluminophosphate (SAPO) interfaces, which form after phosphatation, are not affected by steam and hold aluminum atoms fixed in the zeolite lattice, preserving the pore structure of zeolite H‐ZSM‐5. Second, the four‐coordinate framework aluminum can be forced into a reversible sixfold coordination by phosphate. These species remain stationary in the framework under hydrothermal conditions as well. Removal of physically coordinated phosphate after steam‐treatment leads to an increase in the number of strong acid sites and increased catalytic activity. We propose that the improved selectivity towards propylene during catalytic cracking can be attributed to local SAPO interfaces located at channel intersections, where they act as impediments in the formation of bulky carbenium ions and therefore suppress the bimolecular cracking mechanism.     

Direct Detection of Supramolecular Reaction Centers in the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 by 13C–27Al Solid‐State NMR Spectroscopy

Hydrocarbon‐pool chemistry is important in methanol to olefins (MTO) conversion on acidic zeolite catalysts. The hydrocarbon‐pool (HP) species, such as methylbenzenes and cyclic carbocations, confined in zeolite channels during the reaction are essential in determining the reaction pathway. Herein, we experimentally demonstrate the formation of supramolecular reaction centers composed of organic hydrocarbon species and the inorganic zeolite framework in H‐ZSM‐5 zeolite by advanced ¹³C–²⁷Al double‐resonance solid‐state NMR spectroscopy. Methylbenzenes and cyclic carbocations located near Brønsted acid/base sites form the supramolecular reaction centers in the zeolite channel. The internuclear spatial interaction/proximity between the ¹³C nuclei (associated with HP species) and the ²⁷Al nuclei (associated with Brønsted acid/base sites) determines the reactivity of the HP species. The closer the HP species are to the zeolite framework Al, the higher their reactivity in the MTO reaction.     

Location of Framework Al Atoms in the Channels of ZSM‐5: Effect of the (Hydrothermal) Synthesis

²⁷Al 3Q MAS NMR and UV/Vis spectroscopy with bare Co^II ions as probes of Al pairs in the zeolite framework were employed to analyze the location of framework Al atoms in the channel system of zeolite ZSM‐5. Furthermore, the effect of Na⁺ ions together with tetrapropylammonium cation (TPA⁺) in the ZSM‐5 synthesis gel on the location of Al in the channel system was investigated. Zeolites prepared using exclusively TPA⁺ as a structure‐directing agent (i.e., in the absence of Na⁺ ions) led to 55–90 % of Al atoms located at the channel intersection, regardless the presence or absence of Al pairs [Al?O?(Si?O)₂?Al sequences in one ring] in the zeolite framework. The presence of Na⁺ ions in the synthesis gel did not modify the Al location at the channel intersection (55–95 % of Al atoms) and led only to changes in i) the distribution of framework Al atoms between Al pairs (decrease) and single isolated Al atoms (increase), and ii) the siting of Al in distinguishable framework tetrahedral sites.     

1D to 3D NMR study of microporous alumino‐phosphate AlPO4‐40

From one‐ to two‐ and three‐dimensional MAS NMR solid‐state experiments involving ³¹P and ²⁷Al, we show that the structure of microporous alumino‐phosphate AlPO₄‐40 contains at least four times more sites than expected, and we attribute two types of Al_IV sites. The newly described ²⁷Al‐³¹P MQ‐HMQC opens new possibilities of describing details of three‐dimensional bounded networks. Copyright © 2009 John Wiley & Sons, Ltd.     

Extra‐Framework Aluminum‐Assisted Initial C−C Bond Formation in Methanol‐to‐Olefins Conversion on Zeolite H‐ZSM‐5

Surface methoxy species bound to an extra‐framework Al (SMS‐EFAL) was unambiguously identified by advanced ¹³C‐{²⁷Al} double‐resonance solid‐state NMR technique in the methanol‐to‐olefins reaction on H‐ZSM‐5 zeolite. The high reactivity of the SMS‐EFAL leads to the formation of surface ethoxy species and ethanol as the key intermediates for ethene generation in the early reaction stage. A direct route for the initial C?C bond formation in ethene was proposed and corroborated by density functional theory calculations.     

