铂银合金的制备及其对甲醇电氧化反应的催化性能

采用一种无需使用任何有机表面活性剂或溶剂的方法，在熔融盐体系中制备了铂银纳米合金颗粒，考察了合金中元素银对碱性电解质中甲醇电氧化反应（MOR）的催化作用。透射电子显微镜表征结果显示，当前躯体铂银物质的量比为1时，可以得到组成为Pt₅₂Ag₄₈的合金纳米管。甲醇电氧化反应测试结果表明，具有干净表面的Pt₅₂Ag₄₈纳米管比常规的Pt黑具有更好的催化性能。Pt₅₂Ag₄₈合金纳米管的催化活性与其最大正扫电位密切相关，正扫电位从-1.0到0.5 V（vs.SCE），MOR峰值电流达到1.61 mA/μg_Pt，是从-1.0到0.1 V（vs.SCE）正扫电位的1.92倍。铂银合金表面层中的Ag元素主要通过在电化学循环中发生氧化还原反应来促进合金的MOR活性。研究结果可以为铂银合金在直接甲醇燃料电池（DMFC）中的应用提供理论支持。     

Electrochemical deposition of platinum nanoparticles in multiwalled carbon nanotube–Nafion composite for methanol electrooxidation

Platinum nanoparticles were successfully deposited within a multiwalled carbon nanotube (MWCNT)–Nafion matrix by a cyclic voltammetry method. A Pt(IV) complex was reduced to platinum nanoparticles on the surface of MWCNTs. The resulting Pt nanoparticles were characterized by scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The Pt–MWCNT–Nafion nanocomposite film-modified glassy carbon electrode had a sharp hydrogen desorption peak at about −0.2 V vs. Ag/AgCl (3 M) in a solution of 0.5 M H₂SO₄, which is directly related to the electrochemical activity of the Pt nanoparticles presented on the surface of MWCNTs. The electrocatalytic properties of the Pt–MWCNT–Nafion nanocomposite-modified glassy carbon electrode for methanol electrooxidation were investigated by cyclic voltammetry in a 2 M CH₃OH + 1 M H₂SO₄ solution. In comparison with the Pt-coated glassy carbon electrode and the Pt–Nafion modified glassy carbon electrode, the Pt–MWCNT–Nafion-modified electrode had excellent electrocatalytic activity toward methanol electrooxidation. The stability of the Pt–MWCNT–Nafion nanocomposite-modified electrode had also been evaluated.     

Nickel foam-based composite electrodes for electrooxidation of methanol

Nickel foam and five nickel foam-based composite electrodes were prepared for being used as anode materials for the electrooxidation of methanol in KOH solution containing 0.1 and 1.0 M of methanol. The layered electrodes composed of nickel foam, platinum nanoparticles, polyaniline (PANI) and/or porous carbon (C) prepared in various assemblies. As shown by SEM analysis, depending on the preparation conditions, the electrodes of different morphologies were obtained. Using the cyclic voltammetry method, the oxidation of methanol on nickel foam electrode was observed in the potential range 0.4 V ↔ 0.7 V, where the Ni(OH)₂/NiOOH transformation occurred. The presence of Pt particles in electrode gave rise to the increase in electrocatalytic activity in this potential range. For electrodes containing dispersed platinum catalyst (Ni/Pt, Ni/PANI/Pt and Ni/C/Pt), the oxidation of methanol was noted also in the potential range −0.5 V ↔ 0.1 V. The electrocatalytic activities of the examined electrodes toward methanol oxidation at low potentials were in order Ni/Pt > Ni/C/Pt > Ni/PANI/Pt, whereas at high potentials in order Ni/PANI/Pt > Ni/Pt> Ni/C/Pt > Ni. Among the examined electrodes, the most resistant to cyclic poisoning appeared to be the Ni/C/Pt electrode. Presented at the 4Th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

One-step electrochemical synthesis of Pt–CeO2 composite thin films on a glassy carbon electrode

A Pt–CeO₂ composite thin film was prepared on a glassy carbon electrode by one-step electrochemical deposition technique. The film was constructed of Pt particles well dispersed and embedded in a porous CeO₂ substrate. The prepared Pt–CeO₂/GC electrode showed a better catalytic performance toward methanol electrooxidation compared with the bulk Pt electrode.     

