Study of adsorption behavior of bilirubin on human-albumin monolayer using a quartz crystal microbalance

The quartz crystal microbalance was employed to study the adsorption behavior of bilirubin on human-albumin layer, which was chemically bound to the self-assembled monolayer of 4-aminothiophenol on the surface of a gold electrode of the crystal via glutaraldehyde. A long-time adsorption process of bilirubin that took place on a human-albumin-modified surface was observed, and the adsorption kinetic parameters were estimated from the in situ frequency measurements. The amount of adsorbed bilirubin increased with increasing of both hydrogen ions and bilirubin concentration and was larger than that estimated based on the conclusion that there are two affinity sites for bilirubin per albumin molecule. With the present method, the displacement of bilirubin from an albumin layer caused by aspirin was also examined. QCM measurement provides a facile method for in situ monitoring of the adsorption/desorption of bilirubin on proteins layers.     

Wireless sensing determination of uranium(IV) based on its inhibitory effect on a catalytic precipitation reaction

The adsorption of Eu(III) on multiwalled carbon nanotubes (MWCNTs) as a function of pH, ionic strength and solid contents are studied by batch technique. The results indicate that the adsorption of Eu(III) on MWCNTs is strongly dependent on pH values, dependent on ionic strength at low pH values and independent of ionic strength at high pH values. Strong surface complexation and ion exchange contribute to the adsorption of Eu(III) on MWCNTs at low pH values, whereas surface complexation and surface precipitation are the main adsorption mechanism of Eu(III) on MWCNTs. The desorption of adsorbed Eu(III) from MWCNTs by adding HCl is also studied and the recycling use of MWCNTs in the removal of Eu(III) is investigated after the desorption of Eu(III) at low pH values. The results indicate that adsorbed Eu(III) can be easily desorbed from MWCNTs at low pH values, and MWCNTs can be repeatedly used to remove Eu(III) from aqueous solutions. MWCNTs are suitable material in the preconcentration and solidification of radionuclides from large volumes of aqueous solutions in nuclear waste management.     

The impact of ionic strength and background electrolyte on pH measurements in metal ion adsorption experiments

Our understanding of metal ion adsorption to clay minerals has progressed significantly over the past several decades, and theories have been promulgated to describe and predict the impacts of pH, ionic strength, and background solution composition on the extent of adsorption. Studies evaluating the effects of ionic strength on adsorption typically employ a broad range of background electrolyte concentrations. Measurement of pH in these systems can be inaccurate when pH values are measured with liquid junction pH probes calibrated with standard buffers due to changes in the liquid junction potential between standard, low ionic strength (0.05 M) buffers and high ionic strength solutions (>0.1 M). The objective of this research is to determine the extent of the error in pH values measured at high ionic strength, and to develop an approach for accurately measuring pH over a range of ionic strengths using a combined pH electrode. To achieve this objective, the adsorption of cobalt (10(-5) M) onto gibbsite (10 g/L) from various electrolyte solutions (0.01-1 M) was studied. The pH measurements were determined from calibrations with standard buffers and ionic strength corrected buffer calibrations. The results show a significant effect of the aqueous solution background electrolyte anion and ionic strength on pH measurement. The 0.5 and 1 M ionic strength metal ion adsorption edges shifted to lower pH with increasing ionic strength when pH was calibrated with standard buffers whereas no shift in the adsorption edges was observed when calibrated with ionic strength corrected buffers. Therefore, to obtain an accurate pH measurement, pH calibration should contain the same electrolyte and ionic strength as the samples.     

Adsorption of nitrobenzene from aqueous solution by MCM-41

Adsorption of nitrobenzene onto mesoporous molecular sieves (MCM-41) from aqueous solution has been investigated systematically using batch experiments in this study. Results indicate that nitrobenzene adsorption is initially rapid and the adsorption process reaches a steady state after 1 min. The adsorption isotherms are well described by the Langmuir and the Freundlich models, the former being found to provide the better fit with the experimental data. The effects of temperature, pH, ionic strength, humic acid, and the presence of solvent on adsorption processes are also examined. According to the experimental results, the amount of nitrobenzene adsorbed decreases with an increase of temperature from 278 to 308 K, pH from 1.0 to 11.0, and ionic strength from 0.001 to 0.1 mol/L. However, the amount of nitrobenzene adsorbed onto MCM-41 does not show notable difference in the presence of humic acid. The presence of organic solvent results in a decrease in nitrobenzene adsorption. The desorption process shows a reversibility of nitrobenzene adsorption onto MCM-41. Thermodynamic parameters such as Gibbs free energy are calculated from the experimental data at different temperatures. Based on the results, it suggests that the adsorption is primarily brought about by hydrophobic interaction between nitrobenzene and MCM-41 surface.     