Thermodynamics of Carbon Dioxide Adsorption on the Protonic Zeolite H‐ZSM‐5

Adsorption of carbon dioxide on H‐ZSM‐5 zeolite (Si:Al=11.5:1) was studied by means of variable‐temperature FT‐IR spectroscopy, in the temperature range of 310–365 K. The adsorbed CO₂ molecules interact with the zeolite Brønsted‐acid OH groups bringing about a characteristic red‐shift of the O? H stretching band from 3610 cm^?1 to 3480 cm^?1. Simultaneously, the ν₃ mode of adsorbed CO₂ is observed at 2345 cm^?1. From the variation of integrated intensity of the IR absorption bands at both 3610 and 2345 cm^?1, upon changing temperature (and CO₂ equilibrium pressure), the standard adsorption enthalpy of CO₂ on H‐ZSM‐5 is ΔH⁰=?31.2(±1) kJ mol^?1 and the corresponding entropy change is ΔS⁰=?140(±10) J mol^?1 K^?1. These results are discussed in the context of available data for carbon dioxide adsorption on other protonic, and also alkali‐metal exchanged, zeolites.     

The Effect of Ge Incorporation on the Brønsted Acidity of ZSM‐5

The effect of the isomorphous substitution of some of the Si atoms in ZSM‐5 by Ge atoms on the Brønsted acid strength has been investigated by i) DFT calculations on cluster models of the formula ((HO)₃SiO)₃‐Al‐O(H)‐T‐(OSi(OH)₃)₃, with T=Si or Ge, and ((HO)₃SiO)₃‐Al‐O(H)‐Si‐(OGe(OH)₃)(OSi(OH)₃)₂, ii) a ³¹P NMR study of zeolite samples contacted with trimethyl phosphine oxide probe molecules and iii) a X‐ray photoelectron spectroscopy (XPS) study of ZSM‐5 and Ge‐ZSM‐5 samples. The calculations reveal that the effect of Ge incorporation on the framework acidity strongly depends on the degree of substitution and on the exact T‐atom positions that are occupied by Ge. High Ge concentrations allow for enhanced stabilisation of the deprotonated Ge‐ZSM‐5 through structural relaxation, resulting in a slightly higher acidity as compared to ZSM‐5. This structural relaxation is not achievable in Ge‐ZSM‐5 with a low Ge content, which therefore has a slightly lower acidity than ZSM‐5. The NMR study indicates no difference between the Brønsted acidity of ZSM‐5(47) and Ge(0.09)ZSM‐5(36). Instead, evidence for the presence of a substantial amount of Ge? OH groups in the Ge‐containing samples was obtained from the NMR results, which is consistent with earlier FTIR studies. The XPS results do not point to an effect of Ge on the framework acidity of ZSM‐5(47), instead, the results can be best interpreted by assuming the presence of additional Ge? OH and Si? OH groups near the surface of the Ge(0.08)ZSM‐5(47) sample.     

