Hyperpolarized NMR Spectroscopy: d‐DNP,PHIP, and SABRE Techniques

The intensity of NMR signals can be enhanced by several orders of magnitude by using various techniques for the hyperpolarization of different molecules. Such approaches can overcome the main sensitivity challenges facing modern NMR/magnetic resonance imaging (MRI) techniques, whilst hyperpolarized fluids can also be used in a variety of applications in material science and biomedicine. This Focus Review considers the fundamentals of the preparation of hyperpolarized liquids and gases by using dissolution dynamic nuclear polarization (d‐DNP) and parahydrogen‐based techniques, such as signal amplification by reversible exchange (SABRE) and parahydrogen‐induced polarization (PHIP), in both heterogeneous and homogeneous processes. The various new aspects in the formation and utilization of hyperpolarized fluids, along with the possibility of observing NMR signal enhancement, are described.     

Heterogeneous Microtesla SABRE Enhancement of 15N NMR Signals

The hyperpolarization of heteronuclei via signal amplification by reversible exchange (SABRE) was investigated under conditions of heterogeneous catalysis and microtesla magnetic fields. Immobilization of [IrCl(COD)(IMes)], [IMes=1,3‐bis(2,4,6‐trimethylphenyl), imidazole‐2‐ylidene; COD=cyclooctadiene] catalyst onto silica particles modified with amine linkers engenders an effective heterogeneous SABRE (HET‐SABRE) catalyst that was used to demonstrate a circa 100‐fold enhancement of ¹⁵N NMR signals in ¹⁵N‐pyridine at 9.4 T following parahydrogen bubbling within a magnetic shield. No ¹⁵N NMR enhancement was observed from the supernatant liquid following catalyst separation, which along with XPS characterization supports the fact that the effects result from SABRE under heterogeneous catalytic conditions. The technique can be developed further for producing catalyst‐free agents via SABRE with hyperpolarized heteronuclear spins, and thus is promising for biomedical NMR and MRI applications.     

“Direct” 13C Hyperpolarization of 13C‐Acetate by MicroTesla NMR Signal Amplification by Reversible Exchange (SABRE)

Herein, we demonstrate “direct” ¹³C hyperpolarization of ¹³C‐acetate via signal amplification by reversible exchange (SABRE). The standard SABRE homogeneous catalyst [Ir‐IMes; [IrCl(COD)(IMes)], (IMes=1,3‐bis(2,4,6‐trimethylphenyl), imidazole‐2‐ylidene; COD=cyclooctadiene)] was first activated in the presence of an auxiliary substrate (pyridine) in alcohol. Following addition of sodium 1‐¹³C‐acetate, parahydrogen bubbling within a microtesla magnetic field (i.e. under conditions of SABRE in shield enables alignment transfer to heteronuclei, SABRE‐SHEATH) resulted in positive enhancements of up to ≈100‐fold in the ¹³C NMR signal compared to thermal equilibrium at 9.4 T. The present results are consistent with a mechanism of “direct” transfer of spin order from parahydrogen to ¹³C spins of acetate weakly bound to the catalyst, under conditions of fast exchange with respect to the ¹³C acetate resonance, but we find that relaxation dynamics at microtesla fields alter the optimal matching from the traditional SABRE‐SHEATH picture. Further development of this approach could lead to new ways to rapidly, cheaply, and simply hyperpolarize a broad range of substrates (e.g. metabolites with carboxyl groups) for various applications, including biomedical NMR and MRI of cellular and in vivo metabolism.     

Signal Amplification by Reversible Exchange (SABRE): From Discovery to Diagnosis

Signal amplification by reversible exchange (SABRE) turns typically weak magnetic resonance responses into strong signals making previously impractical measurements possible. This technique has gained significant popularity because of its speed and simplicity. This Minireview tracks the development of SABRE from the initial hyperpolarization of pyridine in 2009 to the point in which 50 % ¹H polarization levels have been achieved in a di‐deuterio‐nicotinate, a key step in the pathway to potential clinical use. Simple routes to highly efficient ¹⁵N hyperpolarization and the creation of hyperpolarized long‐lived magnetic states are illustrated. To conclude, we describe how the recently reported SABRE‐RELAY approach offers a route for parahydrogen to hyperpolarize a much wider array of molecular scaffolds, such as amides, alcohols, carboxylic acids, and phosphates, than was previously thought possible. We predict that collectively these developments ensure that SABRE will significantly impact on both chemical analysis and the diagnosis of disease in the future.     