Technical electrodes catalyzed with PtRu on mesoporous ordered carbons for liquid direct methanol fuel cells

This paper presents the behavior of ordered mesoporous carbon (OMC)-supported catalysts as anodes for direct methanol fuel cells (DMFC), fed with an aqueous methanol solution. OMC samples were prepared by the nanocasting method from a polymerized furan resin using mesoporous silica as a template. Pt and PtRu nanoparticles were supported on OMC with high dispersion, the particle size being 2.4 nm at PtRu loading of 15 wt.%. The resulting catalysts were analyzed using carbon monoxide stripping voltammetry, cyclic voltammetry, and chronoamperometry in three-electrode experiments and recording cell voltage vs. current density curves in practical DMFC. It was found that PtRu-catalyzed technical electrodes exhibited good activity towards methanol electrooxidation in half-cell experiments under fuel-cell-relevant conditions. Specifically, Pt₈₅Ru₁₅/OMC catalyst showed the highest catalytic enhancement compared to Pt/OMC for the steady-state electrooxidation of methanol at 60 °C and 0.5 V, by a factor of 22 in 2-M MeOH solution. DMFC single cells yielded an open-circuit voltage of 0.625 V at 60 °C. Polarization curves indicate that DMFC with OMC-supported Pt₈₅Ru₁₅ catalyst at the anode exhibited the best performance.     

Electrochemical testing of composite electrodes of (La1?x Sr x ) s MnO3 and doped ceria in NO-containing atmosphere

The possibility of using electrochemical cells for removal of NO _x from an exhaust gas with excess O₂ has been examined. (La_1−x Sr _x ) _s MnO₃ (LSM) and ceria doped with Pr or Gd were selected as electrode materials and investigated in three-electrode cells. The electrodes were characterised electrochemically with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), and the gas composition monitored while the electrodes were polarised. The electrodes of (La_0.5Sr_0.5)_0.99MnO₃ (LSM50) and Ce_0.8Pr_0.2O_2−δ exhibit higher current densities in 0.1% NO in Ar than in air at 300 to 400 °C during CV. This indicates some apparent selectivity towards NO compared to O₂. The electrodes can remove NO, when polarised to at least −0.6 V vs. Pt/Air at 600 °C, and EIS measurements under polarisation indicate that the kinetics of the electrodes change, when the electrode potential gets below −0.6 V vs. Pt/Air.     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.     

Characterization and methanol electrooxidation studies of Pt(111)/Os surfaces prepared by spontaneous deposition

Catalytic activity of the Pt(111)/Os surface toward methanol electrooxidation was optimized by exploring a wide range of Os coverage. Various methods of surface analyses were used, including electroanalytical, STM, and XPS methods. The Pt(111) surface was decorated with nanosized Os islands by spontaneous deposition, and the Os coverage was controlled by changing the exposure time to the Os-containing electrolyte. The structure of Os deposits on Pt(111) was characterized and quantified by in situ STM and stripping voltammetry. We found that the optimal Os surface coverage of Pt(111) for methanol electrooxidation was 0.7 +/- 0.1 ML, close to 1.0 +/- 0.1 Os packing density. Apparently, the high osmium coverage Pt(111)/Os surface provides more of the necessary oxygen-containing species (e.g., Os-OH) for effective methanol electrooxidation than the Pt(111)/Os surfaces with lower Os coverage (vs e.g., Ru-OH). Supporting evidence for this conjecture comes from the CO electrooxidation data, which show that the onset potential for CO stripping is lowered from 0.53 to 0.45 V when the Os coverage is increased from 0.2 to 0.7 ML. However, the activity of Pt(111)/Os for methanol electrooxidation decreases when the Os coverage is higher than 0.7 +/- 0.1 ML, indicating that Pt sites uncovered by Os are necessary for sustaining significant methanol oxidation rates. Furthermore, osmium is inactive for methanol electrooxidation when the platinum substrate is absent: Os deposits on Au(111), a bulk Os ingot, and thick films of electrodeposited Os on Pt(111), all compare poorly to Pt(111)/Os. We conclude that a bifunctional mechanism applies to the methanol electrooxidation similarly to Pt(111)/Ru, although with fewer available Pt sites. Finally, the potential window for methanol electrooxidation on Pt(111)/Os was observed to shift positively versus Pt(111)/Ru. Because of the difference in the Os and Ru oxophilicity under electrochemical conditions, the Os deposit provides fewer oxygen-containing species, at least below 0.5 V vs RHE. Both higher coverage of Os than Ru and the higher potentials are required to provide a sufficient number of active oxygen-containing species for the effective removal of the site-blocking CO from the catalyst surface when the methanol electrooxidation process occurs.     

