Synthesis,Structure, and Physico‐optical Properties of Manganate(II)‐Based Ionic Liquids

Several ionic liquids (ILs) based on complex manganate(II) anions with chloro, bromo, and bis(trifluoromethanesulfonyl)amido (Tf₂N) ligands have been synthesized. As counterions, n‐alkyl‐methylimidazolium (C_nmim) cations of different chain length (alkyl=ethyl (C₂), propyl (C₃), butyl (C₄), hexyl (C₆)) were chosen. Except for the 1‐hexyl‐3‐methylimidazolium ILs, all of the prepared compounds could be obtained in a crystalline state at room temperature. However, each of the compounds displayed a strong tendency to form a supercooled liquid. Generally, solidification via a glass transition took place below ?40 °C. Consequently, all of these compounds can be regarded as ionic liquids. Depending on the local coordination environment of Mn²⁺, green (tetrahedrally coordinated Mn²⁺) or red (octahedrally coordinated Mn²⁺) luminescence emission from the ⁴T(G) level is observed. 1 The local coordination of the luminescent Mn²⁺ centre has been unequivocally established by UV/Vis as well as Raman and IR vibrational spectroscopies. Emission decay times measured at room temperature in the solid state (crystalline or powder) were generally a few ms, although, depending on the ligand, values of up to 25 ms were obtained. For the bromo compounds, the luminescence decay times proved to be almost independent of the physical state and the temperature. However, for the chloro‐ and bis(trifluoromethanesulfonyl)amido ILs, the emission decay times were found to be dependent on the temperature even in the solid state, indicating that the measured values are strongly influenced by nuclear motion and the vibration of the atoms. In the liquid state, the luminescence of tetrahedrally coordinated Mn²⁺ could only be observed when the tetrachloromanganate ILs were diluted with the respective halide ILs. However, for [C₃mim][Mn(Tf₂N)₃], in which Mn²⁺ is in an octahedral coordination environment, a weak red emission from the pure compound was found even in the liquid state at elevated temperatures.     

Tunable Aryl Alkyl Ionic Liquids with Weakly Coordinating Tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)4] Anions

Weakly coordinating borate or aluminate anions have recently been shown to yield interesting properties of the resulting ionic liquids (ILs). The same is true for large phenyl‐substituted imidazolium cations, which can be tuned by the choice, position, or number of substituents on the aromatic ring. We were therefore interested to combine these aryl alkyl imidazolium cations with the weakly coordinating tetrakis((1,1,1,3,3,3‐hexafluoropropan‐2‐yl)oxy)borate [B(hfip)₄]^? anions to study the physical properties and viscosities of these ionic liquids. Despite the large size and high molecular weight of these readily available ILs, they are liquid at room temperature and show remarkably low glass transition points and relatively high decomposition temperatures.     

Effect of Dimethyl Carbonate on the Dynamic Properties and Ionicities of Ionic Liquids with [MIII(hfip)4]− (M=B,Al) Anions

Several ionic liquids (ILs) comprising [B(hfip)₄]^? [hfip=OCH(CF₃)₂] or [Al(hfip)₄]^? anions and imidazolium or ammonium cations were prepared and mixed with up to 270 mol % of dimethyl carbonate (DMC). The viscosities, conductivities, and self‐diffusion constants of these mixtures and, where possible, of the neat ILs were measured and compared with common [NTf₂]^? based ILs and their mixtures with DMC. A tremendous decrease of the viscosities and a likewise increase of the conductivities and diffusion constants can be achieved for all classes of ILs. However, the order of the conductivities is partially reversed in the diffusion data. This is probably due to the low dielectric constant of DMC and the, thus, favored ion pairing, as evidenced, for example, by the calculated ionicities. Altogether, our data show that the chemically robust, but high‐melting and more viscous [B(hfip)₄]^? ILs might be candidates for electrolytes when mixed with suitable molecular solvents.     