Level Anti‐Crossings are a Key Factor for Understanding para‐Hydrogen‐Induced Hyperpolarization in SABRE Experiments

Various hyperpolarization methods are able to enhance the sensitivity of nuclear magnetic resonance (NMR) spectroscopy and magnetic resonance imaging (MRI) by several orders of magnitude. Among these methods are para‐hydrogen‐induced polarization (PHIP) and signal amplification by reversible exchange (SABRE), which exploit the strong nuclear alignment of para‐hydrogen. Several SABRE experiments have been reported but, so far, it has not been possible to account for the experimentally observed sign and magnetic‐field dependence of substrate polarization. Herein, we present an analysis based on level anti‐crossings (LACs), which provides a complete understanding of the SABRE effect. The field‐dependence of both net and anti‐phase polarization is measured for several ligands, which can be reproduced by the theory. The similar SABRE field‐dependence for different ligands is also explained. In general, the LAC concept allows complex spin dynamics to be unraveled, and is crucial for optimizing the performance of novel hyperpolarization methods in NMR and MRI techniques.     

A Hyperpolarizable 1H Magnetic Resonance Probe for Signal Detection 15 Minutes after Spin Polarization Storage

Nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) are two extremely important techniques with applications ranging from molecular structure determination to human imaging. However, in many cases the applicability of NMR and MRI are limited by inherently poor sensitivity and insufficient nuclear spin lifetime. Here we demonstrate a cost‐efficient and fast technique that tackles both issues simultaneously. We use the signal amplification by reversible exchange (SABRE) technique to hyperpolarize the target ¹H nuclei and store this polarization in long‐lived singlet (LLS) form after suitable radiofrequency (rf) pulses. Compared to the normal scenario, we achieve three orders of signal enhancement and one order of lifetime extension, leading to ¹H NMR signal detection 15 minutes after the creation of the detected states. The creation of such hyperpolarized long‐lived polarization reflects an important step forward in the pipeline to see such agents used as clinical probes of disease.     

“Direct” 13C Hyperpolarization of 13C-Acetate by MicroTesla NMR Signal Amplification by Reversible Exchange (SABRE)

Herein, we demonstrate “direct” ¹³C hyperpolarization of ¹³C-acetate via signal amplification by reversible exchange (SABRE). The standard SABRE homogeneous catalyst [Ir-IMes; [IrCl(COD)(IMes)], (IMes=1,3-bis(2,4,6-trimethylphenyl), imidazole-2-ylidene; COD=cyclooctadiene)] was first activated in the presence of an auxiliary substrate (pyridine) in alcohol. Following addition of sodium 1-¹³C-acetate, parahydrogen bubbling within a microtesla magnetic field (i.e. under conditions of SABRE in shield enables alignment transfer to heteronuclei, SABRE-SHEATH) resulted in positive enhancements of up to ≈100-fold in the ¹³C NMR signal compared to thermal equilibrium at 9.4 T. The present results are consistent with a mechanism of “direct” transfer of spin order from parahydrogen to ¹³C spins of acetate weakly bound to the catalyst, under conditions of fast exchange with respect to the ¹³C acetate resonance, but we find that relaxation dynamics at microtesla fields alter the optimal matching from the traditional SABRE-SHEATH picture. Further development of this approach could lead to new ways to rapidly, cheaply, and simply hyperpolarize a broad range of substrates (e.g. metabolites with carboxyl groups) for various applications, including biomedical NMR and MRI of cellular and in vivo metabolism.     

Parahydrogen‐Induced Radio Amplification by Stimulated Emission of Radiation

Radio amplification by stimulated emission of radiation (RASER) was recently discovered in a low‐field NMR spectrometer incorporating a highly specialized radio‐frequency resonator, where a high degree of proton‐spin polarization was achieved by reversible parahydrogen exchange. RASER activity, which results from the coherent coupling between the nuclear spins and the inductive detector, can overcome the limits of frequency resolution in NMR. Here we show that this phenomenon is not limited to low magnetic fields or the use of resonators with high‐quality factors. We use a commercial bench‐top 1.4 T NMR spectrometer in conjunction with pairwise parahydrogen addition producing proton‐hyperpolarized molecules in the Earth's magnetic field (ALTADENA condition) or in a high magnetic field (PASADENA condition) to induce RASER without any radio‐frequency excitation pulses. The results demonstrate that RASER activity can be observed on virtually any NMR spectrometer and measures most of the important NMR parameters with high precision.     