Enhanced Electrocatalytic Activity of Methanol and Ethanol Oxidation in Alkaline Medium at Bimetallic Nanoparticles Electrochemically Decorated Fullerene-C60 Nanocomposite Electrocatalyst: An Efficient Anode Material for Alcohol Fuel Cell Applications

Direct alcohol fuel cells (DAFCs) have been recently playing a pivotal role in electrochemical energy sources and portable electronics. Research in DAFCs has proceeded to engage major attention due to their high catalytic activity, long-term stability, portability, and low cost. Herein, we present a facile surfactant-free route to anchor bimetallic Pd−W nanoparticles supported fullerene-C₆₀ catalyst (Pd-W@Fullerene-C₆₀) for high-performance electrooxidation of alcohols (methanol & ethanol) for DAFCs applications. Structural, elemental composition, and morphological analysis of the proposed catalyst were carried out using UV-Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy-dispersive x-ray spectroscopy (EDX). Electrochemical properties such as electrochemical activity, electrochemical active surface area (ECSA), and long-term stability of the Pd-W@Fullerene-C₆₀ catalyst for ethanol and methanol oxidation in the alkaline medium were explored by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry (CA). Results revealed that the proposed catalyst showed enlarged ECSA, tremendous electrocatalytic activity, high poison tolerance limit, good reproducibility, and enhanced long-term stability as compared to the monometallic catalyst and commercially available catalyst (Pt/C) towards ethanol and methanol oxidation reaction. This enhanced potentiality of the Pd-W@Fullerene-C₆₀ catalyst is due to the synergistic effect of W−Pd nanoparticles and excellent electron kinetic from fullerene support material. These findings strongly suggest the Pd-W@Fullerene-C₆₀ catalyst as potential anode material for the alcohol oxidation reaction.     

Electrocatalytic oxidation of methanol on carbon ceramic electrode modified by platinum nanoparticles incorporated in poly (o-phenylenediamine) film

Carbon ceramic electrode, a new electrode substrate, was prepared by sol–gel procedure and used for the electropolymerization of o-phenylenediamine and incorporation of platinum nanoparticles into the resulting poly(o-phenylenediamine) (PoPD) film. The modified electrode was used for electrooxidation of methanol in 0.3 M H₂SO₄ as supporting electrolyte. The presence of PoPD film increased considerably the efficiency of deposited Pt nanoparticles toward the electrocatalytic oxidation of methanol. The effective parameters on the electrooxidation of methanol, i.e., amounts of polymer and Pt catalyst, medium temperature, working potential limit in anodic direction, and potential scan rate, were investigated, and the results were discussed.     

Pt纳米粒子修饰的多孔硅电极的制备及其电催化性能

通过循环伏安法电沉积使直径约为7 nm的Pt纳米粒子均匀地分散于多孔硅表面, 拟用作微型质子交换膜燃料电池的催化电极. 与刷涂法相比较, 电沉积Pt纳米粒子的多孔硅电极(Pt/Si)呈现出高的Pt利用率和增强的电催化活性. 当Pt载量为0.38 mg•cm−2时, 其电化学活性比表面积高达148 cm2•mg−1, 是刷涂相近质量的纳米Pt/C催化剂的多孔硅电极Pt-C/Si的2倍多；该修饰电极对甲醇氧化也呈现了增强的催化性能和好的稳定性, 在0.5 V(vs SCE)极化1 h后电流密度为4.52 mA•cm−2, 而刷涂了相近Pt量的Pt-C/Si电极的电流密度只有0.36 mA•cm−2.     

Electrochemical studies on Zn deposition and dissolution in sulphate electrolyte

The electrochemical deposition and dissolution of Zn on Pt electrode in sulphate electrolyte was investigated by electrochemical methods in an attempt to contribute to the better understanding of the more complex Zn–Cr alloy electrodeposition process. A decrease of the Zn electrolyte pH (from 5.4 to 1.0) so as to minimise/avoid the formation of hydroxo-products of Cr in the electrolyte for deposition of alloy coatings decreases the current efficiency for the Zn reaction, but the rate of the cathode reaction increases significantly due to intense hydrogen evolution. The results of the investigations in Zn electrolytes with pH 1.0–1.6 indicate that Zn bulk deposition is preceded by hydrogen evolution, stepwise Zn underpotential deposition (UPD) and formation of a Zn–Pt alloy. Hydrogen evolution from H₂O starts in the potential range of Zn bulk deposition. Data obtained from the electrochemical quartz crystal microbalance (EQCM) measurements support the assumption that electrochemical deposition of Zn proceeds at potentials more positive than the reversible potential of Zn. Anodic potentiodynamic curves for galvanostatically and potentiostatically deposited Zn layers provide indirect evidence about the dissolution of Zn from an alloy with the Pt substrate. The presumed potential of co-deposition of Cr (−1.9 V vs. Hg/Hg₂SO₄) is reached at a current density of about 300 mA cm⁻².     