Size Matters! On the Way to Ionic Liquid Systems without Ion Pairing

Several, partly new, ionic liquids (ILs) containing imidazolium and ammonium cations as well as the medium‐sized [NTf₂]^? (0.230 nm³; Tf=CF₃SO₃^?) and the large [Al(hfip)₄]^? (0.581 nm³; hfip=OC(H)(CF₃)₂) anions were synthesized and characterized. Their temperature‐dependent viscosities and conductivities between 25 and 80 °C showed typical Vogel–Fulcher–Tammann (VFT) behavior. Ion‐specific self‐diffusion constants were measured at room temperature by pulsed‐gradient stimulated‐echo (PGSTE) NMR experiments. In general, self‐diffusion constants of both cations and anions in [Al(hfip)₄]^?‐based ILs were higher than in [NTf₂]^?‐based ILs. Ionicities were calculated from self‐diffusion constants and measured bulk conductivities, and showed that [Al(hfip)₄]^?‐based ILs yield higher ionicities than their [NTf₂]^? analogues, the former of which reach values of virtually 100 % in some cases.From these observations it was concluded that [Al(hfip)₄]^?‐based ILs come close to systems without any interactions, and this hypothesis is underlined with a Hirshfeld analysis. Additionally, a robust, modified Marcus theory quantitatively accounted for the differences between the two anions and yielded a minimum of the activation energy for ion movement at an anion diameter of slightly greater than 1 nm, which fits almost perfectly the size of [Al(hfip)₄]^?. Shallow Coulomb potential wells are responsible for the high mobility of ILs with such anions.     

Polyoxometalate Ionic Liquids as Self‐Repairing Acid‐Resistant Corrosion Protection

Corrosion is a global problem for any metallic structure or material. Herein we show how metals can easily be protected against acid corrosion using hydrophobic polyoxometalate‐based ionic liquids (POM‐ILs). Copper metal disks were coated with room‐temperature POM‐ILs composed of transition‐metal functionalized Keggin anions [SiW₁₁O₃₉TM(H₂O)]^n? (TM=Cu^II, Fe^III) and quaternary alkylammonium cations (C_nH_{2 n+1})₄N⁺ (n=7–8). The corrosion resistance against acetic acid vapors and simulated “acid rain” was significantly improved compared with commercial ionic liquids or solid polyoxometalate coatings. Mechanical damage to the POM‐IL coating is self‐repaired in less than one minute with full retention of the acid protection properties. The coating can easily be removed and recovered by rinsing with organic solvents.     

Rapid Preparation of Silsesquioxane‐Based Ionic Liquids

Three new hybrid ionic liquids (ILs) based on cage silsesquioxane (SQ) were rapidly prepared in high yields from octa(mercaptopropyl)silsesquioxane and 1‐allyl‐3‐methylimidazolium salts (Br^?, BF₄^?, PF₆^?) through the photochemical thiol–ene reaction. These SQ‐based ILs exhibited low glass transition temperatures and good thermal stability. The unique amphiphilic nature of these hybrid ILs cause them to self‐assemble into perfect vesicles with “yolk–shell” structures, in which cages formed the “yolk” due to their aggregation and outer anions formed the “shell”.     

Synthesis of a novel DPPA‐containing benzoxazine to flame‐retard epoxy resin with maintained thermal properties

The flame‐retarded epoxy resin with improved thermal properties based on environmentally friendly flame retardants is vital for industrial application. Hereby, a novel reactive‐type halogen‐free flame retardant, 10‐(3‐(4‐hydroxy phenyl)‐3,4‐dihydro‐2H‐benzo[e] [1,3] oxazin‐4‐yl)‐5H‐phenophosphazinine 10‐oxide (DHA‐B) was synthesized via a two‐step reaction route. Its structure was characterized using ¹H, ¹³C, and ³¹P NMR and HRMS spectra. For 4,4′‐diaminodipheny ethane (DDM) and diglycidyl ether of bisphenol A (DGEBA)‐cured systems, the epoxy resin with only 2 wt% loading of DHA‐B passed V‐0 rating of UL‐94 test. Significantly, its glass transition temperature (T_g) and initial decomposition temperature (T_5%) were as high as 169.6°C and 359.6°C, respectively, which were even higher than those of the corresponding original epoxy resin. Besides, DHA‐B decreased the combustion intensity during combustion. The analysis of residues after combustion suggested that DHA‐B played an important role in the condensed phase.     