Parahydrogen‐Induced Hyperpolarization of Gases

Imaging of gases is a major challenge for any modality including MRI. NMR and MRI signals are directly proportional to the nuclear spin density and the degree of alignment of nuclear spins with applied static magnetic field, which is called nuclear spin polarization. The level of nuclear spin polarization is typically very low, i.e., one hundred thousandth of the potential maximum at 1.5 T and a physiologically relevant temperature. As a result, MRI typically focusses on imaging highly concentrated tissue water. Hyperpolarization methods transiently increase nuclear spin polarizations up to unity, yielding corresponding gains in MRI signal level of several orders of magnitude that enable the 3D imaging of dilute biomolecules including gases. Parahydrogen‐induced polarization is a fast, highly scalable, and low‐cost hyperpolarization technique. The focus of this Minireview is to highlight selected advances in the field of parahydrogen‐induced polarization for the production of hyperpolarized compounds, which can be potentially employed as inhalable contrast agents.     

Synthesis and 15N NMR Signal Amplification by Reversible Exchange of [15N]Dalfampridine at Microtesla Magnetic Fields

Signal Amplification by Reversible Exchange (SABRE) technique enables nuclear spin hyperpolarization of wide range of compounds using parahydrogen. Here we present the synthetic approach to prepare ¹⁵N-labeled [¹⁵N]dalfampridine (4-amino[¹⁵N]pyridine) utilized as a drug to reduce the symptoms of multiple sclerosis. The synthesized compound was hyperpolarized using SABRE at microtesla magnetic fields (SABRE-SHEATH technique) with up to 2.0 % ¹⁵N polarization. The 7-hour-long activation of SABRE pre-catalyst [Ir(IMes)(COD)Cl] in the presence of [¹⁵N]dalfampridine can be remedied by the use of pyridine co-ligand for catalyst activation while retaining the ¹⁵N polarization levels of [¹⁵N]dalfampridine. The effects of experimental conditions such as polarization transfer magnetic field, temperature, concentration, parahydrogen flow rate and pressure on ¹⁵N polarization levels of free and equatorial catalyst-bound [¹⁵N]dalfampridine were investigated. Moreover, we studied ¹⁵N polarization build-up and decay at magnetic field of less than 0.04 μT as well as ¹⁵N polarization decay at the Earth's magnetic field and at 1.4 T.     

超极化核磁共振方法的原理和应用

核磁共振(NMR)技术凭借其高空间分辨率,宽时间响应尺度和非侵入检测等特点,在化学分析和医疗诊断中发挥着重要的作用。但是原子核的低极化使现阶段NMR技术的灵敏度较低。超极化技术是一类可以有效提高NMR灵敏度的方法。其通过物理或化学过程把原子核自旋态推向一个偏离热力学平衡的状态,使NMR信号强度得到几个数量级的提升,极大地改善了灵敏度。多种超极化技术已经在各个领域崭露头角。本文用较为形象的描述对几种常见的超极化技术包括:动态核极化、光泵、光核极化、化学诱导动态核极化、仲氢诱导极化。从其精巧的原理和广泛的应用进行介绍,有助于人们对超极化技术的认知。     

Single‐Scan Multidimensional NMR Analysis of Mixtures at Sub‐Millimolar Concentrations by using SABRE Hyperpolarization

Signal amplification by reversible exchange (SABRE) is a promising method to increase the sensitivity of nuclear magnetic resonance (NMR) experiments. However, SABRE‐enhanced ¹H NMR signals are short lived, and SABRE is often used to record 1D NMR spectra only. When the sample of interest is a complex mixture, this results in severe overlaps for ¹H spectra. In addition, the use of a co‐substrate, whose signals may obscure the ¹H spectra, is currently the most efficient way to lower the detection limit of SABRE experiments. Here, we describe an approach to obtain clean, SABRE‐hyperpolarized 2D ¹H NMR spectra of mixtures of small molecules at sub‐millimolar concentrations in a single scan. The method relies on the use of para‐hydrogen together with a deuterated co‐substrate for hyperpolarization and ultrafast 2D NMR for acquisition. It is applicable to all substrates that can be polarized with SABRE.     