胺基化PGMA交联微球对胆红素的吸附机理

通过胺基与环氧键之间的开环反应, 用己二胺及多乙烯多胺等小分子胺化试剂对聚甲基丙烯酸缩水甘油酯(PGMA)交联微球进行了化学改性, 制得了胺基化的PGMA交联微球, 研究了该功能微球对胆红素的吸附特性, 考察了胺化试剂的分子结构、介质pH值、离子强度及温度等因素对其吸附性能的影响, 较深入地研究了吸附机理. 实验结果表明, 胺基化微球对胆红素具有强吸附作用, 吸附容量可达17.80 mg·g-1, 等温吸附服从Freundlich方程. 胺基化微球与胆红素分子之间的作用力以静电相互作用为主, 同时也存在氢键作用与疏水相互作用. 在pH 值为6 的介质中二者之间的静电作用最强, 胆红素吸附容量最高. 高离子强度不利于静电相互作用, 盐度增大使吸附容量减小. 温度升高有利于疏水相互作用而不利于氢键作用, 两种作用中占优势者主导温度对吸附容量的影响. 用己二胺改性的微球, 由于疏水相互作用的强化以及较长连接臂导致较小的空间位阻, 使其对胆红素的吸附能力明显高于多乙烯多胺改性的微球.     

Adsorption of poly(ethyleneimine) on silica surfaces: effect of pH on the reversibility of adsorption

The role of polymer charge density in the kinetics of the adsorption and desorption, on silica, of the polyelectrolyte poly(ethyleneimine) (PEI) was investigated by stagnation-point flow reflectometry. In the first series of experiments, PEI solutions were introduced at the same ionic strength and pH as the background solvent. It was found that the adsorbed amount of PEI increased by increasing pH. In the second series of investigations, several PEI solutions with ascending pH were introduced consecutively into the cell. In these cases, a stepwise buildup of the adsorbed amount was observed and the "final" adsorbed amounts were observed to be roughly equal with the adsorbed amounts of the first series of measurements at the same pH. Finally, adsorption/desorption experiments were performed where the preadsorption of PEI was followed by the introduction of PEI solutions of descending pH. No desorption was detected when the pH changed from pH = 9.7 to pH = 5.8. However, when there was a 9.7 --> 3.3 or 5.8 --> 3.3 decrease in the pH, the kinetic barriers of desorption seemed to completely disappear and roughly the same adsorbed amount as in the first series of experiments at pH = 3.3 was quickly attained by desorption of the PEI. This study reveals the high impact of pH, affecting parameters such as charge density of the surface and polyelectrolyte as well as the structure of the adsorbed macromolecules, on the desorption properties of weak polyelectrolytes. The observed interfacial behavior of PEI may have some important consequences for the stability of alternating polyelectrolyte multilayers containing weak polyelectrolytes.     

Critical Evaluation of Adsorption–Desorption Hysteresis of Heavy Metal Ions from Carbon Nanotubes: Influence of Wall Number and Surface Functionalization

Single‐, double‐, and multi‐walled carbon nanotubes (SWCNTs, DWCNTs, and MWCNTs), and two oxidized MWCNTs with different oxygen contents (2.51 wt % and 3.5 wt %) were used to study the effect of the wall number and surface functionalization of CNTs on their adsorption capacity and adsorption–desorption hysteresis for heavy metal ions (Ni^II, Cd^II, and Pb^II). Metal ions adsorbed on CNTs could be desorbed by lowering the solution pH. Adsoprtion of heavy metal ions was not completely reversible when the supernatant was replaced with metal ion‐free electrolyte solution. With increasing wall number and amount of surface functional groups, CNTs had more surface defects and exhibited higher adsorption capacity and higher adsorption–desorption hysteresis index (HI) values. The coverage of heavy metal ions on the surface of CNTs, solution pH, and temperature affect the metal ion adsorption–desorption hysteresis. A possible shift in the adsorption mechanism from mainly irreversible to largely reversible processes may take place, as the amount of metal ions adsorbed on CNTs increases. Heavy metal ions may be irreversibly adsorbed on defect sites.     