Polarity Behaviour and Specific Interactions of Imidazolium‐Based Ionic Liquids in Ethylene Glycol

The molecular interactions of the ionic liquids (ILs) 1‐butyl‐3‐methylimidazolium tetrafluoroborate [C₄mim][BF₄], 3‐methyl‐1‐octylimidazolium tetrafluoroborate [C₈mim][BF₄] and 1‐butyl‐3‐methylimidazolium octylsulfate [C₄mim][C₈OSO₃] are investigated in ethylene glycol (EG) over the whole mole fraction range using fluorescence (steady‐state and time‐resolved), Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. The cybotactic region surrounding the pyrene fluorescent probe exhibits peculiar characteristics for different ILs in the EG‐rich region. The extent of solute–solvent interactions is assessed by determining the deviations of experimentally observed vibronic band intensity ratios of peak 1 to peak 3 of pyrene fluorescence (I₁/I₃) from a composite I₁/I₃ value obtained using a preferential solvation model. A distinct vibrational frequency shift for various stretching modes of EG (O? H) or ILs (C? H of ring protons, B? F and S?O of anions) indicates specific interactional preferences of EG toward the IL protons/anion. Splitting of the O? H vibration band of EG at 3000–3700 cm^?1 into three separate bands, and analysis of the changes in location and area of these bands as a function of concentration enable precise determination of the effect of ILs on hydrogen bridges of EG. NMR chemical shifts and their deviations from ideality show multiple hydrogen‐bonding interactions of varying strengths between unlike molecules in the mixtures. A comparison of spectroscopic results with thermodynamic properties shows that the mixing microscopic behaviour of the investigated systems is completely different from the macroscopic behaviour, which is primarily governed by the difference in shape, size and nature of the molecules.     

Swelling behavior of gelatin‐ionic liquid functional polymers

In this work, hydrogels obtained by mixing gelatin with ionic liquids (ILs) are prepared. Two different ILs, [emim][EtSO₄] and [bmim][N(CN)₂], are used to prepare hydrogels with different amounts of starting water and phosphate buffer content, which are used after a maturation period. The percentage of swelling in water and phosphate buffer, swelling and diffusion parameters are investigated in thin‐film polymers (1 × 1 cm²; 1‐mm thick) with different maturation times and at temperatures ranging from 4 to 37 °C. [emim][EtSO₄] polymers show a moderate (100% weight increase) but quick swelling that reaches 80% of the equilibrium within 30 min. They are liquefied and dissolved at temperatures above 25 °C. [bmim][N(CN)₂] polymers with short maturation times exhibit a similar behavior to the former, but more mature hydrogels register a very small swelling, abnormal kinetics and are more resistant to higher temperatures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys., 2013     

Aza‐nido‐dodecaboranes and ‐borates from Aza‐closo‐dodecaboranes by the Addition of Neutral or Anionic Bases: Mechanism

The addition of neutral (L = py, NEt₃, NHEt₂, NH₂tBu) and anionic Lewis bases (X^‐ = OH^‐, Br^‐, N₃^‐, Me^‐, NHBu ^‐, NHtBu^‐, [FeCp(CO)₂]^‐) to aza‐closo‐dodecaboranes RNB₁₁H₁₁ ( 1 ) or to derivatives thereof with boron bound non‐hydrogen ligands yields nido‐clusters RNB₁₁H₁₁L or [RNB₁₁H₁₁X]^‐ or derivatives thereof, respectively, the non‐planar pentagonal aperture N—B4—B9—B8—B5 of which hosts a B8—B9 hydrogen bridge. The base is either bound to B8 ( 3 )or B4 ( 5 )or B2( 7 ). The structures of these adducts are concluded from ¹H and ¹¹B NMR including 2D‐NMR spectra, and in the case of MeNB₁₁H₁₁(NHEt₂) (type 3 ) also by a crystal structure analysis. With two of the adducts MeNB₁₁H₁₁L (L = py, NHEt₂), isomers of the type 3 , 5 , and 7 , and with two of the adducts, MeNB₁₁H₁₁(NH₂tBu) and {MeNB₁₁H₁₁[FeCp(CO)₂]}^‐, isomers of the type 3 and 7 could be identified. The position of boron‐bound ligands during the addition of bases to 1 shows, that only vertices of the ortho‐belt of 1 are involved in the opening process. A mechanism is made plausible that starts by the attack of the base at B2 of 1 and opening of the N‐B2 bond, denoted as a [3c, 1c]‐collocation, to give 2 with an endo‐H atom, whose migration into an adjacent bridge position and opening of a second B—N bond, denoted as a [3c, 2c]‐translocation, gives 3 ; this isomer can be transformed into 7 by a sequence of [3c, 2c]‐translocations via the isomers 4 , 5 , and 6 . The chiral type 3 species MeNB₁₁H₁₁L with L = NHEt₂, NH₂tBu undergo a rapid enantiomerization, for whose mechanism the exchange of the bridging and the amine‐H atom has been made plausible.     

