Porous Cationic Covalent Triazine‐Based Frameworks as Platforms for Efficient CO2 and Iodine Capture

Porous cationic covalent triazine‐based frameworks (CTFs) with imidazolium salts as tectons were prepared via ionothermal synthesis. The high‐PF₆^?‐content CTF shows the CO₂ adsorption of 44.7 cm³ g^?1 and I₂ capture capacity of 312 wt %. The influence of counterion species and contents on the porosities, CO₂ adsorptions, and I₂ capture capacities of the CTFs has been investigated.     

Gas‐Separation Membranes Loaded with Porous Aromatic Frameworks that Improve with Age

Porosity loss, also known as physical aging, in glassy polymers hampers their long term use in gas separations. Unprecedented interactions of porous aromatic frameworks (PAFs) with these polymers offer the potential to control and exploit physical aging for drastically enhanced separation efficiency. PAF‐1 is used in the archetypal polymer of intrinsic microporosity (PIM), PIM‐1, to achieve three significant outcomes. 1) hydrogen permeability is drastically enhanced by 375 % to 5500 Barrer. 2) Physical aging is controlled causing the selectivity for H₂ over N₂ to increase from 4.5 to 13 over 400 days of aging. 3) The improvement with age of the membrane is exploited to recover up to 98 % of H₂ from gas mixtures with N₂. This process is critical for the use of ammonia as a H₂ storage medium. The tethering of polymer side chains within PAF‐1 pores is responsible for maintaining H₂ transport pathways, whilst the larger N₂ pathways gradually collapse.     

Porous MII/Pyrimidine‐4,6‐Dicarboxylato Neutral Frameworks: Synthetic Influence on the Adsorption Capacity and Evaluation of CO2‐Adsorbent Interactions

The understanding of the factors that affect the real pore‐network structure for a given bulk material due to different synthetic procedures is essential to develop the material with the best adsorption properties. In this work, we have deeply studied the influence of the crystallinity degree over the adsorption capacity on three new isostructural MOFs with the formula {[CdM(μ₄‐pmdc)₂(H₂O)₂] ? solv}_n (in which, pmdc=pyrimidine‐4,6‐dicarboxylate; solv=corresponding solvent; M^II=Cd ( 1 ), Mn ( 2 ), Zn ( 3 )). Compared with other methods, the solvent‐free synthesis stands as the most effective route because, apart from enabling the preparation of the heterometallic compounds 2 and 3 , it also renders the adsorbents with the highest performance, which is indeed close to the expected one derived from Grand Canonical Monte Carlo (GCMC) calculations. The structural analysis of the as‐synthesised and evacuated frameworks reveals the existence of a metal atom exposed to the pore. The accessibility of this site is limited due to its atomic environment, which is why it is considered as a pseudo‐open‐metal site. The chemical and physical characterisation confirms that this site can be modified as the metal atom is replaced in compounds 2 and 3 . To assess the effect of the metal replacement on the adsorption behaviour, an exhaustive study of CO₂ experimental isotherms has been performed. The affinity of the pseudo‐open metal sites towards CO₂ and the distribution of the preferred adsorption sites are discussed on the basis of DFT and GCMC calculations.     

Cationic Heterocycles as Ligands: Synthesis and Reactivity with Anionic Nucleophiles of Cationic Triruthenium Clusters Containing C‐Metalated N‐Methylquinoxalinium or N‐Methylpyrazinium Ligands