Sorption of strontium ions from aqueous solutions by oxidized multiwall carbon nanotubes

Multiwall carbon nanotubes (MWCNTs) oxidized by nitric acid solution were used to investigate the adsorption behavior of strontium from aqueous solutions similar to the nuclear waste media. The physical properties of both as produced and oxidized MWCNTs were studied by Boehm’s titration method and nitrogen adsorption/desorption. The results showed that the surface properties of MWCNTs such as specific surface area, functional groups and the total number of acid sites were improved after oxidation. Furthermore, the effect of solution conditions such as initial concentration of strontium(II), pH, ionic strength, MWCNT concentration and contact time were studied at room temperature. The results of this study showed that the adsorption of strontium(II) was significantly influenced by the pH value and the solution ionic strength. According to the Langmuir model, the maximum adsorption capacities of strontium(II) onto the as produced and oxidized MWCNTs were obtained as 1.62 and 6.62 mg g^?1, respectively. The contact time to reach equilibrium was 100 min. The good adsorption of strontium(II) on oxidized MWCNTs at the lower ionic strength, the relatively high pH and the short equilibrium time indicate that the oxidized MWCNTs have great potential applications in the field of the environmental protection.     

QCM study of the adsorption of polyelectrolyte covered mesoporous TiO2 nanocontainers on SAM modified Au surfaces

Mesoporous TiO(2) nanocontainers (NCs) covered with polyelectrolyte multilayers were adsorbed on self-assembled monolayer (SAM) modified gold substrates at different values of pH and ionic strength. The adsorption process was followed in situ by means of a quartz crystal microbalance (QCM) and the morphology of the adsorbate was investigated by means of FE-SEM images taken of the substrates after each adsorption process. Deposition could be achieved if either the particles and the surface had opposite charge, or if the salt concentration was sufficiently high, reducing the repulsion between the spheres and the surface. In the latter case the adsorption kinetics could be explained in the context of the DLVO-theory. Using conditions of like charges, one has a means to control the speed of deposition by means of ionic strength. However, interparticle aggregation and cluster deposition on the surface were observed at high ionic strength. Such conditions have to be avoided to obtain a uniform deposition of separated nanocontainers on the surface.     

Competitive adsorption of Ca2+ and Zn(II) ions at monodispersed SiO2/electrolyte solution interface

A study of competitive adsorption of Ca(2+) and Zn(II) ions at the monodispersed SiO(2)/electrolyte solution interface is presented. Influence of ionic strength, pH, and presence of other ions on adsorption of Ca(2+) and Zn(II) in the mentioned system are investigated. zeta potential, surface charge density, adsorption density, pH(50%), and DeltapH(10-90%) parameters for different concentrations of carrying electrolyte and adsorbed ions are also presented. A high concentration of zinc ions shifts the adsorption edge of Ca(2+) ions adsorbed from solutions with a low initial concentration at the SiO(2)/NaClO(4) solution interface to the higher pH values. This effect disappears with a concentration increase of calcium ions. The presence of Ca(2+) ions in the system slightly affects the adsorption of zinc ions on SiO(2), shifting the adsorption edge toward lower pH values and thereby increasing the adsorption slope.     

氨基葡聚糖对水溶液中铜离子的吸附与脱附

自虾、蟹壳等水产加工废料中提取的甲壳质,经脱乙酰基反应,可得氨基葡聚糖,单体结构可表示为左图。该碱性多糖无毒,不溶于水及碱性溶液,在pH～4.5的稀酸中会溶涨,酸性更强时可溶解并成盐。若要求该聚合物以稳定的固态存在于水中,介质的酸性只允许在很小的范围内变化。聚糖中的氨基与过渡金属离子有良好的螯合作用,可作为固体吸附剂吸附水中微量的有害重金属离子。据文献报导,这类吸附大多呈Langmuir型,但Pb(Ⅱ)与Cr(Ⅲ)是例外,它们的吸附等温线表现出单层吸附饱和后,又呈现多层吸附的特征。扫描电镜的照片表明聚糖吸附Pb(Ⅱ)、Cr(Ⅲ)后,表面有瘤状小结节生成。溶液pH升高有利于重     