Elucidating Interactions between DMSO and Chelate‐Based Ionic Liquids

The C?D bond stretching vibrations of deuterated dimethyl sulfoxide ([D₆]DMSO) and the C₂?H bond stretching vibrations of 1,1,1,5,5,5‐hexafluoropentane‐2,4‐dione (hfac) ligand in anion are chosen as probes to elucidate the solvent–solute interaction between chelate‐based ionic liquids (ILs) and DMSO by vibrational spectroscopic studies. The indirect effect from the interaction of the adjacent S=O functional group of DMSO with the cation [C₁₀mim]⁺ and anion [Mn(hfac)₃]^? of the ILs leads to the blue‐shift of the C?D stretching vibrations of DMSO. The C₂?H bond stretching vibrations in hfac ligand is closely related to the ionic hydrogen bond strength between the cation and anion of chelate‐based ILs. EPR studies reveal that the crystal field of the central metal is kept when the chelate‐based ILs are in different microstructure environment in the solution.     

新的杯[4]芳烃衍生物通过缔合乙腈进行自插入的X-射线衍射和密度泛函理论研究

合成和表征了一个新的杯[4]芳烃衍生物，11,23-二羟亚胺甲基-25,27-二羟基-26,28-二丙氧基杯[4]芳烃 (B)及其与乙腈生成的组成为B·2CH₃CN的化合物。¹H NMR显示，在B·2CH₃CN中B采取锥型构象，X-射线衍射分析确证在溶液中所发现的构象。在晶格网络中存在着B·2CH₃CN以二聚体形式的自插入现象。在B3LYP/6-311G(d)水平上计算了该自插入二聚体中的非共价相互作用能，并对基集叠加误差进行了校正。在二聚体中的B·2CH₃CN，一个CH₃CN通过与羟亚胺基形成氢键使之稳定，结合能为–5.02 kJ·mol^-1，另一个CH₃CN则通过与另一个羟亚胺基形成氢键以及与另一B·2CH₃CN中B苯环空腔间的C–H···π相互作用使之稳定，结合能分别为–14.23 kJ·mol^-1和–3.77 kJ·mol^-1。自插入的驱动能为–7.54 kJ·mol^-1。     

Highly Efficient Carbon Monoxide Capture by Carbanion‐Functionalized Ionic Liquids through C‐Site Interactions

A novel method for the highly efficient and reversible capture of CO in carbanion‐functionalized ionic liquids (ILs) by a C‐site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol⁻¹) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf₂N] (2×10⁻³ mol mol⁻¹). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C‐site in the carbanion and CO resulted in the superior CO absorption capacities. Furthermore, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion‐functionalized ILs provides a new way of separating and converting CO.     

Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Synthesis and Characterization of New 3‐(3‐Hydroxyphenyl)‐4‐ alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione Compounds

A series of 3‐(3‐hydroxyphenyl)‐4‐alkyl‐3,4‐dihydrobenzo[e][1,3]oxazepine‐1,5‐dione compounds with general formula C_nH_2n+1CNO(CO)₂C₆H₄(C₆H₄OH) in which n are even parity numbers from 2 to 18. The structure determinations on these compounds were performed by FT‐IR spectroscopy which indicated that the terminal alkyl chain attached to the oxazepine ring was fully extended. Conformational analysis in DMSO at ambient temperature was carried out for the first time via high resolution ¹H NMR and ¹³C NMR spectroscopy.     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Synthesis and Characterization of 5‐Cyanotetrazolide‐Based Ionic Liquids

New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5‐cyanotetrazolide anion [C₂N₅]^? are reported. Depending on the nature of cation–anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm^?1 at 20 °C for the IL 1‐butyl‐1‐methylpyrrolidinium 5‐cyanotetrazolide [BMPyr][C₂N₅]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium‐ion batteries.     