The cationic cluster complexes [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L¹Me)]⁺ ( 3 ⁺; HL¹=quinoxaline) and [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L²Me)]⁺ ( 5 ⁺; HL²=pyrazine) have been prepared as triflate salts by treatment of their neutral precursors [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐Lⁿ)] with methyl triflate. The cationic character of their heterocyclic ligands is responsible for their enhanced tendency to react with anionic nucleophiles relative to that of hydrido triruthenium carbonyl clusters that have neutral N‐heterocyclic ligands. These clusters react instantaneously with methyl lithium and potassium tris‐sec‐butylborohydride (K‐selectride) to give neutral products that contain novel nonaromatic N‐heterocyclic ligands. The following are the products that have been isolated: [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹Me₂)] ( 6 ; from 3 ⁺ and methyl lithium), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹HMe)] ( 7 ; from 3 ⁺ and K‐selectride), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²Me₂)] ( 8 ; from 5 ⁺ and methyl lithium), and [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²HMe)] ( 11 ; from 5 ⁺ and K‐selectride). Whereas the reactions of 3 ⁺ lead to products that arise from the attack of the corresponding nucleophile at the C atom of the only CH group adjacent to the N‐methyl group, the reactions of 5 ⁺ give mixtures of two products that arise from the attack of the nucleophile at one of the C atoms located on either side of the N‐methyl group. The LUMOs and the atomic charges of 3 ⁺ and 5 ⁺ confirm that the reactions of these clusters with anionic nucleophiles are orbital‐controlled rather than charge‐controlled processes. The N‐heterocyclic ligands of all of these neutral products are attached to the metal atoms in nonconventional face‐capping modes. Those of compounds 6 – 8 have the atoms of a ligand C?N fragment σ‐bonded to two Ru atoms and π‐bonded to the other Ru atom, whereas the ligand of compound 11 has a C? N fragment attached to a Ru atom through the N atom and to the remaining two Ru atoms through the C atom. A variable‐temperature ¹H NMR spectroscopic study showed that the ligand of compound 7 is involved in a fluxional process at temperatures above ?93 °C, the mechanism of which has been satisfactorily modeled with the help of DFT calculations and involves the interconversion of the two enantiomers of this cluster through a conformational change of the ligand CH₂ group, which moves from one side of the plane of the heterocyclic ligand to the other, and a 180° rotation of the entire organic ligand over a face of the metal triangle.     

定向合成高效捕获CO2的新型多孔芳香材料

通过简单的离子热法,以四（4-氰基联苯基）硅烷作为四面体基块,将其与无水氯化锌在充满氩气气氛的手套箱中充分研磨后密封,分别以400和550 ℃的反应温度合成了新型多孔芳香骨架材料（PAF-51）,得到PAF-51-1（400 ℃条件下）与PAF-51-2（550 ℃条件下）的比表面积分别为720和557 m²·g^-1 （BET）.与CH₄和N₂对比,该材料对CO₂具有极好的选择性吸附能力. 273 K条件下,CO₂/N₂分离指数最高可达52.2,CO₂/CH₄分离指数也达到10.3,这一性质极有可能使得PAF-51成为捕获CO₂理想材料,并对再生能源具有潜在的应用.     

Transition‐Metal‐Free Tunable Chemoselective N Functionalization of Indoles with Ynamides

Two unprecedented N functionalizations of indoles with ynamides are described. By varying the electron‐withdrawing group on the ynamide nitrogen atom, either Z‐indolo‐etheneamides or indolo‐amidines can be selectively obtained under the same metal‐free reaction conditions. The scope and synthetic potential of these reactions, as well as some mechanistic insights provided by DFT calculations, are reported.     

From Metal–Organic Frameworks to Single‐Atom Fe Implanted N‐doped Porous Carbons: Efficient Oxygen Reduction in Both Alkaline and Acidic Media

It remains highly desired but a great challenge to achieve atomically dispersed metals in high loadings for efficient catalysis. Now porphyrinic metal–organic frameworks (MOFs) have been synthesized based on a novel mixed‐ligand strategy to afford high‐content (1.76 wt %) single‐atom (SA) iron‐implanted N‐doped porous carbon (Fe_SA‐N‐C) via pyrolysis. Thanks to the single‐atom Fe sites, hierarchical pores, oriented mesochannels and high conductivity, the optimized Fe_SA‐N‐C exhibits excellent oxygen reduction activity and stability, surpassing almost all non‐noble‐metal catalysts and state‐of‐the‐art Pt/C, in both alkaline and more challenging acidic media. More far‐reaching, this MOF‐based mixed‐ligand strategy opens a novel avenue to the precise fabrication of efficient single‐atom catalysts.     

New Reactions of N‐tert‐Butylimines; Formation of N‐Heterocycles by Methyl Radical Elimination on Flash Vacuum Thermolysis of N‐Benzylidene‐ and N‐(2‐Pyridylmethylidene)‐tert‐butylamines

Thermal reactions of N‐benzylidene‐ and N‐(2‐pyridylmethylidene)‐tert‐butylamines ( 5 and 13 ) under FVT conditions have been investigated. Unexpectedly, at 800 °C, compound 5 yields 1,2‐dimethylindole and 3‐methylisoquinoline. In the reaction of 13 at 800 °C, 3‐methylimidazo[1,5‐a]pyridine was obtained as the major product. Mechanisms of these reactions have been proposed on the basis of DFT calculations. Furthermore, UV‐photoelectron spectroscopy combined with FVT has been applied for direct monitoring and characterization of the thermolysis products in situ.     