壳聚糖微球负载的己二胺型聚酰胺-胺树状大分子的制备及对胆红素的吸附

通过反相悬浮反应制备了戊二醛交联的壳聚糖微球。以所制备的壳聚糖微球为载体,合成了己二胺型低代数聚酰胺-胺（Polyamidoamine,简称PAMAM）树枝状大分子（Genaration≤3）。考察了该微球在生理条件下对水溶液中胆红素的吸附行为,以及溶液的pH值,离子强度,温度,胆红素初始浓度,牛血清白蛋白等因素对吸附的影响。结果表明,吸附剂对胆红素具有良好的吸附性能,CS-G2.0,CS-G3.0,CS-G1.0,CS-G0和CS微球的平衡吸附率分别为94.61%,93.44%,92.97%,86.47%,52.38%,CS-G1.0-G3.0微球在0.5h吸附率已经超过70%,1h基本接近平衡,对胆红素的吸附量高达42.78mg/g。     

Solute distribution and stability in emulsion-based delivery systems: an EPR study

Adsorption and desorption of human serum albumin (HSA) from aqueous solutions on mica were studied using AFM and in situ streaming potential measurements. A quantitative interpretation of these experiments was achieved in terms of the theoretical model postulating a 3D adsorption of HSA molecules as discrete particles. These measurements, performed for various ionic strength, allowed one to determine the coverage of HSA as a function of the zeta potential of mica. This allowed one to determine the amount of irreversibly bound HSA as a function of the ionic strength. It was found that the coverage of irreversibly adsorbed HSA increased from 0.52 mg m(-2) for I=1.3×10(-3) M to 1.6 mg m(-2) for I=0.15M (pH=3.5). The significant role of ionic strength was attributed to the lateral electrostatic repulsion among adsorbed HSA molecules, positively charged at this pH value. This was quantitatively interpreted in terms of the effective hard particle concept previously used for colloid particles. The experimental results confirmed that monolayers of irreversibly bound HSA of a well-controlled coverage can be produced by adjusting the ionic strength of the suspension.     

Hydrogen-bonded macrocluster formation of ethanol on silica surfaces in cyclohexane(1)

Adsorption of ethanol onto silica surfaces from ethanol-cyclohexane binary liquids was investigated by a combination of colloidal probe atomic force microscopy, adsorption excess isotherm measurement, and FTIR spectroscopy using the attenuated total reflection (ATR) mode. An unusually long-range attraction was found between the silica (glass) surfaces in the presence of ethanol in the concentration range of 0.1-1.4 mol % at room temperature. At 0.1 mol % ethanol, the attraction appeared at a distance of 35 +/- 3 nm and turned into a repulsion below 3.5 +/- 1.5 nm upon compression. Half of the attraction range agreed with the adsorption layer thickness estimated from the adsorption excess amount by assuming that the adsorption layer was composed only of ethanol. This indicated that the observed long-range attraction was caused by the contact of opposed adsorption layers of ethanol on the silica surfaces and that the sharp increase of repulsion at shorter distance was caused by the overlap of structured ethanol clusters adjacent to the surface. ATR-FTIR spectra demonstrated that ethanol adsorbed on the silica (silicon oxide) surfaces formed hydrogen-bonded clusters (polymers). Practically no ethanol clusters were formed on the hydrogen-terminated silicon surface. These results indicated that the cluster formation involved hydrogen-bonding interactions between surface silanol groups and ethanol hydroxyl groups in addition to those between ethanol hydroxyl groups. At higher temperatures (30-50 degrees C), the range and the strength of attraction decreased owing to the decrease in the hydrogen-bonded clusters monitored by FTIR spectroscopy, reflecting the nature of hydrogen bonding. The range and the strength of the attraction also changed when the ethanol concentration increased: The long-range attraction started to decrease at 0.6 mol % ethanol at room temperature and disappeared at 1.4 mol % while the adsorption excess amount remained almost constant as did the FTIR peak intensity of the hydrogen-bonded OH group of adsorbed ethanol. In the bulk solution, ethanol clusters appeared at 0.5 mol % ethanol; thus, this change in the attraction could be accounted for in terms of the exchange of ethanol molecules between the surface clusters and bulk clusters. The novel self-assembled structure of alcohol on the surface, found in this study may be called a "surface molecular macrocluster" because the hydrogen-bonded clusters extend to distances of ca. 20 nm longer than the typical sizes of common clusters, 2-4 nm, of alcohol (e.g., ethanol).     