First‐Row Transition‐Metal–Diborane and –Borylene Complexes

A combined experimental and quantum chemical study of Group 7 borane, trimetallic triply bridged borylene and boride complexes has been undertaken. Treatment of [{Cp*CoCl}₂] (Cp*=1,2,3,4,5‐pentamethylcyclopentadienyl) with LiBH₄ ? thf at ?78 °C, followed by room‐temperature reaction with three equivalents of [Mn₂(CO)₁₀] yielded a manganese hexahydridodiborate compound [{(OC)₄Mn}(η⁶‐B₂H₆){Mn(CO)₃}₂(μ‐H)] ( 1 ) and a triply bridged borylene complex [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂MnH(CO)₃] ( 2 ). In a similar fashion, [Re₂(CO)₁₀] generated [(μ₃‐BH)(Cp*Co)₂(μ‐CO)(μ‐H)₂ReH(CO)₃] ( 3 ) and [(μ₃‐BH)(Cp*Co)₂(μ‐CO)₂(μ‐H)Co(CO)₃] ( 4 ) in modest yields. In contrast, [Ru₃(CO)₁₂] under similar reaction conditions yielded a heterometallic semi‐interstitial boride cluster [(Cp*Co)(μ‐H)₃Ru₃(CO)₉B] ( 5 ). The solid‐state X‐ray structure of compound 1 shows a significantly shorter boron–boron bond length. The detailed spectroscopic data of 1 and the unusual structural and bonding features have been described. All the complexes have been characterized by using ¹H, ¹¹B, ¹³C NMR spectroscopy, mass spectrometry, and X‐ray diffraction analysis. The DFT computations were used to shed light on the bonding and electronic structures of these new compounds. The study reveals a dominant B?H?Mn, a weak B?B?Mn interaction, and an enhanced B?B bonding in 1 .     

Synthesis and Improved Properties of Hypergolic Boronium‐Based Ionic Liquids

A series of asymmetric monoimidazolium dihydroboronium‐based ionic liquids (ILs) were synthesized from amine‐boranes. All the resulting ILs were fully characterized by ¹H and ¹³C NMR, IR spectroscopy, elemental analysis or high resolution mass spectrum. Compared with the symmetric bisimidazolium dihydroboronium‐based ILs, these new ILs exhibited improved properties with shorter ignition delay times (IDs), higher densities, and lower phase transition temperature showing the promising application potential as green propellants.     

Electrochemical Quantification of Hygroscopicity of Ionic Liquids with Solution‐Dissolved Potassium Ferricyanide as the Redox Probe

Quantification of hygroscopicity of ionic liquids (ILs) is of great importance in both fundamental studies and practical applications of ILs. This study demonstrates an electrochemical method for effectively quantifying the hygroscopicity of ILs through electrochemically monitoring water contents absorbed into ILs. The measurements of water content absorbed into the ILs are performed with square wave voltammetry (SWV) based on the water‐induced enhancement of diffusion of solution‐dissolved potassium ferricyanide (K₃Fe(CN)₆) redox probe. For demonstration, two kinds of ILs with different hygroscopicity (i.e., hydrophilic Bmim⁺Gly^? and hydrophobic Bmim⁺PF₆^?) are employed in this study. The dissolution of K₃Fe(CN)₆ redox probe into ILs is found to have little effect on the hygroscopicity of ILs. The hygroscopicity of ILs is thus able to be quantified by monitoring water content absorbed into ILs as a function of time when ILs are stored at room temperature and standard atmospheric pressure under 55 % relative humidity (RH). Under the conditions employed in this study, the hygroscopicity of Bmim⁺Gly^? and Bmim⁺PF₆^? is determined to be 1.33 M per hour and 0.05 M per hour, respectively, which are almost consistent with those measured with Karl Fischer titration under the same conditions. The electrochemical method demonstrated in this study is experimentally simply and environmentally benign and may be potentially extended for general quantification of hygroscopicity of ILs.