Theoretical study of the adsorption of ethylene on alkali‐exchanged zeolites

The structures of alkali‐exchanged faujasite (X–FAU, X = Li⁺ or Na⁺ ion) and ZSM‐5 (Li–ZSM‐5) zeolites and their interactions with ethylene have been investigated by means of quantum cluster and embedded cluster approaches at the B3LYP/6‐31G(d, p) level of theory. Inclusion of the Madelung potential from the zeolite framework has a significant effect on the structure and interaction energies of the adsorption complexes and leads to differentiation of different types of zeolites (ZSM‐5 and FAU) that cannot be drawn from a typical quantum cluster model, H₃SiO(X)Al(OH)₂OSiH₃. The Li–ZSM‐5 zeolite is predicted to have a higher Lewis acidity and thus higher ethylene adsorption energy than the Li–FAU zeolites (16.4 vs. 14.4 kcal/mol), in good agreement with the known acidity trend of these two zeolites. On the other hand, the cluster models give virtually the same adsorption energies for both zeolite complexes (8.9 vs. 9.1 kcal/mol). For the larger cation‐exchanged Na–FAU complex, the adsorption energy (11.6 kcal/mol) is predicted to be lower than that of Li–FAU zeolites, which compares well with the experimental estimate of about 9.6 kcal/mol for ethylene adsorption on a less acidic Na–X zeolite. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 333–340, 2003     

异丁烯在不同硅铝比的NanZSM-5型分子筛中的吸附：分子模拟研究

Frameworks of NanZSM-5 type zeolites with various Si/A1 ratios have been constructed and optimized with molecular dynamic quench simulation. The results show that the structure parameters of NanZSM-5 type zeolite, including the bond length and atomic charges, are consistent with those predicted by ab initio cluster calculations. It was also observed that atomic charges of Si atoms were shifted to higher field in NanZSM-5 type zeolite with lower Si/Al ratio. Then, the adsorption of isobutene on NanZSM-5 with various Si/Al ratios has been investigated using grand canonical ensemble Monte Carlo simulation and Cvff-300-1.01 forcefield. The simulated adsorption amount was in good agreement with the experimental data. Based on these facts, the effects of Si/Al ratio on the adsorption amount and adsorption isotherms of isobutene on NanZSM-5 were predicted. The results indicated that Si/Al ratio was important for the adsorption of isobutene and the adsorption amount was decreased as the Si/Al ratio was increased, which can be explained that the atomic charge of Na^＋ cation would influence greatly the π electrons of the isobutene double bond due to the Coulomb force. In addition, the adsorption sites of isobutene and interaction energy of isobutene with NanZSM-5 were also discussed.     

Mechanism Studies of the Conversion of 13C‐Labeled n‐Butane on Zeolite H‐ZSM‐5 by Using 13C Magic Angle Spinning NMR Spectroscopy and GC–MS Analysis

By using ¹³C MAS NMR spectroscopy (MAS=magic angle spinning), the conversion of selectively ¹³C‐labeled n‐butane on zeolite H‐ZSM‐5 at 430–470 K has been demonstrated to proceed through two pathways: 1) scrambling of the selective ¹³C‐label in the n‐butane molecule, and 2) oligomerization–cracking and conjunct polymerization. The latter processes (2) produce isobutane and propane simultaneously with alkyl‐substituted cyclopentenyl cations and condensed aromatic compounds. In situ ¹³C MAS NMR and complementary ex situ GC–MS data provided evidence for a monomolecular mechanism of the ¹³C‐label scrambling, whereas both isobutane and propane are formed through intermolecular pathways. According to ¹³C MAS NMR kinetic measurements, both pathways proceed with nearly the same activation energies (E_a=75 kJ mol^?1 for the scrambling and 71 kJ mol^?1 for isobutane and propane formation). This can be rationalized by considering the intermolecular hydride transfer between a primarily initiated carbenium ion and n‐butane as being the rate‐determining stage of the n‐butane conversion on zeolite H‐ZSM‐5.     

Identification of tert‐Butyl Cations in Zeolite H‐ZSM‐5: Evidence from NMR Spectroscopy and DFT Calculations

Experimental evidence for the presence of tert‐butyl cations, which are important intermediates in acid‐catalyzed heterogeneous reactions, on solid acids has still not been provided to date. By combining density functional theory (DFT) calculations with ¹H/¹³C magic‐angle‐spinning NMR spectroscopy, the tert‐butyl cation was successfully identified on zeolite H‐ZSM‐5 upon conversion of isobutene by capturing this intermediate with ammonia.     