Effects of carboxyl groups on the adsorption behavior of low-molecular-weight substances on a stainless steel surface

The adsorption isotherms of various carboxylic acids and several amines on a stainless steel surface were taken as a function of pH and the ionic strength of the solution at 30 degrees C. In particular, the effect of the number of carboxyl groups on the adsorption behavior was investigated. Monocarboxylic acids such as benzoic acid and n-butyric acid were reversibly adsorbed on the stainless steel particles and showed a Langmuir-type adsorption isotherm, i.e., Q=KqmC/(1+KC), where Q and C are, respectively, the amount of adsorbate adsorbed and the equilibrium concentration in the bulk solution, qm, the maximum adsorbed amount, and K is the adsorption equilibrium constant. Carboxylic acids having plural carboxyl groups had much higher affinity to the surface and were adsorbed in both reversible and irreversible modes. The adsorption isotherms for the carboxylic acids having plural carboxyl groups could be expressed by a modified Langmuir-type adsorption isotherm, i.e., Q=q(irrev)+Kq(rev)C/(1+KC), where q(irrev) and q(rev) are, respectively, the maximum amounts adsorbed irreversibly and reversibly. The K and q(irrev) values increased with an increase in the number of carboxyl groups except for isophthalic acid and terephthalic acid. On the basis of the pH dependencies of K, qm, q(irrev), and q(rev) as well as the surface properties of the stainless steel, both reversible and irreversible adsorptions were considered to occur through the electrostatic interaction between negatively charged carboxyl groups and the positively charged sites on the surface. The dependency of the q(irrev) value on ionic strength was discussed on the basis of the differences in their adsorbed state with the interaction forces to the surface and repulsive forces among the adsorbed molecules. The adsorption of amine components was quite weak. The RA-IR and molecular dynamics calculation were done to investigate the adsorption states of phthalic acid, trimellitic acid, and mellitic acid.     

Protein interactions with model chromatographic stationary phases constructed using self-assembled monolayers

Model surfaces representative of chromatographic stationary phases were developed by immobilising an homologous series (C2-C18) of n-alkylthiols, mixed monolayers of C4/C18 and thioalkanes with alcohol, carboxylic acid, amino and sulphonic acid terminal groups onto a flat, silver-coated glass surface using self-assembled monolayer (SAM) chemistry. The processes of adsorption and desorption of serum albumins onto the monolayer surfaces was monitored in real-time using surface plasmon resonance (SPR). Alkyl-terminated SAMs all showed a strong adsorption of bovine serum albumin which was largely independent of alkyl chain length, the ratio of mixed C4/C18 SAMs or the solution pH/ionic strength. The adsorption of human serum albumin to carboxylic and amine terminated SAMs was shown to be predominantly via non-electrostatic interactions (hydrophobic or hydrogen bonding). However, sulphonic acid terminated SAMs showed almost exclusively electrostatic interactions with human serum albumin. This preliminary work using self-assembled monolayer chemistry confirms the usefulness of well characterised SAMs surfaces for investigating protein adsorption and desorption onto/from model chromatography surfaces and gives some guidance for selecting appropriate functionalities to develop better surfaces for chromatography and electrophoresis.     

The role of variable surface charge and surface complexation in the adsorption of humic acid on magnetite

The ionic strength dependence of humic acid (HA) adsorption on magnetite (Fe₃O₄) was investigated at pH 5, 8 and 9, where variable charged magnetite is positive, neutral and negative, respectively. The adsorption studies revealed that HA has high affinity to magnetite surface especially at lower pH, where interacting partners have opposite charges. However, in spite of electrostatic repulsion at pH 9 notable amounts of humate are adsorbed. Increasing ionic strength enhances HA adsorption at each pH due to charge screening. The dominant interaction is probably a ligand-exchange reaction, nevertheless the Coulombic contribution to the organic matter accumulation on oxide surface is also significant under acidic condition. The results from size exclusion chromatography demonstrate that the smaller size HA fractions enriched with functional groups are adsorbed preferentially on the surface of magnetite at pH 8 in dilute NaCl solution.     

