Alkoxide- and hydroxide-induced nucleophilic trifluoromethylation using trifluoromethyl sulfone or sulfoxide

[reaction: see text] The first alkoxide- and hydroxide-induced nucleophilic trifluoromethylation of carbonyl compounds, disulfides, and other electrophiles, using phenyl trifluoromethyl sulfone 1a (sulfoxide 1b) is reported. The trifluoromethyl sulfone 1a or sulfoxide 1b acts as a "CF(3)(-)" synthon. Both sulfone 1a and sulfoxide 1b are commercially available and can also be conveniently prepared from trifluoromethane. The new methodology provides a convenient route for efficient trifluoromethylation.     

DFT study of molecular structure and electronic properties of fluoromethylpyrrole oligomers including di-, tri- and tetramer

Structural and electronic properties of oligomers including dimer, trimer and tetramer of fluoromethylpyrroles (FMPs), NC₄H₄-CH_nF_3−n with n = 0, 1, 2, 3, and their radical cations have been studied using DFT-B3LYP method with 6-31G(d, p) basis set. FMPs are proposed in this research as candidate monomers for conducting polymers with modified characteristics compared to polypyrrole and polymethylpyrrole. A preliminary study using a set of ab initio computations (HF) with medium basis set was carried out on di-, tri- and tetramer in order to investigate the stability of configuration of polymer chains for FMPs. The B3LYP/6-31G** optimized geometry and stereochemistry show that the selectivity of branching of the propagating polymer chain is affected by the characteristics of the substitutions of monomer and, therefore, the growth pattern of the polymer chain can be predicted upon characterization of different centers of the monomers. Also, the results of this study, including quinoid coefficients, orbital energy spacing, charge- and spin-density distributions and electric dipole moment vectors show that conducting polymers consisted of trifluoromethyl pyrrole (Py-CF₃), compared with the other FMPs, are the most favorable to be used as monomers for conducting polymer structural and electronic properties.     

Parallel synthesis of tri- and tetrasubstituted ureas from carbamoyl imidazolium salts

A method for producing tri- and tetrasubstituted ureas from carbamoyl imidazolium salts is presented. Carbamoyl imidazolium salts are prepared from the reaction of N,N carbonyldiimidazole (CDI) with secondary amines, followed by alkylation with iodomethane. These stable salts can be stored for extended periods and are effective electrophilic carbamoylation reagents. Primary and secondary amines add to carbamoyl imidazolium salts at room temperature to give tri- and tetrasubstituted ureas in excellent yields. This reaction was used to synthesize ureas using both liquid-liquid extraction and solid-phase extraction (cation exchange) purification techniques. Liquid-liquid extraction affords the product ureas more cleanly than cationic exchange. A series of urea compounds were synthesized using parallel synthesis techniques in high yields and with suitable purity for routine in vitro biological tests. These studies validate the utility of carbamoyl imidazolium salts as useful building blocks for combinatorial library synthesis.     

On the number of significant mode-mode anharmonic couplings in vibrational calculations: Correlation-corrected vibrational self-consistent field treatment of di-, tri-, and tetrapeptides

A computational study is made of the number of important anharmonic mode-mode couplings in the context of vibrational calculations for di-, tri-, and tetrapeptides. The method employed is the correlation-corrected vibrational self-consistent field (CC-VSCF) algorithm, which includes correlation effects between different vibrational modes. It is found that results of good accuracy can be obtained in calculations that include only N log N mode-mode coupling terms, where N is the number of modes. This simplification significantly accelerates CC-VSCF calculations for large molecules. A criterion based on the characteristics of the normal-mode displacements is employed to predict a priori unimportant coupling terms. The criterion is tested statistically using Spearman's rank correlation coefficient. The results are illustrated by calculations for several di-, tri-, and tetrapeptides using semiempirical PM3 potential surfaces. These results are analyzed and a statistical model for error estimation is given. The decrease in the number of included coupling from N(2) to N log N opens possibilities of anharmonic vibrational calculations for large peptides.     