Heterogeneous Solution NMR Signal Amplification by Reversible Exchange

A novel variant of an iridium‐based organometallic catalyst was synthesized and used to enhance the NMR signals of pyridine in a heterogeneous phase by immobilization on polymer microbead solid supports. Upon administration of parahydrogen (pH₂) gas to a methanol mixture containing the HET‐SABRE catalyst particles and the pyridine, up to fivefold enhancements were observed in the ¹H NMR spectra after sample transfer to high field (9.4 T). Importantly, enhancements were not due to any residual catalyst molecules in solution, thus supporting the true heterogeneity of the SABRE process. Further significant improvements may be expected by systematic optimization of experimental parameters. Moreover, the heterogeneous catalyst is easy to separate and recycle, thus opening a door to future potential applications varying from spectroscopic studies of catalysis, to imaging metabolites in the body without concern of contamination from expensive and potentially toxic metal catalysts or accompanying organic molecules.     

High‐Resolution 3D Proton MRI of Hyperpolarized Gas Enabled by Parahydrogen and Rh/TiO2 Heterogeneous Catalyst

Several supported metal catalysts were synthesized, characterized, and tested in heterogeneous hydrogenation of propene with parahydrogen to maximize nuclear spin hyperpolarization of propane gas using parahydrogen induced polarization (PHIP). The Rh/TiO₂ catalyst with a metal particle size of 1.6 nm was found to be the most active and effective in the pairwise hydrogen addition and robust, demonstrating reproducible results with multiple hydrogenation experiments and stability for ≥1.5 years. 3D ¹H magnetic resonance imaging (MRI) of 1 % hyperpolarized flowing gas with microscale spatial resolution (625×625×625 μm³) and large imaging matrix (128×128×32) was demonstrated by using a preclinical 4.7 T scanner and 17.4 s imaging scan time.     

Parahydrogen-Induced Polarization of Diethyl Ether Anesthetic

The growing interest in magnetic resonance imaging (MRI) for assessing regional lung function relies on the use of nuclear spin hyperpolarized gas as a contrast agent. The long gas-phase lifetimes of hyperpolarized ¹²⁹Xe make this inhalable contrast agent acceptable for clinical research today despite limitations such as high cost, low throughput of production and challenges of ¹²⁹Xe imaging on clinical MRI scanners, which are normally equipped with proton detection only. We report on low-cost and high-throughput preparation of proton-hyperpolarized diethyl ether, which can be potentially employed for pulmonary imaging with a nontoxic, simple, and sensitive overall strategy using proton detection commonly available on all clinical MRI scanners. Diethyl ether is hyperpolarized by pairwise parahydrogen addition to vinyl ethyl ether and characterized by ¹H NMR spectroscopy. Proton polarization levels exceeding 8 % are achieved at near complete chemical conversion within seconds, causing the activation of radio amplification by stimulated emission radiation (RASER) throughout detection. Although gas-phase T₁ relaxation of hyperpolarized diethyl ether (at partial pressure of 0.5 bar) is very efficient, with T₁ of ca. 1.2 second, we demonstrate that, at low magnetic fields, the use of long-lived singlet states created via pairwise parahydrogen addition extends the relaxation decay by approximately threefold, paving the way to bioimaging applications and beyond.     

Synthetic Approaches for 15N-Labeled Hyperpolarized Heterocyclic Molecular Imaging Agents for 15N NMR Signal Amplification by Reversible Exchange in Microtesla Magnetic Fields

NMR hyperpolarization techniques enhance nuclear spin polarization by several orders of magnitude resulting in corresponding sensitivity gains. This enormous sensitivity gain enables new applications ranging from studies of small molecules by using high-resolution NMR spectroscopy to real-time metabolic imaging in vivo. Several hyperpolarization techniques exist for hyperpolarization of a large repertoire of nuclear spins, although the ¹³C and ¹⁵N sites of biocompatible agents are the key targets due to their widespread use in biochemical pathways. Moreover, their long T₁ allows hyperpolarized states to be retained for up to tens of minutes. Signal amplification by reversible exchange (SABRE) is a low-cost and ultrafast hyperpolarization technique that has been shown to be versatile for the hyperpolarization of ¹⁵N nuclei. Although large sensitivity gains are enabled by hyperpolarization, ¹⁵N natural abundance is only ∼0.4 %, so isotopic labeling of the molecules to be hyperpolarized is required in order to take full advantage of the hyperpolarized state. Herein, we describe selected advances in the preparation of ¹⁵N-labeled compounds with the primary emphasis on using these compounds for SABRE polarization in microtesla magnetic fields through spontaneous polarization transfer from parahydrogen. Also, these principles can certainly be applied for hyperpolarization of these emerging contrast agents using dynamic nuclear polarization and other techniques.     