Porous Carbon Nitride Frameworks Derived from Covalent Triazine Framework Anchored Ag Nanoparticles for Catalytic CO2 Conversion

Porous carbon nitride frameworks (PCNFs) with uniform and rich nitrogen dopants and abundant porosity were successfully fabricated through the direct carbonization of the covalent triazine frameworks (CTFs) at different pyrolysis temperatures and used as supports to anchor and stabilize Ag nanoparticles (NPs) for catalytic CO₂ conversion. Importantly, the pyrolysis temperature plays a crucial role in the properties of porous carbon nitride frameworks. The material carbonized at 700 °C showed the highest surface area and micro- and mesoporous structure with a certain interlayer distance. Taking advantage of their unique surface characteristics, PCNF-supported Ag NP catalysts (Ag/PCNF-T, T=pyrolysis temperature) were prepared by a simple chemical method. A series of characterizations revealed that Ag NPs are embedded in the porous carbon nitride frameworks and confined to a relatively small size with high dispersion owing to the assistance of the abundant surface groups and porous structures. The as-obtained Ag/PCNF-T catalysts, especially Ag/PCNF-700, showed excellent catalytic activity, selectivity, and stability for the carboxylation of CO₂ with terminal alkynes under mild conditions. This can be due to the existence of abundant nitrogen atoms and diverse porosity, which resulted in highly efficient catalytic activity and stability.     

Electride-Sponsored Radical-Controlled CO2 Reduction to Organic Acids: A Computational Design

Converting CO₂ into high-value chemicals has been regarded as an important solution for a sustainable low-carbon economy. In this work, we have theoretically designed an innovative strategy for the absorption and activation of CO₂ by the electride N3Li, that is, 1,3,5(2,6)-tripyridinacyclohexaphane (N3) intercalated by lithium. DFT computations showed that the interaction of CO₂ with N3Li leads to the catalytic complex N3Li(η²-O₂C), which can initiate the radical-controlled reduction of another CO₂ to form organic acids through radical reactions in the gas phase. The CO₂ reduction consists of four steps: (1) The formation of N3Li(η²-O₂C) through the combination of N3Li and CO₂, (2) hydrogen abstraction from RH (R=H, CH₃, and C₂H₅) by N3Li(η²-O₂C) to form the radical R^. and N3Li(η²-O₂C)H, (3) the combination of CO₂ and the radical R^. to form RCOO^., and (4) intermolecular hydrogen transfer from the intermediate N3Li(η²-O₂C)H to RCOO^.. In the whole reaction process, the CO₂ moiety in the complex N3Li(η²-O₂C) maintains a certain radical character at the carbon atom of CO₂ and plays a self-catalyzing role. This work represents the first example of electride-sponsored radical-controlled CO₂ reduction, and thus provides an alternative strategy for CO₂ conversion.     

Transformation of Atmospheric CO2 Catalyzed by Protic Ionic Liquids: Efficient Synthesis of 2‐Oxazolidinones

Protic ionic liquids (PILs), such as 1,8‐diazabicyclo[5.4.0]‐7‐undecenium 2‐methylimidazolide [DBUH][MIm], can catalyze the reaction of atmospheric CO₂ with a broad range of propargylic amines to form the corresponding 2‐oxazolidinones. The products are formed in high yields under mild, metal‐free conditions. The cheaper and greener PILs can be easily recycled and reused at least five times without a decrease in the catalytic activity and selectivity. A reaction mechanism was proposed on the basis of a detailed DFT study which indicates that both the cation and anion of the PIL play key synergistic roles in accelerating the reaction.     

Highly Efficient Porous Carbon Electrocatalyst with Controllable N‐Species Content for Selective CO2 Reduction

We report a straightforward strategy to design efficient N doped porous carbon (NPC) electrocatalyst that has a high concentration of easily accessible active sites for the CO₂ reduction reaction (CO₂RR). The NPC with large amounts of active N (pyridinic and graphitic N) and highly porous structure is prepared by using an oxygen‐rich metal–organic framework (Zn‐MOF‐74) precursor. The amount of active N species can be tuned by optimizing the calcination temperature and time. Owing to the large pore sizes, the active sites are well exposed to electrolyte for CO₂RR. The NPC exhibits superior CO₂RR activity with a small onset potential of ?0.35 V and a high faradaic efficiency (FE) of 98.4 % towards CO at ?0.55 V vs. RHE, one of the highest values among NPC‐based CO₂RR electrocatalysts. This work advances an effective and facile way towards highly active and cost‐effective alternatives to noble‐metal CO₂RR electrocatalysts for practical applications.     