A Simple Route to Synthesize Mesoporous ZSM‐5 Templated by Ammonium‐Modified Chitosan

Uniform mesoporous zeolite ZSM‐5 crystals have been successfully fabricated through a simple hydrothermal synthetic method by utilizing ammonium‐modified chitosan and tetrapropylammonium hydroxide (TPAOH) as the meso‐ and microscale template, respectively. It was revealed that mesopores with diameters of 5–20 nm coexisted with microporous network within mesoporous ZSM‐5 crystals. Ammonium‐modified chitosan was demonstrated to serve as a mesoporogen, self‐assembling with the zeolite precursor through strong static interactions. As expected, the prepared mesoporous ZSM‐5 exhibited greatly enhanced catalytic activities compared with conventional ZSM‐5 and Al‐MCM‐41 in reactions involving bulky molecules, such as the Claisen–Schmidt condensation of 2‐hydroxyacetophenone with benzaldehyde and the esterification reaction of dodecanoic acid and 2‐ethylhexanol.     

Alkane Activation Initiated by Hydride Transfer: Co‐conversion of Propane and Methanol over H‐ZSM‐5 Zeolite

Co‐conversion of alkane with another reactant over zeolite catalysts has emerged as a new approach to the long‐standing challenge of alkane transformation. With the aid of solid‐state NMR spectroscopy and GC‐MS analysis, it was found that the co‐conversion of propane and methanol can be readily initiated by hydride transfer at temperatures of ≥449 K over the acidic zeolite H‐ZSM‐5. The formation of ¹³C‐labeled methane and singly ¹³C‐labeled n‐butanes in selective labeling experiments provided the first evidence for the initial hydride transfer from propane to surface methoxy intermediates. The results not only provide new insight into carbocation chemistry of solid acids, but also shed light on the low‐temperature transformation of alkanes for industrial applications.     

C−C Bond Formation in Syngas Conversion over Zinc Sites Grafted on ZSM‐5 Zeolite

Despite significant progress achieved in Fischer–Tropsch synthesis (FTS) technology, control of product selectivity remains a challenge in syngas conversion. Herein, we demonstrate that Zn²⁺‐ion exchanged ZSM‐5 zeolite steers syngas conversion selectively to ethane with its selectivity reaching as high as 86 % among hydrocarbons (excluding CO₂) at 20 % CO conversion. NMR spectroscopy, X‐ray absorption spectroscopy, and X‐ray fluorescence indicate that this is likely attributed to the highly dispersed Zn sites grafted on ZSM‐5. Quasi‐in‐situ solid‐state NMR, obtained by quenching the reaction in liquid N₂, detects C₂ species such as acetyl (‐COCH₃) bonding with an oxygen, ethyl (‐CH₂CH₃) bonding with a Zn site, and epoxyethane molecules adsorbing on a Zn site and a Brønsted acid site of the catalyst, respectively. These species could provide insight into C?C bond formation during ethane formation. Interestingly, this selective reaction pathway toward ethane appears to be general because a series of other Zn²⁺‐ion exchanged aluminosilicate zeolites with different topologies (for example, SSZ‐13, MCM‐22, and ZSM‐12) all give ethane predominantly. By contrast, a physical mixture of ZnO‐ZSM‐5 favors formation of hydrocarbons beyond C₃₊. These results provide an important guide for tuning the product selectivity in syngas conversion.     

New Insight into the Hydrocarbon‐Pool Chemistry of the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 from GC‐MS,Solid‐State NMR Spectroscopy,and DFT Calculations