Synthesis of α‐Trifluoromethylated Ketones from Vinyl Triflates in the Absence of External Trifluoromethyl Sources

A novel method for the conversion of vinyl triflates into α‐trifluoromethylated ketones in the absence of external trifluoromethyl sources is described. This process accomplishes an efficient migration of the trifluoromethyl group of the triflate to the α‐position in the ketone through a radical process. The reaction proceeds by the addition of a trifluoromethyl radical to the vinyl triflate and subsequent fragmentation of the trifluoromethane sulfonyl radical. Based on this reaction, a one‐pot two‐step procedure for the trifluoromethylation of ketones was developed. The method presented herein also allows the transfer of perfluoroalkyl groups from vinyl perfluoroalkanesulfonates, which are readily accessible from alkynes and perfluoroalkanesulfonic acids.     

Synthesis and characterization of a new family of bi-, tri-, tetra-, and pentanuclear ferric complexes

Nine members of a new family of polynuclear ferric complexes have been synthesized and characterized. The reaction of Fe(O(2)CMe)(2) with polydentate Schiff base proligands (H(2)L) derived from salicylidene-2-ethanolamine, followed in some cases by reaction with carboxylic acids, has afforded new complexes of general formulas [Fe(2)(pic)(2)(L)(2)] (where pic(-) is the anion of 2-picolinic acid), [Fe(3)(O(2)CMe)(3)(L)(3)], [Fe(4)(OR)(2)(O(2)CMe)(2)(L)(4)], and [Fe(5)O(OH)(O(2)CR)(4)(L)(4)]. The tri-, tetra-, and pentanuclear complexes all possess unusual structures and novel core topologies. M?ssbauer spectroscopy confirms the presence of high-spin ferric centers in the tri- and pentanuclear complexes. Variable-temperature magnetic measurements suggest spin ground states of S = 0, 1/2, 0, and 5/2 for the bi-, tri-, tetra-, and pentanuclear complexes, respectively. Fits of the magnetic susceptibility data have provided the magnitude of the exclusively antiferromagnetic exchange interactions. In addition, an easy-axis-type magnetic anisotropy has been observed for the pentanuclear complexes, with D values of approximately -0.4 cm(-)(1) determined from modeling the low-temperature magnetization data. A low-temperature micro-SQUID study of one of the pentanuclear complexes reveals magnetization hysteresis at nonzero field. This is attributed to an anisotropy-induced energy barrier to magnetization reversal that is of molecular origin. Finally, an inelastic neutron scattering study of one of the trinuclear complexes has revealed that the magnetic behavior arises from two distinct species.     

A general method for the solid-phase synthesis of unsymmetrical tri- and tetrasubstituted ureas

A general method for the preparation of unsymmetrical di, tri-, and tetrasubstituted ureas on polymer supports is presented. Polymer-bound primary and secondary amines react with imidazolium salts (urea donors), which are generated from the reaction of N,N'-carbonyldiimidazole (CDI) with primary and secondary amines followed by alkylation with MeI to give tri- and tetrasubstituted ureas in excellent yields (76-98%) and purities (80-99%).     

Serendipitous synthesis of 1,1-bisfuryl-1- [5-(tri-2-furylmethyl)]furylmethane by the reaction of tri-2-furylmethane with n-butyllithium

[reaction: see text] In an experiment designed to synthesize the tricarboxaldehyde 2 from tri-2-furylmethane, we observed the serendipitous formation of 1,1-bisfuryl-1-[5-(tri-2-furylmethyl)]furylmethane 3, presumably via the intermediacy of the tri-2-furylmethyl radical.     

Solid-phase synthesis of symmetrical 5',5'-dinucleoside mono-, di-, tri-, and tetraphosphodiesters

Four classes of phosphitylating reagents were subjected to reactions with aminomethyl polystyrene resin-bound p-acetoxybenzyl alcohol to yield the corresponding polymer-bound mono-, di-, tri-, and tetraphosphitylating reagents. The solid-phase reagents were reacted with unprotected nucleosides (e.g., thymidine, adenosine, 3'-azido-3'-deoxythymidine, cytidine, or inosine) in the presence of 5-(ethylthio)-1H-tetrazole. Polymer-bound nucleosides underwent oxidation with tert-butyl hydroperoxide, deprotection of cyanoethoxy groups with DBU, and the acidic cleavage, respectively, to afford 5',5'-dinucleoside mono-, di-, tri-, and tetraphosphodiesters in 59-78% yield.     