Electrochemical Impedance Spectroscopy and Cyclic Voltammetry of <Emphasis Type="Italic">cis</Emphasis>-[Cr(bipy)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>]I (where bipy: 2,2′-Bipyridine) in Polar Solvents

Cyclic voltammetric studies (CV) on the complex cis-bis(2,2′-bipyridine)bis(thiocyanate)chromium(III) iodide [Cr(bipy)₂(SCN)₂]I (where bipy: 2,2′-bipyridine, C₁₀H₈N₂) were recorded on platinum (Pt) and glassy carbon (GC) electrodes in either acetonitrile (ACN) or acetone (ACE) solvent media including n-tetrabutylammonium hexafluorophosphate (NBu₄PF₆) as supporting electrolyte, at scan rates (v) ranging from 0.05 to 0.12 V⋅s⁻¹. In addition, electrochemical impedance spectroscopic (EIS) measurements in the frequency (f) range from 0.1 Hz to 50 kHz were carried out on GC and Pt electrodes. The half-wave potential (E _1/2) of the redox couple Cr(III)/Cr(II) was determined as −0.84 V and −0.79 V (versus Ag/AgCl) in ACN and ACE, respectively. The heterogeneous electron transfer rate constant (k _s) corresponding to the couple Cr(III)/Cr(II) was found to be greater on GC compared to the Pt electrode. The nature of the solvent medium also affects the kinetics of the investigated couple, to be exact, k _s increases remarkably upon replacement of ACE by ACN. The EIS results indicate that the GC electrode is a better capacitor and provides the smaller charge transfer resistance in ACN.     

Platinum nanocube catalysts for methanol and ethanol electrooxidation

We prepared Pt nanocube catalyst with about 3.6 nm in size by a polyol process in the presence of PVP as a stabilizer and Fe ion as a kinetic controller. The crystal structure of Pt nanocube with {1 0 0} faces was confirmed by field-emission transmission electron microscopy. In a cyclic voltammogram, we found that the Pt nanocube catalyst showed relatively high ratio of the forward anodic peak current to the reverse anodic peak current resulting in less accumulation of residues on the catalyst. The Pt nanocube catalyst with the edge of stepped {1 0 0} faces was preferable to breakage of CH₃OH and CH₃CH₂OH compared to polycrystalline Pt nanocatalyst. In an electrochemical measurement for methanol and ethanol electrooxidation, the Pt nanocube catalyst showed an excellent catalytic activity, i.e., lower onset potential and higher current density, compared to the polycrystalline Pt nanocatalyst.     

Electrocatalytic oxidation of methanol on Pt/NiZn electrode in alkaline medium

In this study, a platinum electrode was coated with NiZn layer (Pt/NiZn) in a nickel-zinc bath by electrodeposition for use as anode material for methanol electrooxidation in alkaline solution. The electrode prepared was etched in a concentrated alkaline solution (30% NaOH) to produce a porous and electrocatalytic surface suitable for use in the methanol electrooxidation (Pt/NiZn). The surface morphologies and compositions of coating before and after alkaline leaching were determined by energy dispersive X-ray (EDX) and scanning electron microscopy (SEM) techniques. The effect of NiZn coated platinum electrode for methanol electrooxidation was investigated in 1 M NaOH solution by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. Methanol electrooxidation on Pt/NiZn electrode was studied at various temperatures and potential scan rates. The results showed that Pt/NiZn electrode behaved as an efficient catalyst for the electrooxidation of methanol in alkaline medium.     