NMR Signal Enhancement by Effective SABRE Labeling of Oligopeptides

Signal amplification by reversible exchange (SABRE) can enhance nuclear magnetic resonance signals by several orders of magnitude. However, until now this was limited to a small number of model target molecules. Here, a new convenient method for SABRE activation applicable to a variety of synthetic model oligopeptides is demonstrated. For the first time, a highly SABRE‐active pyridine‐based biocompatible molecular framework is incorporated into synthetic oligopeptides. The SABRE activity is preserved, demonstrating the importance of such earmarking. Finally, a crucial exchange process responsible for SABRE activity is identified and discussed.     

Simulating Non-linear Chemical and Physical (CAP) Dynamics of Signal Amplification By Reversible Exchange (SABRE)

The hyperpolarization of nuclear spins by using parahydrogen (pH₂) is a fascinating technique that allows spin polarization and thus the magnetic resonance signal to be increased by several orders of magnitude. Entirely new applications have become available. Signal amplification by reversible exchange (SABRE) is a relatively new method that is based on the reversible exchange of a substrate, catalyst and parahydrogen. SABRE is particularly interesting for in vivo medical and industrial applications, such as fast and low-cost trace analysis or continuous signal enhancement. Ever since its discovery, many attempts have been made to model and understand SABRE, with various degrees of simplifications. In this work, we reduced the simplifications further, taking into account non-linear chemical and physical (CAP) dynamics of several multi-spin systems. A master equation was derived and realized using the MOIN open-source software. The effects of different parameters (exchange rates, concentrations, spin–spin couplings) on relaxation and the polarization level have been evaluated and the results provide interesting insights into the mechanism of SABRE.     

Transfer of parahydrogen-induced hyperpolarization to 19F

Homogeneous hydrogenations of unsaturated substrates with parahydrogen yield strong NMR signal enhancements of the transferred 1H nuclei if the symmetry of H2 is broken in the resulting hydrogenated products. This chemically induced hyperpolarization known as Parahydrogen-induced polarization (PHIP) is also transferred to other protons and heteronuclei (2H, 13C, 29Si, 31P) when the hydrogenation is initiated at low magnetic fields. Hydrogenating various fluorinated styrenes and phenylacetylenes, we show that PHIP-derived hyperpolarization is transferred to 19F not only in the Earth's magnetic field (ALTADENA condition) but also in a strong magnetic field, e.g., when carrying out the reaction in the NMR spectrometer (PASADENA condition). Upon conducting a systematic analysis of the observed PHIP transfer to 1H, 13C, and 19F in the hydrogenation products to elucidate the mechanisms that govern this parahydrogen-aided resonance transfer (PART), we conclude that high- and low-field PHIP transfer mechanisms differ in detail depending on either through-bond or through-space interactions. Substrates with high hydrogenation rates and long spin-lattice relaxation times (T1) yield the highest degree of heteronuclear hyperpolarization. Possible medical applications for hyperpolarized 19F-containing molecules as "active" contrast agents for magnetic resonance imaging (MRI) are outlined.     

Hyperpolarization of cis-15N2-Azobenzene by Parahydrogen at Ultralow Magnetic Fields**

The development of nuclear spins hyperpolarization, and the search for molecules that can be efficiently hyperpolarized is an active area in nuclear magnetic resonance. In this work we present a detailed study of SABRE SHEATH (signal amplification by reversible exchange in shield enabled alignment transfer to heteronuclei) experiments on ¹⁵N₂-azobenzene. In SABRE SHEATH experiments the nuclear spins of the target are hyperpolarized through transfer of spin polarization from parahydrogen at ultralow fields during a reversible chemical process. Azobenzene exists in two isomers, trans and cis. We show that all nuclear spins in cis-azobenzene can be efficiently hyperpolarized by SABRE at suitable magnetic fields. Enhancement factors (relative to 9.4 T) reach up to 3000 for ¹⁵N spins and up to 30 for the ¹H spins. We compare two approaches to observe either hyperpolarized magnetization of ¹⁵N/¹H spins, or hyperpolarized singlet order of the ¹⁵N spin pair. The results presented here will be useful for further experiments in which hyperpolarized cis-¹⁵N₂-azobenzene is switched by light to trans-¹⁵N₂-azobenzene for storing the produced hyperpolarization in the long-lived spin state of the ¹⁵N pair of trans-¹⁵N₂-azobenzene.