Direct selective reductive amination of carbonyl telechelic oligoisoprenes: elaboration of promising tri- and tetrafunctionalized oligoisoprene intermediates

The first selective reductive amination of carbonyl telechelic oligoisoprene (CTPI) using NaBH(OAc)₃ as the reducing agent is described. An access to tri- and tetrafunctionalized oligoisoprenes is realized in two or three steps from CTPI in high yield.     

A rapid and highly selective method for the estimation of pyro-, tri- and orthophosphates

A rapid, highly selective and simple method has been developed for the quantitative determination of pyro-, tri- and orthophosphates. The method is based on the formation of a solid complex of bis(ethylenediamine)cobalt(III) species with pyrophosphate at pH 4.2-4.3, with triphosphate at pH 2.0-2.1 and with orthophosphate at pH 8.2-8.6. The proposed method for pyro- and triphosphates differs from the available method, which is based on the formation of an adduct with tris(ethylenediamine)cobalt(III) species. The complexes have the composition [Co(en)(2)HP(2)O(7)]4H(2)O and [Co(en)(2)H(2)P(3)O(10)]2H(2)O, respectively. The precipitation is instantaneous and quantitative under the recommended optimum conditions giving 99.5% gravimetric yield in both cases. There is no interferences from orthophosphate, trimetaphosphate and pyrophosphate species in the triphosphate estimation up to 5% of each component. The efficacy of the method has been established by determining pyrophosphate and triphosphate contents in various matrices. In the case of orthophosphate, the proposed method differs from the available methods such as ammonium phosphomolybdate, vanadophosphomolybdate and quinoline phosphomolybdate, which are based on the formation of a precipitate, followed by either titrimetry or gravimetry. The precipitation is instantaneous and the method is simple. Under the recommended pH and other reaction conditions, gravimetric yields of 99.6-100% are obtainable. The method is applicable to orthophosphoric acid and a variety of phosphate salts.     

Determination of tri- and tetravalent ions with a divalent ion-selective electrode

A method of determining tri- and tetravalent ions with a divalent ion-selective electrode is proposed. The determination is based on displacement of the divalent metal ion from the Mg-EDTA or Zn-EDTA complex. The approximate ranges for direct measurement are 3·10^-3–3·10^-4M. Titrimetric methods are recommended for analysis of mixtures of metal ions. Optimal pH ranges and precision are discussed.     

The second triannulenylene: tri-[8]annulenylene

Room-temperature dehydrohalogenation of bromocyclooctatetraene (BrC8H7) with potassium tert-butoxide followed (after a couple of minutes) by alkali metal reduction was used to generate the anion radical of tri-[8]annulenylene [(C8H6*-)3] in HMPA. EPR analysis reveals that the odd electron is primarily located in one of the three eight-membered ring systems, which is rendered planar. Excellent agreement was obtained between spin densities predicted by B3LYP/6-31G* calculations and those observed. The neutral tri-[8]annulenylene system has a propensity toward polymerization, but it can be isolated for NMR and mass spectral analysis via the I2 oxidation of the anion radical. The NMR analysis reveals that two of the eight-membered rings are bent above the plane of the benzene ring and the other is bent below. Tri-[6]annulenylene (triphenylene) is the only other known member of the triannulenylenes.     

Preparation of tri- and difluoromethylated amines from aldimines using (trifluoromethyl)trimethylsilane

[reaction: see text] Addition of a trifluoromethyl group into aldimines was accomplished using (trifluoromethyl)trimethylsilane with tetraalkylammonium fluorides as initiators, and the resulting adducts were converted to difluoromethylated imines in the presence of excess fluoride. The imines were reduced to difluoromethylated amines using sodium borohydride.     

Reactions of tri- and hexafluoroacetylacetones and 4-ethoxy-1,1,1-trifluorobut-3-en-2-one with 2-aminobenzohydrazide

Reactions of 1,1,1-trifluoropentane-2,4-dione and 1,1,1,5,5,5-hexafluoropentane-2,4-dione with 2-aminobenzohydrazide afforded (2-aminophenyl)[5-hydroxy-3-methyl-5-(trifluoromethyl)- and (2-aminophenyl)[ 5-hydroxy-3,5-bis(trifluoromethyl)-4,5-dihydropyrazol-1-yl]methanones, respectively. 4-Ethoxy-1,1,1- trifluorobut-3-en-2-one reacted with 2-aminobenzhydrazide to give 2-(trifluoromethyl)-3a,4-dihydropyrazolo-[5,1-{ptb}]quinazolin-9(3{ptH})-one.     