Investigation of the Pt–Ni–Pb/C ternary alloy catalysts for methanol electrooxidation

This research is aimed to increase the activity of anodic catalysts and thus to lower noble metal loading in anodes for methanol electrooxidation. The Pt–Ni–Pb/C catalysts with different molar compositions were prepared. Their performance were tested by using a glassy carbon disk electrode through cyclic voltammetric curves in a solution of 0.5 mol L⁻¹ CH₃OH and 0.5 mol L⁻¹ H₂SO₄. The performances of Pt–Ni–Pb/C catalyst with optimum composition (the molar ratio of Pt/Ni/Pb is 5:4:1) and Pt/C (E-Tek) were also compared. Their particle sizes and structures were determined by means of X-ray diffraction (XRD). The XRD results show, compared with that of Pt/C, the lattice parameter of Pt–Ni–Pb (5:4:1)/C catalyst decreases, its diffraction peaks are shifted slightly to a higher 2θ values. This indicates the formation of an alloy involving the incorporation of Ni and Pb atoms into the fcc structure of Pt. The electrochemical measurement shows the activity of Pt–Ni–Pb/C catalyst with an atomic ratio of 5:4:1 for methanol electrooxidation is the best among all different compositions. The activity of Pt–Ni–Pb (5:4:1)/C catalyst is much higher than that of Pt/C (E-Tek).     

甲醇在欠电位沉积Ru修饰Pt电极上的催化氧化

采用欠电位沉积(upd)方法在Pt 表面沉积亚单层的Ru制备出upd-Ru/Pt 电极. 通过欠电位沉积前后电极在0.5 mol·L-1 H2SO4溶液中循环伏安图-152 - 128 mV(vs Ag/AgCl)电位范围内对氢区的数值积分确定Pt表面Ru 的覆盖度. 用电化学方法测试了甲醇在upd-Ru/Pt电极上的催化氧化, 并讨论分析了欠电位沉积电位和Ru的表面覆盖度对甲醇氧化的影响. 结果表明, Ru能够欠电位沉积到Pt表面. Pt表面欠电位沉积少量的Ru 即能大大促进甲醇的氧化.只要控制upd-Ru的沉积量, upd-Ru原子就能大大促进甲醇氧化而与沉积电位无关. Ru原子对甲醇氧化的促进作用与Ru和Pt是否形成合金无关, 而取决于Ru 在Pt表面的百分含量.     

High performance mesoporous Pt electrode for methanol electrooxidation. A DEMS study

Electrodeposited mesoporous (MP) Pt electrodes were evaluated as catalysts for CO and methanol electrooxidation. Electrochemical analysis reveals a mass activity of 41 Ag⁻¹ at 0.55 V in 1 M CH₃OH, similar to carbon supported catalysts. However, the high current densities are related to low CO₂ conversion efficiencies, as was established by using differential electrochemical mass spectrometry in a thin layer flow cell configuration (TLFC-DEMS). These results can be understood taking into account the especially accessible porous structure of the MP Pt, where the possibility of readsorption of partially oxidized products is low.     

Pt(Cu)/C Electrocatalysts with Low Platinum Content

The structure characteristics and the electrochemical behavior of Pt(Cu)/C electrocatalysts synthesized by consecutive deposition of copper and platinum on carbon-support microparticles is studied. The stability and catalytic activity of Pt(Cu)/C materials in reactions of oxygen electroreduction and methanol electrooxidation are assessed and compared with analogous characteristics of a commercial Pt/C material. It is shown that combining the method of galvanic displacement of Cu by Pt with the additional chemical deposition of Pt favors optimization of the structure and functional characteristics of Pt(Cu)/C electrocatalysts. The effect of thermal treatment on the characteristics and properties of electrocatalysts is studied and the optimal conditions of such pretreatment are revealed.     

Characterization of stainless steel electrode modified by a thin film of polyaniline containing pt particles and its electrocatalytic activity for methanol oxidation

The catalytic behavior of stainless steel (SS) electrode modified by a thin film of polyaniline (PANI) containing platinum particles was studied for electrooxidation of methanol and compared with a platinated Pt/PANI electrode in acidic aqueous solution. Cyclic voltammetry (CV), chronoamperometry, CO stripping techniques were used to investigate electrochemical properties and electrocatalytic activity of SS/PANI/Pt and Pt/PANI/Pt electrodes. The morphology and particle size of Pt catalysts were characterized by Transmission Electron Microscopy (TEM) measurement. The effects of various parameters such as thickness of polymer film, medium temperature and stability of the modified electrodes on methanol oxidation were also investigated. The results indicated that the modified SS electrode exhibited a considerably high electrocatalytic activity on the methanol oxidation as well as the modified Pt electrode.