Dissipation-enhanced quartz crystal microbalance studies on the experimental parameters controlling the formation of supported lipid bilayers

We report on the investigations of the transformation of spherically closed lipid bilayers to supported lipid bilayers in aqueous media in contact with SiO(2) surfaces. The adsorption kinetics of small unilamellar vesicles composed of dimyristoyl- (DMPC) and dipalmitoylphosphatidylcholine (DPPC) mixtures on SiO(2) surfaces were investigated using a dissipation-enhanced quartz crystal microbalance (QCM-D) as a function of buffer (composition and pH), lipid concentration (0.01-1.0 mg/mL), temperature (15-37 degrees C), and lipid composition (DMPC and DMPC/DPPC mixtures). The lipid mixtures used here possess a phase transition temperature (T(m)) of 24-33 degrees C, which is close to the ambient temperature or above and thus considerably higher than most other systems studied by QCM-D. With HEPES or Tris.HCl containing sodium chloride (150 mM) and/or calcium chloride (2 mM), intact vesicles adsorb on the surface until a critical density ((c)) is reached. At close vesicle contact the transformation from vesicles to supported phospholipid bilayers (SPBs) occurs. In absence of CaCl(2), the kinetics of the SPB formation process are slowed, but the passage through (c) is still observed. The latter disappears when buffers with low ionic strength were used. SPB formation was studied in a pH range of 3-10, yet the passage through (c) is obtained only for pH values above to the physiological pH (7.4-10). With an increasing vesicle concentration, (c) is reached after shorter exposure times. At a vesicle concentration of 0.01-1 mg/mL, vesicle fusion on SiO(2) proceeds with the same pathway and accelerates roughly proportionally. In contrast, the pathway of vesicle fusion is strongly influenced by the temperature in the vicinity of T(m). Above and around the T(m), transformation of vesicles to SPB proceeds smoothly, while below, a large number of nonruptured vesicles coexist with SPB. As expected, the physical state of the membrane controls the interaction with both surface and neighboring vesicles.     

pH-Dependent force spectroscopy of tri(ethylene glycol)- and methyl-terminated self-assembled monolayers adsorbed on gold

Self-assembled monolayers (SAMs) of methoxy-tri(ethylene glycol)- (EG(3)-OMe) and methyl-terminated alkanethiols (C(16)) adsorbed on polycrystalline gold were investigated by chemical force spectroscopy. Measurements were performed in aqueous electrolyte solutions depending on ionic strength and pH value. Charged and hydrophobic tips were employed as probes to mimic local patches of proteins and to study the interaction at the organic/liquid interface in detail. Force-distance curves reveal information about the origin of the observed interaction and the underlying mechanisms. The measurements confirm an effective negative surface charge to be present at the oligo(ethylene glycol) (OEG) and the methyl interface and suggest that the charges are due to the adsorption of hydroxyl ions from aqueous solution. pH-dependent measurements further support the robustness of the established charge associated with the OEG films. Its sign does not change over the whole range of investigated values between pH approximately 3.5 and approximately 10. In contrast, the hydrophobic self-assembled hexadecanethiol films on gold show an isoelectric point (IEP) around pH 4. While the mechanism of charge establishment appears to be similar for both SA films, the strength of hydrogen bonding to interfacial water, which acts as a template for hydroxyl ion adsorption, is likely to be responsible for the observed difference.     

On the Use of the Hypothesis of Statistically Homogeneous Suspensions in the Calculation of Their Conductivity

Electrostatic effects on protein adsorption were investigated using differential scanning calorimetry (DSC) and adsorption isotherms. The thermal denaturation of lysozyme, ribonuclease A (RNase), and alpha-lactalbumin in solution and adsorbed onto silica nanoparticles was examined at three concentrations of cations: 10 and 100 mM of sodium and 100 mM of sodium to which 10 mM of calcium was added. The parameters investigated were the denaturation enthalpy (DeltaH), the temperature at which the denaturation transition was half-completed (T(m)), and the temperature range of the denaturation transition. For lysozyme and RNase, adsorption isotherms depend strongly on the ionic strength. At low ionic strength both proteins have a high affinity for the silica particles and adsorption is accompanied by a 15-25% reduction in DeltaH and a 3-6 degrees C decrease in T(m), indicating that the adsorbed state of the proteins is destabilized. Also, an increase in the width of the denaturation transition is observed, signifying a larger conformational heterogeneity of the surface bound proteins. At higher ionic strengths, both with and without the addition of calcium, no significant adsorption-induced alteration in DeltaH was observed for all three proteins. The addition of calcium, however, decreases the width of the denaturation transition for lysozyme and RNase in the adsorbed state. Copyright 2001 Academic Press.