Regioselective trapping of terminal di-, tri-, and tetraynes with benzyl azide

[Structure: see text] The reaction of benzyl azide with terminal di-, tri-, and tetraynes appended with a range of functional groups has been explored. Standard reaction conditions for BnN3 catalyzed by CuSO4.5H2O gave alkynyl, butadiynyl, and hexatriynyl triazoles in moderate to good yields. The reaction proceeds regioselectively as determined by the X-ray crystallographic analysis of three derivatives (1c, 1d, and 3c), and no evidence of multiple azide addition to the polyyne framework is observed.     

Comparative Behavior of Aromatic Disulfide and Diselenide Monolayers on Polycrystalline Gold Films Using Cyclic Voltammetry, STM, and Quartz Crystal Microbalance

A comparative investigation of the self-assembled monolayers of diphenyl disulfide (DDS), diphenyl diselenide (DDSe), and naphthalene disulfide (NDS) on polycrystalline gold films using STM, QCM, and electrochemical techniques is presented. The geometric constraint imposed by the rigid naphthalene ring for NDS inhibits the cleavage of the S-S bond, thus adversely affecting the monolayer organization and stability relative to the monolayers formed with DDS and DDSe. A comparative analysis using techniques like cyclic voltammetry and quartz-crystal microbalance indicates that, for DDS, the facile cleavage of the S-S bond leads to strong binding of the adsorbate molecules at the preferred surface sites, resulting in a rather well-organized self-assembled structure. The STM pattern of NDS reveals a periodic domain (i.e., less than 10 nm in size) while no such small domains are seen in the case of DDS and DDSe due to the orientational flexibility of the rings. Copyright 2001 Academic Press.     

Electrochemical reduction of S-oxides of diphenyl disulfide: Part I. Investigation in aprotic solvents

In the electrochemical reduction of diphenyl disulfide and its four S-oxides in aprotic solvents the sulfur-sulfur bonds is cleaved by two electrons. Diphenyl disulfone and diphenyl disulfide are reduced in one, phenyl benzenethiolsulfonate and phenyl benzenethiolsulfinate in two and benzenesulfinyl phenyl sulfone in three steps. The difference between the polaro-graphic half-wave potential and the peak potential at glassy carbon ranges from 0.3 V for diphenyl disulfone to 0.8 V for diphenyl disulfide. The reduction potentials for the first steps decrease from the sulfinyl sulfone to the disulfide. Thiophenolate and/or benzenesulfinate ions are produced in the coulometric experiments from the electrode reactions coupled with secondary reactions. Phenyl benzenethiolsulfonate or diphenyl disulfide appear as products in the intermediate reduction steps.     

A laser desorption ionization mass spectrometry investigation of triarylboranes and tri-9-anthrylborane photolysis products

Laser desorption ionization (LDI) mass spectra have been obtained for the photolysis products of tri-9-anthrylborane (TAB) in the solvents toluene, cyclohexene, and tetrahydrofuran; and for the solid triarylboranes: TAB, trimesitylborane (TMB), and tri-(2,6-dimethylphenyl)borane (TXyB). The major single solution photolysis product of TAB is 9,9′-dianthryl. Other products are rationalized in terms of an anthrylborylene intermediate (AnthB:). LDI mass spectrometry of the triarylboranes yields molecular ions in good abundance, providing a simple and selective method of characterization. Fragmentation patterns in some cases are interpreted in terms of photochemical reactions prior to ionization.     

Theoretical study on the electronic, structural, properties and reactivity of a series of mono-, di-, tri- and tetrafluorothiophenes as monomers for new conducting polymers

Electrical and structural properties of mono-, di-, tri- and tetrafluorothiophenes and their radical cations have been studied using density functional theory and B3LYP method with 6-311++G** basis set. The effects of the number and position of the substituent of fluorine atoms on the properties of the thiophene ring have been studied using optimized structures obtained for these molecules and their radical cations. Vibrational frequencies, spin-density distribution, size and direction of dipole moment vector, ionization potential, electric polarizability, HOMO-LUMO gaps and NICS values of these compounds have been calculated as well. The analysis of these data showed that double bonds in 3-fluorothiophene are more delocalized and it is the best possible candidate monomer among all fluorothiophenes for the synthesis of corresponding conducting polymers with modified characteristics.