Hydrogen‐Bonded Organic Frameworks (HOFs): A New Class of Porous Crystalline Proton‐Conducting Materials

Two porous hydrogen‐bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra‐high proton conduction values (σ) 0.75× 10^?2 S cm^?1 and 1.8×10^?2 S cm^?1 under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic‐based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen‐bonded porous organic frameworks as solid‐state proton conducting materials.     

Molecular Porous Photosystems Tailored for Long‐Term Photocatalytic CO2 Reduction

The molecular‐level structuration of two full photosystems into conjugated porous organic polymers is reported. The strategy of heterogenization gives rise to photosystems which are still fully active after 4 days of continuous illumination. Those materials catalyze the carbon dioxide photoreduction driven by visible light to produce up to three grams of formate per gram of catalyst. The covalent tethering of the two active sites into a single framework is shown to play a key role in the visible light activation of the catalyst. The unprecedented long‐term efficiency arises from an optimal photoinduced electron transfer from the light harvesting moiety to the catalytic site as anticipated by quantum mechanical calculations and evidenced by in situ ultrafast time‐resolved spectroscopy.     

定向合成带电荷多孔芳香骨架材料用于碘单质的捕获和释放

采用四(4-碘苯基)硼化锂作为四面体基块, 以1,4-苯二硼酸和4,4'-联苯二硼酸作为桥联基团, 通过Suzuki偶联反应成功制备了两种带电荷多孔芳香骨架材料PAF-21和PAF-22. 实验结果证明PAFs具有优异的热稳定性和化学稳定性, 同时材料特有的带电荷芳香骨架导致它们对碘单质具有非常高的亲和力以及吸附能力. 1 g的PAF-21和PAF-22可以分别吸附大约1.52和1.96 g的碘单质. 此外, PAF-21和PAF-22在富集碘单质的过程中可以循环使用. 这类材料非常适合作为新型固体吸附剂用于捕获放射性碘单质.     

Single‐Step Microwave‐Mediated Synthesis of Oxazoles and Thiazoles from 3‐Oxetanone: A Synthetic and Computational Study

The direct microwave‐mediated condensation between 3‐oxetanone and primary amides and thioamides has delivered moderate to good yields of (hydroxymethyl)oxazoles and (hydroxymethyl)thiazoles. The reactions use a sustainable solvent and only require short reaction times. These are highly competitive methods for the construction of two classes of valuable heteroarenes, which bear a useful locus for further elaboration. Electronic structure calculations have shown that the order of events involves chalcogen atom attack at sp³ carbon and alkyl–oxygen cleavage. The critical role of acid catalysis was shown clearly, and the importance of acid strength was demonstrated. The calculated barriers were also fully consistent with the observed order of thioamide and amide reactivity. Spontaneous ring opening involves a modest degree of C? O cleavage, moderating the extent of strain relief. On the acid‐catalysed pathway, C? O cleavage is less extensive still, but proton transfer to the nucleofuge is well advanced with the carboxylic acid catalysts, and essentially complete with methanesulfonic acid.     

N‐Doped Carbon Networks: Alternative Materials Tracing New Routes for Activating Molecular Hydrogen

The fragmentation of molecular hydrogen on N‐doped carbon networks was investigated by using molecular (polyaromatic macrocycles) as well as truncated and periodic (carbon nanotubes) models. The computational study was focused on the ergonicity analysis of the reaction and on the properties of the transition states involved when constellations of three or four pyridinic nitrogen atom defects are present in the carbon network. Calculations show that whenever N‐defects are embedded in species characterized by large conjugated π‐systems, either in polyaromatic macrocycles or carbon nanotubes, the corresponding H₂ bond cleavage is largely exergonic. The fragmentation Gibbs free energy is affected by the final arrangement of the hydrogen atoms on the defect and by the extension of the π‐electron cloud, but it is not influenced by the curvature of the system.