Over zeolite H‐ZSM‐5, the aromatics‐based hydrocarbon‐pool mechanism of methanol‐to‐olefins (MTO) reaction was studied by GC‐MS, solid‐state NMR spectroscopy, and theoretical calculations. Isotopic‐labeling experimental results demonstrated that polymethylbenzenes (MBs) are intimately correlated with the formation of olefin products in the initial stage. More importantly, three types of cyclopentenyl cations (1,3‐dimethylcyclopentenyl, 1,2,3‐trimethylcyclopentenyl, and 1,3,4‐trimethylcyclopentenyl cations) and a pentamethylbenzenium ion were for the first time identified by solid‐state NMR spectroscopy and DFT calculations under both co‐feeding ([¹³C₆]benzene and methanol) conditions and typical MTO working (feeding [¹³C]methanol alone) conditions. The comparable reactivity of the MBs (from xylene to tetramethylbenzene) and the carbocations (trimethylcyclopentenyl and pentamethylbenzium ions) in the MTO reaction was revealed by ¹³C‐labeling experiments, evidencing that they work together through a paring mechanism to produce propene. The paring route in a full aromatics‐based catalytic cycle was also supported by theoretical DFT calculations.     

Synthesis and characterization of novel (9H‐fluoren‐9‐ylamino) carbonylaminomethylphosphonic acid

The new α‐aminophosphonic acids are synthesized, reacting (9H‐fluoren‐9‐yl)urea with formaldehyde and phosphorus trichloride. (9H‐Fluoren‐9‐yl)urea was prepared from spiro(fluoren‐9,4′‐imidazolidine)‐2′,5′‐dione by alkaline hydrolysis with Ba(OH)₂. The structure of the title compounds was proved by means of IR, ¹H, ¹³C, and ³¹P NMR spectroscopy. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:719–722, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20500     

Differences Between Individual ZSM‐5 Crystals in Forming Hollow Single Crystals and Mesopores During Base Leaching

After base treatment of ZSM‐5 crystals below 100 nm in size, TEM shows hollow single crystals with a 10 nm shell. SEM images confirm that the shell is well‐ preserved even after prolonged treatment. Determination of the Si/Al ratios with AAS and XPS in combination with argon sputtering reveals aluminum zoning of the parent zeolite, and the total pore volume increases in the first two hours of base treatment. In corresponding TEM images, the amount of hollow crystals are observed to increase during the first two hours of base treatment, and intact crystals are visible even after 10 h of leaching; these observations indicate different dissolution rates between individual crystals. TEM of large, commercially available ZSM‐5 crystals shows inhomogeneous distribution of mesopores among different crystals, which points to the existence of structural differences between individual crystals. Only tetrahedrally coordinated aluminum is detected with ²⁷Al MAS NMR after the base leaching of nano‐sized ZSM‐5.     

Synthesis of Zeolite ZSM-2 Using Zeolite NaX as Seeds

Introduction Oxygen and nitrogen have been produced tradition-ally by cryogenic distillation of air. Methods for the non-cryogenic separation based on selective adsorption have been developed and commercialized since the 1970s and have led to a cost-effective process for this important separation.1 Low-silica zeolites are important materials for producing oxygen by selective adsorption of nitrogen. In 19891990, a new generation of lith-ium-based adsorbents was developed.2,3 Highly lithium exc…     

Combination of the Metropolis Monte Carlo and Lattice Statics method for geometry optimization of H‐(Al)‐ZSM‐5

In this article, the combination of the Metropolis Monte Carlo and Lattice Statics (MMC‐LS) method is applied to perform the geometry optimization of crystalline aluminosilicate zeolite system in the presence of cationic species (H⁺), i.e., H‐(Al)‐ZSM‐5. It has been proved that the MMC‐LS method is very useful to allow H⁺ ions in (Al)‐ZSM‐5 extra‐framework to approach the global minimum energy sites. The crucial advantage of the combination MMC‐LS method is that, in stead of simulating over thousands random configurations via the only LS method, the only one configuration is needed for the MMC‐LS simulation to achieve the lowest energy configuration. Therefore, the calculation time can be substantially reduced via the performance of the MMC‐LS method with respect to the only LS method. The calculated results obtained from the MMC‐LS and the only LS methods have been comparatively represented in terms of the thermodynamic and structural properties. © 2010 Wiley Periodicals, Inc. J Comput Chem 2010